- 22 Mar, 2023 1 commit
-
-
Harshitha Prem authored
Perform dma_sync_single_for_cpu() on monitor ring rx buffer before reading BUFFER_DONE tag and do dma_unmap_single() only after device had set BUFFER_DONE tag to the buffer. Also when BUFFER_DONE tag is not set, allow the buffer to get read next time without freeing skb. This helps to fix AP+Monitor VAP with flood traffic scenario to see monitor ring rx buffer overrun missing BUFFER_DONE tag to be set. Also remove redundant rx dma buf free performed on DP rx_mon_status_refill_ring. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by:
Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230309164434.32660-1-quic_hprem@quicinc.com
-
- 15 Mar, 2023 5 commits
-
-
Aditya Kumar Singh authored
Currently, in ath11k_ahb_fw_resources_init(), iommu domain mapping is done only for the chipsets having fixed firmware memory. Also, for such chipsets, mapping is done only if it does not have TrustZone support. During deinitialization, only if TrustZone support is not there, iommu is unmapped back. However, for non fixed firmware memory chipsets, TrustZone support is not there and this makes the condition check to true and it tries to unmap the memory which was not mapped during initialization. This leads to the following trace - [ 83.198790] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 83.259537] Modules linked in: ath11k_ahb ath11k qmi_helpers .. snip .. [ 83.280286] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 83.287228] pc : __iommu_unmap+0x30/0x140 [ 83.293907] lr : iommu_unmap+0x5c/0xa4 [ 83.298072] sp : ffff80000b3abad0 .. snip .. [ 83.369175] Call trace: [ 83.376282] __iommu_unmap+0x30/0x140 [ 83.378541] iommu_unmap+0x5c/0xa4 [ 83.382360] ath11k_ahb_fw_resource_deinit.part.12+0x2c/0xac [ath11k_ahb] [ 83.385666] ath11k_ahb_free_resources+0x140/0x17c [ath11k_ahb] [ 83.392521] ath11k_ahb_shutdown+0x34/0x40 [ath11k_ahb] [ 83.398248] platform_shutdown+0x20/0x2c [ 83.403455] device_shutdown+0x16c/0x1c4 [ 83.407621] kernel_restart_prepare+0x34/0x3c [ 83.411529] kernel_restart+0x14/0x74 [ 83.415781] __do_sys_reboot+0x1c4/0x22c [ 83.419427] __arm64_sys_reboot+0x1c/0x24 [ 83.423420] invoke_syscall+0x44/0xfc [ 83.427326] el0_svc_common.constprop.3+0xac/0xe8 [ 83.430974] do_el0_svc+0xa0/0xa8 [ 83.435659] el0_svc+0x1c/0x44 [ 83.438957] el0t_64_sync_handler+0x60/0x144 [ 83.441910] el0t_64_sync+0x15c/0x160 [ 83.446343] Code: aa0103f4 f9400001 f90027a1 d2800001 (f94006a0) [ 83.449903] ---[ end trace 0000000000000000 ]--- This can be reproduced by probing an AHB chipset which is not having a fixed memory region. During reboot (or rmmod) trace can be seen. Fix this issue by adding a condition check on firmware fixed memory hw_param as done in the counter initialization function. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: f9eec494 ("ath11k: Add support for targets without trustzone") Signed-off-by:
Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Address 25 of the following warnings found with GCC-13 and -fstrict-flex-arrays=3 enabled: drivers/net/wireless/ath/ath11k/debugfs_htt_stats.c:30:51: warning: array subscript <unknown> is outside array bounds of ‘const u32[0]’ {aka ‘const unsigned int[]’} [-Warray-bounds=] This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/266 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Harshit Mogalapalli authored
Smatch Warns: drivers/net/wireless/ath/ath12k/pci.c:1198 ath12k_pci_probe() warn: missing unwind goto? Store the error value in ret and use correct label with a goto. Only Compile tested, found with Smatch. Fixes: d8899132 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Reported-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/all/Y+426q6cfkEdb5Bv@kili/Suggested-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by:
-
Vladimir Lypak authored
Pronto v3 has a different DXE address than prior Pronto versions. This patch changes the macro to return the correct register address based on the pronto version. Signed-off-by:
Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by:
Sireesh Kodali <sireeshkodali1@gmail.com> Signed-off-by:
-
Bastian Germann authored
The USB device 1668:1200 is Qwest/Actiontec 802AIN which is also correctly claimed to be supported by carl9170. Supposedly, the successor 802AIN2 has an ath9k compatible chip whose USB ID (unknown) could be inserted instead. Drop the ID from the wrong driver. I happened to find this by chance while packaging the ath9k and carl9170 firmware for Debian. Signed-off-by:
Bastian Germann <bage@debian.org> Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
- 13 Mar, 2023 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v6.4. Major changes: ath10k * enable threaded napi on WCN3990 ath11k * push MU-MIMO params from hostapd to hardware * tx ack signal support for management packets
-
Jisoo Jang authored
Fix a slab-out-of-bounds read that occurs in kmemdup() called from brcmf_get_assoc_ies(). The bug could occur when assoc_info->req_len, data from a URB provided by a USB device, is bigger than the size of buffer which is defined as WL_EXTRA_BUF_MAX. Add the size check for req_len/resp_len of assoc_info. Found by a modified version of syzkaller. [ 46.592467][ T7] ================================================================== [ 46.594687][ T7] BUG: KASAN: slab-out-of-bounds in kmemdup+0x3e/0x50 [ 46.596572][ T7] Read of size 3014656 at addr ffff888019442000 by task kworker/0:1/7 [ 46.598575][ T7] [ 46.599157][ T7] CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G O 5.14.0+ #145 [ 46.601333][ T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 46.604360][ T7] Workqueue: events brcmf_fweh_event_worker [ 46.605943][ T7] Call Trace: [ 46.606584][ T7] dump_stack_lvl+0x8e/0xd1 [ 46.607446][ T7] print_address_description.constprop.0.cold+0x93/0x334 [ 46.608610][ T7] ? kmemdup+0x3e/0x50 [ 46.609341][ T7] kasan_report.cold+0x79/0xd5 [ 46.610151][ T7] ? kmemdup+0x3e/0x50 [ 46.610796][ T7] kasan_check_range+0x14e/0x1b0 [ 46.611691][ T7] memcpy+0x20/0x60 [ 46.612323][ T7] kmemdup+0x3e/0x50 [ 46.612987][ T7] brcmf_get_assoc_ies+0x967/0xf60 [ 46.613904][ T7] ? brcmf_notify_vif_event+0x3d0/0x3d0 [ 46.614831][ T7] ? lock_chain_count+0x20/0x20 [ 46.615683][ T7] ? mark_lock.part.0+0xfc/0x2770 [ 46.616552][ T7] ? lock_chain_count+0x20/0x20 [ 46.617409][ T7] ? mark_lock.part.0+0xfc/0x2770 [ 46.618244][ T7] ? lock_chain_count+0x20/0x20 [ 46.619024][ T7] brcmf_bss_connect_done.constprop.0+0x241/0x2e0 [ 46.620019][ T7] ? brcmf_parse_configure_security.isra.0+0x2a0/0x2a0 [ 46.620818][ T7] ? __lock_acquire+0x181f/0x5790 [ 46.621462][ T7] brcmf_notify_connect_status+0x448/0x1950 [ 46.622134][ T7] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 46.622736][ T7] ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0 [ 46.623390][ T7] ? find_held_lock+0x2d/0x110 [ 46.623962][ T7] ? brcmf_fweh_event_worker+0x19f/0xc60 [ 46.624603][ T7] ? mark_held_locks+0x9f/0xe0 [ 46.625145][ T7] ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0 [ 46.625871][ T7] ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0 [ 46.626545][ T7] brcmf_fweh_call_event_handler.isra.0+0x90/0x100 [ 46.627338][ T7] brcmf_fweh_event_worker+0x557/0xc60 [ 46.627962][ T7] ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 [ 46.628736][ T7] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 46.629396][ T7] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 46.629970][ T7] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 46.630649][ T7] process_one_work+0x92b/0x1460 [ 46.631205][ T7] ? pwq_dec_nr_in_flight+0x330/0x330 [ 46.631821][ T7] ? rwlock_bug.part.0+0x90/0x90 [ 46.632347][ T7] worker_thread+0x95/0xe00 [ 46.632832][ T7] ? __kthread_parkme+0x115/0x1e0 [ 46.633393][ T7] ? process_one_work+0x1460/0x1460 [ 46.633957][ T7] kthread+0x3a1/0x480 [ 46.634369][ T7] ? set_kthread_struct+0x120/0x120 [ 46.634933][ T7] ret_from_fork+0x1f/0x30 [ 46.635431][ T7] [ 46.635687][ T7] Allocated by task 7: [ 46.636151][ T7] kasan_save_stack+0x1b/0x40 [ 46.636628][ T7] __kasan_kmalloc+0x7c/0x90 [ 46.637108][ T7] kmem_cache_alloc_trace+0x19e/0x330 [ 46.637696][ T7] brcmf_cfg80211_attach+0x4a0/0x4040 [ 46.638275][ T7] brcmf_attach+0x389/0xd40 [ 46.638739][ T7] brcmf_usb_probe+0x12de/0x1690 [ 46.639279][ T7] usb_probe_interface+0x2aa/0x760 [ 46.639820][ T7] really_probe+0x205/0xb70 [ 46.640342][ T7] __driver_probe_device+0x311/0x4b0 [ 46.640876][ T7] driver_probe_device+0x4e/0x150 [ 46.641445][ T7] __device_attach_driver+0x1cc/0x2a0 [ 46.642000][ T7] bus_for_each_drv+0x156/0x1d0 [ 46.642543][ T7] __device_attach+0x23f/0x3a0 [ 46.643065][ T7] bus_probe_device+0x1da/0x290 [ 46.643644][ T7] device_add+0xb7b/0x1eb0 [ 46.644130][ T7] usb_set_configuration+0xf59/0x16f0 [ 46.644720][ T7] usb_generic_driver_probe+0x82/0xa0 [ 46.645295][ T7] usb_probe_device+0xbb/0x250 [ 46.645786][ T7] really_probe+0x205/0xb70 [ 46.646258][ T7] __driver_probe_device+0x311/0x4b0 [ 46.646804][ T7] driver_probe_device+0x4e/0x150 [ 46.647387][ T7] __device_attach_driver+0x1cc/0x2a0 [ 46.647926][ T7] bus_for_each_drv+0x156/0x1d0 [ 46.648454][ T7] __device_attach+0x23f/0x3a0 [ 46.648939][ T7] bus_probe_device+0x1da/0x290 [ 46.649478][ T7] device_add+0xb7b/0x1eb0 [ 46.649936][ T7] usb_new_device.cold+0x49c/0x1029 [ 46.650526][ T7] hub_event+0x1c98/0x3950 [ 46.650975][ T7] process_one_work+0x92b/0x1460 [ 46.651535][ T7] worker_thread+0x95/0xe00 [ 46.651991][ T7] kthread+0x3a1/0x480 [ 46.652413][ T7] ret_from_fork+0x1f/0x30 [ 46.652885][ T7] [ 46.653131][ T7] The buggy address belongs to the object at ffff888019442000 [ 46.653131][ T7] which belongs to the cache kmalloc-2k of size 2048 [ 46.654669][ T7] The buggy address is located 0 bytes inside of [ 46.654669][ T7] 2048-byte region [ffff888019442000, ffff888019442800) [ 46.656137][ T7] The buggy address belongs to the page: [ 46.656720][ T7] page:ffffea0000651000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x19440 [ 46.657792][ T7] head:ffffea0000651000 order:3 compound_mapcount:0 compound_pincount:0 [ 46.658673][ T7] flags: 0x100000000010200(slab|head|node=0|zone=1) [ 46.659422][ T7] raw: 0100000000010200 0000000000000000 dead000000000122 ffff888100042000 [ 46.660363][ T7] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 46.661236][ T7] page dumped because: kasan: bad access detected [ 46.661956][ T7] page_owner tracks the page as allocated [ 46.662588][ T7] page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP), pid 7, ts 31136961085, free_ts 0 [ 46.664271][ T7] prep_new_page+0x1aa/0x240 [ 46.664763][ T7] get_page_from_freelist+0x159a/0x27c0 [ 46.665340][ T7] __alloc_pages+0x2da/0x6a0 [ 46.665847][ T7] alloc_pages+0xec/0x1e0 [ 46.666308][ T7] allocate_slab+0x380/0x4e0 [ 46.666770][ T7] ___slab_alloc+0x5bc/0x940 [ 46.667264][ T7] __slab_alloc+0x6d/0x80 [ 46.667712][ T7] kmem_cache_alloc_trace+0x30a/0x330 [ 46.668299][ T7] brcmf_usbdev_qinit.constprop.0+0x50/0x470 [ 46.668885][ T7] brcmf_usb_probe+0xc97/0x1690 [ 46.669438][ T7] usb_probe_interface+0x2aa/0x760 [ 46.669988][ T7] really_probe+0x205/0xb70 [ 46.670487][ T7] __driver_probe_device+0x311/0x4b0 [ 46.671031][ T7] driver_probe_device+0x4e/0x150 [ 46.671604][ T7] __device_attach_driver+0x1cc/0x2a0 [ 46.672192][ T7] bus_for_each_drv+0x156/0x1d0 [ 46.672739][ T7] page_owner free stack trace missing [ 46.673335][ T7] [ 46.673620][ T7] Memory state around the buggy address: [ 46.674213][ T7] ffff888019442700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 46.675083][ T7] ffff888019442780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 46.675994][ T7] >ffff888019442800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 46.676875][ T7] ^ [ 46.677323][ T7] ffff888019442880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 46.678190][ T7] ffff888019442900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 46.679052][ T7] ================================================================== [ 46.679945][ T7] Disabling lock debugging due to kernel taint [ 46.680725][ T7] Kernel panic - not syncing: Reviewed-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Jisoo Jang <jisoo.jang@yonsei.ac.kr> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230309104457.22628-1-jisoo.jang@yonsei.ac.kr
-
Dongliang Mu authored
drivers/net/wireless/realtek/rtw88/usb.c:876 rtw_usb_probe() warn: 'hw' from ieee80211_alloc_hw() not released on lines: 811 Fix this by modifying return to a goto statement. Signed-off-by:
Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Ching-Te Ku authored
To support v5 version firmware cycle report, apply the related structure and functions. v5 cycle report add a group of status to show how the free-run/TDMA training goes to. It is a firmware mechanism that can auto adjust coexistence mode between TDMA and free run mechanism at 3 antenna solution. v5 version provide more reference data to let the mechanism make decision. Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
-
Ching-Te Ku authored
Compare to v1 and v2 removed some not usable parameters. Save firmware code size. The information can show how frequent and how long the Bluetooth scan do. It will help to debug coexistence issue. Signed-off-by:
-
Ching-Te Ku authored
Correct pointer assignment of v1 null data report. It doesn't really change logic at all, but it looks more readable. Signed-off-by:
-
Ching-Te Ku authored
The v2 firmware report reduce its maximum register numbers from 30 to 20, it can help to save firmware code size. Signed-off-by:
-
Ching-Te Ku authored
There is a new mechanism which can do some real time performance tuning for WiFi and BT. This TX/RX info is a condition provide to firmware to do traffic analysis. Signed-off-by:
-
Ching-Te Ku authored
Remove WiFi traffic busy level & traffic rate from active role information. This information will move to v5 version TDMA cycle info. Signed-off-by:
-
Ching-Te Ku authored
The error map and counter can help to analyze is coexistence mechanism going well or not. For example, if there is E2G (External control Wi-Fi slot for Wi-Fi 2.4 GHz) hang counter, it means Wi-Fi firmware didn't cut a slot for Wi-Fi 2.4 GHz. Maybe something wrong with firmware timer. Signed-off-by:
-
Jacob Keller authored
Replace the calculations for the payload length in qtnf_cmd_band_fill_iftype with struct_size() and size_sub(). While the payload length does not get directly passed to an allocation function, the performed calculation is still calculating the size of a flexible array structure (minus the size of a header structure). Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Cc: Igor Mitsyanko <imitsyanko@quantenna.com> Cc: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by:
-
Jacob Keller authored
The ipw_fw_error structure contains a payload[] flexible array as well as two pointers to this array area, ->elem, and ->log. The total size of the allocated structure is computed without use of the <linux/overflow.h> macros. There's no reason to keep both a payload[] and an extra pointer to both the elem and log members. Convert the elem pointer member into the flexible array member, removing payload. Fix the allocation of the ipw_fw_error structure to use size_add(), struct_size(), and array_size() to compute the allocation. This ensures that any overflow saturates at SIZE_MAX rather than overflowing and potentially allowing an undersized allocation. Before the structure change, the layout of ipw_fw_error was: struct ipw_fw_error { long unsigned int jiffies; /* 0 8 */ u32 status; /* 8 4 */ u32 config; /* 12 4 */ u32 elem_len; /* 16 4 */ u32 log_len; /* 20 4 */ struct ipw_error_elem * elem; /* 24 8 */ struct ipw_event * log; /* 32 8 */ u8 payload[]; /* 40 0 */ /* size: 40, cachelines: 1, members: 8 */ /* last cacheline: 40 bytes */ }; After this change, the layout is now: struct ipw_fw_error { long unsigned int jiffies; /* 0 8 */ u32 status; /* 8 4 */ u32 config; /* 12 4 */ u32 elem_len; /* 16 4 */ u32 log_len; /* 20 4 */ struct ipw_event * log; /* 24 8 */ struct ipw_error_elem elem[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 7 */ /* last cacheline: 32 bytes */ }; This saves a total of 8 bytes for every ipw_fw_error allocation, and removes the risk of a potential overflow on the allocation. Signed-off-by: -
Martin Kaiser authored
We can use the module_usb_driver macro instead of open-coding the driver's init and exit functions. This is simpler and saves some lines of code. Other realtek wireless drivers use module_usb_driver as well. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Reviewed-by:
-
Ping-Ke Shih authored
Originally, we keep RX standby timer to handle beamformee CSI, but this spends power and causes system not entering power save mode. To improve power consumption, release the timer if throughput becomes low. Signed-off-by:
-
Martin Kaiser authored
The Edimax V2 (vid 0x7392, pid 0xb811) works well with the rtl8xxxu driver since rtl8188eu support has been added. Remove the untested flag for this device. Signed-off-by:
-
Hans de Goede authored
Many devices ship with a nvram ccode value of X2/XT/XU/XV/ALL which are all special world-wide compatibility ccode-s. Most of these world-wide ccode-s allow passive scan mode only for 2.4GHz channels 12-14, only enabling them when an AP is seen on them. Since linux-firmware has moved to the new cyfmac4356-pci.bin + cyfmac4356-pci.clm_blob firmware files this no longer works and 4356 devices using e.g. an X2 ccode fail to connect to an AP on channel 13. Add the 4356 chip-id to the list of chips for which to use the ISO3166 country code + rev 0 as fallback in brcmf_translate_country_code() to fix this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Kalle Valo authored
To clean up drivers/net/wireless move the old drivers drivers left in the directory to a new "legacy" directory. I did consider adding CONFIG_WLAN_VENDOR_LEGACY like other vendors have but then dropped the idea as these are really old drivers and hopefully we get to remove them soon. There should be no changes in compilation or in Kconfig options, merely moving files. Signed-off-by:
-
Kalle Valo authored
To clean up drivers/net/wireless move the virtual drivers to a new virtual directory. I did consider adding CONFIG_WLAN_VENDOR_VIRTUAL like other vendors have but then dropped the idea as we are not real drivers. There should be no changes in compilation or in Kconfig options, merely moving files. The order in menuconfig is slightly changed, the virtual drivers are now last in the list. Signed-off-by:
-
Aditya Kumar Singh authored
Add some more debug prints in processing regulatory WMI event in order to increase more debuggability. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aditya Kumar Singh authored
In order to support different power levels of 6 GHz AP and client, new WMI event for regulatory - WMI_REG_CHAN_LIST_CC_EXT_EVENTID is added in firmware. This event provides new parameters required for 6 GHz regulatory rules. Add support for parsing 2.4 GHz, 5 GHz and 6 GHz reg rules and other parameters from WMI_REG_CHAN_LIST_CC_EXT_EVENTID. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Lavanya Suresh <quic_lavaks@quicinc.com> Signed-off-by:
Wen Gong <quic_wgong@quicinc.com> Signed-off-by:
-
Aditya Kumar Singh authored
Currently, during regulatory event, 2 GHz/5 GHz is referred to as 2G/5G including variable names. However, there is no such entity as 2G or 5G. Re-name such occurences to its proper name. No functional changes. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
- 11 Mar, 2023 13 commits
-
-
Muhammad Usama Anjum authored
make versioncheck reports the following: ./drivers/net/ethernet/qlogic/qede/qede.h: 10 linux/version.h not needed. ./drivers/net/ethernet/qlogic/qede/qede_ethtool.c: 7 linux/version.h not needed. So remove linux/version.h from both of these files. Also remove linux/compiler.h while at it as it is also not being used. Signed-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
Edward Cree authored
EF100 can pop and/or push up to two VLAN tags. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
-
Jakub Kicinski authored
Siddharth Vadapalli says: ==================== Update CPSW bindings for Serdes PHY This series adds documentation for the Serdes PHY. Also, the name used to refer to the Serdes PHY in the am65-cpsw driver is updated to match the documented name. Documenting the Serdes PHY bindings was missed out in the already merged series at: https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.com/ This miss was pointed out at: https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@mail.gmail.com/ v2: https://lore.kernel.org/r/20230308051835.276552-1-s-vadapalli@ti.com/ v1: https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@ti.com/ ==================== Link: https://lore.kernel.org/r/20230309073612.431287-1-s-vadapalli@ti.comSigned-off-by:
-
Siddharth Vadapalli authored
The bindings for the am65-cpsw driver use the name "serdes" to refer to the Serdes PHY. Thus, update the name used for the Serdes PHY within the am65_cpsw_init_serdes_phy() function from "serdes-phy" to "serdes". Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by:
-
Siddharth Vadapalli authored
Update bindings to include Serdes PHY as an optional PHY, in addition to the existing CPSW MAC's PHY. The CPSW MAC's PHY is required while the Serdes PHY is optional. The Serdes PHY handle has to be provided only when the Serdes is being configured in a Single-Link protocol. Using the name "serdes-phy" to represent the Serdes PHY handle, the am65-cpsw-nuss driver can obtain the Serdes PHY and request the Serdes to be configured. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Vadim Fedorenko authored
Flashing firmware via devlink flash was failing on PTP OCP devices because it is using Quad SPI mode, but the driver was not properly behaving. With force_irq flag landed it now can be fixed. Signed-off-by:
Vadim Fedorenko <vadfed@meta.com> Link: https://lore.kernel.org/r/20230309105421.2953451-1-vadfed@meta.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== wireless-next patches for 6.4 Major changes: cfg80211 * 6 GHz improvements * HW timestamping support * support for randomized auth/deauth TA for PASN privacy (also for mac80211) mac80211 * radiotap TLV and EHT support for the iwlwifi sniffer * HW timestamping support * per-link debugfs for multi-link brcmfmac * support for Apple (M1 Pro/Max) devices iwlwifi * support for a few new devices * EHT sniffer support rtw88 * better support for some SDIO devices (e.g. MAC address from efuse) rtw89 * HW scan support for 8852b * better support for 6 GHz scanning * tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (84 commits) wifi: iwlwifi: mvm: fix EOF bit reporting wifi: iwlwifi: Do not include radiotap EHT user info if not needed wifi: iwlwifi: mvm: add EHT RU allocation to radiotap wifi: iwlwifi: Update logs for yoyo reset sw changes wifi: iwlwifi: mvm: clean up duplicated defines wifi: iwlwifi: rs-fw: break out for unsupported bandwidth wifi: iwlwifi: Add support for B step of BnJ-Fm4 wifi: iwlwifi: mvm: make flush code a bit clearer wifi: iwlwifi: mvm: avoid UB shift of snif_queue wifi: iwlwifi: mvm: add primary 80 known for EHT radiotap wifi: iwlwifi: mvm: parse FW frame metadata for EHT sniffer mode wifi: iwlwifi: mvm: decode USIG_B1_B7 RU to nl80211 RU width wifi: iwlwifi: mvm: rename define to generic name wifi: iwlwifi: mvm: allow Microsoft to use TAS wifi: iwlwifi: mvm: add all EHT based on data0 info from HW wifi: iwlwifi: mvm: add EHT radiotap info based on rate_n_flags wifi: iwlwifi: mvm: add an helper function radiotap TLVs wifi: radiotap: separate vendor TLV into header/content wifi: iwlwifi: reduce verbosity of some logging events wifi: iwlwifi: Adding the code to get RF name for MsP device ... ==================== Link: https://lore.kernel.org/r/20230310120159.36518-1-johannes@sipsolutions.netSigned-off-by:
-
Jakub Kicinski authored
Russell King says: ==================== Rework SFP A2 access conditionals This series reworks the SFP A2 (diagnostics and control) access so we don't end up testing a variable number of conditions in several places. This also resolves a minor issue where we may have a module indicating that it is not SFF8472 compliant, doesn't implement A2, but fails to set the enhanced option byte to zero, leading to accesses to the A2 page that fail. The first patch adds a new flag "have_a2" which indicates whether we should be accessing the A2 page, and uses this for hwmon. The conditions are kept the same. The second patch extends the check for soft-state polling and control by using this "have_a2" flag (which effectively augments the check to include some level of SFF8472 compliance.) ==================== Link: https://lore.kernel.org/r/ZAoBnqGBnIZzLwpV@shell.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
The soft state bits are stored in the A2h memory space, and require SFF-8472 compliance. This is what our have_a2 flag tells us, so use this to indicate whether we should attempt to use the soft signals. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Russell King (Oracle) authored
The hwmon code wants to know when it is safe to access the A2h data stored in a separate address. We indicate that this is present when we have SFF-8472 compliance and the lack of an address-change sequence., The same conditions are also true if we want to access other controls and status in the A2h address. So let's make a flag to indicate whether we can access it, instead of repeating the conditions throughout the code. For now, only convert the hwmon code. Signed-off-by:
-
Jakub Kicinski authored
Gal Pressman says: ==================== Couple of minor improvements to build_skb variants First patch replaces open-coded occurrences of skb_propagate_pfmemalloc() in build_skb() and build_skb_around(). The secnod patch adds a likely() to the skb allocation in build_skb(). ==================== Link: https://lore.kernel.org/r/20230308131720.2103611-1-gal@nvidia.comSigned-off-by:
-
Gal Pressman authored
Similarly to napi_build_skb(), it is likely the skb allocation in build_skb() succeeded. frag_size != 0 is also likely, as stated in __build_skb_around(). Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by:
-
Gal Pressman authored
Use skb_propagate_pfmemalloc() in build_skb()/build_skb_around() instead of open-coding it. Reviewed-by:
-
