- 28 Aug, 2020 36 commits
-
-
Xia Jiang authored
The function of mtk_jpeg_adjust_fmt_mplane() equals mtk_jpeg_g_fmt_vid_mplane(), so use mtk_jpeg_g_fmt_vid_mplane() to replace it . Delete the unused ctx parameter. Using fourcc to distinguish between different formats is more generic, because that jpeg enc will also use it. Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
Xia Jiang <xia.jiang@mediatek.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Xia Jiang authored
The maximum width and height supported by JPEG dec is 65535, so change them from 8192 to 65535. Reviewed-by:
-
Xia Jiang authored
JPEG dec does't support setting a compose rectangle, so remove mtk_jpeg_dec_s_selection(). Reviewed-by:
-
Xia Jiang authored
Delete unused member variables annotation. Delete unused variable definition. Delete redundant log print, because V4L2 debug logs already print it. Add annotation for enum mtk_jpeg_ctx_state. Reviewed-by:
-
Xia Jiang authored
Move MTK_JPEG_COMP_MAX definition to mtk_jpeg_core.h file, because it is used by mtk_jpeg_core.c file. Reviewed-by:
-
Xia Jiang authored
Use clamp() to replace mtk_jpeg_bound_align_image() and round() to replace mtk_jpeg_align(). Reviewed-by:
-
Xia Jiang authored
Change register offset hex numerals from uppercase to lowercase. Change data type of max/min width/height from integer to unsigned integer. Reviewed-by:
-
Xia Jiang authored
Delete zeroing the reserved fields because that the core already does it. Reviewed-by:
-
Xia Jiang authored
There is no need to queue an empty buffer for signaling a last frame, because all frames are separate from each other in JPEG. Reviewed-by:
-
Xia Jiang authored
There is a delayed work scheduled before starting the hardware and canceled in the interrupt handler. If the delayed work is executed, it resets the hardware and reports the failure to V4L2, so that the execution can continue from next frames. Reviewed-by:
-
Xia Jiang authored
Add v4l2_m2m_suspend() function call in mtk_jpeg_suspend() to make sure that the current frame is processed completely before suspend. Add v4l2_m2m_resume() function call in mtk_jpeg_resume() to unblock the driver from scheduling next frame. Reviewed-by:
-
Pi-Hsun Shih authored
Add two functions that can be used to stop new jobs from being queued / continue running queued job. This can be used while a driver using m2m helper is going to suspend / wake up from resume, and can ensure that there's no job running in suspend process. Signed-off-by:
Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by:
Jerry-ch Chen <jerry-ch.chen@mediatek.corp-partner.google.com> Reviewed-by:
-
Xia Jiang authored
Delete the resetting hardware flow in suspend and resume function because that resetting operation will be done in device_run(). Reviewed-by:
-
Xia Jiang authored
Call pm_runtime_get_sync() before starting a frame and then pm_runtime_put() after completing it. This can save power for the time between processing two frames. Reviewed-by:
-
Xia Jiang authored
The driver can be instantiated multiple times, e.g. for a decoder and an encoder. Moreover, other drivers could coexist on the same system. This makes the static video node number assignment pointless, so switch to automatic assignment instead. Reviewed-by:
-
Xia Jiang authored
Delete platform_get_resource operation for irq. Return actual value rather than EINVAL when fail to get and request irq. Reviewed-by:
-
Xia Jiang authored
Add checking created buffer size follow in mtk_jpeg_queue_setup(). Reviewed-by:
-
Xia Jiang authored
Let v4l2_ctrl_subscribe_event() do the job for other types except V4L2_EVENT_SOURCE_CHANGE. Reviewed-by:
-
Sowjanya Komatineni authored
Settle time determines the number of cil clock cyles to wait after LP00 when moving from LP to HS. This patch computes T-CLK-SETTLE and T-HS-SETTLE times based on cil clock rate and pixel rate from the sensor and programs them during streaming. T-CLK-SETTLE time is the interval during which receiver will ignore any HS transitions on clock lane starting from the beginning of T-CLK-PREPARE. T-HS-SETTLE time is the interval during which recevier will ignore any HS transitions on data lane starting from the beginning of T-HS-PREPARE. Signed-off-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by:
-
Sowjanya Komatineni authored
CSI MIPI pads need to be enabled and calibrated for capturing from the external sensor or transmitter. MIPI CAL unit calibrates MIPI pads pull-up, pull-down and termination impedances. Calibration is done by co-work of MIPI BIAS pad and MIPI CAL control unit. Triggering calibration start can happen any time after MIPI pads are enabled but calibration results will be latched and applied to MIPI pads by MIPI CAL unit only when the link is in LP11 state and then calibration status register gets updated. This patch enables CSI MIPI pads and calibrates them during streaming. Tegra CSI receiver is able to catch the very first clock transition. So, CSI receiver is always enabled prior to sensor streaming and trigger of calibration start is done during CSI subdev streaming and status of calibration is verified after sensor stream on. Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Sowjanya Komatineni authored
With the split of MIPI calibration into tegra_mipi_calibrate() and tegra_mipi_wait(), MIPI clock is not kept enabled and mutex is not locked till the calibration is done. So, this patch keeps MIPI clock enabled and mutex locked after triggering start of calibration till its done. To let calibration process go through its finite sequence codes before calibration logic waiting for pads idle state added wait time of 75usec to make sure it sees idle state to apply the results. This patch renames tegra_mipi_calibrate() as tegra_mipi_start_calibration() and tegra_mipi_wait() as tegra_mipi_finish_calibration() to be inline with their usage. Reviewed-by:
-
Sowjanya Komatineni authored
This patch adds selection v4l2 ioctl operations to allow configuring a selection rectangle in the sensor through the Tegra video device node. Some sensor drivers supporting crop uses try_crop rectangle from v4l2_subdev_pad_config during try format for computing binning. So with selection ops support, this patch also updates try format to use try crop rectangle either from subdev frame size enumeration or from subdev crop boundary. Signed-off-by:
-
Sowjanya Komatineni authored
This patch adds support to capture from the external sensor based on device graph in the device tree. Driver walks through the device graph to create media links between the entities and registers and unregisters video devices when the corresponding sub-devices are bound and unbound. Channel formats are enumerated based on available formats from the sensor and the corresponding matched formats from the Tegra supported video formats list. Each Tegra CSI instance can be configured as 4-lane or 2-lane based on supported lane configuration from the sensor through the device tree. Currently this driver supports V4L2 video node centric only. [hverkuil: changed video_unregister_device to vb2_video_unregister_device] Signed-off-by:
-
Sowjanya Komatineni authored
This patch separates implementation of CSI stream enable and disable into separate functions for readability. Reviewed-by:
-
Sowjanya Komatineni authored
Update VI and CSI bindings to add port and endpoint nodes as per media video-interfaces DT binding document. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sowjanya Komatineni authored
Tegra VI supported video formats are more for non TPG and there can be multiple pixel formats for the same media bus format. This patch updates the helper function for format lookup based on mbus code from pre-defined Tegra supported format list to look from the specified list index offset. Offset based look up is used with sensor device graph (non TPG) where format enumeration can list all supported formats for the specific sensor mbus codes. Signed-off-by:
-
Sowjanya Komatineni authored
Tegra internal TPG mode is only for Tegra vi and csi testing without a real sensor and driver should default support real sensor. So, This patch adds CONFIG_VIDEO_TEGRA_TPG and enables Tegra internal TPG mode only when this config is selected. Signed-off-by:
-
Sowjanya Komatineni authored
Pixel format width is mistakenly aligned to surface align bytes and altering width to aligned value may force sensor mode change other than the requested one and also cause mismatch in width programmed between sensor and vi which can lead to capture errors. This patch removes width alignment and clamps width as per Tegra minimum and maximum limits. Signed-off-by:
-
Hans Verkuil authored
This is only needed for drivers that do not use vb2_fop_release(). Note that vb2_queue_release() is *not* the counterpart of vb2_queue_init() as some drivers here seem to think. Also use vb2_video_unregister_device() to automatically stop streaming at unregister time for those drivers that set vdev->queue. Signed-off-by:
-
Hans Verkuil authored
Use vb2_video_unregister_device() to automatically stop streaming at unregister time. This avoids the use of vb2_queue_release() which should not be called by drivers that set vdev->queue. Signed-off-by:
-
Hans Verkuil authored
Use vb2_video_unregister_device() to automatically stop streaming at unregister time. This avoids the use of vb2_queue_release() which should not be called by drivers that set vdev->queue. Signed-off-by:
-
Hans Verkuil authored
This is only needed for drivers that do not use vb2_fop_release(). Note that vb2_queue_release() is *not* the counterpart of vb2_queue_init() as some drivers here seem to think. Also use vb2_video_unregister_device() to automatically stop streaming at unregister time for those drivers that set vdev->queue. Note that sun4i-csi didn't unregister the video device at all. That's now fixed. Signed-off-by:
-
Hans Verkuil authored
Use vb2_video_unregister_device() to automatically stop streaming at unregister time. This avoids the use of vb2_queue_release() which should not be called by drivers that set vdev->queue. Signed-off-by:
-
Hans Verkuil authored
Use vb2_video_unregister_device() to automatically stop streaming at unregister time. This avoids the use of vb2_queue_release() which should not be called by drivers that set vdev->queue. Signed-off-by:
Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by:
-
Hans Verkuil authored
If a driver calls (_)vb2_fop_release(), then such a driver should also call vb2_video_unregister_device() instead of video_unregister_device(). This helper will call vb2_queue_release() if a filehandle is marked as owner of the queue. This ensures that at unregister time any streaming is cancelled and all buffers are returned to userspace. This is very useful for complex drivers since this stops all streaming in all subdevs in the pipeline controlled by this video device. Otherwise this would be delayed until the owner filehandle is closed, which can be quite some time later. Bonus points for ordering the includes :-) Signed-off-by:
-
Kieran Bingham authored
The files maintained as part of the RDACM20 were incorrectly sorted while they were added. Correct the sort-order. Fixes: 34009bff ("media: i2c: Add RDACM20 driver") Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
- 26 Aug, 2020 4 commits
-
-
Helen Koike authored
Add Dafna Hirschfeld to rkisp1 maintainers list Signed-off-by:
Helen Koike <helen.koike@collabora.com> Acked-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by:
-
Christopher Snowhill authored
This small change adds the device identifier for the MyGica iGrabber, which features an Empia EM2860, a Philips SAA7113, Empia EMP202, and no tuner. Verified that both the composite and S-Video inputs work with NTSC source. It does not appear to need any port twiddling on pre-init. Signed-off-by:
Christopher Snowhill <chris@kode54.net> Signed-off-by:
-
Tom Rix authored
clang static analysis reports this problem tuner-simple.c:714:13: warning: Assigned value is garbage or undefined buffer[1] = buffer[3]; ^ ~~~~~~~~~ In simple_set_radio_freq buffer[3] used to be done in-function with a switch of tuner type, now done by a call to simple_radio_bandswitch which has this case case TUNER_TENA_9533_DI: case TUNER_YMEC_TVF_5533MF: tuner_dbg("This tuner doesn't ... return 0; which does not set buffer[3]. In the old logic, this case would have returned 0 from simple_set_radio_freq. Recover this old behavior by returning an error for this codition. Since the old simple_set_radio_freq behavior returned a 0, do the same. Fixes: c7a9f3aa ("V4L/DVB (7129): tuner-simple: move device-specific code into three separate functions") Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Peilin Ye authored
Setting `hue` by calling tpg_s_hue() directly is risky, since it does not perform range check. Clamp `hue` to the valid range in tpg_s_hue(). Suggested-by:
Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by:
-
