- 18 Apr, 2016 40 commits
-
-
Takashi Iwai authored
[ Upstream commit 56dc66ff ] Just like CX20722, CX7024 codec also requires the power down at reboot in order to reduce the noise at reboot/shutdown. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=113511 Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Douglas Gilbert authored
[ Upstream commit 5ecee0a3 ] One of the strange things that the original sg driver did was let the user provide both a data-out buffer (it followed the sg_header+cdb) _and_ specify a reply length greater than zero. What happened was that the user data-out buffer was copied into some kernel buffers and then the mid level was told a read type operation would take place with the data from the device overwriting the same kernel buffers. The user would then read those kernel buffers back into the user space. From what I can tell, the above action was broken by commit fad7f01e ("sg: set dxferp to NULL for READ with the older SG interface") in 2008 and syzkaller found that out recently. Make sure that a user space pointer is passed through when data follows the sg_header structure and command. Fix the abnormal case when a non-zero reply_len is also given. Fixes: fad7f01e Cc: <stable@vger.kernel.org> #v2.6.28+ Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
Ewan Milne <emilne@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Mario Kleiner authored
[ Upstream commit 459ee1c3 ] As observed on Apple iMac10,1, DCE-3.2, RV-730, link rate of 2.7 Ghz is not selected, because the args.v1.ucConfig flag setting for 2.7 Ghz gets overwritten by a following assignment of the transmitter to use. Move link rate setup a few lines down to fix this. In practice this didn't have any positive or negative effect on display setup on the tested iMac10,1 so i don't know if backporting to stable makes sense or not. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
[ Upstream commit e64c952e ] Some PX laptops don't provide an ACPI method to control dGPU power. On those systems, the driver is responsible for handling the dGPU power state. Disable runtime PM on them until support for this is implemented. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 550da24f ] break_stripe_batch_list breaks up a batch and copies some flags from the batch head to the members, preserving others. It doesn't preserve or copy STRIPE_PREREAD_ACTIVE. This is not normally a problem as STRIPE_PREREAD_ACTIVE is cleared when a stripe_head is added to a batch, and is not set on stripe_heads already in a batch. However there is no locking to ensure one thread doesn't set the flag after it has just been cleared in another. This does occasionally happen. md/raid5 maintains a count of the number of stripe_heads with STRIPE_PREREAD_ACTIVE set: conf->preread_active_stripes. When break_stripe_batch_list clears STRIPE_PREREAD_ACTIVE inadvertently this could becomes incorrect and will never again return to zero. md/raid5 delays the handling of some stripe_heads until preread_active_stripes becomes zero. So when the above mention race happens, those stripe_heads become blocked and never progress, resulting is write to the array handing. So: change break_stripe_batch_list to preserve STRIPE_PREREAD_ACTIVE in the members of a batch. URL: https://bugzilla.kernel.org/show_bug.cgi?id=108741 URL: https://bugzilla.redhat.com/show_bug.cgi?id=1258153 URL: http://thread.gmane.org/5649C0E9.2030204@zoner.cz Reported-by: Martin Svec <martin.svec@zoner.cz> (and others) Tested-by:
Tom Weber <linux@junkyard.4t2.com> Fixes: 1b956f7a ("md/raid5: be more selective about distributing flags across batch.") Cc: stable@vger.kernel.org (v4.1 and later) Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Maurizio Lombardi authored
[ Upstream commit 84bd6499 ] In beiscsi_setup_boot_info(), the boot_kset pointer should be set to NULL in case of failure otherwise an invalid pointer dereference may occur later. Cc: <stable@vger.kernel.org> Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit b8941571 ] The Home Agent and PCU PCI devices in Broadwell-EP have a non-BAR register where a BAR should be. We don't know what the side effects of sizing the "BAR" would be, and we don't know what address space the "BAR" might appear to describe. Mark these devices as having non-compliant BARs so the PCI core doesn't touch them. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Tested-by:
Andi Kleen <ak@linux.intel.com> CC: stable@vger.kernel.org Signed-off-by:
-
Eric Wheeler authored
[ Upstream commit f8b11260 ] When bch_cache_set_alloc() fails to kzalloc the cache_set, the asyncronous closure handling tries to dereference a cache_set that hadn't yet been allocated inside of cache_set_flush() which is called by __cache_set_unregister() during cleanup. This appears to happen only during an OOM condition on bcache_register. Signed-off-by:
Eric Wheeler <bcache@linux.ewheeler.net> Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Wheeler authored
[ Upstream commit 9b299728 ] Fix null pointer dereference by changing register_cache() to return an int instead of being void. This allows it to return -ENOMEM or -ENODEV and enables upper layers to handle the OOM case without NULL pointer issues. See this thread: http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3521 Fixes this error: gargamel:/sys/block/md5/bcache# echo /dev/sdh2 > /sys/fs/bcache/register bcache: register_cache() error opening sdh2: cannot allocate memory BUG: unable to handle kernel NULL pointer dereference at 00000000000009b8 IP: [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache] PGD 120dff067 PUD 1119a3067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: veth ip6table_filter ip6_tables (...) CPU: 4 PID: 3371 Comm: kworker/4:3 Not tainted 4.4.2-amd64-i915-volpreempt-20160213bc1 #3 Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013 Workqueue: events cache_set_flush [bcache] task: ffff88020d5dc280 ti: ffff88020b6f8000 task.ti: ffff88020b6f8000 RIP: 0010:[<ffffffffc05a7e8d>] [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache] Signed-off-by:
Marc MERLIN <marc@merlins.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Eric Wheeler authored
[ Upstream commit 07cc6ef8 ] The bch_writeback_thread might BUG_ON in read_dirty() if dc->sb==BDEV_STATE_DIRTY and bch_sectors_dirty_init has not yet completed its related initialization. This patch downs the dc->writeback_lock until after initialization is complete, thus preventing bch_writeback_thread from proceeding prematurely. See this thread: http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3453Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Chris Friesen authored
[ Upstream commit f9c904b7 ] The callers of steal_account_process_tick() expect it to return whether a jiffy should be considered stolen or not. Currently the return value of steal_account_process_tick() is in units of cputime, which vary between either jiffies or nsecs depending on CONFIG_VIRT_CPU_ACCOUNTING_GEN. If cputime has nsecs granularity and there is a tiny amount of stolen time (a few nsecs, say) then we will consider the entire tick stolen and will not account the tick on user/system/idle, causing /proc/stats to show invalid data. The fix is to change steal_account_process_tick() to accumulate the stolen time and only account it once it's worth a jiffy. (Thanks to Frederic Weisbecker for suggestions to fix a bug in my first version of the patch.) Signed-off-by:
Chris Friesen <chris.friesen@windriver.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/56DBBDB8.40305@mail.usask.caSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Stephane Eranian authored
[ Upstream commit 5690ae28 ] This patch adds a definition for GLOBAL_OVFL_STATUS bit 55 which is used with the Processor Trace (PT) feature. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Andi Kleen authored
[ Upstream commit b83ff1c8 ] Add new MSRs (LBR_INFO) and some new MSR bits used by the Intel Skylake PMU driver. Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit fbce23a0 ] This patch changes the return type of snd_hdac_power_up/down() and variants to pass the error code from the underlying pm_runtime_get/put() calls. Currently they are ignored, but in most places, these should be handled properly. As an example, the regmap handler is updated to check the return value and accesses the register only when the wakeup succeeds. Signed-off-by:
-
Phil Elwell authored
[ Upstream commit 2c7e3306 ] The DT bindings for pinctrl-bcm2835 allow both the function and pull to contain either one entry or one per pin. However, an error in the DT parsing can cause failures if the number of pulls differs from the number of functions. Cc: stable@vger.kernel.org Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Reviewed-by:
Stephen Warren <swarren@wwwdotorg.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Radim Krčmář authored
[ Upstream commit 7dd0fdff ] Discard policy uses ack_notifiers to prevent injection of PIT interrupts before EOI from the last one. This patch changes the policy to always try to deliver the interrupt, which makes a difference when its vector is in ISR. Old implementation would drop the interrupt, but proposed one injects to IRR, like real hardware would. The old policy breaks legacy NMI watchdogs, where PIT is used through virtual wire (LVT0): PIT never sends an interrupt before receiving EOI, thus a guest deadlock with disabled interrupts will stop NMIs. Note that NMI doesn't do EOI, so PIT also had to send a normal interrupt through IOAPIC. (KVM's PIT is deeply rotten and luckily not used much in modern systems.) Even though there is a chance of regressions, I think we can fix the LVT0 NMI bug without introducing a new tick policy. Cc: <stable@vger.kernel.org> Reported-by:
Yuki Shibuya <shibuya.yk@ncos.nec.co.jp> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 0d5ce778 ] A typo of j for i led to a logic bug. To rule out future confusion, the variable names are made meaningful. Signed-off-by:
Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Vinayak Menon authored
[ Upstream commit e53b50c0 ] early_init_dt_alloc_reserved_memory_arch passes end as 0 to __memblock_alloc_base, when limits are not specified. But __memblock_alloc_base takes end value of 0 as MEMBLOCK_ALLOC_ACCESSIBLE and limits the end to memblock.current_limit. This results in regions never being placed in HIGHMEM area, for e.g. CMA. Let __memblock_alloc_base allocate from anywhere in memory if limits are not specified. Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Vinayak Menon <vinmenon@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Asai Thambi SP authored
[ Upstream commit aae4a033 ] Allow device initialization to finish gracefully when it is in FTL rebuild failure state. Also, recover device out of this state after successfully secure erasing it. Signed-off-by:
Selvan Mani <smani@micron.com> Signed-off-by:
Vignesh Gunasekaran <vgunasekaran@micron.com> Signed-off-by:
Asai Thambi S P <asamymuthupa@micron.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Asai Thambi SP authored
[ Upstream commit ee04bed6 ] Fix incorrectly setting MTIP_DDF_SEC_LOCK_BIT Signed-off-by:
-
Asai Thambi SP authored
[ Upstream commit 51c6570e ] Flush inflight IOs using fsync_bdev() when the device is safely removed. Also, block further IOs in device open function. Signed-off-by:
Rajesh Kumar Sambandam <rsambandam@micron.com> Signed-off-by:
-
Asai Thambi SP authored
[ Upstream commit 2132a544 ] pci and block layers have changed a lot compared to when SRSI support was added. Given the current state of pci and block layers, this driver do not have to do any specific handling. Signed-off-by:
-
Asai Thambi SP authored
[ Upstream commit 02b48265 ] put_disk() need to be called after del_gendisk() to free the disk object structure. Signed-off-by:
-
Asai Thambi SP authored
[ Upstream commit d8a18d2d ] Prevent standby immediate command from being issued in remove, suspend and shutdown paths, while drive is in FTL rebuild process. Signed-off-by:
-
Asai Thambi SP authored
[ Upstream commit 5b7e0a8a ] Print exact time when an internal command is interrupted. Signed-off-by:
-
Nikolay Borisov authored
[ Upstream commit ab73ef46 ] When dqget() in __dquot_initialize() fails e.g. due to IO error, __dquot_initialize() will pass an array of uninitialized pointers to dqput_all() and thus can lead to deference of random data. Fix the problem by properly initializing the array. CC: stable@vger.kernel.org Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Mateusz Guzik authored
[ Upstream commit 2e83b79b ] This plugs 2 trivial leaks in xfs_attr_shortform_list and xfs_attr3_leaf_list_int. Signed-off-by:
Mateusz Guzik <mguzik@redhat.com> Cc: <stable@vger.kernel.org> Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
J. Bruce Fields authored
[ Upstream commit 4aed9c46 ] A number of spots in the xdr decoding follow a pattern like n = be32_to_cpup(p++); READ_BUF(n + 4); where n is a u32. The only bounds checking is done in READ_BUF itself, but since it's checking (n + 4), it won't catch cases where n is very large, (u32)(-4) or higher. I'm not sure exactly what the consequences are, but we've seen crashes soon after. Instead, just break these up into two READ_BUF()s. Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit 10e7ac22 ] Calling return copy_to_user(...) in an ioctl will not do the right thing if there's a pagefault: copy_to_user returns the number of bytes not copied in this case. Fix up watchdog/rc32434_wdt to do return copy_to_user(...)) ? -EFAULT : 0; instead. Cc: stable@vger.kernel.org Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 5c915c68 ] On my bttv card "Hauppauge WinTV [card=10]" capturing in YV12 fmt at max size results in a solid green rectangle being captured (all colors 0 in YUV). This turns out to be caused by max-width (924) not being a multiple of 16. We've likely never hit this problem before since normally xawtv / tvtime, etc. will prefer packed pixel formats. But when using a video card which is using xf86-video-modesetting + glamor, only planar XVideo fmts are available, and xawtv will chose a matching capture format to avoid needing to do conversion, triggering the solid green window problem. Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 51093254 ] Let the target core check task existence instead of the SRP target driver. Additionally, let the target core check the validity of the task management request instead of the ib_srpt driver. This patch fixes the following kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<ffffffffa0565f37>] srpt_handle_new_iu+0x6d7/0x790 [ib_srpt] Oops: 0002 [#1] SMP Call Trace: [<ffffffffa05660ce>] srpt_process_completion+0xde/0x570 [ib_srpt] [<ffffffffa056669f>] srpt_compl_thread+0x13f/0x160 [ib_srpt] [<ffffffff8109726f>] kthread+0xcf/0xe0 [<ffffffff81613cfc>] ret_from_fork+0x7c/0xb0 Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Fixes: 3e4f5748 ("ib_srpt: Convert TMR path to target_submit_tmr") Tested-by:
Alex Estrin <alex.estrin@intel.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
David Howells authored
[ Upstream commit ac4cbedf ] There are still a couple of minor issues in the X.509 leap year handling: (1) To avoid doing a modulus-by-400 in addition to a modulus-by-100 when determining whether the year is a leap year or not, I divided the year by 100 after doing the modulus-by-100, thereby letting the compiler do one instruction for both, and then did a modulus-by-4. Unfortunately, I then passed the now-modified year value to mktime64() to construct a time value. Since this isn't a fast path and since mktime64() does a bunch of divisions, just condense down to "% 400". It's also easier to read. (2) The default month length for any February where the year doesn't divide by four exactly is obtained from the month_length[] array where the value is 29, not 28. This is fixed by altering the table. Reported-by:
Rudolf Polzer <rpolzer@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
David Woodhouse <David.Woodhouse@intel.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> cc: stable@vger.kernel.org Signed-off-by:
-
David Howells authored
[ Upstream commit fd19a3d1 ] Make the X.509 ASN.1 time object decoder fill in a time64_t rather than a struct tm to make comparison easier (unfortunately, this makes readable display less easy) and export it so that it can be used by the PKCS#7 code too. Further, tighten up its parsing to reject invalid dates (eg. weird characters, non-existent hour numbers) and unsupported dates (eg. timezones other than 'Z' or dates earlier than 1970). Signed-off-by:
-
David Howells authored
[ Upstream commit b92e6570 ] Extract both parts of the AuthorityKeyIdentifier, not just the keyIdentifier, as the second part can be used to match X.509 certificates by issuer and serialNumber. Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Russell King authored
[ Upstream commit 7f05538a ] The calculation for the timeout based on the number of card clocks is incorrect. The calculation assumed: timeout in microseconds = clock cycles / clock in Hz which is clearly a several orders of magnitude wrong. Fix this by multiplying the clock cycles by 1000000 prior to dividing by the Hz based clock. Also, as per part 1, ensure that the division rounds up. As this needs 64-bit math via do_div(), avoid it if the clock cycles is zero. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v3.15+ Tested-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Russell King authored
[ Upstream commit fafcfda9 ] The data timeout gives the minimum amount of time that should be waited before timing out if no data is received from the card. Simply dividing the nanosecond part by 1000 does not give this required guarantee, since such a division rounds down. Use DIV_ROUND_UP() to give the desired timeout. Signed-off-by:
-
Russell King authored
[ Upstream commit 0ca33b4a ] Commit 1140011e ("mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes") broke any chance of the SDR50 or DDR50 modes being used. The commit claims that SDR50 and DDR50 require clock adjustments in the SDIO3 Configuration register, which is located via the "conf-sdio3" resource. However, when this resource is given, we fail to read the host capabilities 1 register, resulting in host->caps1 being zero. Hence, both SDHCI_SUPPORT_SDR50 and SDHCI_SUPPORT_DDR50 bits remain zero, disabling the SDR50 and DDR50 modes. The underlying idea in this function appears to be to read the device capabilities, modify them, and set SDHCI_QUIRK_MISSING_CAPS to cause our modified capabilities to be used. Implement exactly that. Fixes: 1140011e ("mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes") Signed-off-by:
-
Dmitry Tunin authored
[ Upstream commit 81d90442 ] T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3014 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1546694Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Tom Lendacky authored
[ Upstream commit ce0ae266 ] Since a crypto_ahash_import() can be called against a request context that has not had a crypto_ahash_init() performed, the request context needs to be cleared to insure there is no random data present. If not, the random data can result in a kernel oops during crypto_ahash_update(). Cc: <stable@vger.kernel.org> # 3.14.x- Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Shaohua Li authored
[ Upstream commit 27a353c0 ] check_reshape() is called from raid5d thread. raid5d thread shouldn't call mddev_suspend(), because mddev_suspend() waits for all IO finish but IO is handled in raid5d thread, we could easily deadlock here. This issue is introduced by 738a2738 ("md/raid5: fix allocation of 'scribble' array.") Cc: stable@vger.kernel.org (v4.1+) Reported-and-tested-by:
Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by:
-
