r is "u32" always >= 0,mipi_dsi_create_packet may return little than zero.
so r < 0 condition is never accessible.

Fixes coccicheck warnings:
./drivers/gpu/drm/omapdrm/dss/dsi.c:2155:5-6:
WARNING: Unsigned expression compared with zero: r < 0
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210312071445.1721-1-angkery@163.com

We seem to have some more driver bugs than thought.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: deb0814b ("drm/ttm: add ttm_bo_pin()/ttm_bo_unpin() v2")
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210312093810.2202-1-christian.koenig@amd.com

Some of them have gaps, or fields we don't clear. Native ioctl code
does full copies plus zero-extends on size mismatch, so nothing can
leak. But compat is more hand-rolled so need to be careful.

None of these matter for performance, so just memset.

Also I didn't fix up the CONFIG_DRM_LEGACY or CONFIG_DRM_AGP ioctl, those
are security holes anyway.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reported-by: syzbot+620cf21140fc7e772a5d@syzkaller.appspotmail.com # vblank ioctl
Cc: syzbot+620cf21140fc7e772a5d@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222100643.400935-1-daniel.vetter@ffwll.ch
(cherry picked from commit e926c474)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

dma-buf importing was reworked in commit 7d2cd72a
("drm/shmem-helpers: Simplify dma-buf importing"). Before that commit
drm_gem_shmem_prime_import_sg_table() did set ->pages_use_count=1 and
drm_gem_shmem_vunmap_locked() could call drm_gem_shmem_put_pages()
unconditionally. Now without the use count set, put pages is called also
on dma-bufs. Fix this by only putting pages if it's not imported.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Fixes: 7d2cd72a ("drm/shmem-helpers: Simplify dma-buf importing")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219122203.51130-1-noralf@tronnes.org
(cherry picked from commit cdea7251)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Problem: random stucks on reboot stage about 1/20 stuck/reboots
// debug kernel log
[    4.496660] reboot: kernel restart prepare CMD:(null)
[    4.498114] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown begin
[    4.503949] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown domain 0:VPU...
...STUCK...

Solution: add shutdown function to meson_drm driver
// debug kernel log
[    5.231896] reboot: kernel restart prepare CMD:(null)
[    5.246135] [drm:meson_drv_shutdown]
...
[    5.259271] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown begin
[    5.274688] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown domain 0:VPU...
[    5.338331] reboot: Restarting system
[    5.358293] psci: PSCI_0_2_FN_SYSTEM_RESET reboot_mode:0 cmd:(null)
bl31 reboot reason: 0xd
bl31 reboot reason: 0x0
system cmd  1.
...REBOOT...

Tested: on VIM1 VIM2 VIM3 VIM3L khadas sbcs - 1000+ successful reboots
and Odroid boards, WeTek Play2 (GXBB)

Fixes: bbbe775e ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Artem Lapkin <art@khadas.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210302042202.3728113-1-art@khadas.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

When mmapping the shmem, it would previously adjust the pgoff in the
vm_area_struct to remove the fake offset that is added to be able to
identify the buffer. This patch removes the adjustment and makes the
fault handler use the vm_fault address to calculate the page offset
instead. Although using this address is apparently discouraged, several
DRM drivers seem to be doing it anyway.

The problem with removing the pgoff is that it prevents
drm_vma_node_unmap from working because that searches the mapping tree
by address. That doesn't work because all of the mappings are at offset
0. drm_vma_node_unmap is being used by the shmem helpers when purging
the buffer.

This fixes a bug in Panfrost which is using drm_gem_shmem_purge. Without
this the mapping for the purged buffer can still be accessed which might
mean it would access random pages from other buffers

v2: Don't check whether the unsigned page_offset is less than 0.

Cc: stable@vger.kernel.org
Fixes: 17acb9f3 ("drm/shmem: Add madvise state and purge helpers")
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210223155125.199577-3-nroberts@igalia.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

When a buffer is madvised as not needed and then purged, any attempts to
access the buffer from user-space should cause a bus fault. This patch
adds a check for that.

Cc: stable@vger.kernel.org
Fixes: 17acb9f3 ("drm/shmem: Add madvise state and purge helpers")
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210223155125.199577-2-nroberts@igalia.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

The surface_id struct field in head is not being initialized and
static analysis warns that this is being passed through to
dev->monitors_config->heads[i] on an assignment. Clear up this
warning by initializing it to zero.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: a6d3c4d7 ("qxl: hook monitors_config updates into crtc, not encoder.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210304094928.2280722-1-colin.king@canonical.comSigned-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Freed pages are not subtracted from the allocated_pages counter in
ttm_pool_type_fini(), causing a leak in the count on device removal.
The next shrinker invocation loops forever trying to free pages that are
no longer in the pool:

  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu:  3-....: (9998 ticks this GP) idle=54e/1/0x4000000000000000 softirq=434857/434857 fqs=2237
    (t=10001 jiffies g=2194533 q=49211)
  NMI backtrace for cpu 3
  CPU: 3 PID: 1034 Comm: kswapd0 Tainted: P           O      5.11.0-com #1
  Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 1405 11/19/2019
  Call Trace:
   <IRQ>
   ...
   </IRQ>
   sysvec_apic_timer_interrupt+0x77/0x80
   asm_sysvec_apic_timer_interrupt+0x12/0x20
  RIP: 0010:mutex_unlock+0x16/0x20
  Code: e7 48 8b 70 10 e8 7a 53 77 ff eb aa e8 43 6c ff ff 0f 1f 00 65 48 8b 14 25 00 6d 01 00 31 c9 48 89 d0 f0 48 0f b1 0f 48 39 c2 <74> 05 e9 e3 fe ff ff c3 66 90 48 8b 47 20 48 85 c0 74 0f 8b 50 10
  RSP: 0018:ffffbdb840797be8 EFLAGS: 00000246
  RAX: ffff9ff445a41c00 RBX: ffffffffc02a9ef8 RCX: 0000000000000000
  RDX: ffff9ff445a41c00 RSI: ffffbdb840797c78 RDI: ffffffffc02a9ac0
  RBP: 0000000000000080 R08: 0000000000000000 R09: ffffbdb840797c80
  R10: 0000000000000000 R11: fffffffffffffff5 R12: 0000000000000000
  R13: 0000000000000000 R14: 0000000000000084 R15: ffffffffc02a9a60
   ttm_pool_shrink+0x7d/0x90 [ttm]
   ttm_pool_shrinker_scan+0x5/0x20 [ttm]
   do_shrink_slab+0x13a/0x1a0
...

debugfs shows the incorrect total:

  $ cat /sys/kernel/debug/dri/0/ttm_page_pool
            --- 0--- --- 1--- --- 2--- --- 3--- --- 4--- --- 5--- --- 6--- --- 7--- --- 8--- --- 9--- ---10---
  wc      :        0        0        0        0        0        0        0        0        0        0        0
  uc      :        0        0        0        0        0        0        0        0        0        0        0
  wc 32   :        0        0        0        0        0        0        0        0        0        0        0
  uc 32   :        0        0        0        0        0        0        0        0        0        0        0
  DMA uc  :        0        0        0        0        0        0        0        0        0        0        0
  DMA wc  :        0        0        0        0        0        0        0        0        0        0        0
  DMA     :        0        0        0        0        0        0        0        0        0        0        0

  total   :     3029 of  8244261

Using ttm_pool_type_take() to remove pages from the pool before freeing
them correctly accounts for the freed pages.

Fixes: d099fc8f ("drm/ttm: new TT backend allocation pool v3")
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210303011723.22512-1-ajderossi@gmail.comReviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

QXL indeed unrefs pinned BOs and the warnings are spamming peoples log files.

Make sure we warn only once until the QXL driver is fixed.
Signed-off-by: Christian König <christian.koenig@amd.com>
References: https://lore.kernel.org/lkml/YD+eYcMMcdlXB8PY@alley/
Link: https://patchwork.freedesktop.org/patch/422834/Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

USB devices cannot perform DMA and hence have no dma_mask set in their
device structure. Therefore importing dmabuf into a USB-based driver
fails, which breaks joining and mirroring of display in X11.

For USB devices, pick the associated USB controller as attachment device.
This allows the DRM import helpers to perform the DMA setup. If the DMA
controller does not support DMA transfers, we're out of luck and cannot
import. Our current USB-based DRM drivers don't use DMA, so the actual
DMA device is not important.

Tested by joining/mirroring displays of udl and radeon under Gnome/X11.

v8:
	* release dmadev if device initialization fails (Noralf)
	* fix commit description (Noralf)
v7:
	* fix use-before-init bug in gm12u320 (Dan)
v6:
	* implement workaround in DRM drivers and hold reference to
	  DMA device while USB device is in use
	* remove dev_is_usb() (Greg)
	* collapse USB helper into usb_intf_get_dma_device() (Alan)
	* integrate Daniel's TODO statement (Daniel)
	* fix typos (Greg)
v5:
	* provide a helper for USB interfaces (Alan)
	* add FIXME item to documentation and TODO list (Daniel)
v4:
	* implement workaround with USB helper functions (Greg)
	* use struct usb_device->bus->sysdev as DMA device (Takashi)
v3:
	* drop gem_create_object
	* use DMA mask of USB controller, if any (Daniel, Christian, Noralf)
v2:
	* move fix to importer side (Christian, Daniel)
	* update SHMEM and CMA helpers for new PRIME callbacks
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6eb0233e ("usb: don't inherity DMA properties for USB devices")
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210303133229.3288-1-tzimmermann@suse.deSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

The original bugzilla seems to be read-only now, linking to the gitlab
for new bugs.
Signed-off-by: Pavel Turinský <ledoian@kam.mff.cuni.cz>
Cc: trivial@kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210228163658.54962-1-ledoian@kam.mff.cuni.czSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Include PPC_PMAC in the configs that use aty_ld_lcd() and
aty_st_lcd() implementations so that the PM code may work
correctly for PPC_PMAC.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226173008.18236-1-rdunlap@infradead.orgSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

The previously added stubs for aty_{ld,}st_lcd() make it
so that these functions are used regardless of the config
options that were guarding them, so remove the #ifdef/#endif
lines and make their declarations always visible.
This fixes build warnings that were reported by clang:

   drivers/video/fbdev/aty/atyfb_base.c:180:6: warning: no previous prototype for function 'aty_st_lcd' [-Wmissing-prototypes]
   void aty_st_lcd(int index, u32 val, const struct atyfb_par *par)
        ^
   drivers/video/fbdev/aty/atyfb_base.c:180:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
   void aty_st_lcd(int index, u32 val, const struct atyfb_par *par)

   drivers/video/fbdev/aty/atyfb_base.c:183:5: warning: no previous prototype for function 'aty_ld_lcd' [-Wmissing-prototypes]
   u32 aty_ld_lcd(int index, const struct atyfb_par *par)
       ^
   drivers/video/fbdev/aty/atyfb_base.c:183:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
   u32 aty_ld_lcd(int index, const struct atyfb_par *par)

They should not be marked as static since they are used in
mach64_ct.c.

Fixes: bfa5782b ("fbdev: atyfb: add stubs for aty_{ld,st}_lcd()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224215528.822-1-rdunlap@infradead.orgAcked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Call qxl_bo_unpin (which does a reservation) without holding the
release_mutex lock.  Fixes lockdep (correctly) warning on a possible
deadlock.

Fixes: e8dd3506 ("drm/qxl: unpin release objects")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-5-kraxel@redhat.com
(cherry picked from commit 19089b76)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Balances the qxl_create_bo(..., pinned=true, ...);
call in qxl_release_bo_alloc().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-5-kraxel@redhat.com
(cherry picked from commit 65ffea3c)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm_fbdev_cleanup() can be called when fb_helper->buffer is null, hence
fb_helper->buffer should be checked before calling
drm_client_buffer_vunmap(). This buffer is also checked in
drm_client_framebuffer_delete(), so we should also do the same thing for
drm_client_buffer_vunmap().

[  199.128742] RIP: 0010:drm_client_buffer_vunmap+0xd/0x20
[  199.129031] Code: 43 18 48 8b 53 20 49 89 45 00 49 89 55 08 5b 44 89 e0 41 5c 41 5d 41 5e 5d
c3 0f 1f 00 53 48 89 fb 48 8d 7f 10 e8 73 7d a1 ff <48> 8b 7b 10 48 8d 73 18 5b e9 75 53 fc ff 0
f 1f 44 00 00 48 b8 00
[  199.130041] RSP: 0018:ffff888103f3fc88 EFLAGS: 00010282
[  199.130329] RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffffffff8214d46d
[  199.130733] RDX: 1ffffffff079c6b9 RSI: 0000000000000246 RDI: ffffffff83ce35c8
[  199.131119] RBP: ffff888103d25458 R08: 0000000000000001 R09: fffffbfff0791761
[  199.131505] R10: ffffffff83c8bb07 R11: fffffbfff0791760 R12: 0000000000000000
[  199.131891] R13: ffff888103d25468 R14: ffff888103d25418 R15: ffff888103f18120
[  199.132277] FS:  00007f36fdcbb6a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000
[  199.132721] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  199.133033] CR2: 0000000000000010 CR3: 0000000103d26000 CR4: 00000000000006f0
[  199.133420] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  199.133807] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  199.134195] Call Trace:
[  199.134333]  drm_fbdev_cleanup+0x179/0x1a0
[  199.134562]  drm_fbdev_client_unregister+0x2b/0x40
[  199.134828]  drm_client_dev_unregister+0xa8/0x180
[  199.135088]  drm_dev_unregister+0x61/0x110
[  199.135315]  mgag200_pci_remove+0x38/0x52 [mgag200]
[  199.135586]  pci_device_remove+0x62/0xe0
[  199.135806]  device_release_driver_internal+0x148/0x270
[  199.136094]  driver_detach+0x76/0xe0
[  199.136294]  bus_remove_driver+0x7e/0x100
[  199.136521]  pci_unregister_driver+0x28/0xf0
[  199.136759]  __x64_sys_delete_module+0x268/0x300
[  199.137016]  ? __ia32_sys_delete_module+0x300/0x300
[  199.137285]  ? call_rcu+0x3e4/0x580
[  199.137481]  ? fpregs_assert_state_consistent+0x4d/0x60
[  199.137767]  ? exit_to_user_mode_prepare+0x2f/0x130
[  199.138037]  do_syscall_64+0x33/0x40
[  199.138237]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  199.138517] RIP: 0033:0x7f36fdc3dcf7
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Fixes: 763aea17 ("drm/fb-helper: Unmap client buffer during shutdown")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210228044625.171151-1-ztong0001@gmail.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Pull rdma fixes from Jason Gunthorpe:
 "Nothing special here, though Bob's regression fixes for rxe would have
  made it before the rc cycle had there not been such strong winter
  weather!

   - Fix corner cases in the rxe reference counting cleanup that are
     causing regressions in blktests for SRP

   - Two kdoc fixes so W=1 is clean

   - Missing error return in error unwind for mlx5

   - Wrong lock type nesting in IB CM"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
  RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
  RDMA/rxe: Fix missed IB reference counting in loopback
  RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
  RDMA/mlx5: Set correct kernel-doc identifier
  IB/mlx5: Add missing error code
  RDMA/rxe: Fix missing kconfig dependency on CRYPTO
  RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep

Pull gcc-plugins fixes from Kees Cook:
 "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
  been reported a couple times now by static analyzers, so best to get
  them fixed to reduce the noise. :)

   - Fix coding style issues (Jason Yan)"

* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: latent_entropy: remove unneeded semicolon
  gcc-plugins: structleak: remove unneeded variable 'ret'

Pull pstore fixes from Kees Cook:

 - Rate-limit ECC warnings (Dmitry Osipenko)

 - Fix error path check for NULL (Tetsuo Handa)

* tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Rate-limit "uncorrectable error in header" message
  pstore: Fix warning in pstore_kill_sb()

Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
 "Fix DM verity target's optional Forward Error Correction (FEC) for
  Reed-Solomon roots that are unaligned to block size"

* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: fix FEC for RS roots unaligned to block size
  dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size

Pull block fixes from Jens Axboe:

 - NVMe fixes:
      - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal
        Terjan)
      - fix a hwmon error return (Daniel Wagner)
      - fix the keep alive timeout initialization (Martin George)
      - ensure the model_number can't be changed on a used subsystem
        (Max Gurtovoy)

 - rsxx missing -EFAULT on copy_to_user() failure (Dan)

 - rsxx remove unused linux.h include (Tian)

 - kill unused RQF_SORTED (Jean)

 - updated outdated BFQ comments (Joseph)

 - revert work-around commit for bd_size_lock, since we removed the
   offending user in this merge window (Damien)

* tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block:
  nvmet: model_number must be immutable once set
  nvme-fabrics: fix kato initialization
  nvme-hwmon: Return error code when registration fails
  nvme-pci: add quirks for Lexar 256GB SSD
  nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
  nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
  rsxx: Return -EFAULT if copy_to_user() fails
  block/bfq: update comments and default value in docs for fifo_expire
  rsxx: remove unused including <linux/version.h>
  block: Drop leftover references to RQF_SORTED
  block: revert "block: fix bd_size_lock use"

Pull io_uring fixes from Jens Axboe:
 "A bit of a mix between fallout from the worker change, cleanups and
  reductions now possible from that change, and fixes in general. In
  detail:

   - Fully serialize manager and worker creation, fixing races due to
     that.

   - Clean up some naming that had gone stale.

   - SQPOLL fixes.

   - Fix race condition around task_work rework that went into this
     merge window.

   - Implement unshare. Used for when the original task does unshare(2)
     or setuid/seteuid and friends, drops the original workers and forks
     new ones.

   - Drop the only remaining piece of state shuffling we had left, which
     was cred. Move it into issue instead, and we can drop all of that
     code too.

   - Kill f_op->flush() usage. That was such a nasty hack that we had
     out of necessity, we no longer need it.

   - Following from ->flush() removal, we can also drop various bits of
     ctx state related to SQPOLL and cancelations.

   - Fix an issue with IOPOLL retry, which originally was fallout from a
     filemap change (removing iov_iter_revert()), but uncovered an issue
     with iovec re-import too late.

   - Fix an issue with system suspend.

   - Use xchg() for fallback work, instead of cmpxchg().

   - Properly destroy io-wq on exec.

   - Add create_io_thread() core helper, and use that in io-wq and
     io_uring. This allows us to remove various silly completion events
     related to thread setup.

   - A few error handling fixes.

  This should be the grunt of fixes necessary for the new workers, next
  week should be quieter. We've got a pending series from Pavel on
  cancelations, and how tasks and rings are indexed. Outside of that,
  should just be minor fixes. Even with these fixes, we're still killing
  a net ~80 lines"

* tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits)
  io_uring: don't restrict issue_flags for io_openat
  io_uring: make SQPOLL thread parking saner
  io-wq: kill hashed waitqueue before manager exits
  io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
  io_uring: don't keep looping for more events if we can't flush overflow
  io_uring: move to using create_io_thread()
  kernel: provide create_io_thread() helper
  io_uring: reliably cancel linked timeouts
  io_uring: cancel-match based on flags
  io-wq: ensure all pending work is canceled on exit
  io_uring: ensure that threads freeze on suspend
  io_uring: remove extra in_idle wake up
  io_uring: inline __io_queue_async_work()
  io_uring: inline io_req_clean_work()
  io_uring: choose right tctx->io_wq for try cancel
  io_uring: fix -EAGAIN retry with IOPOLL
  io-wq: fix error path leak of buffered write hash map
  io_uring: remove sqo_task
  io_uring: kill sqo_dead and sqo submission halting
  io_uring: ignore double poll add on the same waitqueue head
  ...

Pull power management fixes from Rafael Wysocki:
 "These fix the usage of device links in the runtime PM core code and
  update the DTPM (Dynamic Thermal Power Management) feature added
  recently.

  Specifics:

   - Make the runtime PM core code avoid attempting to suspend supplier
     devices before updating the PM-runtime status of a consumer to
     'suspended' (Rafael Wysocki).

   - Fix DTPM (Dynamic Thermal Power Management) root node
     initialization and label that feature as EXPERIMENTAL in Kconfig
     (Daniel Lezcano)"

* tag 'pm-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap/drivers/dtpm: Add the experimental label to the option description
  powercap/drivers/dtpm: Fix root node initialization
  PM: runtime: Update device status before letting suppliers suspend

Pull ACPI fix from Rafael Wysocki:
 "Make the empty stubs of some helper functions used when CONFIG_ACPI is
  not set actually match those functions (Andy Shevchenko)"

* tag 'acpi-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: bus: Constify is_acpi_node() and friends (part 2)

Pull iommu fixes from Joerg Roedel:

 - Fix a sleeping-while-atomic issue in the AMD IOMMU code

 - Disable lazy IOTLB flush for untrusted devices in the Intel VT-d
   driver

 - Fix status code definitions for Intel VT-d

 - Fix IO Page Fault issue in Tegra IOMMU driver

* tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix status code for Allocate/Free PASID command
  iommu: Don't use lazy flush for untrusted device
  iommu/tegra-smmu: Fix mc errors on tegra124-nyan
  iommu/amd: Fix sleeping in atomic in increase_address_space()

Pull btrfs fixes from David Sterba:
 "More regression fixes and stabilization.

  Regressions:

   - zoned mode
      - count zone sizes in wider int types
      - fix space accounting for read-only block groups

   - subpage: fix page tail zeroing

  Fixes:

   - fix spurious warning when remounting with free space tree

   - fix warning when creating a directory with smack enabled

   - ioctl checks for qgroup inheritance when creating a snapshot

   - qgroup
      - fix missing unlock on error path in zero range
      - fix amount of released reservation on error
      - fix flushing from unsafe context with open transaction,
        potentially deadlocking

   - minor build warning fixes"

* tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: do not account freed region of read-only block group as zone_unusable
  btrfs: zoned: use sector_t for zone sectors
  btrfs: subpage: fix the false data csum mismatch error
  btrfs: fix warning when creating a directory with smack enabled
  btrfs: don't flush from btrfs_delayed_inode_reserve_metadata
  btrfs: export and rename qgroup_reserve_meta
  btrfs: free correct amount of space in btrfs_delayed_inode_reserve_metadata
  btrfs: fix spurious free_space_tree remount warning
  btrfs: validate qgroup inherit for SNAP_CREATE_V2 ioctl
  btrfs: unlock extents in btrfs_zero_range in case of quota reservation errors
  btrfs: ref-verify: use 'inline void' keyword ordering

Pull devicetree fixes from Rob Herring:

 - Another batch of graph and video-interfaces schema conversions

 - Drop DT header symlink for dropped C6X arch

 - Fix bcm2711-hdmi schema error

* tag 'devicetree-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: media: Use graph and video-interfaces schemas, round 2
  dts: drop dangling c6x symlink
  dt-bindings: bcm2711-hdmi: Fix broken schema

Pull tracing fixes from Steven Rostedt:
 "Functional fixes:

   - Fix big endian conversion for arm64 in recordmcount processing

   - Fix timestamp corruption in ring buffer on discarding events

   - Fix memory leak in __create_synth_event()

   - Skip selftests if tracing is disabled as it will cause them to
     fail.

  Non-functional fixes:

   - Fix help text in Kconfig

   - Remove duplicate prototype for trace_empty()

   - Fix stale comment about the trace_event_call flags.

  Self test update:

   - Add more information to the validation output of when a corrupt
     timestamp is found in the ring buffer, and also trigger a warning
     to make sure that tests catch it"

* tag 'trace-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix comment about the trace_event_call flags
  tracing: Skip selftests if tracing is disabled
  tracing: Fix memory leak in __create_synth_event()
  ring-buffer: Add a little more information and a WARN when time stamp going backwards is detected
  ring-buffer: Force before_stamp and write_stamp to be different on discard
  tracing: Fix help text of TRACEPOINT_BENCHMARK in Kconfig
  tracing: Remove duplicate declaration from trace.h
  ftrace: Have recordmcount use w8 to read relp->r_info in arm64_is_fake_mcount

In rxe_comp.c in rxe_completer() the function free_pkt() did not clear skb
which triggered a warning at 'done:' and could possibly at 'exit:'. The
WARN_ONCE() calls are not actually needed.  The call to free_pkt() is
moved to the end to clearly show that all skbs are freed.

Fixes: 899aba89 ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

rxe_rcv_mcast_pkt() dropped a reference to ib_device when no error
occurred causing an underflow on the reference counter.  This code is
cleaned up to be clearer and easier to read.

Fixes: 899aba89 ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

When the noted patch below extending the reference taken by
rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed it
was not matched by a reference in the loopback path resulting in
underflows.

Fixes: 899aba89 ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

45d189c6 ("io_uring: replace force_nonblock with flags") did
something strange for io_openat() slicing all issue_flags but
IO_URING_F_NONBLOCK. Not a bug for now, but better to just forward the
flags.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe fixes from Christoph:

"nvme fixes for 5.12:

 - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan)
 - fix a hwmon error return (Daniel Wagner)
 - fix the keep alive timeout initialization (Martin George)
 - ensure the model_number can't be changed on a used subsystem
   (Max Gurtovoy)"

* tag 'nvme-5.12-2021-03-05' of git://git.infradead.org/nvme:
  nvmet: model_number must be immutable once set
  nvme-fabrics: fix kato initialization
  nvme-hwmon: Return error code when registration fails
  nvme-pci: add quirks for Lexar 256GB SSD
  nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
  nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.

We have this weird true/false return from parking, and then some of the
callers decide to look at that. It can lead to unbalanced parks and
sqd locking. Have the callers check the thread status once it's parked.
We know we have the lock at that point, so it's either valid or it's NULL.

Fix race with parking on thread exit. We need to be careful here with
ordering of the sdq->lock and the IO_SQ_THREAD_SHOULD_PARK bit.

Rename sqd->completion to sqd->parked to reflect that this is the only
thing this completion event doesn.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we race with shutting down the io-wq context and someone queueing
a hashed entry, then we can exit the manager with it armed. If it then
triggers after the manager has exited, we can have a use-after-free where
io_wqe_hash_wake() attempts to wake a now gone manager process.

Move the killing of the hashed write queue into the manager itself, so
that we know we've killed it before the task exits.

Fixes: e941894e ("io-wq: make buffered file write hashed work map per-ctx")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The callback can only be armed, if we get -EIOCBQUEUED returned. It's
important that we clear the WAITQ bit for other cases, otherwise we can
queue for async retry and filemap will assume that we're armed and
return -EAGAIN instead of just blocking for the IO.

Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It doesn't make sense to wait for more events to come in, if we can't
even flush the overflow we already have to the ring. Return -EBUSY for
that condition, just like we do for attempts to submit with overflow
pending.

Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This allows us to do task creation and setup without needing to use
completions to try and synchronize with the starting thread. Get rid of
the old io_wq_fork_thread() wrapper, and the 'wq' and 'worker' startup
completion events - we can now do setup before the task is running.
Signed-off-by: Jens Axboe <axboe@kernel.dk>