Skip to content

L
linux
Switch branch/tag
  1. 28 Oct, 2019 2 commits
  3. 24 Oct, 2019 1 commit
  5. 13 Oct, 2019 1 commit
  7. 11 Oct, 2019 7 commits
  9. 10 Oct, 2019 1 commit
  11. 09 Oct, 2019 4 commits
  13. 06 Oct, 2019 4 commits
    • Linus Torvalds's avatar
      Linux 5.4-rc2 · da0c9ea1
      Linus Torvalds authored
      da0c9ea1
    • Linus Torvalds's avatar
      elf: don't use MAP_FIXED_NOREPLACE for elf executable mappings · b212921b
      Linus Torvalds authored 
      In commit 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map") we
changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the
executable mappings.

Then, people reported that it broke some binaries that had overlapping
segments from the same file, and commit ad55eac7 ("elf: enforce
MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some
overlaying elf segment cases.  But only some - despite the summary line
of that commit, it only did it when it also does a temporary brk vma for
one obvious overlapping case.

Now Russell King reports another overlapping case with old 32-bit x86
binaries, which doesn't trigger that limited case.  End result: we had
better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED.

Yes, it's a sign of old binaries generated with old tool-chains, but we
do pride ourselves on not breaking existing setups.

This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp()
and the old load_elf_library() use-cases, because nobody has reported
breakage for those. Yet.

Note that in all the cases seen so far, the overlapping elf sections
seem to be just re-mapping of the same executable with different section
attributes.  We could possibly introduce a new MAP_FIXED_NOFILECHANGE
flag or similar, which acts like NOREPLACE, but allows just remapping
the same executable file using different protection flags.

It's not clear that would make a huge difference to anything, but if
people really hate that "elf remaps over previous maps" behavior, maybe
at least a more limited form of remapping would alleviate some concerns.

Alternatively, we should take a look at our elf_map() logic to see if we
end up not mapping things properly the first time.

In the meantime, this is the minimal "don't do that then" patch while
people hopefully think about it more.
Reported-by: default avatarRussell King <linux@armlinux.org.uk>
Fixes: 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map")
Fixes: ad55eac7 ("elf: enforce  MAP_FIXED on overlaying elf segments")
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b212921b
    • Linus Torvalds's avatar
      Merge tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping · 7cdb85df
      Linus Torvalds authored 
      Pull dma-mapping regression fix from Christoph Hellwig:
 "Revert an incorret hunk from a patch that caused problems on various
  arm boards (Andrey Smirnov)"

* tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: fix false positive warnings in dma_common_free_remap()
      7cdb85df
    • Linus Torvalds's avatar
      Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc · 43b815c6
      Linus Torvalds authored 
      Pull ARM SoC fixes from Olof Johansson:
 "A few fixes this time around:

   - Fixup of some clock specifications for DRA7 (device-tree fix)

   - Removal of some dead/legacy CPU OPP/PM code for OMAP that throws
     warnings at boot

   - A few more minor fixups for OMAPs, most around display

   - Enable STM32 QSPI as =y since their rootfs sometimes comes from
     there

   - Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool

   - Fix of thermal zone definition for ux500 (5.4 regression)"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support
  ARM: dts: ux500: Fix up the CPU thermal zone
  arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y
  ARM: dts: am4372: Set memory bandwidth limit for DISPC
  ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  ARM: OMAP2+: Add missing LCDC midlemode for am335x
  ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  ARM: dts: Fix gpio0 flags for am335x-icev2
  ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
  ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
  DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  ARM: dts: Fix wrong clocks for dra7 mcasp
  clk: ti: dra7: Fix mcasp8 clock bits
      43b815c6
  15. 05 Oct, 2019 20 commits
    • Linus Torvalds's avatar
      Merge tag 'kbuild-fixes-v5.4' of... · 2d00aee2
      Linus Torvalds authored 
      Merge tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - remove unneeded ar-option and KBUILD_ARFLAGS

 - remove long-deprecated SUBDIRS

 - fix modpost to suppress false-positive warnings for UML builds

 - fix namespace.pl to handle relative paths to ${objtree}, ${srctree}

 - make setlocalversion work for /bin/sh

 - make header archive reproducible

 - fix some Makefiles and documents

* tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: make headers archive reproducible
  kbuild: update compile-test header list for v5.4-rc2
  kbuild: two minor updates for Documentation/kbuild/modules.rst
  scripts/setlocalversion: clear local variable to make it work for sh
  namespace: fix namespace.pl script to support relative paths
  video/logo: do not generate unneeded logo C files
  video/logo: remove unneeded *.o pattern from clean-files
  integrity: remove pointless subdir-$(CONFIG_...)
  integrity: remove unneeded, broken attempt to add -fshort-wchar
  modpost: fix static EXPORT_SYMBOL warnings for UML build
  kbuild: correct formatting of header in kbuild module docs
  kbuild: remove SUBDIRS support
  kbuild: remove ar-option and KBUILD_ARFLAGS
      2d00aee2
    • Linus Torvalds's avatar
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 126195c9
      Linus Torvalds authored 
      Pull SCSI fixes from James Bottomley:
 "Twelve patches mostly small but obvious fixes or cosmetic but small
  updates"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix Nport ID display value
  scsi: qla2xxx: Fix N2N link up fail
  scsi: qla2xxx: Fix N2N link reset
  scsi: qla2xxx: Optimize NPIV tear down process
  scsi: qla2xxx: Fix stale mem access on driver unload
  scsi: qla2xxx: Fix unbound sleep in fcport delete path.
  scsi: qla2xxx: Silence fwdump template message
  scsi: hisi_sas: Make three functions static
  scsi: megaraid: disable device when probe failed after enabled device
  scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue
  scsi: qedf: Remove always false 'tmp_prio < 0' statement
  scsi: ufs: skip shutdown if hba is not powered
  scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF
      126195c9
    • Linus Torvalds's avatar
      Merge branch 'readdir' (readdir speedup and sanity checking) · 4f11918a
      Linus Torvalds authored 
      This makes getdents() and getdents64() do sanity checking on the
pathname that it gives to user space.  And to mitigate the performance
impact of that, it first cleans up the way it does the user copying, so
that the code avoids doing the SMAP/PAN updates between each part of the
dirent structure write.

I really wanted to do this during the merge window, but didn't have
time.  The conversion of filldir to unsafe_put_user() is something I've
had around for years now in a private branch, but the extra pathname
checking finally made me clean it up to the point where it is mergable.

It's worth noting that the filename validity checking really should be a
bit smarter: it would be much better to delay the error reporting until
the end of the readdir, so that non-corrupted filenames are still
returned.  But that involves bigger changes, so let's see if anybody
actually hits the corrupt directory entry case before worrying about it
further.

* branch 'readdir':
  Make filldir[64]() verify the directory entry filename is valid
  Convert filldir[64]() from __put_user() to unsafe_put_user()
      4f11918a
    • Linus Torvalds's avatar
      Make filldir[64]() verify the directory entry filename is valid · 8a23eb80
      Linus Torvalds authored 
      This has been discussed several times, and now filesystem people are
talking about doing it individually at the filesystem layer, so head
that off at the pass and just do it in getdents{64}().

This is partially based on a patch by Jann Horn, but checks for NUL
bytes as well, and somewhat simplified.

There's also commentary about how it might be better if invalid names
due to filesystem corruption don't cause an immediate failure, but only
an error at the end of the readdir(), so that people can still see the
filenames that are ok.

There's also been discussion about just how much POSIX strictly speaking
requires this since it's about filesystem corruption.  It's really more
"protect user space from bad behavior" as pointed out by Jann.  But
since Eric Biederman looked up the POSIX wording, here it is for context:

 "From readdir:

   The readdir() function shall return a pointer to a structure
   representing the directory entry at the current position in the
   directory stream specified by the argument dirp, and position the
   directory stream at the next entry. It shall return a null pointer
   upon reaching the end of the directory stream. The structure dirent
   defined in the <dirent.h> header describes a directory entry.

  From definitions:

   3.129 Directory Entry (or Link)

   An object that associates a filename with a file. Several directory
   entries can associate names with the same file.

  ...

   3.169 Filename

   A name consisting of 1 to {NAME_MAX} bytes used to name a file. The
   characters composing the name may be selected from the set of all
   character values excluding the slash character and the null byte. The
   filenames dot and dot-dot have special meaning. A filename is
   sometimes referred to as a 'pathname component'."

Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.

Also note that if this ends up being noticeable as a performance
regression, we can fix that to do a much more optimized model that
checks for both NUL and '/' at the same time one word at a time.

We haven't really tended to optimize 'memchr()', and it only checks for
one pattern at a time anyway, and we really _should_ check for NUL too
(but see the comment about "soft errors" in the code about why it
currently only checks for '/')

See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name
lookup code looks for pathname terminating characters in parallel.

Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8a23eb80
    • Linus Torvalds's avatar
      Convert filldir[64]() from __put_user() to unsafe_put_user() · 9f79b78e
      Linus Torvalds authored 
      We really should avoid the "__{get,put}_user()" functions entirely,
because they can easily be mis-used and the original intent of being
used for simple direct user accesses no longer holds in a post-SMAP/PAN
world.

Manually optimizing away the user access range check makes no sense any
more, when the range check is generally much cheaper than the "enable
user accesses" code that the __{get,put}_user() functions still need.

So instead of __put_user(), use the unsafe_put_user() interface with
user_access_{begin,end}() that really does generate better code these
days, and which is generally a nicer interface.  Under some loads, the
multiple user writes that filldir() does are actually quite noticeable.

This also makes the dirent name copy use unsafe_put_user() with a couple
of macros.  We do not want to make function calls with SMAP/PAN
disabled, and the code this generates is quite good when the
architecture uses "asm goto" for unsafe_put_user() like x86 does.

Note that this doesn't bother with the legacy cases.  Nobody should use
them anyway, so performance doesn't really matter there.
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9f79b78e
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 9819a30c
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold.

 2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric
    Dumazet.

 3) txq null deref in mac80211, from Miaoqing Pan.

 4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann.

 5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso.

 6) Avoid division by zero in taprio scheduler, from Vladimir Oltean.

 7) Various xgmac fixes in stmmac driver from Jose Abreu.

 8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from
    Michal Kubecek.

 9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij.

10) Fix sleep while atomic in sja1105, from Vladimir Oltean.

11) Suspend/resume deadlock in stmmac, from Thierry Reding.

12) Various UDP GSO fixes from Josh Hunt.

13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric
    Dumazet.

14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern.

15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  selftests/net: add nettest to .gitignore
  net: qlogic: Fix memory leak in ql_alloc_large_buffers
  nfc: fix memory leak in llcp_sock_bind()
  sch_dsmark: fix potential NULL deref in dsmark_init()
  net: phy: at803x: use operating parameters from PHY-specific status
  net: phy: extract pause mode
  net: phy: extract link partner advertisement reading
  net: phy: fix write to mii-ctrl1000 register
  ipv6: Handle missing host route in __ipv6_ifa_notify
  net: phy: allow for reset line to be tied to a sleepy GPIO controller
  net: ipv4: avoid mixed n_redirects and rate_tokens usage
  r8152: Set macpassthru in reset_resume callback
  cxgb4:Fix out-of-bounds MSI-X info array access
  Revert "ipv6: Handle race in addrconf_dad_work"
  net: make sock_prot_memory_pressure() return "const char *"
  rxrpc: Fix rxrpc_recvmsg tracepoint
  qmi_wwan: add support for Cinterion CLS8 devices
  tcp: fix slab-out-of-bounds in tcp_zerocopy_receive()
  lib: textsearch: fix escapes in example code
  udp: only do GSO if # of segs > 1
  ...
      9819a30c
    • Linus Torvalds's avatar
      Merge tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux · 6fe137cb
      Linus Torvalds authored 
      Pull s390 fixes from Vasily Gorbik:

 - defconfig updates

 - Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i"
   constraint for function arguments. Two kvm changes acked-by Christian
   Borntraeger.

 - Fix -Wunused-but-set-variable warnings in mm code.

 - Avoid a constant misuse in qdio.

 - Handle a case when cpumf is temporarily unavailable.

* tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  KVM: s390: mark __insn32_query() as __always_inline
  KVM: s390: fix __insn32_query() inline assembly
  s390: update defconfigs
  s390/pci: mark function(s) __always_inline
  s390/mm: mark function(s) __always_inline
  s390/jump_label: mark function(s) __always_inline
  s390/cpu_mf: mark function(s) __always_inline
  s390/atomic,bitops: mark function(s) __always_inline
  s390/mm: fix -Wunused-but-set-variable warnings
  s390: mark __cpacf_query() as __always_inline
  s390/qdio: clarify size of the QIB parm area
  s390/cpumf: Fix indentation in sampling device driver
  s390/cpumsf: Check for CPU Measurement sampling
  s390/cpumf: Use consistant debug print format
      6fe137cb
    • Heiko Carstens's avatar
      KVM: s390: mark __insn32_query() as __always_inline · d0dea733
      Heiko Carstens authored 
      __insn32_query() will not compile if the compiler decides to not
inline it, since it contains an inline assembly with an "i" constraint
with variable contents.
Acked-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: default avatarVasily Gorbik <gor@linux.ibm.com>
      d0dea733
    • Heiko Carstens's avatar
      KVM: s390: fix __insn32_query() inline assembly · b1c41ac3
      Heiko Carstens authored 
      The inline assembly constraints of __insn32_query() tell the compiler
that only the first byte of "query" is being written to. Intended was
probably that 32 bytes are written to.

Fix and simplify the code and just use a "memory" clobber.

Fixes: d6681397 ("KVM: s390: provide query function for instructions returning 32 byte")
Cc: stable@vger.kernel.org # v5.2+
Acked-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: default avatarVasily Gorbik <gor@linux.ibm.com>
      b1c41ac3
    • Andrey Smirnov's avatar
      dma-mapping: fix false positivse warnings in dma_common_free_remap() · 2cf2aa6a
      Andrey Smirnov authored 
      Commit 5cf45379 ("dma-mapping: introduce a dma_common_find_pages
helper") changed invalid input check in dma_common_free_remap() from:

    if (!area || !area->flags != VM_DMA_COHERENT)

to

    if (!area || !area->flags != VM_DMA_COHERENT || !area->pages)

which seem to produce false positives for memory obtained via
dma_common_contiguous_remap()

This triggers the following warning message when doing "reboot" on ZII
VF610 Dev Board Rev B:

WARNING: CPU: 0 PID: 1 at kernel/dma/remap.c:112 dma_common_free_remap+0x88/0x8c
trying to free invalid coherent area: 9ef82980
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.3.0-rc6-next-20190820 #119
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
Backtrace:
[<8010d1ec>] (dump_backtrace) from [<8010d588>] (show_stack+0x20/0x24)
 r7:8015ed78 r6:00000009 r5:00000000 r4:9f4d9b14
[<8010d568>] (show_stack) from [<8077e3f0>] (dump_stack+0x24/0x28)
[<8077e3cc>] (dump_stack) from [<801197a0>] (__warn.part.3+0xcc/0xe4)
[<801196d4>] (__warn.part.3) from [<80119830>] (warn_slowpath_fmt+0x78/0x94)
 r6:00000070 r5:808e540c r4:81c03048
[<801197bc>] (warn_slowpath_fmt) from [<8015ed78>] (dma_common_free_remap+0x88/0x8c)
 r3:9ef82980 r2:808e53e0
 r7:00001000 r6:a0b1e000 r5:a0b1e000 r4:00001000
[<8015ecf0>] (dma_common_free_remap) from [<8010fa9c>] (remap_allocator_free+0x60/0x68)
 r5:81c03048 r4:9f4d9b78
[<8010fa3c>] (remap_allocator_free) from [<801100d0>] (__arm_dma_free.constprop.3+0xf8/0x148)
 r5:81c03048 r4:9ef82900
[<8010ffd8>] (__arm_dma_free.constprop.3) from [<80110144>] (arm_dma_free+0x24/0x2c)
 r5:9f563410 r4:80110120
[<80110120>] (arm_dma_free) from [<8015d80c>] (dma_free_attrs+0xa0/0xdc)
[<8015d76c>] (dma_free_attrs) from [<8020f3e4>] (dma_pool_destroy+0xc0/0x154)
 r8:9efa8860 r7:808f02f0 r6:808f02d0 r5:9ef82880 r4:9ef82780
[<8020f324>] (dma_pool_destroy) from [<805525d0>] (ehci_mem_cleanup+0x6c/0x150)
 r7:9f563410 r6:9efa8810 r5:00000000 r4:9efd0148
[<80552564>] (ehci_mem_cleanup) from [<80558e0c>] (ehci_stop+0xac/0xc0)
 r5:9efd0148 r4:9efd0000
[<80558d60>] (ehci_stop) from [<8053c4bc>] (usb_remove_hcd+0xf4/0x1b0)
 r7:9f563410 r6:9efd0074 r5:81c03048 r4:9efd0000
[<8053c3c8>] (usb_remove_hcd) from [<8056361c>] (host_stop+0x48/0xb8)
 r7:9f563410 r6:9efd0000 r5:9f5f4040 r4:9f5f5040
[<805635d4>] (host_stop) from [<80563d0c>] (ci_hdrc_host_destroy+0x34/0x38)
 r7:9f563410 r6:9f5f5040 r5:9efa8800 r4:9f5f4040
[<80563cd8>] (ci_hdrc_host_destroy) from [<8055ef18>] (ci_hdrc_remove+0x50/0x10c)
[<8055eec8>] (ci_hdrc_remove) from [<804a2ed8>] (platform_drv_remove+0x34/0x4c)
 r7:9f563410 r6:81c4f99c r5:9efa8810 r4:9efa8810
[<804a2ea4>] (platform_drv_remove) from [<804a18a8>] (device_release_driver_internal+0xec/0x19c)
 r5:00000000 r4:9efa8810
[<804a17bc>] (device_release_driver_internal) from [<804a1978>] (device_release_driver+0x20/0x24)
 r7:9f563410 r6:81c41ed0 r5:9efa8810 r4:9f4a1dac
[<804a1958>] (device_release_driver) from [<804a01b8>] (bus_remove_device+0xdc/0x108)
[<804a00dc>] (bus_remove_device) from [<8049c204>] (device_del+0x150/0x36c)
 r7:9f563410 r6:81c03048 r5:9efa8854 r4:9efa8810
[<8049c0b4>] (device_del) from [<804a3368>] (platform_device_del.part.2+0x20/0x84)
 r10:9f563414 r9:809177e0 r8:81cb07dc r7:81c78320 r6:9f563454 r5:9efa8800
 r4:9efa8800
[<804a3348>] (platform_device_del.part.2) from [<804a3420>] (platform_device_unregister+0x28/0x34)
 r5:9f563400 r4:9efa8800
[<804a33f8>] (platform_device_unregister) from [<8055dce0>] (ci_hdrc_remove_device+0x1c/0x30)
 r5:9f563400 r4:00000001
[<8055dcc4>] (ci_hdrc_remove_device) from [<805652ac>] (ci_hdrc_imx_remove+0x38/0x118)
 r7:81c78320 r6:9f563454 r5:9f563410 r4:9f541010
[<8056538c>] (ci_hdrc_imx_shutdown) from [<804a2970>] (platform_drv_shutdown+0x2c/0x30)
[<804a2944>] (platform_drv_shutdown) from [<8049e4fc>] (device_shutdown+0x158/0x1f0)
[<8049e3a4>] (device_shutdown) from [<8013ac80>] (kernel_restart_prepare+0x44/0x48)
 r10:00000058 r9:9f4d8000 r8:fee1dead r7:379ce700 r6:81c0b280 r5:81c03048
 r4:00000000
[<8013ac3c>] (kernel_restart_prepare) from [<8013ad14>] (kernel_restart+0x1c/0x60)
[<8013acf8>] (kernel_restart) from [<8013af84>] (__do_sys_reboot+0xe0/0x1d8)
 r5:81c03048 r4:00000000
[<8013aea4>] (__do_sys_reboot) from [<8013b0ec>] (sys_reboot+0x18/0x1c)
 r8:80101204 r7:00000058 r6:00000000 r5:00000000 r4:00000000
[<8013b0d4>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54)
Exception stack(0x9f4d9fa8 to 0x9f4d9ff0)
9fa0:                   00000000 00000000 fee1dead 28121969 01234567 379ce700
9fc0: 00000000 00000000 00000000 00000058 00000000 00000000 00000000 00016d04
9fe0: 00028e0c 7ec87c64 000135ec 76c1f410

Restore original invalid input check in dma_common_free_remap() to
avoid this problem.

Fixes: 5cf45379 ("dma-mapping: introduce a dma_common_find_pages helper")
Signed-off-by: default avatarAndrey Smirnov <andrew.smirnov@gmail.com>
[hch: just revert the offending hunk instead of creating a new helper]
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      2cf2aa6a
    • Dmitry Goldin's avatar
      kheaders: make headers archive reproducible · 86cdd2fd
      Dmitry Goldin authored 
      In commit 43d8ce9d ("Provide in-kernel headers to make
extending kernel easier") a new mechanism was introduced, for kernels
>=5.2, which embeds the kernel headers in the kernel image or a module
and exposes them in procfs for use by userland tools.

The archive containing the header files has nondeterminism caused by
header files metadata. This patch normalizes the metadata and utilizes
KBUILD_BUILD_TIMESTAMP if provided and otherwise falls back to the
default behaviour.

In commit f7b101d3 ("kheaders: Move from proc to sysfs") it was
modified to use sysfs and the script for generation of the archive was
renamed to what is being patched.
Signed-off-by: default avatarDmitry Goldin <dgoldin+lkml@protonmail.ch>
Reviewed-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: default avatarJoel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      86cdd2fd
    • Masahiro Yamada's avatar
      kbuild: update compile-test header list for v5.4-rc2 · d188b8c9
      Masahiro Yamada authored 
      Commit 6dc280eb ("coda: remove uapi/linux/coda_psdev.h") removed
a header in question. Some more build errors were fixed. Add more
headers into the test coverage.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      d188b8c9
    • Masahiro Yamada's avatar
      kbuild: two minor updates for Documentation/kbuild/modules.rst · 43496709
      Masahiro Yamada authored 
      Capitalize the first word in the sentence.

Use obj-m instead of obj-y. obj-y still works, but we have no built-in
objects in external module builds. So, obj-m is better IMHO.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      43496709
    • Masahiro Yamada's avatar
      scripts/setlocalversion: clear local variable to make it work for sh · 7a82e3fa
      Masahiro Yamada authored 
      Geert Uytterhoeven reports a strange side-effect of commit 858805b3
("kbuild: add $(BASH) to run scripts with bash-extension"), which
inserts the contents of a localversion file in the build directory twice.

[Steps to Reproduce]
  $ echo bar > localversion
  $ mkdir build
  $ cd build/
  $ echo foo > localversion
  $ make -s -f ../Makefile defconfig include/config/kernel.release
  $ cat include/config/kernel.release
  5.4.0-rc1foofoobar

This comes down to the behavior change of local variables.

The 'man sh' on my Ubuntu machine, where sh is an alias to dash,
explains as follows:
  When a variable is made local, it inherits the initial value and
  exported and readonly flags from the variable with the same name
  in the surrounding scope, if there is one. Otherwise, the variable
  is initially unset.

[Test Code]

  foo ()
  {
          local res
          echo "res: $res"
  }

  res=1
  foo

[Result]

  $ sh test.sh
  res: 1
  $ bash test.sh
  res:

So, scripts/setlocalversion correctly works only for bash in spite of
its hashbang being #!/bin/sh. Nobody had noticed it before because
CONFIG_SHELL was previously set to bash almost all the time.

Now that CONFIG_SHELL is set to sh, we must write portable and correct
code. I gave the Fixes tag to the commit that uncovered the issue.

Clear the variable 'res' in collect_files() to make it work for sh
(and it also works on distributions where sh is an alias to bash).

Fixes: 858805b3 ("kbuild: add $(BASH) to run scripts with bash-extension")
Reported-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
      7a82e3fa
    • Jacob Keller's avatar
      namespace: fix namespace.pl script to support relative paths · 82fdd12b
      Jacob Keller authored 
      The namespace.pl script does not work properly if objtree is not set to
an absolute path. The do_nm function is run from within the find
function, which changes directories.

Because of this, appending objtree, $File::Find::dir, and $source, will
return a path which is not valid from the current directory.

This used to work when objtree was set to an absolute path when using
"make namespacecheck". It appears to have not worked when calling
./scripts/namespace.pl directly.

This behavior was changed in 7e1c0477 ("kbuild: Use relative path
for $(objtree)", 2014-05-14)

Rather than fixing the Makefile to set objtree to an absolute path, just
fix namespace.pl to work when srctree and objtree are relative. Also fix
the script to use an absolute path for these by default.

Use the File::Spec module for this purpose. It's been part of perl
5 since 5.005.

The curdir() function is used to get the current directory when the
objtree and srctree aren't set in the environment.

rel2abs() is used to convert possibly relative objtree and srctree
environment variables to absolute paths.

Finally, the catfile() function is used instead of string appending
paths together, since this is more robust when joining paths together.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Acked-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Tested-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      82fdd12b
    • Masahiro Yamada's avatar
      video/logo: do not generate unneeded logo C files · 01bb2515
      Masahiro Yamada authored 
      Currently, all the logo C files are generated irrespective of the
CONFIG options. Adding them to extra-y is wrong. What we need to do
here is to add them to 'targets' so that if_changed works properly.

Files listed in 'targets' are cleaned, so clean-files is unneeded.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      01bb2515
    • Masahiro Yamada's avatar
      video/logo: remove unneeded *.o pattern from clean-files · a9bbe79f
      Masahiro Yamada authored 
      The pattern *.o is cleaned up globally by the top Makefile.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      a9bbe79f
    • Masahiro Yamada's avatar
      integrity: remove pointless subdir-$(CONFIG_...) · 7a8beb7a
      Masahiro Yamada authored 
      The ima/ and evm/ sub-directories contain built-in objects, so
obj-$(CONFIG_...) is the correct way to descend into them.

subdir-$(CONFIG_...) is redundant.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      7a8beb7a
    • Masahiro Yamada's avatar
      integrity: remove unneeded, broken attempt to add -fshort-wchar · 6b190d3c
      Masahiro Yamada authored 
      I guess commit 15ea0e1e ("efi: Import certificates from UEFI Secure
Boot") attempted to add -fshort-wchar for building load_uefi.o, but it
has never worked as intended.

load_uefi.o is created in the platform_certs/ sub-directory. If you
really want to add -fshort-wchar, the correct code is:

  $(obj)/platform_certs/load_uefi.o: KBUILD_CFLAGS += -fshort-wchar

But, you do not need to fix it.

Commit 8c97023c ("Kbuild: use -fshort-wchar globally") had already
added -fshort-wchar globally. This code was unneeded in the first place.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      6b190d3c
    • Jakub Kicinski's avatar
      selftests/net: add nettest to .gitignore · ef129d34
      Jakub Kicinski authored 
      nettest is missing from gitignore.

Fixes: acda655f ("selftests: Add nettest")
Signed-off-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ef129d34
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7