Current driver checks if input bitstream file size is aligned or
not per PR data width (default 32bits). It requires one additional
step for end user when they generate the bitstream file, padding
extra zeros to bitstream file to align its size per PR data width,
but they don't have to as hardware will drop extra padding bytes
automatically.

In order to simplify the user steps, this patch aligns PR buffer
size per PR data width in driver, to allow user to pass unaligned
size bitstream files to driver.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20190628004951.6202-4-mdf@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes copy_to_user() code in partial reconfiguration
ioctl, as it's useless as user never needs to read the data
structure after ioctl.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20190628004951.6202-3-mdf@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

FME_PR_INTFC_ID is used as compat_id for fpga manager and region,
but high 64 bits and low 64 bits of the compat_id are swapped by
mistake. This patch fixes this problem by fixing register address.
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20190628004951.6202-2-mdf@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In multi-window mode, the read iterator is supposed to start from the
window with the oldest data, which is, chronologically, the next window
after the one with the newest data. This, however, fails to take into
account the potentially empty windows, so in short trace sessions it's
possible to have a lot of zeroes read from the character device first.

Fix this by skipping over the empty windows in initialization of the
read iterator.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190627125152.54905-5-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To allow the use of externally allocated SG tables further down the line,
change the code to reference the table via a pointer and make it point to
the locally allocated table by default.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190627125152.54905-4-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the MSU is using scatterlist, we can support multipage blocks.
At the moment, the code assumes that all blocks are page-sized, but in
larger buffers it may make sense to chunk together larger blocks of
memory. One place where one-to-many relationship needs to be handled is
the MSU buffer's mmap path.

Get rid of the implicit assumption that all blocks are page-sized.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190627125152.54905-3-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds Ice Lake NNPI support to the Intel(R) Trace Hub.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190621161930.60785-5-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 4e0eaf23 ("intel_th: msu: Fix single mode with IOMMU") switched
the single mode code to use dma mapping pages obtained from the page
allocator, but with IOMMU disabled, that may lead to using SWIOTLB bounce
buffers and without additional sync'ing, produces empty trace buffers.

Fix this by using a DMA32 GFP flag to the page allocation in single mode,
as the device supports full 32-bit DMA addressing.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: 4e0eaf23 ("intel_th: msu: Fix single mode with IOMMU")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Ammy Yi <ammy.yi@intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190621161930.60785-4-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit aad14ad3 ("intel_th: msu: Add current window tracking") added
the following gcc warning:

> drivers/hwtracing/intel_th/msu.c: In function msc_win_switch:
> drivers/hwtracing/intel_th/msu.c:1389:21: warning: variable last set but
> not used [-Wunused-but-set-variable]

Fix it by removing the variable.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Fixes: aad14ad3 ("intel_th: msu: Add current window tracking")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190621161930.60785-3-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit ba39bd83 ("intel_th: msu: Switch over to scatterlist")
introduced the following warnings on non-x86 architectures, as a result
of reordering the multi mode buffer allocation sequence:

> drivers/hwtracing/intel_th/msu.c: In function ‘msc_buffer_win_alloc’:
> drivers/hwtracing/intel_th/msu.c:783:21: warning: unused variable ‘i’
> [-Wunused-variable]
> int ret = -ENOMEM, i;
>                    ^
> drivers/hwtracing/intel_th/msu.c: In function ‘msc_buffer_win_free’:
> drivers/hwtracing/intel_th/msu.c:863:6: warning: unused variable ‘i’
> [-Wunused-variable]
> int i;
>     ^

Fix this compiler warning by factoring out set_memory sequences and making
them x86-only.
Suggested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Fixes: ba39bd83 ("intel_th: msu: Switch over to scatterlist")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190621161930.60785-2-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The FSA9480 has a new driver more appropriately located
in the drivers/extcon subsystem. It is also more complete
and includes device tree support. Delete the old misc
driver.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Pawe Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://lore.kernel.org/r/20190630140302.16245-1-linus.walleij@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'fsi-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next

Joel writes:

FSI changes for 5.3

 - Add MAINTAINERS entry. There is now a git tree and a mailing
 list/patchwork for collecting FSI patches

 - Bug fix for error driver registration error paths

 - Correction for the OCC hwmon driver to meet the spec

* tag 'fsi-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi:
  fsi/core: Fix error paths on CFAM init
  OCC: FSI and hwmon: Add sequence numbering
  MAINTAINERS: Add FSI subsystem

Change d1dcd678 re-worked the struct fsi_slave initialisation in
fsi_slave_init, but introduced a few inconsitencies: the slave->dev is
now registered through cdev_device_add, but we may kfree() the device
out from underneath the cdev registration. We may also leave an IDA
allocated.

This change fixes the error paths, so that we kfree() only before the
device is registered with the core code. We also move the smode write to
before we start creating proper devices, as it's the most likely to
fail. We also remove the IDA-allocated minor on error, and properly
clean up the of_node.

Fixes: d1dcd678 ("fsi: Add cfam char devices")
Reported-by: Lei YU <mine260309@gmail.com>
Tested-by: John Wang <wangzqbj@inspur.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Sequence numbering of the commands submitted to the OCC is required by
the OCC interface specification. Add sequence numbering and check for
the correct sequence number on the response.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

The subsystem was merged some time ago but we did not have a maintainers
entry. The mailing list exists to allow our patchwork to slurp up the
patches. The tree will be co-maintained by myself and Jeremy.
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Merge tag 'extcon-next-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for 5.3

Detailed description for this pull request:
1. Add new extcon-fsa9480 extcon provider driver
- It is extcon provide driver for Fairchild Semiconductor
FSA9480 microUSB switch and accessory detector chip which
detects the kind of external connector like usb, charger,
audio, video and so on.

2.
- Add the exception handling code for extcon-arizona.c
when using the regmap interface.

* tag 'extcon-next-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: fsa9480: Fix Kconfig warning and build errors
  extcon: Add fsa9480 extcon driver
  dt-bindings: extcon: Add support for fsa9480 switch
  extcon: arizona: Correct error handling on regmap_update_bits_check

The buffer copy functions assumed the caller would ensure
correct alignment and that the memory to be copied was
completely within the binder buffer. There have been
a few cases discovered by syzkallar where a malformed
transaction created by a user could violated the
assumptions and resulted in a BUG_ON.

The fix is to remove the BUG_ON and always return the
error to be handled appropriately by the caller.
Acked-by: Martijn Coenen <maco@android.com>
Reported-by: syzbot+3ae18325f96190606754@syzkaller.appspotmail.com
Fixes: bde4a19f ("binder: use userspace pointer as base of buffer space")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add compatible for i.MX8MM as per arch/arm64/boot/dts/freescale/imx8mm.dtsi
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

According to NXP Reference Manuals and uboot/atf sources the OCOTP block
on imx8m behaves more like imx6 than imx7.

- Fuses can be read/written 32bits at a time (no imx7-like banking)
- The OCOTP_HW_OCOTP_TIMING register is like imx6 not imx7

Since nvmem doesn't support uboot-style "sense" and "override" this
issue only affected "write" which is very rarely used.

Fixes: 163c0dbd0cb1 ("nvmem: imx-ocotp: add support for imx8mq")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds support to burn the fuses on the i.MX8MM.
https://www.nxp.com/webapp/Download?colCode=IMX8MMRM

The i.MX8MM is similar to i.MX6 processors in terms of addressing and clock
setup.

The documentation specifies 60 discreet OTP registers but, the fusemap
address space encompasses up to 256 registers. We map the entire putative
256 OTP registers.
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The RELAX field of the OCOTP block is turning out as a zero on i.MX8MM.
This messes up the subsequent re-load of the fuse shadow registers.

After some discussion with people @ NXP its clear we have missed a trick
here in Linux.

The OCOTP fuse programming time has a physical minimum 'burn time' that is
not related to the ipg_clk.

We need to define the RELAX, STROBE_READ and STROBE_PROG fields in terms of
desired timings to allow for the burn-in to safely complete. Right now only
the RELAX field is calculated in terms of an absolute time and we are
ending up with a value of zero.

This patch inherits the u-boot timings for the OCOTP_TIMING calculation on
the i.MX6 and i.MX8. Those timings are known to work and critically specify
values such as STROBE_PROG as a minimum timing.

Fixes: 0642bac7 ("nvmem: imx-ocotp: add write support")
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Suggested-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The i.MX6 and i.MX8 both have a bit-field spanning bits 27:22 called the
WAIT field.

The WAIT field according to the documentation for both parts "specifies
time interval between auto read and write access in one time program. It is
given in number of ipg_clk periods."

This patch ensures that the relevant field is read and written back to the
timing register.

Fixes: 0642bac7 ("nvmem: imx-ocotp: add write support")
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i.MX6 defines OCOTP_CTRLn:ADDR as seven bit address-field with a one bit
RSVD0 field, i.MX7 defines OCOTP_CTRLn:ADDR as a four bit address-field
with a four bit RSVD0 field.

i.MX8 defines the OCOTP_CTRLn:ADDR bit-field as a full range eight bits.

i.MX6 and i.MX7 should return zero for their respective RSVD0 bits and
ignore a write-back of zero where i.MX8 will make use of the full range.

This patch expands the bit-field definition for all users to eight bits,
which is safe due to RSVD0 being a no-op for the i.MX6 and i.MX7.
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix Kconfig dependency warning and subsequent build errors caused by
the Kconfig entry for EXTCON-FSA9480.  It should not select
REGMAP_I2C unless I2C is already set/enabled.

WARNING: unmet direct dependencies detected for REGMAP_I2C
  Depends on [n]: I2C [=n]
  Selected by [y]:
  - EXTCON_FSA9480 [=y] && EXTCON [=y] && INPUT [=y]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[cw00.choi: adjust the patch title and remove the long warning messages]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds an x86-specific test for pinned cr4 bits. A successful test
will validate pinning and check the ROP-style call-middle-of-function
defense, if needed. For example, in the case of native_write_cr4()
looking like this:

ffffffff8171bce0 <native_write_cr4>:
ffffffff8171bce0:       48 8b 35 79 46 f2 00    mov    0xf24679(%rip),%rsi
ffffffff8171bce7:       48 09 f7                or     %rsi,%rdi
ffffffff8171bcea:       0f 22 e7                mov    %rdi,%cr4
...
ffffffff8171bd5a:       c3                      retq

The UNSET_SMEP test will jump to ffffffff8171bcea (the mov to cr4)
instead of ffffffff8171bce0 (native_write_cr4() entry) to simulate a
direct-call bypass attempt.

Expected successful results:

  # echo UNSET_SMEP > /sys/kernel/debug/provoke-crash/DIRECT
  # dmesg
  [   79.594433] lkdtm: Performing direct entry UNSET_SMEP
  [   79.596459] lkdtm: trying to clear SMEP normally
  [   79.598406] lkdtm: ok: SMEP did not get cleared
  [   79.599981] lkdtm: trying to clear SMEP with call gadget
  [   79.601810] ------------[ cut here ]------------
  [   79.603421] Attempt to unpin cr4 bits: 100000; bypass attack?!
  ...
  [   79.650170] ---[ end trace 2452ca0f6126242e ]---
  [   79.650937] lkdtm: ok: SMEP removal was reverted
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull iommu fix from Joerg Roedel:
 "Revert a commit from the previous pile of fixes which causes new
  lockdep splats. It is better to revert it for now and work on a better
  and more well tested fix"

* tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"

This reverts commit 7560cc3c.

With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt:

    ======================================================
    WARNING: possible circular locking dependency detected
    5.2.0-rc5 #78 Not tainted
    ------------------------------------------------------
    swapper/0/1 is trying to acquire lock:
    00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0
    but task is already holding lock:
    00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0
    which lock already depends on the new lock.
    the existing dependency chain (in reverse order) is:
    -> #1 (device_domain_lock){....}:
           _raw_spin_lock_irqsave+0x3c/0x50
           dmar_insert_one_dev_info+0xbb/0x510
           domain_add_dev_info+0x50/0x90
           dev_prepare_static_identity_mapping+0x30/0x68
           intel_iommu_init+0xddd/0x1422
           pci_iommu_init+0x16/0x3f
           do_one_initcall+0x5d/0x2b4
           kernel_init_freeable+0x218/0x2c1
           kernel_init+0xa/0x100
           ret_from_fork+0x3a/0x50
    -> #0 (&(&iommu->lock)->rlock){+.+.}:
           lock_acquire+0x9e/0x170
           _raw_spin_lock+0x25/0x30
           domain_context_mapping_one+0xa5/0x4e0
           pci_for_each_dma_alias+0x30/0x140
           dmar_insert_one_dev_info+0x3b2/0x510
           domain_add_dev_info+0x50/0x90
           dev_prepare_static_identity_mapping+0x30/0x68
           intel_iommu_init+0xddd/0x1422
           pci_iommu_init+0x16/0x3f
           do_one_initcall+0x5d/0x2b4
           kernel_init_freeable+0x218/0x2c1
           kernel_init+0xa/0x100
           ret_from_fork+0x3a/0x50

    other info that might help us debug this:
     Possible unsafe locking scenario:
           CPU0                    CPU1
           ----                    ----
      lock(device_domain_lock);
                                   lock(&(&iommu->lock)->rlock);
                                   lock(device_domain_lock);
      lock(&(&iommu->lock)->rlock);

     *** DEADLOCK ***
    2 locks held by swapper/0/1:
     #0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422
     #1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0

    stack backtrace:
    CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5 #78
    Hardware name: LENOVO 20KGS35G01/20KGS35G01, BIOS N23ET50W (1.25 ) 06/25/2018
    Call Trace:
     dump_stack+0x85/0xc0
     print_circular_bug.cold.57+0x15c/0x195
     __lock_acquire+0x152a/0x1710
     lock_acquire+0x9e/0x170
     ? domain_context_mapping_one+0xa5/0x4e0
     _raw_spin_lock+0x25/0x30
     ? domain_context_mapping_one+0xa5/0x4e0
     domain_context_mapping_one+0xa5/0x4e0
     ? domain_context_mapping_one+0x4e0/0x4e0
     pci_for_each_dma_alias+0x30/0x140
     dmar_insert_one_dev_info+0x3b2/0x510
     domain_add_dev_info+0x50/0x90
     dev_prepare_static_identity_mapping+0x30/0x68
     intel_iommu_init+0xddd/0x1422
     ? printk+0x58/0x6f
     ? lockdep_hardirqs_on+0xf0/0x180
     ? do_early_param+0x8e/0x8e
     ? e820__memblock_setup+0x63/0x63
     pci_iommu_init+0x16/0x3f
     do_one_initcall+0x5d/0x2b4
     ? do_early_param+0x8e/0x8e
     ? rcu_read_lock_sched_held+0x55/0x60
     ? do_early_param+0x8e/0x8e
     kernel_init_freeable+0x218/0x2c1
     ? rest_init+0x230/0x230
     kernel_init+0xa/0x100
     ret_from_fork+0x3a/0x50

domain_context_mapping_one() is taking device_domain_lock first then
iommu lock, while dmar_insert_one_dev_info() is doing the reverse.

That should be introduced by commit:

7560cc3c ("iommu/vt-d: Fix lock inversion between iommu->lock and
              device_domain_lock", 2019-05-27)

So far I still cannot figure out how the previous deadlock was
triggered (I cannot find iommu lock taken before calling of
iommu_flush_dev_iotlb()), however I'm pretty sure that that change
should be incomplete at least because it does not fix all the places
so we're still taking the locks in different orders, while reverting
that commit is very clean to me so far that we should always take
device_domain_lock first then the iommu lock.

We can continue to try to find the real culprit mentioned in
7560cc3c, but for now I think we should revert it to fix current
breakage.

CC: Joerg Roedel <joro@8bytes.org>
CC: Lu Baolu <baolu.lu@linux.intel.com>
CC: dave.jiang@intel.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Pull PCI fix from Bjorn Helgaas:
 "If an IOMMU is present, ignore the P2PDMA whitelist we added for v5.2
  because we don't yet know how to support P2PDMA in that case (Logan
  Gunthorpe)"

* tag 'pci-v5.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present

Pull SCSI fixes from James Bottomley:
 "Three driver fixes (and one version number update): a suspend hang in
  ufs, a qla hard lock on module removal and a qedi panic during
  discovery"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix hardlockup in abort command during driver remove
  scsi: ufs: Avoid runtime suspend possibly being blocked forever
  scsi: qedi: update driver version to 8.37.0.20
  scsi: qedi: Check targetname while finding boot target information

Pull powerpc fixes from Michael Ellerman:
 "This is a frustratingly large batch at rc5. Some of these were sent
  earlier but were missed by me due to being distracted by other things,
  and some took a while to track down due to needing manual bisection on
  old hardware. But still we clearly need to improve our testing of KVM,
  and of 32-bit, so that we catch these earlier.

  Summary: seven fixes, all for bugs introduced this cycle.

   - The commit to add KASAN support broke booting on 32-bit SMP
     machines, due to a refactoring that moved some setup out of the
     secondary CPU path.

   - A fix for another 32-bit SMP bug introduced by the fast syscall
     entry implementation for 32-bit BOOKE. And a build fix for the same
     commit.

   - Our change to allow the DAWR to be force enabled on Power9
     introduced a bug in KVM, where we clobber r3 leading to a host
     crash.

   - The same commit also exposed a previously unreachable bug in the
     nested KVM handling of DAWR, which could lead to an oops in a
     nested host.

   - One of the DMA reworks broke the b43legacy WiFi driver on some
     people's powermacs, fix it by enabling a 30-bit ZONE_DMA on 32-bit.

   - A fix for TLB flushing in KVM introduced a new bug, as it neglected
     to also flush the ERAT, this could lead to memory corruption in the
     guest.

  Thanks to: Aaro Koskinen, Christoph Hellwig, Christophe Leroy, Larry
  Finger, Michael Neuling, Suraj Jitindar Singh"

* tag 'powerpc-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries
  powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac
  KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real mode
  KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr()
  powerpc/32: fix build failure on book3e with KVM
  powerpc/booke: fix fast syscall entry on SMP
  powerpc/32s: fix initial setup of segment registers on secondary CPU

When trying to align the minimum encryption key size requirement for
Bluetooth connections, it turns out doing this in a central location in
the HCI connection handling code is not possible.

Original Bluetooth version up to 2.0 used a security model where the
L2CAP service would enforce authentication and encryption.  Starting
with Bluetooth 2.1 and Secure Simple Pairing that model has changed into
that the connection initiator is responsible for providing an encrypted
ACL link before any L2CAP communication can happen.

Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and
before devices are causing a regression.  The encryption key size check
needs to be moved out of the HCI connection handling into the L2CAP
channel setup.

To achieve this, the current check inside hci_conn_security() has been
moved into l2cap_check_enc_key_size() helper function and then called
from four decisions point inside L2CAP to cover all combinations of
Secure Simple Pairing enabled devices and device using legacy pairing
and legacy service security model.

Fixes: d5bb334a ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch adds extcon driver for Fairchild Semiconductor FSA9480
microUSB switch.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

This patch adds documentation for binding of extcont Fairchild
Semiconductor FSA9480 microusb switch.
This usb port accessory detector and switch, can be found for example in
some Samsung s5pv210 based phones.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

syzkallar found a 32-byte memory leak in a rarely executed error
case. The transaction complete work item was not freed if put_user()
failed when writing the BR_TRANSACTION_COMPLETE to the user command
buffer. Fixed by freeing it before put_user() is called.

Reported-by: syzbot+182ce46596c3f2e1eb24@syzkaller.appspotmail.com
Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull networking fixes from David Miller:

 1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume
    Nault.

 2) Don't access the DDM interface unless the transceiver implements it
    in bnx2x, from Mauro S. M. Rodrigues.

 3) Don't double fetch 'len' from userspace in sock_getsockopt(), from
    JingYi Hou.

 4) Sign extension overflow in lio_core, from Colin Ian King.

 5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski.

 6) Fix epollout hang in hvsock, from Sunil Muthuswamy.

 7) Fix regression in default fib6_type, from David Ahern.

 8) Handle memory limits in tcp_fragment more appropriately, from Eric
    Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
  tcp: refine memory limit test in tcp_fragment()
  inet: clear num_timeout reqsk_alloc()
  net: mvpp2: debugfs: Add pmap to fs dump
  ipv6: Default fib6_type to RTN_UNICAST when not set
  net: hns3: Fix inconsistent indenting
  net/af_iucv: always register net_device notifier
  net/af_iucv: build proper skbs for HiperTransport
  net/af_iucv: remove GFP_DMA restriction for HiperTransport
  net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
  hvsock: fix epollout hang from race condition
  net/udp_gso: Allow TX timestamp with UDP GSO
  net: netem: fix use after free and double free with packet corruption
  net: netem: fix backlog accounting for corrupted GSO frames
  net: lio_core: fix potential sign-extension overflow on large shift
  tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
  ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
  ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
  tun: wake up waitqueues after IFF_UP is set
  net: remove duplicate fetch in sock_getsockopt
  tipc: fix issues with early FAILOVER_MSG from peer
  ...

tcp_fragment() might be called for skbs in the write queue.

Memory limits might have been exceeded because tcp_sendmsg() only
checks limits at full skb (64KB) boundaries.

Therefore, we need to make sure tcp_fragment() wont punish applications
that might have setup very low SO_SNDBUF values.

Fixes: f070ef2a ("tcp: tcp_fragment() should apply sane memory limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull rdma fixes from Doug Ledford:
 "This is probably our last -rc pull request. We don't have anything
  else outstanding at the moment anyway, and with the summer months on
  us and people taking trips, I expect the next weeks leading up to the
  merge window to be pretty calm and sedate.

  This has two simple, no brainer fixes for the EFA driver.

  Then it has ten not quite so simple fixes for the hfi1 driver. The
  problem with them is that they aren't simply one liner typo fixes.
  They're still fixes, but they're more complex issues like livelock
  under heavy load where the answer was to change work queue usage and
  spinlock usage to resolve the problem, or issues with orphaned
  requests during certain types of failures like link down which
  required some more complex work to fix too. They all look like
  legitimate fixes to me, they just aren't small like I wish they were.

  Summary:

   - 2 minor EFA fixes

   - 10 hfi1 fixes related to scaling issues"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/efa: Handle mmap insertions overflow
  RDMA/efa: Fix success return value in case of error
  IB/hfi1: Handle port down properly in pio
  IB/hfi1: Handle wakeup of orphaned QPs for pio
  IB/hfi1: Wakeup QPs orphaned on wait list after flush
  IB/hfi1: Use aborts to trigger RC throttling
  IB/hfi1: Create inline to get extended headers
  IB/hfi1: Silence txreq allocation warnings
  IB/hfi1: Avoid hardlockup with flushlist_lock
  IB/hfi1: Correct tid qp rcd to match verbs context
  IB/hfi1: Close PSM sdma_progress sleep window
  IB/hfi1: Validate fault injection opcode user input

Pull more NFS client fixes from Anna Schumaker:
 "These are mostly refcounting issues that people have found recently.
  The revert fixes a suspend recovery performance issue.

   - SUNRPC: Fix a credential refcount leak

   - Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"

   - SUNRPC: Fix xps refcount imbalance on the error path

   - NFS4: Only set creation opendata if O_CREAT"

* tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  SUNRPC: Fix a credential refcount leak
  Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
  net :sunrpc :clnt :Fix xps refcount imbalance on the error path
  NFS4: Only set creation opendata if O_CREAT