- 13 Nov, 2023 37 commits
-
-
Mark Brown authored
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>: Instead of using MODULE_ALIAS() to load boards, add proper device id table and use MODULE_DEVICE_TABLE() macro to create board alias.
-
Mark Brown authored
Merge series from Trevor Wu <trevor.wu@mediatek.com>: There are some variables that are no longer being used because they were declared for the deprecated memory layout. Currently, these code sections confuse the users. Therefore, this series removes the code that was implemented for those variables.
-
Mark Brown authored
Merge series from Seven Lee <wtli@nuvoton.com>: Determine DMIC slew rate via property setup. Change: V3 -> V4: - add "maximum: 7" description. V2 -> V3: - Update description of DMIC slew rate and remove "selection" key words from property name - Corrected variable name of DMIC slew rate from c file V1 -> V2: - Corrected description of DMIC slew rate. Seven Lee (2): ASoC: dt-bindings: nau8821: Add DMIC slew rate. ASoC: nau8821: Add slew rate controls. .../devicetree/bindings/sound/nuvoton,nau8821.yaml | 9 +++++++++ sound/soc/codecs/nau8821.c | 7 +++++++ sound/soc/codecs/nau8821.h | 3 +++ 3 files changed, 19 insertions(+) -- 2.25.1
-
Dan Carpenter authored
The list iterator in a list_for_each_entry() loop can never be NULL. Remove the check and pull the code in a tab. Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/e376a712-e0c6-446f-9e0b-c444dd795cbb@moroto.mountainSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Krzysztof Kozlowski authored
Soundwire Devicetree bindings expect the Soundwire controller device node to be named just "soundwire". Correct examples, so the incorrect code will not be re-used. Reported-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231107101610.13728-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Add sound card for SM8550, which as of now looks fully compatible with SM8450. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231106180422.170492-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Sebastian Reichel authored
Convert the binding to DT schema format. Note, that "IPVDD-supply" got fixed to be "HPVDD-supply" during the conversion. This was obviously a typo in the old binding. The old binding example, DT files, chip datasheet and Linux driver use HPVDD. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by:
-
Weidong Wang authored
Modify the aw88395_lib file so that the bin file parsing is no longer related to the chip id of the chip. Adopt the bin file data type "prof_data_type" as the differentiation between different chip bin file parsing methods. Since the chip id macro for the aw88399 is no longer defined in aw88395_reg.h, define the chip id for the aw88399 in aw88399.h Signed-off-by:
Weidong Wang <wangweidong.a@awinic.com> Link: https://lore.kernel.org/r/20231109093708.13155-1-wangweidong.a@awinic.comSigned-off-by:
-
Christophe JAILLET authored
dma_request_slave_channel() is deprecated. dma_request_chan() should be used directly instead. Switch to the preferred function and update the error handling accordingly. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/b78685e4103f12931ddb09c1654bc6b04b640868.1699724240.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Rob Herring authored
The use of 'definitions' is not necessary and also problematic because the dtschema tools don't process 'definitions' resulting in this spurious warning: Documentation/devicetree/bindings/sound/renesas,rsnd.example.dtb: sound@ec500000: port:endpoint: Unevaluated properties are not allowed ('phandle' was unexpected) from schema $id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml# Fix this by moving the port schema to #/properties/port and referencing that directly from the 'ports' schema. Really, a binding should just always use 'ports' if multiple ports are possible. There's no benefit to supporting both forms. However, it appears there are already lots of users of this one with a single 'port' node. Signed-off-by: -
Syed Saba Kareem authored
Correct the formats order for dai driver structures. Signed-off-by:
Syed Saba Kareem <Syed.SabaKareem@amd.com> Link: https://lore.kernel.org/r/20231031135949.1064581-2-Syed.SabaKareem@amd.comSigned-off-by:
-
Syed Saba Kareem authored
Fix indentation issue reported in acp70_pcm_resume() function. Fixes: e84db124 (ASoC: amd: acp: Add pci legacy driver support for acp7.0 platform") Signed-off-by:
-
Amadeusz Sławiński authored
New DAPM widgets are created based on a provided template. When cloning the data, the name and stream name also need to be cloned. Currently the data and the names are initialized in different places. Simplify the code by having entire initialization in one place. Reviewed-by:
Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231026113549.1897368-1-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Keguang Zhang authored
The sti-uniperf pcm_config is the same as the default pcm_config. Since commit 43556516 ("ASoC: soc-generic-dmaengine-pcm: Use default config when none is given"), passing a NULL pointer could let this driver use the default config. Signed-off-by:
Keguang Zhang <keguang.zhang@gmail.com> Link: https://lore.kernel.org/r/20231106-sti-uniperf-v1-1-b2d8749cfa2e@gmail.comSigned-off-by:
-
Trevor Wu authored
To prevent confusion on the follow-up platform, it is necessary to remove any unused variables within the struct mtk_adsp_chip_info. Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Reviewed-by:
Yaochun Hung <yc.hung@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20231103095433.10475-4-trevor.wu@mediatek.comSigned-off-by:
-
Trevor Wu authored
Since there are some variables that are no longer being used, we remove the code that was implemented for those variables. Signed-off-by:
-
Trevor Wu authored
Since there are some variables that are no longer being used, we remove the code that was implemented for those variables. Signed-off-by:
-
Seven Lee authored
The patch supports DMIC clock slew rate controls. Signed-off-by:
Seven Lee <wtli@nuvoton.com> Link: https://lore.kernel.org/r/20231107035230.1241683-3-wtli@nuvoton.comSigned-off-by:
-
Seven Lee authored
Add input with DMIC slew rate controls. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231107035230.1241683-2-wtli@nuvoton.comSigned-off-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Amadeusz Sławiński authored
Add id_table and use it instead of alias to load module. Suggested-by:
-
Linus Torvalds authored
-
- 12 Nov, 2023 3 commits
-
-
Miri Korenblit authored
The commands should be sorted inside the group definition. Fix the ordering so we won't get following warning: WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)) Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/ Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/ Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics") Tested-by:
Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by:
Damian Tometzki <damian@riscv-rocks.de> Acked-by:
Kalle Valo <kvalo@kernel.org> Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Include the upper 5 address bits when inserting TLB entries on a 64-bit kernel. On physical machines those are ignored, but in qemu it's nice to have them included and to be correct. - Stop the 64-bit kernel and show a warning if someone tries to boot on a machine with a 32-bit CPU - Fix a "no previous prototype" warning in parport-gsc * tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent booting 64-bit kernels on PA1.x machines parport: gsc: mark init function static parisc/pgtable: Do not drop upper 5 address bits of physical address
-
Linus Torvalds authored
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - support PREEMPT_DYNAMIC with static keys - relax memory ordering for atomic operations - support BPF CPU v4 instructions for LoongArch - some build and runtime warning fixes * tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: selftests/bpf: Enable cpu v4 tests for LoongArch LoongArch: BPF: Support signed mod instructions LoongArch: BPF: Support signed div instructions LoongArch: BPF: Support 32-bit offset jmp instructions LoongArch: BPF: Support unconditional bswap instructions LoongArch: BPF: Support sign-extension mov instructions LoongArch: BPF: Support sign-extension load instructions LoongArch: Add more instruction opcodes and emit_* helpers LoongArch/smp: Call rcutree_report_cpu_starting() earlier LoongArch: Relax memory ordering for atomic operations LoongArch: Mark __percpu functions as always inline LoongArch: Disable module from accessing external data directly LoongArch: Support PREEMPT_DYNAMIC with static keys
-
