- 10 Mar, 2023 4 commits
-
-
Florian Westphal authored
No users in the tree. Tested with allmodconfig build. Signed-off-by:
Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20230308142006.20879-1-fw@strlen.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Nick Alcock authored
Since commit 8b41fc44 ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by:
Nick Alcock <nick.alcock@oracle.com> Suggested-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230308121230.5354-1-nick.alcock@oracle.comSigned-off-by:
-
Nick Alcock authored
Since commit 8b41fc44 ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Documentation/bpf/bpf_devel_QA.rst b7abcd9c ("bpf, doc: Link to submitting-patches.rst for general patch submission info") d56b0c46 ("bpf, docs: Fix link to netdev-FAQ target") https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/Signed-off-by:
-
- 09 Mar, 2023 36 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from netfilter and bpf. Current release - regressions: - core: avoid skb end_offset change in __skb_unclone_keeptruesize() - sched: - act_connmark: handle errno on tcf_idr_check_alloc - flower: fix fl_change() error recovery path - ieee802154: prevent user from crashing the host Current release - new code bugs: - eth: bnxt_en: fix the double free during device removal - tools: ynl: - fix enum-as-flags in the generic CLI - fully inherit attrs in subsets - re-license uniformly under GPL-2.0 or BSD-3-clause Previous releases - regressions: - core: use indirect calls helpers for sk_exit_memory_pressure() - tls: - fix return value for async crypto - avoid hanging tasks on the tx_lock - eth: ice: copy last block omitted in ice_get_module_eeprom() Previous releases - always broken: - core: avoid double iput when sock_alloc_file fails - af_unix: fix struct pid leaks in OOB support - tls: - fix possible race condition - fix device-offloaded sendpage straddling records - bpf: - sockmap: fix an infinite loop error - test_run: fix &xdp_frame misplacement for LIVE_FRAMES - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR - netfilter: tproxy: fix deadlock due to missing BH disable - phylib: get rid of unnecessary locking - eth: bgmac: fix *initial* chip reset to support BCM5358 - eth: nfp: fix csum for ipsec offload - eth: mtk_eth_soc: fix RX data corruption issue Misc: - usb: qmi_wwan: add telit 0x1080 composition" * tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) tools: ynl: fix enum-as-flags in the generic CLI tools: ynl: move the enum classes to shared code net: avoid double iput when sock_alloc_file fails af_unix: fix struct pid leaks in OOB support eth: fealnx: bring back this old driver net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC net: microchip: sparx5: fix deletion of existing DSCP mappings octeontx2-af: Unlock contexts in the queue context cache in case of fault detection net/smc: fix fallback failed while sendmsg with fastopen ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause mailmap: update entries for Stephen Hemminger mailmap: add entry for Maxim Mikityanskiy nfc: change order inside nfc_se_io error path ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation net: usb: qmi_wwan: add Telit 0x1080 composition net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990 netfilter: conntrack: adopt safer max chain length net: tls: fix device-offloaded sendpage straddling records ... -
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Benjamin Tissoires: - fix potential out of bound write of zeroes in HID core with a specially crafted uhid device (Lee Jones) - fix potential use-after-free in work function in intel-ish-hid (Reka Norman) - selftests config fixes (Benjamin Tissoires) - few device small fixes and support * tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: intel-ish-hid: ipc: Fix potential use-after-free in work function HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded selftest: hid: fix hid_bpf not set in config HID: uhid: Over-ride the default maximum data buffer value with our own HID: core: Provide new max_buffer_size attribute to over-ride the default
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k fixes from Geert Uytterhoeven: - Fix systems with memory at end of 32-bit address space - Fix initrd on systems where memory does not start at address zero - Fix 68030 handling of bus errors for addresses in exception tables * tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Only force 030 bus error if PC not in exception table m68k: mm: Move initrd phys_to_virt handling after paging_init() m68k: mm: Fix systems with memory at end of 32-bit address space
-
Al Viro authored
We fetch %SR value from sigframe; it might have been modified by signal handler, so we can't trust it with any bits that are not modifiable in user mode. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Rich Felker <dalias@libc.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queuePaolo Abeni authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-07 (ice) This series contains updates to ice driver only. Dave removes masking from pfcena field as it was incorrectly preventing valid traffic classes from being enabled. Michal resolves various smatch issues such as not propagating error codes and returning 0 explicitly. Arnd Bergmann resolves gcc-9 warning for integer overflow. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation ==================== Link: https://lore.kernel.org/r/20230307220714.3997294-1-anthony.l.nguyen@intel.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Xin Long says: ==================== sctp: add another two stream schedulers All SCTP stream schedulers are defined in rfc8260#section-3, First-Come First-Served, Round-Robin and Priority-Based Schedulers are already added in kernel. This patchset adds another two schedulers: Fair Capacity Scheduler and Weighted Fair Queueing Scheduler. Note that the left one "Round-Robin Scheduler per Packet" Scheduler is not implemented by this patch, as it's still intrusive to be added in the current SCTP kernel code. ==================== Link: https://lore.kernel.org/r/cover.1678224012.git.lucien.xin@gmail.comSigned-off-by:
-
Xin Long authored
As it says in rfc8260#section-3.6 about the weighted fair queueing scheduler: A Weighted Fair Queueing scheduler between the streams is used. The weight is configurable per outgoing SCTP stream. This scheduler considers the lengths of the messages of each stream and schedules them in a specific way to use the capacity according to the given weights. If the weight of stream S1 is n times the weight of stream S2, the scheduler should assign to stream S1 n times the capacity it assigns to stream S2. The details are implementation dependent. Interleaving user messages allows for a better realization of the capacity usage according to the given weights. This patch adds Weighted Fair Queueing Scheduler actually based on the code of Fair Capacity Scheduler by adding fc_weight into struct sctp_stream_out_ext and taking it into account when sorting stream-> fc_list in sctp_sched_fc_sched() and sctp_sched_fc_dequeue_done(). Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Xin Long authored
As it says in rfc8260#section-3.5 about the fair capacity scheduler: A fair capacity distribution between the streams is used. This scheduler considers the lengths of the messages of each stream and schedules them in a specific way to maintain an equal capacity for all streams. The details are implementation dependent. interleaving user messages allows for a better realization of the fair capacity usage. This patch adds Fair Capacity Scheduler based on the foundations added by commit 5bbbbe32 ("sctp: introduce stream scheduler foundations"): A fc_list and a fc_length are added into struct sctp_stream_out_ext and a fc_list is added into struct sctp_stream. In .enqueue, when there are chunks enqueued into a stream, this stream will be linked into stream-> fc_list by its fc_list ordered by its fc_length. In .dequeue, it always picks up the 1st skb from stream->fc_list. In .dequeue_done, fc_length is increased by chunk's len and update its location in stream->fc_list according to the its new fc_length. Note that when the new fc_length overflows in .dequeue_done, instead of resetting all fc_lengths to 0, we only reduced them by U32_MAX / 4 to avoid a moment of imbalance in the scheduling, as Marcelo suggested. Signed-off-by:
-
Paolo Abeni authored
Russell King says: ==================== Various mtk_eth_soc cleanups Here are a number of patches that do a bit of cleanup to mtk_eth_soc. The first patch cleans up mtk_gmac0_rgmii_adjust(), which is the troublesome function preventing the driver becoming a post-March2020 phylink driver. It doesn't solve that problem, merely makes the code easier to follow by getting rid of repeated tenary operators. The second patch moves the check for DDR2 memory to the initialisation of phylink's supported_interfaces - if TRGMII is not possible for some reason, we should not be erroring out in phylink MAC operations when that can be determined prior to phylink creation. The third patch removes checks from mtk_mac_config() that are done when initialising supported_interfaces - phylink will not call mtk_mac_config() with an interface that was not marked as supported, so these checks are redundant. The last patch removes the remaining vestiges of REVMII and RMII support, which appears to be entirely unused. These shouldn't conflict with Daniel's patch set, but if they do I will rework as appropriate. ==================== Link: https://lore.kernel.org/r/ZAdj9qUXcHUsK7Gt@shell.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
Since the conversion of mtk_eth_soc to phylink's supported_interfaces bitmap, these two modes have not been selectable. No one has raised this as an issue. Checking the in-kernel DT files, none of them use either of these modes with this hardware. Daniel Golle concurs: A quick grep through the device trees of the more than 650 ramips and mediatek boards we support in OpenWrt has revealed that *none* of them uses either reduced-MII or reverse-MII PHY modes. I could imaging that some more specialized ramips boards may use the RMII 100M PHY mode to connect with exotic PHYs for industrial or automotive applications (think: for 100BASE-T1 PHY connected via RMII). I have never seen or touched such boards, but there are hints that they do exist. For reverse-MII there are cases in which the Ralink SoC (Rt305x, for example) is used in iNIC mode, ie. connected as a PHY to another SoC, and running only a minimal firmware rather than running Linux. Due to the lack of external DRAM for the Ralink SoC on this kind of boards, the Ralink SoC there will anyway never be able to boot Linux. I've seen this e.g. in multimedia devices like early WiFi-connected not-yet-so-smart TVs. Consequently, the conclusion is that no one uses these modes with this hardware, so we might as well drop support for them. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King (Oracle) authored
mtk_mac_config() checks that the interface mode is permitted for the capabilities, but we already do these checks in mtk_add_mac() when initialising phylink's supported_interfaces bitmap. Remove the unnecessary tests. Signed-off-by:
-
Russell King (Oracle) authored
If TRGMII mode is not permitted when using DDR2 mode, we should handle that when setting up phylink's ->supported_interfaces so phylink knows that this is not supported by the hardware. Move this check to mtk_add_mac(). Signed-off-by:
-
Russell King (Oracle) authored
Get rid of the multiple tenary operators in mtk_gmac0_rgmii_adjust() replacing them with a single if(), thus making the code easier to read. Signed-off-by:
-
Jakub Kicinski authored
Bjorn Helgaas says: ==================== PCI/AER: Remove redundant Device Control Error Reporting Enable From: Bjorn Helgaas <bhelgaas@google.com> Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), which appeared in v6.0, the PCI core has enabled PCIe error reporting for all devices during enumeration. Remove driver code to do this and remove unnecessary includes of <linux/aer.h> from several other drivers. Intel folks, sorry that I missed removing the <linux/aer.h> includes in the first series. ==================== Link: https://lore.kernel.org/r/20230307181940.868828-1-helgaas@kernel.orgSigned-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
51b35a45 ("sfc: skeleton EF100 PF driver") added a call to pci_disable_pcie_error_reporting() in ef100_pci_remove(). Remove this call since there's no apparent reason to disable error reporting when it was not previously enabled. Note that since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core enables PCIe error reporting for all devices during enumeration, so the driver doesn't need to do it itself. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Acked-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Also note that the driver only called these for NX_IS_REVISION_P3 devices, so since f26e58bf, error reporting has been enabled for devices other than NX_IS_REVISION_P3. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
Dimitris Michailidis <dmichail@fungible.com> Acked-by:
-
