Clang produces the following warning

drivers/dma/mv_xor_v2.c:264:40: warning: shifting a negative signed value
	is undefined [-Wshift-negative-value]
        reg &= (~MV_XOR_V2_DMA_IMSG_THRD_MASK <<
	MV_XOR_V2_DMA_IMSG_THRD_SHIFT);
                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
drivers/dma/mv_xor_v2.c:271:46: warning: shifting a negative signed value
	is undefined [-Wshift-negative-value]
        reg &= (~MV_XOR_V2_DMA_IMSG_TIMER_THRD_MASK <<
                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^

Upon further investigation MV_XOR_V2_DMA_IMSG_THRD_SHIFT and
MV_XOR_V2_DMA_IMSG_TIMER_THRD_SHIFT are both 0. Since shifting by 0 does
nothing, these variables can be removed.

Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/521Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20190813173448.109859-1-nhuck@google.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fix typo (s/dwi-/dw-/) in the directory path.

Fixes: 1fe20f1b ("dmaengine: Introduce DW AXI DMAC driver")
Signed-off-by: Denis Efremov <efremov@linux.com>
Link: https://lore.kernel.org/r/20190813060004.10594-1-efremov@linux.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Intel Elkhart Lake Offload Service Engine (OSE) will be called as
Intel(R) Programmable Services Engine (Intel(R) PSE) in documentation.

Update the comment here accordingly.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20190813080602.15376-1-jarkko.nikula@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Rename the device tree bindings for renesas "Type-AXI" NBPFAXI* DMA
controllers from nbpfaxi.txt to renesas,nbpfaxi.txt.

This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190819135244.18183-1-horms+renesas@verge.net.auSigned-off-by: Vinod Koul <vkoul@kernel.org>

Mark switch cases where we are expecting to fall through.

Fix the following warning (Building: powerpc-ppa8548_defconfig powerpc):

drivers/dma/fsldma.c: In function ‘fsl_dma_chan_probe’:
drivers/dma/fsldma.c:1165:26: warning: this statement may fall through [-Wimplicit-fallthrough=]
   chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
   ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/dma/fsldma.c:1166:2: note: here
  case FSL_DMA_IP_83XX:
  ^~~~
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20190812002159.GA26899@embeddedorSigned-off-by: Vinod Koul <vkoul@kernel.org>

The two filter functions are now marked static, but still exported,
which triggers a coming build-time check:

WARNING: "omap_dma_filter_fn" [vmlinux] is a static EXPORT_SYMBOL_GPL
WARNING: "edma_filter_fn" [vmlinux] is a static EXPORT_SYMBOL

Remove the unneeded exports as well, as originally intended.

Fixes: 9c71b9eb ("dmaengine: omap-dma: make omap_dma_filter_fn private")
Fixes: d2bfe7b5 ("dmaengine: edma: make edma_filter_fn private")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190812101155.997721-1-arnd@arndb.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

Implement .device_synchronize callback in order to be able to use
dmaengine_terminate_sync() and other primitives relying on said
callback.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: linux-imx@nxp.com
Cc: dmaengine@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20190731173659.14778-1-andrew.smirnov@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

In function dmac_alloc_resources(), pl330->mcode_cpu is allocated using
dma_alloc_attrs() but freed with dma_free_coherent().
Use the correct dma_free_attrs() function to free pl330->mcode_cpu.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Link: https://lore.kernel.org/r/20190726105947.25342-1-huangfq.daxian@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a goto from the middle of the loop, there is
no put, thus causing a memory leak.
Hence add an of_node_put under the label that the gotos point to.
In order to avoid decrementing an already-decremented refcount, copy the
original contents of the label (including the return statement) to just
above the label, so that the code under the label is executed only when
a goto exit from the loop occurs.
Additionally, remove an unnecessary get/put pair from the loop, as the
loop itself already keeps track of refcount.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Acked-by: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20190724081609.9724-1-nishkadg.linux@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add edma2 for i.mx7ulp by version v3, since v2 has already
been used by mcf-edma.
The big changes based on v1 are belows:
1. only one dmamux.
2. another clock dma_clk except dmamux clk.
3. 16 independent interrupts instead of only one interrupt for
all channels.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1563952834-7731-1-git-send-email-yibin.gong@nxp.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

In commit 518a2f19
("dma-mapping: zero memory returned from dma_alloc_*"),
dma_alloc_coherent has already zeroed the memory.
So memset is not needed.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Acked-by: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20190715031723.6375-1-huangfq.daxian@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

In commit 518a2f19
("dma-mapping: zero memory returned from dma_alloc_*"),
dma_alloc_coherent has already zeroed the memory.
So memset is not needed.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Link: https://lore.kernel.org/r/20190715031716.6328-1-huangfq.daxian@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Vinod Koul <vkoul@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: dmaengine@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-11-swboyd@chromium.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: arm):

drivers/dma/imx-dma.c: In function ‘imxdma_xfer_desc’:
drivers/dma/imx-dma.c:542:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (slot == IMX_DMA_2D_SLOT_A) {
      ^
drivers/dma/imx-dma.c:559:2: note: here
  case IMXDMA_DESC_MEMCPY:
  ^~~~

Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20190729225221.GA24269@embeddedorReviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

The Tegra210 ADMA supports two modes for transferring data to a FIFO
which are ...

1. Transfer data to/from the FIFO as soon as a single burst can be
   transferred.
2. Transfer data to/from the FIFO based upon FIFO thresholds, where
   the FIFO threshold is specified in terms on multiple bursts.

Currently, the ADMA driver programs the FIFO threshold values in the
FIFO_CTRL register, but never enables the transfer mode that uses
these threshold values. Given that these have never been used so far,
simplify the ADMA driver by removing the programming of these threshold
values.
Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20190731101639.22755-1-jonathanh@nvidia.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use use device_property_count_u32() directly, that makes code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190723190757.67351-2-andriy.shevchenko@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use use device_property_count_u32() directly, that makes code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190723190757.67351-1-andriy.shevchenko@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Rename the bindings documentation file for shdma
from shdma.txt to renesas,shdma.txt.

This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190724114946.14021-1-horms+renesas@verge.net.au
[vkoul: add subsystem name]
Signed-off-by: Vinod Koul <vkoul@kernel.org>

The newer Allwinner SoCs have a DMA controller supported in Linux, with a
matching Device Tree binding.

Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190720092607.31095-3-maxime.ripard@bootlin.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The older Allwinner SoCs have a DMA controller supported in Linux, with a
matching Device Tree binding.

Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190720092607.31095-2-maxime.ripard@bootlin.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The DMA controllers and consumers have a bunch of generic properties that
are needed in a device tree. Add a YAML schemas for those.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>

Link: https://lore.kernel.org/r/20190720092607.31095-1-maxime.ripard@bootlin.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

When a DMA client driver does not set the DMA_PREP_INTERRUPT because it
does not want to use interrupts for DMA completion or because it can not
rely on DMA interrupts due to executing the memcpy when interrupts are
disabled it will poll the status of the transfer.

Since we can not tell from any EDMA register that the transfer is
completed, we can only know that the paRAM set has been sent to TPTC for
processing we need to check the residue of the transfer, if it is 0 then
the transfer is completed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190716082655.1620-4-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

For memcpy we never stored the start address of the transfer for the pset
which rendered the memcpy residue calculation completely broken.

In the edma_residue() function we also need to to some correction for the
calculations:
Instead waiting for all EDMA channels to be idle (in a busy system it can
take few iteration to hit a point when all queues are idle) wait for the
event pending on the given channel (SH_ER for hw synchronized channels,
SH_ESR for manually triggered channels).

If the position returned by EMDA is 0 it implies that the last paRAM set
has been consumed and we are at the closing dummy set, thus we can conclude
that the transfer is completed and we can return 0 as residue.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[vkoul: fixed typo in commit log]
Link: https://lore.kernel.org/r/20190716082655.1620-3-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Introduce defines for getting the array index and the bit number within the
64bit array register pairs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190716082655.1620-2-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

When a DMA client driver does not set the DMA_PREP_INTERRUPT because it
does not want to use interrupts for DMA completion or because it can not
rely on DMA interrupts due to executing the memcpy when interrupts are
disabled it will poll the status of the transfer.

If the interrupts are enabled then the cookie will be set completed in the
interrupt handler so only check in HW completion when the polling is really
needed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190716082459.1222-3-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The tx_status is most likely going to be asked for the current transfer, so
check that first then try to fall back to lookup of non started transfers.

In this way the code is a bit more readable and in most cases we will avoid
to run vchan_find_desc() all the time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190716082459.1222-2-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The current driver works perfectly fine on every generation of the
JZ47xx SoCs, except on the JZ4740.

There, when hardware descriptors are chained together (with the LINK
bit set), the next descriptor isn't automatically fetched as it should -
instead, an interrupt is raised, even if the TIE bit (Transfer Interrupt
Enable) bit is cleared. When it happens, the DMA transfer seems to be
stopped (it doesn't chain), and it's uncertain how many bytes have
actually been transferred.

Until somebody smarter than me can figure out how to make chained
descriptors work on the JZ4740, we now disable chained descriptors on
that particular SoC.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20190714215504.10877-1-paul@crapouillou.netSigned-off-by: Vinod Koul <vkoul@kernel.org>

Tegra's APB DMA engine updates words counter after each transferred burst
of data, hence it can report transfer's residual with more fidelity which
may be required in cases like audio playback. In particular this fixes
audio stuttering during playback in a chromium web browser. The patch is
based on the original work that was made by Ben Dooks and a patch from
downstream kernel. It was tested on Tegra20 and Tegra30 devices.

Link: https://lore.kernel.org/lkml/20190424162348.23692-1-ben.dooks@codethink.co.uk/
Link: https://nv-tegra.nvidia.com/gitweb/?p=linux-4.4.git;a=commit;h=c7bba40c6846fbf3eaad35c4472dcc7d8bbc02e5Inspired-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20190705150519.18171-1-digetx@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

During enabling of the RPi 4, we found out that the driver doesn't provide
a helpful error message in case setting DMA mask fails. So add one.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/1563297318-4900-1-git-send-email-wahrenst@gmx.netSigned-off-by: Vinod Koul <vkoul@kernel.org>

With the audio driver no longer referring to this function, it
can be made private to the dmaengine driver itself, and the
header file removed.
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190722081705.2084961-2-arnd@arndb.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

With the audio driver no longer referring to this function, it
can be made private to the dmaengine driver itself, and the
header file removed.
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/lkml/20190307151646.1016966-1-arnd@arndb.de/Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190722081705.2084961-1-arnd@arndb.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

Pull Devicetree fixes from Rob Herring:
 "Fix several warnings/errors in validation of binding schemas"

* tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
  dt-bindings: iio: ad7124: Fix dtc warnings in example
  dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
  dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
  dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
  dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
  dt-bindings: Ensure child nodes are of type 'object'

Pull vfs documentation typo fix from Al Viro.

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  typo fix: it's d_make_root, not d_make_inode...

Pull cifs fixes from Steve French:
 "Two fixes for stable, one that had dependency on earlier patch in this
  merge window and can now go in, and a perf improvement in SMB3 open"

* tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  cifs: flush before set-info if we have writeable handles
  smb3: optimize open to not send query file internal info
  cifs: copy_file_range needs to strip setuid bits and update timestamps
  CIFS: fix deadlock in cached root handling

The commit b3aa14f0 ("iommu: remove the mapping_error dma_map_ops
method") incorrectly changed the checking from dma_ops_alloc_iova() in
map_sg() causes a crash under memory pressure as dma_ops_alloc_iova()
never return DMA_MAPPING_ERROR on failure but 0, so the error handling
is all wrong.

   kernel BUG at drivers/iommu/iova.c:801!
    Workqueue: kblockd blk_mq_run_work_fn
    RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0
    Call Trace:
     free_cpu_cached_iovas+0xbd/0x150
     alloc_iova_fast+0x8c/0xba
     dma_ops_alloc_iova.isra.6+0x65/0xa0
     map_sg+0x8c/0x2a0
     scsi_dma_map+0xc6/0x160
     pqi_aio_submit_io+0x1f6/0x440 [smartpqi]
     pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi]
     scsi_queue_rq+0x79c/0x1200
     blk_mq_dispatch_rq_list+0x4dc/0xb70
     blk_mq_sched_dispatch_requests+0x249/0x310
     __blk_mq_run_hw_queue+0x128/0x200
     blk_mq_run_work_fn+0x27/0x30
     process_one_work+0x522/0xa10
     worker_thread+0x63/0x5b0
     kthread+0x1d2/0x1f0
     ret_from_fork+0x22/0x40

Fixes: b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(),
pte_free_kernel() and pte_free() is identical to the generic except of
lack of __GFP_ACCOUNT for the user PTEs allocation.

Switch hexagon to use generic version of these functions.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NTB updates from Jon Mason:
 "New feature to add support for NTB virtual MSI interrupts, the ability
  to test and use this feature in the NTB transport layer.

  Also, bug fixes for the AMD and Switchtec drivers, as well as some
  general patches"

* tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits)
  NTB: Describe the ntb_msi_test client in the documentation.
  NTB: Add MSI interrupt support to ntb_transport
  NTB: Add ntb_msi_test support to ntb_test
  NTB: Introduce NTB MSI Test Client
  NTB: Introduce MSI library
  NTB: Rename ntb.c to support multiple source files in the module
  NTB: Introduce functions to calculate multi-port resource index
  NTB: Introduce helper functions to calculate logical port number
  PCI/switchtec: Add module parameter to request more interrupts
  PCI/MSI: Support allocating virtual MSI interrupts
  ntb_hw_switchtec: Fix setup MW with failure bug
  ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case
  ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function
  NTB: correct ntb_dev_ops and ntb_dev comment typos
  NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask()
  ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()
  NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed
  NTB: ntb_hw_amd: set peer limit register
  NTB: ntb_perf: Clear stale values in doorbell and command SPAD register
  NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers
  ...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Now that examples are validated against the DT schema, an error with
required 'clocks' property missing is exposed:

Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@40020000: gpio@0: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@1000: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@2000: 'clocks' is a required property

Add the missing 'clocks' properties to the examples to fix the errors.

Fixes: 2c9239c1 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema")
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>