Pull HSI updates from Sebastian Reichel:

 - fix build warning with W=1

 - drop error handling for debugfs

* tag 'hsi-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: omap_ssi_port: Drop error checking for debugfs_create_dir
  HSI: fix ssi_waketest() declaration

Pull power supply and reset updates from Sebastian Reichel:

 - Add new Qualcomm PMI8998/PM660 SMB2 charger

 - bq256xx: support systems without thermistors

 - cros_pchg: fix peripheral device status after system resume

 - axp20x_usb_power: add support for AXP192

 - qcom-pon: add support for pm8941

 - at91-reset: prepare to expose reset reason to sysfs

 - switch all I2C drivers back to use .probe instead of .probe_new

 - convert some more DT bindings to YAML

 - misc cleanups

* tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller
  dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml
  dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml
  power: reset: at91-reset: change the power on reason prototype
  power: reset: qcom-pon: add support for pm8941-pon
  dt-bindings: power: reset: qcom-pon: define pm8941-pon
  power: supply: add Qualcomm PMI8998 SMB2 Charger driver
  dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver
  power: supply: rt9467: Make charger-enable control as logic level
  power: supply: Switch i2c drivers back to use .probe()
  power: reset: add HAS_IOPORT dependencies
  dt-bindings: power: supply: axp20x: Add AXP192 compatible
  power: supply: axp20x_usb_power: Add support for AXP192
  power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check
  power: supply: axp20x_usb_power: Use regmap field for VBUS disabling
  power: supply: axp20x_usb_power: Use regmap fields for USB BC feature
  power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature
  power: supply: axp20x_usb_power: Simplify USB current limit handling
  power: supply: hwmon: constify pointers to hwmon_channel_info
  power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed()
  ...

Pull remoteproc updates from Bjorn Andersson:
 "The bulk of these patches relates to the moving to a void-returning
  remove callback.

  The i.MX HiFi remoteproc driver gets its pm_ops helpers updated to
  resolve build warnings about 'defined but not used' variables in
  certain configurations.

  The ST STM32 remoteproc driver is extended to allow using a SCMI reset
  controller to hold boot, and has an error message corrected.

  The Qualcomm Q6V5 PAS driver gains a missing 'static' qualifier on
  adsp_segment_dump()"

* tag 'rproc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits)
  remoteproc: qcom_q6v5_pas: staticize adsp_segment_dump()
  remoteproc: stm32: Fix error code in stm32_rproc_parse_dt()
  remoteproc: stm32: Allow hold boot management by the SCMI reset controller
  dt-bindings: remoteproc: st,stm32-rproc: Rework reset declarations
  remoteproc: imx_dsp_rproc: use modern pm_ops
  remoteproc: wkup_m3: Convert to platform remove callback returning void
  remoteproc: stm32: Convert to platform remove callback returning void
  remoteproc: st: Convert to platform remove callback returning void
  remoteproc: virtio: Convert to platform remove callback returning void
  remoteproc: rcar: Convert to platform remove callback returning void
  remoteproc: qcom_wcnss: Convert to platform remove callback returning void
  remoteproc: qcom_q6v5_wcss: Convert to platform remove callback returning void
  remoteproc: qcom_q6v5_pas: Convert to platform remove callback returning void
  remoteproc: qcom_q6v5_mss: Convert to platform remove callback returning void
  remoteproc: qcom_q6v5_adsp: Convert to platform remove callback returning void
  remoteproc: pru: Convert to platform remove callback returning void
  remoteproc: omap: Convert to platform remove callback returning void
  remoteproc: mtk_scp: Convert to platform remove callback returning void
  remoteproc: meson_mx_ao_arc: Convert to platform remove callback returning void
  remoteproc: keystone: Convert to platform remove callback returning void
  ...

Pull hwspinlock update from Bjorn Andersson:
 "This drops the last of_match_ptr() from the hwspinlock drivers,
  solving the resulting 'defined but not used' warning/error"

* tag 'hwlock-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  hwspinlock: omap: drop of_match_ptr for ID table

After a change to the bnxt_re driver, it fails to link when
CONFIG_INFINIBAND_USER_ACCESS is disabled:

  aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o: in function `bnxt_re_handler_BNXT_RE_METHOD_ALLOC_PAGE':
  ib_verbs.c:(.text+0xd64): undefined reference to `ib_uverbs_get_ucontext_file'
  aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o:(.rodata+0x168): undefined reference to `uverbs_idr_class'
  aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o:(.rodata+0x1a8): undefined reference to `uverbs_destroy_def_handler'

The problem is that the 'bnxt_re_uapi_defs' structure is built
unconditionally and references a couple of functions that are never
really called in this configuration but instead require other functions
that are left out.

Adding an #ifdef around the new code, or a Kconfig dependency would
address this problem, but adding the compile-time check inside of the
UAPI_DEF_CHAIN_OBJ_TREE_NAMED() macro seems best because that also
addresses the problem in other drivers that may run into the same
dependency.

Fixes: 360da60d ("RDMA/bnxt_re: Enable low latency push")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull virtio updates from Michael Tsirkin:

 - resume support in vdpa/solidrun

 - structure size optimizations in virtio_pci

 - new pds_vdpa driver

 - immediate initialization mechanism for vdpa/ifcvf

 - interrupt bypass for vdpa/mlx5

 - multiple worker support for vhost

 - viirtio net in Intel F2000X-PL support for vdpa/ifcvf

 - fixes, cleanups all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
  vhost: Make parameter name match of vhost_get_vq_desc()
  vduse: fix NULL pointer dereference
  vhost: Allow worker switching while work is queueing
  vhost_scsi: add support for worker ioctls
  vhost: allow userspace to create workers
  vhost: replace single worker pointer with xarray
  vhost: add helper to parse userspace vring state/file
  vhost: remove vhost_work_queue
  vhost_scsi: flush IO vqs then send TMF rsp
  vhost_scsi: convert to vhost_vq_work_queue
  vhost_scsi: make SCSI cmd completion per vq
  vhost_sock: convert to vhost_vq_work_queue
  vhost: convert poll work to be vq based
  vhost: take worker or vq for flushing
  vhost: take worker or vq instead of dev for queueing
  vhost, vhost_net: add helper to check if vq has work
  vhost: add vhost_worker pointer to vhost_virtqueue
  vhost: dynamically allocate vhost_worker
  vhost: create worker at end of vhost_dev_set_owner
  virtio_bt: call scheduler when we free unused buffs
  ...

Pull kvm updates from Paolo Bonzini:
 "ARM64:

   - Eager page splitting optimization for dirty logging, optionally
     allowing for a VM to avoid the cost of hugepage splitting in the
     stage-2 fault path.

   - Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
     with services that live in the Secure world. pKVM intervenes on
     FF-A calls to guarantee the host doesn't misuse memory donated to
     the hyp or a pKVM guest.

   - Support for running the split hypervisor with VHE enabled, known as
     'hVHE' mode. This is extremely useful for testing the split
     hypervisor on VHE-only systems, and paves the way for new use cases
     that depend on having two TTBRs available at EL2.

   - Generalized framework for configurable ID registers from userspace.
     KVM/arm64 currently prevents arbitrary CPU feature set
     configuration from userspace, but the intent is to relax this
     limitation and allow userspace to select a feature set consistent
     with the CPU.

   - Enable the use of Branch Target Identification (FEAT_BTI) in the
     hypervisor.

   - Use a separate set of pointer authentication keys for the
     hypervisor when running in protected mode, as the host is untrusted
     at runtime.

   - Ensure timer IRQs are consistently released in the init failure
     paths.

   - Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
     Traps (FEAT_EVT), as it is a register commonly read from userspace.

   - Erratum workaround for the upcoming AmpereOne part, which has
     broken hardware A/D state management.

  RISC-V:

   - Redirect AMO load/store misaligned traps to KVM guest

   - Trap-n-emulate AIA in-kernel irqchip for KVM guest

   - Svnapot support for KVM Guest

  s390:

   - New uvdevice secret API

   - CMM selftest and fixes

   - fix racy access to target CPU for diag 9c

  x86:

   - Fix missing/incorrect #GP checks on ENCLS

   - Use standard mmu_notifier hooks for handling APIC access page

   - Drop now unnecessary TR/TSS load after VM-Exit on AMD

   - Print more descriptive information about the status of SEV and
     SEV-ES during module load

   - Add a test for splitting and reconstituting hugepages during and
     after dirty logging

   - Add support for CPU pinning in demand paging test

   - Add support for AMD PerfMonV2, with a variety of cleanups and minor
     fixes included along the way

   - Add a "nx_huge_pages=never" option to effectively avoid creating NX
     hugepage recovery threads (because nx_huge_pages=off can be toggled
     at runtime)

   - Move handling of PAT out of MTRR code and dedup SVM+VMX code

   - Fix output of PIC poll command emulation when there's an interrupt

   - Add a maintainer's handbook to document KVM x86 processes,
     preferred coding style, testing expectations, etc.

   - Misc cleanups, fixes and comments

  Generic:

   - Miscellaneous bugfixes and cleanups

  Selftests:

   - Generate dependency files so that partial rebuilds work as
     expected"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
  Documentation/process: Add a maintainer handbook for KVM x86
  Documentation/process: Add a label for the tip tree handbook's coding style
  KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
  RISC-V: KVM: Remove unneeded semicolon
  RISC-V: KVM: Allow Svnapot extension for Guest/VM
  riscv: kvm: define vcpu_sbi_ext_pmu in header
  RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
  RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
  RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
  RISC-V: KVM: Add in-kernel emulation of AIA APLIC
  RISC-V: KVM: Implement device interface for AIA irqchip
  RISC-V: KVM: Skeletal in-kernel AIA irqchip support
  RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
  RISC-V: KVM: Add APLIC related defines
  RISC-V: KVM: Add IMSIC related defines
  RISC-V: KVM: Implement guest external interrupt line management
  KVM: x86: Remove PRIx* definitions as they are solely for user space
  s390/uv: Update query for secret-UVCs
  s390/uv: replace scnprintf with sysfs_emit
  s390/uvdevice: Add 'Lock Secret Store' UVC
  ...

Pull kgdb updates from Daniel Thompson:
 "Fairly small changes this cycle:

   - An additional static inline function when kgdb is not enabled to
     reduce boilerplate in arch files

   - kdb will now handle input with linefeeds more like carriage return.
     This will make little difference for interactive use but can make
     it script to use expect-like interaction with kdb

   - A couple of warning fixes"

* tag 'kgdb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: move kdb_send_sig() declaration to a better header file
  kdb: Handle LF in the command parser
  kdb: include kdb_private.h for function prototypes
  kgdb: Provide a stub kgdb_nmicallback() if !CONFIG_KGDB

Pull USB / Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.

  Included in here are:

   - Lots of USB4/Thunderbolt additions and updates for new hardware
     types and fixes as people are starting to get access to the
     hardware in the wild

   - new gadget controller driver, cdns2, added

   - new typec drivers added

   - xhci driver updates

   - typec driver updates

   - usbip driver fixes

   - usb-serial driver updates and fixes

   - lots of smaller USB driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
  usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
  usb: host: xhci: Do not re-initialize the XHCI HC if being removed
  usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
  usbip: usbip_host: Replace strlcpy with strscpy
  usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  USB: serial: option: add LARA-R6 01B PIDs
  usb: ulpi: Make container_of() no-op in to_ulpi_dev()
  usb: gadget: legacy: fix error return code in gfs_bind
  usb: typec: fsa4480: add support for Audio Accessory Mode
  usb: typec: fsa4480: rework mux & switch setup to handle more states
  usb: typec: ucsi: call typec_set_mode on non-altmode partner change
  USB: gadget: f_hid: make hidg_class a static const structure
  USB: gadget: f_printer: make usb_gadget_class a static const structure
  USB: mon: make mon_bin_class a static const structure
  USB: gadget: udc: core: make udc_class a static const structure
  USB: roles: make role_class a static const structure
  dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
  dt-bindings: usb: Add StarFive JH7110 USB controller
  dt-bindings: usb: dwc3: Add IPQ9574 compatible
  usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 6.5-rc1.

  Included in here are:

   - tty_audit code cleanups from Jiri

   - more 8250 cleanups from Ilpo

   - samsung_tty driver bugfixes

   - 8250 lock port updates

   - usual fsl_lpuart driver updates and fixes

   - other small serial driver fixes and updates, full details in the
     shortlog

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
  tty_audit: make data of tty_audit_log() const
  tty_audit: make tty pointers in exposed functions const
  tty_audit: make icanon a bool
  tty_audit: invert the condition in tty_audit_log()
  tty_audit: use kzalloc() in tty_audit_buf_alloc()
  tty_audit: use TASK_COMM_LEN for task comm
  Revert "8250: add support for ASIX devices with a FIFO bug"
  serial: atmel: don't enable IRQs prematurely
  tty: serial: Add Nuvoton ma35d1 serial driver support
  tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
  tty: serial: imx: fix rs485 rx after tx
  selftests: tty: add selftest for tty timestamp updates
  tty: tty_io: update timestamps on all device nodes
  tty: fix hang on tty device with no_room set
  serial: core: fix -EPROBE_DEFER handling in init
  serial: 8250_omap: Use force_suspend and resume for system suspend
  tty: serial: samsung_tty: Use abs() to simplify some code
  tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
  tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
  serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
  ...

Pull staging driver updates from Greg KH:
 "Here is a set of staging driver updates for 6.5-rc1. It's a small
  update this merge window, nothing major at all, overall just under
  1000 lines of code removed, not a huge churn.

  Nothing major to highlight here either, just lots of small coding
  style fixes.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'staging-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (62 commits)
  staging: rtl8192e: Remove whitespace and blank lines
  staging: rtl8192e: remove 5G related code
  staging: rtl8192e: remove comparison to true
  staging: rtl8192e: remove return statement from void function
  staging: rtl8192e: convert else if sequence to switch
  staging: rtl8192e: clean up brace coding style issues
  staging: rtl8723bs: Fix blank line issues
  staging: rtl8723bs: Fix block comment issue
  staging: rtl8723bs: Fix indentation issues
  staging: vchiq_arm: Remove extra struct vchiq_instance declaration
  staging: rtl8192e: Rename variable InitialGainHandler
  staging: rtl8192e: Rename variable LeisurePSLeave
  staging: rtl8192e: Rename variable SetBWModeHandler
  staging: rtl8192e: Rename variable SetWirelessMode
  staging: rtl8192e: Rename RTLLIB_LINKED_SCANNING
  staging: rtl8192e: Rename RTLLIB_LINKED to MAC80211_LINKED
  staging: rtl8192e: Rename RTLLIB_NOLINK to MAC80211_NOLINK
  staging: rtl8192e: Rename state to link_state
  staging: rtl8192e: Rename rtllib_state to rtl_link_state
  staging: rtl8192e: Remove unused enum led_ctl_mode
  ...

Pull driver core updates from Greg KH:
 "Here are a small set of changes for 6.5-rc1 for some driver core
  changes. Included in here are:

   - device property cleanups to make it easier to write "agnostic"
     drivers when regards to the firmware layer underneath them (DT vs.
     ACPI)

   - debugfs documentation updates

   - devres additions

   - sysfs documentation and changes to handle empty directory creation
     logic better

   - tiny kernfs optimizations

   - other tiny changes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: Skip empty folders creation
  sysfs: Improve readability by following the kernel coding style
  drivers: fwnode: fix fwnode_irq_get[_byname]()
  ata: ahci_platform: Make code agnostic to OF/ACPI
  device property: Implement device_is_compatible()
  ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h
  base/node: Use 'property' to identify an access parameter
  driver core: device.h: add some missing kerneldocs
  kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR
  isa: Remove unnecessary checks
  MAINTAINERS: add entry for auxiliary bus
  debugfs: Correct the 'debugfs_create_str' docs
  serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array
  iio: adc: Use devm_krealloc_array
  hwmon: pmbus: Use devm_krealloc_array

Pull Char/Misc updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem updates
  for 6.5-rc1.

  Lots of different, tiny, stuff in here, from a range of smaller driver
  subsystems, including pulls from some substems directly:

   - IIO driver updates and additions

   - W1 driver updates and fixes (and a new maintainer!)

   - FPGA driver updates and fixes

   - Counter driver updates

   - Extcon driver updates

   - Interconnect driver updates

   - Coresight driver updates

   - mfd tree tag merge needed for other updates on top of that, lots of
     small driver updates as patches, including:

   - static const updates for class structures

   - nvmem driver updates

   - pcmcia driver fix

   - lots of other small driver updates and fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
  bsr: fix build problem with bsr_class static cleanup
  comedi: make all 'class' structures const
  char: xillybus: make xillybus_class a static const structure
  xilinx_hwicap: make icap_class a static const structure
  virtio_console: make port class a static const structure
  ppdev: make ppdev_class a static const structure
  char: misc: make misc_class a static const structure
  /dev/mem: make mem_class a static const structure
  char: lp: make lp_class a static const structure
  dsp56k: make dsp56k_class a static const structure
  bsr: make bsr_class a static const structure
  oradax: make 'cl' a static const structure
  hwtracing: hisi_ptt: Fix potential sleep in atomic context
  hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
  hwtracing: hisi_ptt: Export available filters through sysfs
  hwtracing: hisi_ptt: Add support for dynamically updating the filter list
  hwtracing: hisi_ptt: Factor out filter allocation and release operation
  samples: pfsm: add CC_CAN_LINK dependency
  misc: fastrpc: check return value of devm_kasprintf()
  coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
  ...

Pull backlight updates from Lee Jones:
 "New Functionality:
   - Add lots of Device Tree bindings / support
   - Turn off LED strings when display is blank
   - Switch I2C drivers from .probe_new() to .probe()
   - Remove superfluous NULL checks
   - Only obtain PWM information once and do it in .probe()

  Fix-ups:
   - Ensure locks are obtained and held when required"

* tag 'backlight-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: led_bl: Take led_access lock when required
  video: backlight: lp855x: Get PWM for PWM mode during probe
  dt-bindings: backlight: lp855x: Convert to YAML and modernize
  dt-bindings: backlight: pwm: Make power-supply not required
  backlight: pwm_bl: Remove unneeded checks for valid GPIOs
  backlight: Switch i2c drivers back to use .probe()
  backlight: lm3630a: Turn off both led strings when display is blank
  dt-bindings: leds: backlight: ktz8866: Add reg property and update example

Pull LED updates from Lee Jones:
 "New Drivers:
   - Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
   - Add support for Awinic AW20036/AW20054/AW20072 LEDs

  New Device Support:
   - Add support for PMI632 LPG to QCom LPG
   - Add support for PMI8998 to QCom Flash
   - Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC

  New Functionality:
   - Implement the LP55xx Charge Pump
   - Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
   - Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
   - Enable per-pin resolution Pinctrl in LEDs GPIO

  Fix-ups:
   - Allow thread to sleep by switching from spinlock to mutex
   - Add lots of Device Tree bindings / support
   - Adapt relationships / dependencies driven by Kconfig
   - Switch I2C drivers from .probe_new() to .probe()
   - Remove superfluous / duplicate code
   - Replace strlcpy() with strscpy() for efficiency and overflow prevention
   - Staticify various functions
   - Trivial: Fixing coding style
   - Simplify / reduce code

  Bug Fixes:
   - Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
   - Repair race between led_set_brightness(LED_{OFF,FULL})
   - Fix Oops relating to sleeping in critical sections
   - Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
   - Do not leak resources in error handling paths
   - Fix unsigned comparison which can never be negative
   - Provide missing NULL terminating entries in tables
   - Fix misnaming issues"

* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
  leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
  leds: sgm3140: Add richtek,rt5033-led compatible
  dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
  dt-bindings: leds: Drop unneeded quotes
  leds: Fix config reference for AW200xx driver
  leds: leds-mt6323: Add support for WLEDs and MT6332
  leds: leds-mt6323: Add support for MT6331 leds
  leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
  leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
  leds: leds-mt6323: Specify registers and specs in platform data
  dt-bindings: leds: leds-mt6323: Document mt6332 compatible
  dt-bindings: leds: leds-mt6323: Document mt6331 compatible
  leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
  leds: simatic-ipc-leds-gpio: Split up into multiple drivers
  leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
  leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
  leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
  leds: cht-wcove: Remove unneeded semicolon
  leds: cht-wcove: Fix an unsigned comparison which can never be negative
  ...

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for TI TPS6594/TPS6593/LP8764 PMICs
   - Add support for Samsung RT5033 Battery Charger
   - Add support for Analog Devices MAX77540 and MAX77541 PMICs

  New Device Support:
   - Add support for SPI to Rockchip RK808 (and friends)
   - Add support for AXP192 PMIC to X-Powers AXP20X
   - Add support for AXP313a PMIC to X-Powers AXP20X
   - Add support for RK806 to Rockchip RK8XX

  Removed Device Support:
   - Removed MFD support for Richtek RT5033 Battery

  Fix-ups:
   - Remove superfluous code
   - Switch I2C drivers from .probe_new() to .probe()
   - Convert over to managed resources (devm_*(), etc)
   - Use dev_err_probe() for returning errors from .probe()
   - Add lots of Device Tree bindings / support
   - Improve cache efficiency by switching to Maple
   - Use own exported namespaces (NS)
   - Include missing and remove superfluous headers
   - Start using / convert to the new shutdown sys-off API
   - Trivial: variable / define renaming
   - Make use of of_property_read_reg() when requesting DT 'reg's

  Bug Fixes:
   - Fix chip revision readout due to incorrect data masking
   - Amend incorrect register and mask values used for charger state
   - Hide unused functionality at compile time
   - Fix resource leaks following error handling routines
   - Return correct error values and fix error handling in general
   - Repair incorrect device names - used for device matching
   - Remedy broken module auto-loading"

* tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits)
  dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
  iio: adc: max77541: Add ADI MAX77541 ADC Support
  regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
  mfd: Switch two more drivers back to use struct i2c_driver::probe
  dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties
  mfd: stmpe: Only disable the regulators if they are enabled
  mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes
  mfd: core: Use of_property_read_reg() to parse "reg"
  mfd: stmfx: Nullify stmfx->vdd in case of error
  mfd: stmfx: Fix error path in stmfx_chip_init
  mfd: intel-lpss: Add missing check for platform_get_resource
  mfd: stpmic1: Add PMIC poweroff via sys-off handler
  mfd: stpmic1: Fixup main control register and bits naming
  dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074
  mfd: tps65219: Add support for soft shutdown via sys-off API
  mfd: pm8008: Drop bogus i2c module alias
  mfd: pm8008: Fix module autoloading
  mfd: tps65219: Add GPIO cell instance
  ...

Pull mailbox updates from Jassi Brar:

 - tegra: support for Tegra264

 - broadcom: convert bcm2835 bindings from txt to yaml bcm2835

 - qcom: support for IPQ5018

 - ti: always zero TX data fields

* tag 'mailbox-v6.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0
  mailbox: tegra: add support for Tegra264
  dt-bindings: mailbox: tegra: Document Tegra264 HSP
  dt-bindings: mailbox: convert bcm2835-mbox bindings to YAML
  dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatible

Pull RTC updates from Alexandre Belloni:
 "The isl1208 dirver was reworked tobe able to work as part of an MFD.

  All the Loongson chips are now supported through a new driver, the old
  one is removed.

  Summary:

  Subsystem:
   - Switch i2c drivers back to use .probe()
   - Constify pointers to hwmon_channel_info

  New driver:
   - Loongson on chip RTC, replacing the Loongson 1 only driver

  Drivers:
   - isl1208: cleanup and support for RAA215300
   - st-lpc: cleanups
   - stm32: fix wakeup"

* tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (21 commits)
  rtc: Add rtc driver for the Loongson family chips
  rtc: Remove the Loongson-1 RTC driver
  dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles
  rtc: rv3028: make rv3028 probeable from userspace
  rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300
  rtc: isl1208: Add isl1208_set_xtoscb()
  rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[]
  rtc: isl1208: Make similar I2C and DT-based matching table
  rtc: isl1208: Drop name variable
  dt-bindings: rtc: isil,isl1208: Document clock and clock-names properties
  dt-bindings: rtc: isl1208: Convert to json-schema
  rtc: st-lpc: Simplify clk handling in st_rtc_probe()
  rtc: st-lpc: Release some resources in st_rtc_probe() in case of error
  rtc: stm32: remove dedicated wakeup management
  dt-bindings: rtc: restrict node name suffixes
  rtc: add HAS_IOPORT dependencies
  rtc: Switch i2c drivers back to use .probe()
  rtc: rv3032: constify pointers to hwmon_channel_info
  rtc: isl12022: constify pointers to hwmon_channel_info
  rtc: ds3232: constify pointers to hwmon_channel_info
  ...

Pull i3c updates from Alexandre Belloni:

 - svc: fix suspend/resume on some platforms, fix locking issues

* tag 'i3c/for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: add NACK check after start byte sent
  i3c: master: svc: fix cpu schedule in spin lock
  i3c: master: svc: fix i3c suspend/resume issue

Commit 408579cd ("mm: Update do_vmi_align_munmap() return
semantics") made the return value and locking semantics of
do_vmi_align_munmap() more straightforward, but in the process it ended
up unlocking the mmap lock just a tad too early: the debug code doing
the mmap layout validation still needs to run with the lock held, or
things might change under it while it's trying to validate things.

So just move the unlocking to after the validate_mm() call.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/ZKIsoMOT71uwCIZX@xsang-OptiPlex-9020/
Fixes: 408579cd ("mm: Update do_vmi_align_munmap() return semantics")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While our user stacks can grow either down (all common architectures) or
up (parisc and the ia64 register stack), the initial stack setup when we
copy the argument and environment strings to the new stack at execve()
time is always done by extending the stack downwards.

But it turns out that in commit 8d7071af ("mm: always expand the
stack with the mmap write lock held"), as part of making the stack
growing code more robust, 'expand_downwards()' was now made to actually
check the vma flags:

	if (!(vma->vm_flags & VM_GROWSDOWN))
		return -EFAULT;

and that meant that this execve-time stack expansion started failing on
parisc, because on that architecture, the stack flags do not contain the
VM_GROWSDOWN bit.

At the same time the new check in expand_downwards() is clearly correct,
and simplified the callers, so let's not remove it.

The solution is instead to just codify the fact that yes, during
execve(), the stack grows down.  This not only matches reality, it ends
up being particularly simple: we already have special execve-time flags
for the stack (VM_STACK_INCOMPLETE_SETUP) and use those flags to avoid
page migration during this setup time (see vma_is_temporary_stack() and
invalid_migration_vma()).

So just add VM_GROWSDOWN to that set of temporary flags, and now our
stack flags automatically match reality, and the parisc stack expansion
works again.

Note that the VM_STACK_INCOMPLETE_SETUP bits will be cleared when the
stack is finalized, so we only add the extra VM_GROWSDOWN bit on
CONFIG_STACK_GROWSUP architectures (ie parisc) rather than adding it in
general.

Link: https://lore.kernel.org/all/612eaa53-6904-6e16-67fc-394f4faa0e16@bell.net/
Link: https://lore.kernel.org/all/5fd98a09-4792-1433-752d-029ae3545168@gmx.de/
Fixes: 8d7071af ("mm: always expand the stack with the mmap write lock held")
Reported-by: John David Anglin <dave.anglin@bell.net>
Reported-and-tested-by: Helge Deller <deller@gmx.de>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The parameter name in the function declaration and definition
should be the same.

drivers/vhost/vhost.h,
int vhost_get_vq_desc(..., unsigned int iov_count,...);

drivers/vhost/vhost.c,
int vhost_get_vq_desc(..., unsigned int iov_size,...)
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20230621093835.36878-1-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vduse_vdpa_set_vq_affinity callback can be called
with NULL value as cpu_mask when deleting the vduse
device.

This patch resets virtqueue's IRQ affinity mask value
to set all CPUs instead of dereferencing NULL cpu_mask.

[ 4760.952149] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 4760.959110] #PF: supervisor read access in kernel mode
[ 4760.964247] #PF: error_code(0x0000) - not-present page
[ 4760.969385] PGD 0 P4D 0
[ 4760.971927] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4760.976112] CPU: 13 PID: 2346 Comm: vdpa Not tainted 6.4.0-rc6+ #4
[ 4760.982291] Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.8.1 06/26/2020
[ 4760.989769] RIP: 0010:memcpy_orig+0xc5/0x130
[ 4760.994049] Code: 16 f8 4c 89 07 4c 89 4f 08 4c 89 54 17 f0 4c 89 5c 17 f8 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 fa 08 72 1b <4c> 8b 06 4c 8b 4c 16 f8 4c 89 07 4c 89 4c 17 f8 c3 cc cc cc cc 66
[ 4761.012793] RSP: 0018:ffffb1d565abb830 EFLAGS: 00010246
[ 4761.018020] RAX: ffff9f4bf6b27898 RBX: ffff9f4be23969c0 RCX: ffff9f4bcadf6400
[ 4761.025152] RDX: 0000000000000008 RSI: 0000000000000000 RDI: ffff9f4bf6b27898
[ 4761.032286] RBP: 0000000000000000 R08: 0000000000000008 R09: 0000000000000000
[ 4761.039416] R10: 0000000000000000 R11: 0000000000000600 R12: 0000000000000000
[ 4761.046549] R13: 0000000000000000 R14: 0000000000000080 R15: ffffb1d565abbb10
[ 4761.053680] FS:  00007f64c2ec2740(0000) GS:ffff9f635f980000(0000) knlGS:0000000000000000
[ 4761.061765] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4761.067513] CR2: 0000000000000000 CR3: 0000001875270006 CR4: 00000000007706e0
[ 4761.074645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4761.081775] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4761.088909] PKRU: 55555554
[ 4761.091620] Call Trace:
[ 4761.094074]  <TASK>
[ 4761.096180]  ? __die+0x1f/0x70
[ 4761.099238]  ? page_fault_oops+0x171/0x4f0
[ 4761.103340]  ? exc_page_fault+0x7b/0x180
[ 4761.107265]  ? asm_exc_page_fault+0x22/0x30
[ 4761.111460]  ? memcpy_orig+0xc5/0x130
[ 4761.115126]  vduse_vdpa_set_vq_affinity+0x3e/0x50 [vduse]
[ 4761.120533]  virtnet_clean_affinity.part.0+0x3d/0x90 [virtio_net]
[ 4761.126635]  remove_vq_common+0x1a4/0x250 [virtio_net]
[ 4761.131781]  virtnet_remove+0x5d/0x70 [virtio_net]
[ 4761.136580]  virtio_dev_remove+0x3a/0x90
[ 4761.140509]  device_release_driver_internal+0x19b/0x200
[ 4761.145742]  bus_remove_device+0xc2/0x130
[ 4761.149755]  device_del+0x158/0x3e0
[ 4761.153245]  ? kernfs_find_ns+0x35/0xc0
[ 4761.157086]  device_unregister+0x13/0x60
[ 4761.161010]  unregister_virtio_device+0x11/0x20
[ 4761.165543]  device_release_driver_internal+0x19b/0x200
[ 4761.170770]  bus_remove_device+0xc2/0x130
[ 4761.174782]  device_del+0x158/0x3e0
[ 4761.178276]  ? __pfx_vdpa_name_match+0x10/0x10 [vdpa]
[ 4761.183336]  device_unregister+0x13/0x60
[ 4761.187260]  vdpa_nl_cmd_dev_del_set_doit+0x63/0xe0 [vdpa]

Fixes: 28f6288e ("vduse: Support set_vq_affinity callback")
Cc: xieyongji@bytedance.com
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20230622204851.318125-1-maxime.coquelin@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>

This patch drops the requirement that we can only switch workers if work
has not been queued by using RCU for the vq based queueing paths and a
mutex for the device wide flush.

We can also use this to support SIGKILL properly in the future where we
should exit almost immediately after getting that signal. With this
patch, when get_signal returns true, we can set the vq->worker to NULL
and do a synchronize_rcu to prevent new work from being queued to the
vhost_task that has been killed.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-18-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This has vhost-scsi support the worker ioctls by calling the
vhost_worker_ioctl helper.

With a single worker, the single thread becomes a bottlneck when trying
to use 3 or more virtqueues like:

fio --filename=/dev/sdb  --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128  --numjobs=3

With the patches and doing a worker per vq, we can scale to at least
16 vCPUs/vqs (that's my system limit) with the same command fio command
above with numjobs=16:

fio --filename=/dev/sdb  --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=64  --numjobs=16

which gives around 2002K IOPs.

Note that for testing I dropped depth to 64 above because the vhost/virt
layer supports only 1024 total commands per device. And the only tuning I
did was set LIO's emulate_pr to 0 to avoid LIO's PR lock in the main IO
path which becomes an issue at around 12 jobs/virtqueues.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-17-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

For vhost-scsi with 3 vqs or more and a workload that tries to use
them in parallel like:

fio --filename=/dev/sdb  --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128  --numjobs=3

the single vhost worker thread will become a bottlneck and we are stuck
at around 500K IOPs no matter how many jobs, virtqueues, and CPUs are
used.

To better utilize virtqueues and available CPUs, this patch allows
userspace to create workers and bind them to vqs. You can have N workers
per dev and also share N workers with M vqs on that dev.

This patch adds the interface related code and the next patch will hook
vhost-scsi into it. The patches do not try to hook net and vsock into
the interface because:

1. multiple workers don't seem to help vsock. The problem is that with
only 2 virtqueues we never fully use the existing worker when doing
bidirectional tests. This seems to match vhost-scsi where we don't see
the worker as a bottleneck until 3 virtqueues are used.

2. net already has a way to use multiple workers.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-16-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The next patch allows userspace to create multiple workers per device,
so this patch replaces the vhost_worker pointer with an xarray so we
can store mupltiple workers and look them up.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-15-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The next patches add new vhost worker ioctls which will need to get a
vhost_virtqueue from a userspace struct which specifies the vq's index.
This moves the vhost_vring_ioctl code to do this to a helper so it can
be shared.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-14-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost_work_queue is no longer used. Each driver is using the poll or vq
based queueing, so remove vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-13-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

With one worker we will always send the scsi cmd responses then send the
TMF rsp, because LIO will always complete the scsi cmds first then call
into us to send the TMF response.

With multiple workers, the IO vq workers could be running while the
TMF/ctl vq worker is running so this has us do a flush before completing
the TMF to make sure cmds are completed when it's work is later queued
and run.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-12-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Convert from vhost_work_queue to vhost_vq_work_queue so we can
remove vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-11-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This patch separates the scsi cmd completion code paths so we can complete
cmds based on their vq instead of having all cmds complete on the same
worker/CPU. This will be useful with the next patches that allow us to
create mulitple worker threads and bind them to different vqs, and we can
have completions running on different threads/CPUs.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230626232307.97930-10-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Convert from vhost_work_queue to vhost_vq_work_queue, so we can drop
vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-9-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This has the drivers pass in their poll to vq mapping and then converts
the core poll code to use the vq based helpers. In the next patches we
will allow vqs to be handled by different workers, so to allow drivers
to execute operations like queue, stop, flush, etc on specific polls/vqs
we need to know the mappings.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-8-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This patch has the core work flush function take a worker. When we
support multiple workers we can then flush each worker during device
removal, stoppage, etc. It also adds a helper to flush specific
virtqueues, so vhost-scsi can flush IO vqs from it's ctl vq.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-7-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This patch has the core work queueing function take a worker for when we
support multiple workers. It also adds a helper that takes a vq during
queueing so modules can control which vq/worker to queue work on.

This temp leaves vhost_work_queue. It will be removed when the drivers
are converted in the next patches.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-6-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

In the next patches each vq might have different workers so one could
have work but others do not. For net, we only want to check specific vqs,
so this adds a helper to check if a vq has work pending and converts
vhost-net to use it.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230626232307.97930-5-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This patchset allows userspace to map vqs to different workers. This
patch adds a worker pointer to the vq so in later patches in this set
we can queue/flush specific vqs and their workers.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-4-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This patchset allows us to allocate multiple workers, so this has us
move from the vhost_worker that's embedded in the vhost_dev to
dynamically allocating it.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-3-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vsock can start queueing work after VHOST_VSOCK_SET_GUEST_CID, so
after we have called vhost_worker_create it can be calling
vhost_work_queue and trying to access the vhost worker/task. If
vhost_dev_alloc_iovecs fails, then vhost_worker_free could free
the worker/task from under vsock.

This moves vhost_worker_create to the end of vhost_dev_set_owner
where we know we can no longer fail in that path. If it fails
after the VHOST_SET_OWNER and userspace closes the device, then
the normal vsock release handling will do the right thing.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-2-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>