Move some code that is only reachable when IS_ENABLED(CONFIG_ARM) into
the ARM EFI arch code.

Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The EFI TCG spec, in §10.2.6 "Measuring UEFI Variables and UEFI GPT
Data", only reasons about the load options passed to a loaded image in
the context of boot options booted directly from the BDS, which are
measured into PCR #5 along with the rest of the Boot#### EFI variable.

However, the UEFI spec mentions the following in the documentation of
the LoadImage() boot service and the EFI_LOADED_IMAGE protocol:

  The caller may fill in the image’s "load options" data, or add
  additional protocol support to the handle before passing control to
  the newly loaded image by calling EFI_BOOT_SERVICES.StartImage().

The typical boot sequence for Linux EFI systems is to load GRUB via a
boot option from the BDS, which [hopefully] calls LoadImage to load the
kernel image, passing the kernel command line via the mechanism
described above. This means that we cannot rely on the firmware
implementing TCG measured boot to ensure that the kernel command line
gets measured before the image is started, so the EFI stub will have to
take care of this itself.

Given that PCR #5 has an official use in the TCG measured boot spec,
let's avoid it in this case. Instead, add a measurement in PCR #9 (which
we already use for our initrd) and extend it with the LoadOptions
measurements
Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Currently, from the efi-stub, we are only measuring the loaded initrd,
using the TCG2 measured boot protocols.  A following patch is
introducing measurements of additional components, such as the kernel
command line. On top of that, we will shortly have to support other
types of measured boot that don't expose the TCG2 protocols.

So let's prepare for that, by rejigging the efi_measure_initrd() routine
into something that we should be able to reuse for measuring other
assets, and which can be extended later to support other measured boot
protocols.
Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Second shared stable tag between EFI and LoongArch trees

This is necessary because the EFI libstub refactoring patches are mostly
directed at enabling LoongArch to wire up generic EFI boot support
without being forced to consume DT properties that conflict with
information that EFI also provides, e.g., memory map and reservations,
etc.

LoongArch does not use FDT or DT natively [yet], and the only reason it
currently uses it is so that it can reuse the existing EFI stub code.

Overloading the DT with data passed between the EFI stub and the core
kernel has been a source of problems: there is the overlap between
information provided by EFI which DT can also provide (initrd base/size,
command line, memory descriptions), requiring us to reason about which
is which and what to prioritize. It has also resulted in ABI leaks,
i.e., internal ABI being promoted to external ABI inadvertently because
the bootloader can set the EFI stub's DT properties as well (e.g.,
"kaslr-seed"). This has become especially problematic with boot
environments that want to pretend that EFI boot is being done (to access
ACPI and SMBIOS tables, for instance) but have no ability to execute the
EFI stub, and so the environment that the EFI stub creates is emulated
[poorly, in some cases].

Another downside of treating DT like this is that the DT binary that the
kernel receives is different from the one created by the firmware, which
is undesirable in the context of secure and measured boot.

Given that LoongArch support in Linux is brand new, we can avoid these
pitfalls, and treat the DT strictly as a hardware description, and use a
separate handover method between the EFI stub and the kernel. Now that
initrd loading and passing the EFI memory map have been refactored into
pure EFI routines that use EFI configuration tables, the only thing we
need to pass directly is the kernel command line (even if we could pass
this via a config table as well, it is used extremely early, so passing
it directly is preferred in this case.)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>

Expose the EFI boot time memory map to the kernel via a configuration
table. This is arch agnostic and enables future changes that remove the
dependency on DT on architectures that don't otherwise rely on it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Refactor the generic EFI stub entry code so that all the dependencies on
device tree are abstracted and hidden behind a generic efi_boot_kernel()
routine that can also be implemented in other ways. This allows users of
the generic stub to avoid using FDT for passing information to the core
kernel.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Use a EFI configuration table to pass the initrd to the core kernel,
instead of per-arch methods. This cleans up the code considerably, and
should make it easier for architectures to get rid of their reliance on
DT for doing EFI boot in the future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Remove some goto cruft that serves no purpose and obfuscates the code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Currently, struct efi_boot_memmap is a struct that is passed around
between callers of efi_get_memory_map() and the users of the resulting
data, and which carries pointers to various variables whose values are
provided by the EFI GetMemoryMap() boot service.

This is overly complex, and it is much easier to carry these values in
the struct itself. So turn the struct into one that carries these data
items directly, including a flex array for the variable number of EFI
memory descriptors that the boot service may return.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The virt map is a set of efi_memory_desc_t descriptors that are passed
to SetVirtualAddressMap() to inform the firmware about the desired
virtual mapping of the regions marked as EFI_MEMORY_RUNTIME. The only
reason we currently call the efi_get_memory_map() helper is that it
gives us an allocation that is guaranteed to be of sufficient size.
However, efi_get_memory_map() has grown some additional complexity over
the years, and today, we're actually better off calling the EFI boot
service directly with a zero size, which tells us how much memory should
be enough for the virt map.

While at it, avoid creating the VA map allocation if we will not be
using it anyway, i.e., if efi_novamap is true.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Currently, the non-x86 stub code calls get_memory_map() redundantly,
given that the data it returns is never used anywhere. So drop the call.

Cc: <stable@vger.kernel.org> # v4.14+
Fixes: 24d7c494 ("efi/arm-stub: Round up FDT allocation to mapping size")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Even though it is unlikely to ever make a difference, let's use u32
consistently for the size of the load_options provided by the firmware
(aka the command line)

While at it, do some general cleanup too: use efi_char16_t, avoid using
options_chars in places where it really means options_size, etc.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Wire up the generic EFI zboot support for arm64.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

Wire up the generic EFI zboot support for LoongArch64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Wire up the generic EFI zboot support for RISC-V.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>

Implement a minimal EFI app that decompresses the real kernel image and
launches it using the firmware's LoadImage and StartImage boot services.
This removes the need for any arch-specific hacks.

Note that on systems that have UEFI secure boot policies enabled,
LoadImage/StartImage require images to be signed, or their hashes known
a priori, in order to be permitted to boot.

There are various possible strategies to work around this requirement,
but they all rely either on overriding internal PI/DXE protocols (which
are not part of the EFI spec) or omitting the firmware provided
LoadImage() and StartImage() boot services, which is also undesirable,
given that they encapsulate platform specific policies related to secure
boot and measured boot, but also related to memory permissions (whether
or not and which types of heap allocations have both write and execute
permissions.)

The only generic and truly portable way around this is to simply sign
both the inner and the outer image with the same key/cert pair, so this
is what is implemented here.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

To avoid pulling in the wrong object when using the libstub static
library to build the decompressor, define efi_system_table in a separate
compilation unit.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The stub is used in different execution environments, but on arm64,
RISC-V and LoongArch, we still use the core kernel's implementation of
memcpy and memset, as they are just a branch instruction away, and can
generally be reused even from code such as the EFI stub that runs in a
completely different address space.

KAsan complicates this slightly, resulting in the need for some hacks to
expose the uninstrumented, __ prefixed versions as the normal ones, as
the latter are instrumented to include the KAsan checks, which only work
in the core kernel.

Unfortunately, #define'ing memcpy to __memcpy when building C code does
not guarantee that no explicit memcpy() calls will be emitted. And with
the upcoming zboot support, which consists of a separate binary which
therefore needs its own implementation of memcpy/memset anyway, it's
better to provide one explicitly instead of linking to the existing one.

Given that EFI exposes implementations of memmove() and memset() via the
boot services table, let's wire those up in the appropriate way, and
drop the references to the core kernel ones.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Define the correct prototypes for the load_image, start_image and
unload_image boot service pointers so we can call them from the EFI
zboot code.

Also add some prototypes related to installation and deinstallation of
protocols in to the EFI protocol database, including some definitions
related to device paths.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

EFI boot support for loongarch

This patch adds efistub booting support, which is the standard UEFI boot
protocol for LoongArch to use.

We use generic efistub, which means we can pass boot information (i.e.,
system table, memory map, kernel command line, initrd) via a light FDT
and drop a lot of non-standard code.

We use a flat mapping to map the efi runtime in the kernel's address
space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result,
flat mapping is not identity mapping, SetVirtualAddressMap() is still
needed for the efi runtime.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[ardb: change fpic to fpie as suggested by Xi Ruoyao]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Move the EFI mixed mode return trampoline RET into .rodata, so it is
normally mapped without executable permissions.  And given that this
snippet of code is really the only kernel code that we ever execute via
this 1:1 mapping, let's unmap the 1:1 mapping of the kernel .text, and
only map the page that covers the return trampoline with executable
permissions.

Note that the remainder of .rodata needs to remain mapped into the 1:1
mapping with RO/NX permissions, as literal GUIDs and strings may be
passed to the variable routines.
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.

Fixes powerpc allmodconfig build:

   In file included from include/linux/nodemask.h:97,
                    from include/linux/mmzone.h:17,
                    from include/linux/gfp.h:7,
                    from include/linux/radix-tree.h:12,
                    from include/linux/idr.h:15,
                    from include/linux/kernfs.h:12,
                    from include/linux/sysfs.h:16,
                    from include/linux/kobject.h:20,
                    from include/linux/pci.h:35,
                    from arch/powerpc/kernel/prom_init.c:24:
   include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
      25 |         add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
         |                                              ^~~~~~~~~~~~~~
         |                                              add_latent_entropy
   include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull vfs lseek fix from Al Viro:
 "Fix proc_reg_llseek() breakage. Always had been possible if somebody
  left NULL ->proc_lseek, became a practical issue now"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  take care to handle NULL ->proc_lseek()

Easily done now, just by clearing FMODE_LSEEK in ->f_mode
during proc_reg_open() for such entries.

Fixes: 868941b1 "fs: remove no_llseek"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull more xen updates from Juergen Gross:

 - fix the handling of the "persistent grants" feature negotiation
   between Xen blkfront and Xen blkback drivers

 - a cleanup of xen.config and adding xen.config to Xen section in
   MAINTAINERS

 - support HVMOP_set_evtchn_upcall_vector, which is more compliant to
   "normal" interrupt handling than the global callback used up to now

 - further small cleanups

* tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections
  xen: remove XEN_SCRUB_PAGES in xen.config
  xen/pciback: Fix comment typo
  xen/xenbus: fix return type in xenbus_file_read()
  xen-blkfront: Apply 'feature_persistent' parameter when connect
  xen-blkback: Apply 'feature_persistent' parameter when connect
  xen-blkback: fix persistent grants negotiation
  x86/xen: Add support for HVMOP_set_evtchn_upcall_vector

Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tool updates from Arnaldo Carvalho de Melo:

 - 'perf c2c' now supports ARM64, adjust its output to cope with
   differences with what is in x86_64. Now go find false sharing on
   ARM64 (at least Neoverse) as well!

 - Refactor the JSON processing, making the output more compact and thus
   reducing the size of the resulting perf binary

 - Improvements for 'perf offcpu' profiling, including tracking child
   processes

 - Update Intel JSON metrics and events files for broadwellde,
   broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
   knightslanding, sapphirerapids, skylakex and snowridgex

 - Add 'perf stat' JSON output and a 'perf test' entry for it

 - Ignore memfd and anonymous mmap events if jitdump present

 - Refactor 'perf test' shell tests allowing subdirs

 - Fix an error handling path in 'parse_perf_probe_command()'

 - Fixes for the guest Intel PT tracing patchkit in the 1st batch of
   this merge window

 - Print debuginfod queries if -v option is used, to explain delays in
   processing when debuginfo servers are enabled to fetch DSOs with
   richer symbol tables

 - Improve error message for 'perf record -p not_existing_pid'

 - Fix openssl and libbpf feature detection

 - Add PMU pai_crypto event description for IBM z16 on 'perf list'

 - Fix typos and duplicated words on comments in various places

* tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
  perf test: Refactor shell tests allowing subdirs
  perf vendor events: Update events for snowridgex
  perf vendor events: Update events and metrics for skylakex
  perf vendor events: Update metrics for sapphirerapids
  perf vendor events: Update events for knightslanding
  perf vendor events: Update metrics for jaketown
  perf vendor events: Update metrics for ivytown
  perf vendor events: Update events and metrics for icelakex
  perf vendor events: Update events and metrics for haswellx
  perf vendor events: Update events and metrics for cascadelakex
  perf vendor events: Update events and metrics for broadwellx
  perf vendor events: Update metrics for broadwellde
  perf jevents: Fold strings optimization
  perf jevents: Compress the pmu_events_table
  perf metrics: Copy entire pmu_event in find metric
  perf pmu-events: Hide the pmu_events
  perf pmu-events: Don't assume pmu_event is an array
  perf pmu-events: Move test events/metrics to JSON
  perf test: Use full metric resolution
  perf pmu-events: Hide pmu_events_map
  ...

Pull powerpc fixes from Michael Ellerman:

 - Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit
   CPUs trap on it rather than ignoring it as they should.

 - Fix ftrace when building with clang, which was broken by some
   refactoring.

 - A couple of other minor fixes.

Thanks to Christophe Leroy, Naveen N.  Rao, Nick Desaulniers, Ondrej
Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool.

* tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/kexec: Fix build failure from uninitialised variable
  powerpc/ppc-opcode: Fix PPC_RAW_TW()
  powerpc64/ftrace: Fix ftrace for clang builds
  powerpc: Make eh value more explicit when using lwarx
  powerpc: Don't hide eh field of lwarx behind a macro
  powerpc: Fix eh field when calling lwarx on PPC32

Pull /proc/mounts fix from Al Viro:
 "Fix for /proc/mounts escaping - escape the '#' character too"

* tag 'pull-work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: escape hash as well

Pull more cifs updates from Steve French:

 - two fixes for stable, one for a lock length miscalculation, and
   another fixes a lease break timeout bug

 - improvement to handle leases, allows the close timeout to be
   configured more safely

 - five restructuring/cleanup patches

* tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Do not access tcon->cfids->cfid directly from is_path_accessible
  cifs: Add constructor/destructors for tcon->cfid
  SMB3: fix lease break timeout when multiple deferred close handles for the same file.
  smb3: allow deferred close timeout to be configurable
  cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir
  cifs: Move cached-dir functions into a separate file
  cifs: Remove {cifs,nfs}_fscache_release_page()
  cifs: fix lock length calculation

Enable multipage folio support for the afs filesystem.

Support has already been implemented in netfslib, fscache and cachefiles
and in most of afs, but I've waited for Matthew Wilcox's latest folio
changes.

Note that it does require a change to afs_write_begin() to return the
correct subpage.  This is a "temporary" change as we're working on
getting rid of the need for ->write_begin() and ->write_end()
completely, at least as far as network filesystems are concerned - but
it doesn't prevent afs from making use of the capability.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: kafs-testing@auristor.com
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull timer fixes from Ingo Molnar:
 "Misc timer fixes:

   - fix a potential use-after-free bug in posix timers

   - correct a prototype

   - address a build warning"

* tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Cleanup CPU timers before freeing them during exec
  time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64
  posix-timers: Make do_clock_gettime() static

Pull x86 fix from Ingo Molnar:
 "Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not
  turned on by default), which also need STIBP enabled (if available) to
  be '100% safe' on even the shortest speculation windows"

* tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/bugs: Enable STIBP for IBPB mitigated RETBleed

Pull more i2c updates from Wolfram Sang:

 - two driver fixes for issues introduced this cycle

 - one trivial driver improvement regarding ACPI

 - more DTS conversion and additions

 - documentation updates

 - subsystem-wide move from strlcpy to strscpy

* tag 'i2c-for-5.20-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  docs: i2c: i2c-sysfs: fix hyperlinks
  docs: i2c: i2c-sysfs: improve wording
  docs: i2c: instantiating-devices: add syntax coloring to dts and C blocks
  docs: i2c: smbus-protocol: improve DataLow/DataHigh definition
  docs: i2c: i2c-protocol: remove unused legend items
  docs: i2c: i2c-protocol,smbus-protocol: remove nonsense words
  docs: i2c: i2c-protocol: update introductory paragraph
  i2c: move core from strlcpy to strscpy
  i2c: move drivers from strlcpy to strscpy
  i2c: kempld: Support ACPI I2C device declaration
  i2c: mediatek: add i2c compatible for MT8188
  dt-bindings: i2c: update bindings for mt8188 soc
  i2c: microchip-corei2c: fix erroneous late ack send
  dt-bindings: i2c: qcom,i2c-cci: convert to dtschema
  i2c: qcom-geni: Fix GPI DMA buffer sync-back

Pull NTB updates from Jon Mason:
 "Non-Transparent Bridge updates.

  Fix of heap data and clang warnings, support for a new Intel NTB
  device, and NTB EndPoint Function (EPF) support and the various fixes
  for that"

* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
  MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
  NTB: EPF: Tidy up some bounds checks
  NTB: EPF: Fix error code in epf_ntb_bind()
  PCI: endpoint: pci-epf-vntb: reduce several globals to statics
  PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
  PCI: endpoint: Fix Kconfig dependency
  NTB: EPF: set pointer addr to null using NULL rather than 0
  Documentation: PCI: extend subheading underline for "lspci output" section
  Documentation: PCI: Use code-block block for scratchpad registers diagram
  Documentation: PCI: Add specification for the PCI vNTB function device
  PCI: endpoint: Support NTB transfer between RC and EP
  NTB: epf: Allow more flexibility in the memory BAR map method
  PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
  ntb: intel: add GNR support for Intel PCIe gen5 NTB
  NTB: ntb_tool: uninitialized heap data in tool_fn_write()
  ntb: idt: fix clang -Wformat warnings

Pull more xfs updates from Darrick Wong:
 "There's not a lot this time around, just the usual bug fixes and
  corrections for missing error returns.

   - Return error codes from block device flushes to userspace

   - Fix a deadlock between reclaim and mount time quotacheck

   - Fix an unnecessary ENOSPC return when doing COW on a filesystem
     with severe free space fragmentation

   - Fix a miscalculation in the transaction reservation computations
     for file removal operations"

* tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix inode reservation space for removing transaction
  xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork
  xfs: fix intermittent hang during quotacheck
  xfs: check return codes when flushing block devices

Pull more SCSI updates from James Bottomley:
 "Mostly small bug fixes and trivial updates.

  The major new core update is a change to the way device, target and
  host reference counting is done to try to make it more robust (this
  change has soaked for a while to try to winkle out any bugs)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: pm8001: Fix typo 'the the' in comment
  scsi: megaraid_sas: Remove redundant variable cmd_type
  scsi: FlashPoint: Remove redundant variable bm_int_st
  scsi: zfcp: Fix missing auto port scan and thus missing target ports
  scsi: core: Call blk_mq_free_tag_set() earlier
  scsi: core: Simplify LLD module reference counting
  scsi: core: Make sure that hosts outlive targets
  scsi: core: Make sure that targets outlive devices
  scsi: ufs: ufs-pci: Correct check for RESET DSM
  scsi: target: core: De-RCU of se_lun and se_lun acl
  scsi: target: core: Fix race during ACL removal
  scsi: ufs: core: Correct ufshcd_shutdown() flow
  scsi: ufs: core: Increase the maximum data buffer size
  scsi: lpfc: Check the return value of alloc_workqueue()

Pull block fixes from Jens Axboe:

 - NVMe pull request
     - print nvme connect Linux error codes properly (Amit Engel)
     - fix the fc_appid_store return value (Christoph Hellwig)
     - fix a typo in an error message (Christophe JAILLET)
     - add another non-unique identifier quirk (Dennis P. Kliem)
     - check if the queue is allocated before stopping it in nvme-tcp
       (Maurizio Lombardi)
     - restart admin queue if the caller needs to restart queue in
       nvme-fc (Ming Lei)
     - use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
       Xiaoxu)

 - __alloc_disk_node() error handling fix (Rafael)

* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
  block: Do not call blk_put_queue() if gendisk allocation fails
  nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
  nvme-tcp: check if the queue is allocated before stopping it
  nvme-fabrics: Fix a typo in an error message
  nvme-fabrics: parse nvme connect Linux error codes
  nvmet-auth: use kmemdup instead of kmalloc + memcpy
  nvme-fc: fix the fc_appid_store return value
  nvme-fc: restart admin queue if the caller needs to restart queue