- 01 Feb, 2021 11 commits
-
-
Yoshihiro Shimoda authored
Add pre_req and post_req support to improve performance. Inspired by a patch in the BSP by Masaharu Hayakawa. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/1608114572-1892-3-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Takeshi Saito authored
According to the latest datasheet, the internal DMAC buffer alignment R-Car Gen3 SDHI HW should be 128-bytes. So, fix it. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [shimoda: revise commit description, rebase] Fixes: 2a68ea78 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/1608114572-1892-2-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Douglas Anderson authored
The MSM SDHCI driver always set the "actual_clock" field to 0. It had a comment about it not being needed because we weren't using the standard SDHCI divider mechanism and we'd just fallback to "host->clock". However, it's still better to provide the actual clock. Why? 1. It will make timeout calculations slightly better. On one system I have, the eMMC requets 200 MHz (for HS400-ES) but actually gets 192 MHz. These are close, but why not get the more accurate one. 2. If things are seriously off in the clock driver and it's missing rates or picking the wrong rate (maybe it's rounding up instead of down), this will make it much more obvious what's going on. NOTE: we have to be a little careful here because the "actual_clock" field shouldn't include the multiplier that sdhci-msm needs internally. Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/20201214092048.v5.2.I7564620993acd4baa63fa0e3925ca879a86d3ee3@changeidSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Douglas Anderson authored
As talked about in commit 5e4b7e82 ("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks"), most clocks handled by the Qualcomm clock drivers are rounded _up_ by default instead of down. We should make sure SD/MMC clocks are always rounded down in the clock drivers. Let's add a warning in the Qualcomm SDHCI driver to help catch the problem. This would have saved a bunch of time [1]. NOTE: this doesn't actually fix any problems, it just makes it obvious to devs that there is a problem and that should be an indication to fix the clock driver. [1] http://lore.kernel.org/r/20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeidSuggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20201214092048.v5.1.Iec3430c7d3c2a29262695edef7b82a14aaa567e5@changeidSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Yangtao Li authored
This patch adds support for A100 MMC controller, which use word address for internal dma. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20201211011934.6171-10-andre.przywara@arm.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Yangtao Li authored
Add binding for A100's and H616's mmc and emmc controller. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20201211011934.6171-9-andre.przywara@arm.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Jisheng Zhang authored
The SDHCI_PRESET_FOR_* registers are not set(all read as zeros), so set the quirk. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20201210165510.76b917e5@xhacker.debianSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Christophe JAILLET authored
A call to 'ausdhi6_dma_release()' to undo a previous call to 'usdhi6_dma_request()' is missing in the error handling path of the probe function. It is already present in the remove function. Fixes: 75fa9ea6 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201217210922.165340-1-christophe.jaillet@wanadoo.frSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Christophe JAILLET authored
'sdhci_remove_host()' and 'sdhci_pltfm_free()' should be used in place of 'mmc_remove_host()' and 'mmc_free_host()'. This avoids some resource leaks, is more in line with the error handling path of the probe function, and is more consistent with other drivers. Fixes: fb8bd90f ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Orson Zhai <orson.zhai@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20201217204236.163446-1-christophe.jaillet@wanadoo.frSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Christophe JAILLET authored
'dma_request_chan()' calls should be balanced by a corresponding 'dma_release_channel()' call. Add the missing call both in the error handling path of the probe function and in the remove function. Fixes: ff65ffe4 ("mmc: Add Actions Semi Owl SoCs SD/MMC driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201209194202.54099-1-christophe.jaillet@wanadoo.frSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Christophe JAILLET authored
If 'mmc_of_parse()' fails, we must undo the previous 'dma_request_chan()' call. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201208203527.49262-1-christophe.jaillet@wanadoo.frSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
- 31 Jan, 2021 17 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fix from Borislav Petkov: "A single fix from Lukas: handle boolean device properties imported from Apple firmware correctly" * tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/apple-properties: Reinstate support for boolean properties
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Borislav Petkov: "A single fix for objtool to generate proper unwind info for newer toolchains which do not generate section symbols anymore. And a cleanup ontop. This was originally going to go during the next merge window but people can already trigger a build error with binutils-2.36 which doesn't emit section symbols - something which objtool relies on - so let's expedite it" * tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument x86/entry: Emit a symbol for register restoring thunk
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A fix for handling advertised, but non-existent 146818 RTCs correctly. With the recent UIP handling changes the time readout of non-existent RTCs hangs forever as the read returns always 0xFF which means the UIP bit is set. Sanity check the RTC before registering by checking the RTC_VALID register for correctness" * tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtc: mc146818: Detect and handle broken RTCs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull single stepping fix from Thomas Gleixner: "A single fix for the single step reporting regression caused by getting the condition wrong when moving SYSCALL_EMU away from TIF flags" [ There's apparently another problem too, fix pending ] * tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Unbreak single step reporting behaviour
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: "One fix for a bug in our soft interrupt masking, which could lead to interrupt replaying recursing, causing spurious interrupts. Thanks to Nicholas Piggin" * tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fix from Wolfram Sang: "Just one I2C driver update this time" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mediatek: Move suspend and resume handling to NOIRQ phase
-
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-ledsLinus Torvalds authored
Pull LED fixes from Pavel Machek: "This pull is due to 'leds: trigger: fix potential deadlock with libata' -- people find the warn annoying. It also contains new driver and two trivial fixes" * 'for-rc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: rt8515: Add Richtek RT8515 LED driver dt-bindings: leds: Add DT binding for Richtek RT8515 leds: trigger: fix potential deadlock with libata leds: leds-ariel: convert comma to semicolon leds: leds-lm3533: convert comma to semicolon
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Trond Myklebust: - SUNRPC: Handle 0 length opaque XDR object data properly - Fix a layout segment leak in pnfs_layout_process() - pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn - pNFS/NFSv4: Improve rejection of out-of-order layouts - pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process() * tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Handle 0 length opaque XDR object data properly SUNRPC: Move simple_get_bytes and simple_get_netobj into private header pNFS/NFSv4: Improve rejection of out-of-order layouts pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process() pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()
-
Linus Walleij authored
This adds a driver for the Richtek RT8515 dual channel torch/flash white LED driver. This LED driver is found in some mobile phones from Samsung such as the GT-S7710 and GT-I8190. A V4L interface is added. We do not have a proper datasheet for the RT8515 but it turns out that RT9387A has a public datasheet and is essentially the same chip. We designed the driver in accordance with this datasheet. The day someone needs to drive a RT9387A this driver can probably easily be augmented to handle that chip too. Sakari Ailus, Pavel Machek and Andy Shevchenko helped significantly in getting this driver right. Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Cc: linux-media@vger.kernel.org Cc: phone-devel@vger.kernel.org Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
-
Linus Walleij authored
Add a YAML devicetree binding for the Richtek RT8515 dual channel flash/torch LED driver. Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Cc: phone-devel@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
-
Andrea Righi authored
We have the following potential deadlock condition: ======================================================== WARNING: possible irq lock inversion dependency detected 5.10.0-rc2+ #25 Not tainted -------------------------------------------------------- swapper/3/0 just changed the state of lock: ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200 but this lock took another, HARDIRQ-READ-unsafe lock in the past: (&trig->leddev_list_lock){.+.?}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&trig->leddev_list_lock); local_irq_disable(); lock(&host->lock); lock(&trig->leddev_list_lock); <Interrupt> lock(&host->lock); *** DEADLOCK *** no locks held by swapper/3/0. the shortest dependencies between 2nd lock and 1st lock: -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 { HARDIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 IN-SOFTIRQ-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 kbd_bh+0x9e/0xc0 tasklet_action_common.constprop.0+0xe9/0x100 tasklet_action+0x22/0x30 __do_softirq+0xcc/0x46d run_ksoftirqd+0x3f/0x70 smpboot_thread_fn+0x116/0x1f0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 SOFTIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 INITIAL READ USE at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83da4c00>] __key.0+0x0/0x10 ... acquired at: _raw_read_lock+0x42/0x90 led_trigger_blink_oneshot+0x3b/0x90 ledtrig_disk_activity+0x3c/0xa0 ata_qc_complete+0x26/0x450 ata_do_link_abort+0xa3/0xe0 ata_port_freeze+0x2e/0x40 ata_hsm_qc_complete+0x94/0xa0 ata_sff_hsm_move+0x177/0x7a0 ata_sff_pio_task+0xc7/0x1b0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 -> (&host->lock){-...}-{2:2} ops: 69 { IN-HARDIRQ-W at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab INITIAL USE at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_dev_init+0x54/0xe0 ata_link_init+0x8b/0xd0 ata_port_alloc+0x1f1/0x210 ata_host_alloc+0xf1/0x130 ata_host_alloc_pinfo+0x14/0xb0 ata_pci_sff_prepare_host+0x41/0xa0 ata_pci_bmdma_prepare_host+0x14/0x30 piix_init_one+0x21f/0x600 local_pci_probe+0x48/0x80 pci_device_probe+0x105/0x1c0 really_probe+0x221/0x490 driver_probe_device+0xe9/0x160 device_driver_attach+0xb2/0xc0 __driver_attach+0x91/0x150 bus_for_each_dev+0x81/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x138/0x1f0 driver_register+0x91/0xf0 __pci_register_driver+0x73/0x80 piix_init+0x1e/0x2e do_one_initcall+0x5f/0x2d0 kernel_init_freeable+0x26f/0x2cf kernel_init+0xe/0x113 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10 ... acquired at: __lock_acquire+0x9da/0x2370 lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab This lockdep splat is reported after: commit e9181886 ("locking: More accurate annotations for read_lock()") To clarify: - read-locks are recursive only in interrupt context (when in_interrupt() returns true) - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call write_lock(&trig->leddev_list_lock) that would be blocked by CPU0 that holds trig->leddev_list_lock in read-mode - when CPU1 (ata_ac_complete()) tries to read-lock trig->leddev_list_lock, it would be blocked by the write-lock waiter on CPU2 (because we are not in interrupt context, so the read-lock is not recursive) - at this point if an interrupt happens on CPU0 and ata_bmdma_interrupt() is executed it will try to acquire host->lock, that is held by CPU1, that is currently blocked by CPU2, so: * CPU0 blocked by CPU1 * CPU1 blocked by CPU2 * CPU2 blocked by CPU0 *** DEADLOCK *** The deadlock scenario is better represented by the following schema (thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the detailed explanation of the deadlock condition): CPU 0: CPU 1: CPU 2: ----- ----- ----- led_trigger_event(): read_lock(&trig->leddev_list_lock); <workqueue> ata_hsm_qc_complete(): spin_lock_irqsave(&host->lock); write_lock(&trig->leddev_list_lock); ata_port_freeze(): ata_do_link_abort(): ata_qc_complete(): ledtrig_disk_activity(): led_trigger_blink_oneshot(): read_lock(&trig->leddev_list_lock); // ^ not in in_interrupt() context, so could get blocked by CPU 2 <interrupt> ata_bmdma_interrupt(): spin_lock_irqsave(&host->lock); Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so that no interrupt can happen in between, preventing the deadlock condition. Apply the same change to led_trigger_blink_setup() as well, since the same deadlock scenario can also happen in power_supply_update_bat_leds() -> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context), and potentially prevent other similar usages. Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/ Fixes: eb25cb99 ("leds: convert IDE trigger to common disk trigger") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Four cifs patches found in additional testing of the conversion to the new mount API: three small option processing ones, and one fixing domain based DFS referrals" * tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix dfs domain referrals cifs: returning mount parm processing errors correctly cifs: fix mounts to subdirectories of target cifs: ignore auto and noauto options if given
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two minor fixes in drivers. Both changing strings (one in a comment, one in a module help text) with no code impact" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit scsi: target: iscsi: Fix typo in comment
-
git://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC fix from Stafford Horne: "Fix config dependencies for Litex SOC driver causing issues on um" * tag 'for-linus' of git://github.com/openrisc/linux: soc: litex: Properly depend on HAS_IOMEM
-
- 30 Jan, 2021 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Cleanups on properties with standard unit suffixes - Fix overwriting dma_range_map if there's no 'dma-ranges' property - Fix a bug when creating a /chosen node from ARM ATAGs - Add missing properties for TI j721e USB binding - Several doc reference updates due to DT schema conversions * tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Cleanup standard unit properties of/device: Update dma_range_map only when dev has valid dma-ranges ARM: zImage: atags_to_fdt: Fix node names on added root nodes dt-bindings: usb: j721e: add ranges and dma-coherent props dt-bindings:iio:adc: update adc.yaml reference dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references dt-bindings: display: mediatek: update mediatek,dpi.yaml reference ASoC: audio-graph-card: update audio-graph-card.yaml reference
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - Fix max number of VCPUs reported via ultravisor information sysfs interface. - Fix memory leaks during vfio-ap resources clean up on KVM pointer invalidation notification. - Fix potential specification exception by avoiding unnecessary interrupts disable after queue reset in vfio-ap. * tag 's390-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: uv: Fix sysfs max number of VCPUs reporting s390/vfio-ap: No need to disable IRQ after queue reset s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "A fix to avoid initializing max_mapnr to be too large, which may manifest on NUMA systems" * tag 'riscv-for-linus-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fixup pfn_valid error with wrong max_mapnr
-
- 29 Jan, 2021 9 commits
-
-
Rob Herring authored
Properties with standard unit suffixes already have a type and don't need type definitions. They also default to a single entry, so 'maxItems: 1' can be dropped. adi,ad5758 is an oddball which defined an enum of arrays. While a valid schema, it is simpler as a whole to only define scalar constraints. Cc: Jean Delvare <jdelvare@suse.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-input@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-watchdog@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses. - Do not blindly trust the DMA masks from ACPI/IORT. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ACPI/IORT: Do not blindly trust DMA masks from firmware arm64: Fix kernel address detection of __is_lm_address()
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A few more fixes for a late rc: - fix lockdep complaint on 32bit arches and also remove an unsafe memory use due to device vs filesystem lifetime - two fixes for free space tree: * race during log replay and cache rebuild, now more likely to happen due to changes in this dev cycle * possible free space tree corruption with online conversion during initial tree population" * tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix log replay failure due to race with space cache rebuild btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch btrfs: fix possible free space tree corruption with online conversion
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "All over the place fixes for this release: - blk-cgroup iteration teardown resched fix (Baolin) - NVMe pull request from Christoph: - add another Write Zeroes quirk (Chaitanya Kulkarni) - handle a no path available corner case (Daniel Wagner) - use the proper RCU aware list_add helper (Chao Leng) - bcache regression fix (Coly) - bdev->bd_size_lock IRQ fix. This will be fixed in drivers for 5.12, but for now, we'll make it IRQ safe (Damien) - null_blk zoned init fix (Damien) - add_partition() error handling fix (Dinghao) - s390 dasd kobject fix (Jan) - nbd fix for freezing queue while adding connections (Josef) - tag queueing regression fix (Ming) - revert of a patch that inadvertently meant that we regressed write performance on raid (Maxim)" * tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block: null_blk: cleanup zoned mode initialization nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head nvme-multipath: Early exit if no path is available nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES block: fix bd_size_lock use blk-cgroup: Use cond_resched() when destroy blkgs Revert "block: simplify set_init_blocksize" to regain lost performance nbd: freeze the queue while we're adding connections s390/dasd: Fix inconsistent kobject removal block: Fix an error handling in add_partition blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "We got the cancelation story sorted now, so for all intents and purposes, this should be it for 5.11 outside of any potential little fixes that may come in. This contains: - task_work task state fixes (Hao, Pavel) - Cancelation fixes (me, Pavel) - Fix for an inflight req patch in this release (Pavel) - Fix for a lock deadlock issue (Pavel)" * tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block: io_uring: reinforce cancel on flush during exit io_uring: fix sqo ownership false positive warning io_uring: fix list corruption for splice file_get io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE io_uring: fix wqe->lock/completion_lock deadlock io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE io_uring: only call io_cqring_ev_posted() if events were posted io_uring: if we see flush on exit, cancel related tasks
-
David Gow authored
The LiteX SOC controller driver makes use of IOMEM functions like devm_platform_ioremap_resource(), which are only available if CONFIG_HAS_IOMEM is defined. This causes the driver to be enable under make ARCH=um allyesconfig, even though it won't build. By adding a dependency on HAS_IOMEM, the driver will not be enabled on architectures which don't support it. Fixes: 22447a99 ("drivers/soc/litex: add LiteX SoC Controller driver") Signed-off-by: David Gow <davidgow@google.com> [shorne@gmail.com: Fix typo in commit message pointed out in review] Signed-off-by: Stafford Horne <shorne@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - AMD IOMMU fix to make sure features are detected before they are queried. - Intel IOMMU address alignment check fix for an IOLTB flushing command. - Performance fix for Intel IOMMU to make sure the code does not do full IOTLB flushes all the time. Those flushes are very expensive on emulated IOMMUs. * tag 'iommu-fixes-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Do not use flush-queue when caching-mode is on iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid() iommu/amd: Use IVHD EFR for early initialization of IOMMU features
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix a deadlock in the 'kexec jump' code and address a possible hibernation image creation issue. Specifics: - Fix a deadlock caused by attempting to acquire the same mutex twice in a row in the "kexec jump" code (Baoquan He) - Modify the hibernation image saving code to flush the unwritten data to the swap storage later so as to avoid failing to write the image signature which is possible in some cases (Laurent Badel)" * tag 'pm-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: hibernate: flush swap writer after marking kernel: kexec: remove the lock operation of system_transition_mutex
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These fix the handling of notifications in the ACPI thermal driver and address a device enumeration issue leading to the presence of multiple 'MODALIAS=' entries in one uevent file in sysfs in some cases. Specifics: - Modify the ACPI thermal driver to avoid evaluating _TMP directly in its Notify () handler callback and running too many thermal checks for one thermal zone at the same time so as to address a work item accumulation issue observed on some systems that fail to shut down as a result of it (Rafael Wysocki) - Modify the ACPI uevent file creation code to avoid putting multiple 'MODALIAS=' entries in one uevent file in sysfs which breaks systemd-udevd (Kai-Heng Feng)" * tag 'acpi-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: thermal: Do not call acpi_thermal_check() directly ACPI: sysfs: Prefer "compatible" modalias
-