- 22 Oct, 2019 11 commits
-
-
Nicholas Piggin authored
kvmppc_inject_interrupt does not implement LPCR[AIL]!=0 modes, which can result in the guest receiving interrupts as if LPCR[AIL]=0 contrary to the ISA. In practice, Linux guests cope with this deviation, but it should be fixed. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Nicholas Piggin authored
This consolidates the HV interrupt delivery logic into one place. Signed-off-by:
-
Nicholas Piggin authored
reset_msr sets the MSR for interrupt injection, but it's cleaner and more flexible to provide a single op to set both MSR and PC for the interrupt. Signed-off-by:
-
Nicholas Piggin authored
Acked-by:
-
Greg Kurz authored
Add a new attribute to both XIVE and XICS-on-XIVE KVM devices so that userspace can tell how many interrupt servers it needs. If a VM needs less than the current default of KVM_MAX_VCPUS (2048), we can allocate less VPs in OPAL. Combined with a core stride (VSMT) that matches the number of guest threads per core, this may substantially increases the number of VMs that can run concurrently with an in-kernel XIVE device. Since the legacy XIVE KVM device is exposed to userspace through the XICS KVM API, a new attribute group is added to it for this purpose. While here, fix the syntax of the existing KVM_DEV_XICS_GRP_SOURCES in the XICS documentation. Signed-off-by:
Greg Kurz <groug@kaod.org> Reviewed-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
-
Greg Kurz authored
The XIVE VP is an internal structure which allow the XIVE interrupt controller to maintain the interrupt context state of vCPUs non dispatched on HW threads. When a guest is started, the XIVE KVM device allocates a block of XIVE VPs in OPAL, enough to accommodate the highest possible vCPU id KVM_MAX_VCPU_ID (16384) packed down to KVM_MAX_VCPUS (2048). With a guest's core stride of 8 and a threading mode of 1 (QEMU's default), a VM must run at least 256 vCPUs to actually need such a range of VPs. A POWER9 system has a limited XIVE VP space : 512k and KVM is currently wasting this HW resource with large VP allocations, especially since a typical VM likely runs with a lot less vCPUs. Make the size of the VP block configurable. Add an nr_servers field to the XIVE structure and a function to set it for this purpose. Split VP allocation out of the device create function. Since the VP block isn't used before the first vCPU connects to the XIVE KVM device, allocation is now performed by kvmppc_xive_connect_vcpu(). This gives the opportunity to set nr_servers in between: kvmppc_xive_create() / kvmppc_xive_native_create() . . kvmppc_xive_set_nr_servers() . . kvmppc_xive_connect_vcpu() / kvmppc_xive_native_connect_vcpu() The connect_vcpu() functions check that the vCPU id is below nr_servers and if it is the first vCPU they allocate the VP block. This is protected against a concurrent update of nr_servers by kvmppc_xive_set_nr_servers() with the xive->lock mutex. Also, the block is allocated once for the device lifetime: nr_servers should stay constant otherwise connect_vcpu() could generate a boggus VP id and likely crash OPAL. It is thus forbidden to update nr_servers once the block is allocated. If the VP allocation fail, return ENOSPC which seems more appropriate to report the depletion of system wide HW resource than ENOMEM or ENXIO. A VM using a stride of 8 and 1 thread per core with 32 vCPUs would hence only need 256 VPs instead of 2048. If the stride is set to match the number of threads per core, this goes further down to 32. This will be exposed to userspace by a subsequent patch. Signed-off-by: -
Greg Kurz authored
Reduce code duplication by consolidating the checking of vCPU ids and VP ids to a common helper used by both legacy and native XIVE KVM devices. And explain the magic with a comment. Signed-off-by:
-
Greg Kurz authored
Print out the VP id of each connected vCPU, this allow to see: - the VP block base in which OPAL encodes information that may be useful when debugging - the packed vCPU id which may differ from the raw vCPU id if the latter is >= KVM_MAX_VCPUS (2048) Signed-off-by:
-
Greg Kurz authored
If we cannot allocate the XIVE VPs in OPAL, the creation of a XIVE or XICS-on-XIVE device is aborted as expected, but we leave kvm->arch.xive set forever since the release method isn't called in this case. Any subsequent tentative to create a XIVE or XICS-on-XIVE for this VM will thus always fail (DoS). This is a problem for QEMU since it destroys and re-creates these devices when the VM is reset: the VM would be restricted to using the much slower emulated XIVE or XICS forever. As an alternative to adding rollback, do not assign kvm->arch.xive before making sure the XIVE VPs are allocated in OPAL. Cc: stable@vger.kernel.org # v5.2 Fixes: 5422e951 ("KVM: PPC: Book3S HV: XIVE: Replace the 'destroy' method by a 'release' method") Signed-off-by:
-
Leonardo Bras authored
Given that in kvm_create_vm() there is: kvm->mm = current->mm; And that on every kvm_*_ioctl we have: if (kvm->mm != current->mm) return -EIO; I see no reason to keep using current->mm instead of kvm->mm. By doing so, we would reduce the use of 'global' variables on code, relying more in the contents of kvm struct. Signed-off-by:
Leonardo Bras <leonardo@linux.ibm.com> Signed-off-by:
-
Leonardo Bras authored
Reduces the number of calls to get_current() in order to get the value of current->mm by doing it once and storing the value, since it is not supposed to change inside the same process). Signed-off-by:
-
- 21 Oct, 2019 1 commit
-
-
Fabiano Rosas authored
When calling the KVM_SET_GUEST_DEBUG ioctl, userspace might request the next instruction to be single stepped via the KVM_GUESTDBG_SINGLESTEP control bit of the kvm_guest_debug structure. This patch adds the KVM_CAP_PPC_GUEST_DEBUG_SSTEP capability in order to inform userspace about the state of single stepping support. We currently don't have support for guest single stepping implemented in Book3S HV so the capability is only present for Book3S PR and BookE. Signed-off-by:
Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by:
-
- 15 Oct, 2019 1 commit
-
-
Greg Kurz authored
Connecting a vCPU to a XIVE KVM device means establishing a 1:1 association between a vCPU id and the offset (VP id) of a VP structure within a fixed size block of VPs. We currently try to enforce the 1:1 relationship by checking that a vCPU with the same id isn't already connected. This is good but unfortunately not enough because we don't map VP ids to raw vCPU ids but to packed vCPU ids, and the packing function kvmppc_pack_vcpu_id() isn't bijective by design. We got away with it because QEMU passes vCPU ids that fit well in the packing pattern. But nothing prevents userspace to come up with a forged vCPU id resulting in a packed id collision which causes the KVM device to associate two vCPUs to the same VP. This greatly confuses the irq layer and ultimately crashes the kernel, as shown below. Example: a guest with 1 guest thread per core, a core stride of 8 and 300 vCPUs has vCPU ids 0,8,16...2392. If QEMU is patched to inject at some point an invalid vCPU id 348, which is the packed version of itself and 2392, we get: genirq: Flags mismatch irq 199. 00010000 (kvm-2-2392) vs. 00010000 (kvm-2-348) CPU: 24 PID: 88176 Comm: qemu-system-ppc Not tainted 5.3.0-xive-nr-servers-5.3-gku+ #38 Call Trace: [c000003f7f9937e0] [c000000000c0110c] dump_stack+0xb0/0xf4 (unreliable) [c000003f7f993820] [c0000000001cb480] __setup_irq+0xa70/0xad0 [c000003f7f9938d0] [c0000000001cb75c] request_threaded_irq+0x13c/0x260 [c000003f7f993940] [c00800000d44e7ac] kvmppc_xive_attach_escalation+0x104/0x270 [kvm] [c000003f7f9939d0] [c00800000d45013c] kvmppc_xive_connect_vcpu+0x424/0x620 [kvm] [c000003f7f993ac0] [c00800000d444428] kvm_arch_vcpu_ioctl+0x260/0x448 [kvm] [c000003f7f993b90] [c00800000d43593c] kvm_vcpu_ioctl+0x154/0x7c8 [kvm] [c000003f7f993d00] [c0000000004840f0] do_vfs_ioctl+0xe0/0xc30 [c000003f7f993db0] [c000000000484d44] ksys_ioctl+0x104/0x120 [c000003f7f993e00] [c000000000484d88] sys_ioctl+0x28/0x80 [c000003f7f993e20] [c00000000000b278] system_call+0x5c/0x68 xive-kvm: Failed to request escalation interrupt for queue 0 of VCPU 2392 ------------[ cut here ]------------ remove_proc_entry: removing non-empty directory 'irq/199', leaking at least 'kvm-2-348' WARNING: CPU: 24 PID: 88176 at /home/greg/Work/linux/kernel-kvm-ppc/fs/proc/generic.c:684 remove_proc_entry+0x1ec/0x200 Modules linked in: kvm_hv kvm dm_mod vhost_net vhost tap xt_CHECKSUM iptable_mangle xt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter squashfs loop fuse i2c_dev sg ofpart ocxl powernv_flash at24 xts mtd uio_pdrv_genirq vmx_crypto opal_prd ipmi_powernv uio ipmi_devintf ipmi_msghandler ibmpowernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables ext4 mbcache jbd2 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq libcrc32c raid1 raid0 linear sd_mod ast i2c_algo_bit drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci libata tg3 drm_panel_orientation_quirks [last unloaded: kvm] CPU: 24 PID: 88176 Comm: qemu-system-ppc Not tainted 5.3.0-xive-nr-servers-5.3-gku+ #38 NIP: c00000000053b0cc LR: c00000000053b0c8 CTR: c0000000000ba3b0 REGS: c000003f7f9934b0 TRAP: 0700 Not tainted (5.3.0-xive-nr-servers-5.3-gku+) MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 48228222 XER: 20040000 CFAR: c000000000131a50 IRQMASK: 0 GPR00: c00000000053b0c8 c000003f7f993740 c0000000015ec500 0000000000000057 GPR04: 0000000000000001 0000000000000000 000049fb98484262 0000000000001bcf GPR08: 0000000000000007 0000000000000007 0000000000000001 9000000000001033 GPR12: 0000000000008000 c000003ffffeb800 0000000000000000 000000012f4ce5a1 GPR16: 000000012ef5a0c8 0000000000000000 000000012f113bb0 0000000000000000 GPR20: 000000012f45d918 c000003f863758b0 c000003f86375870 0000000000000006 GPR24: c000003f86375a30 0000000000000007 c0002039373d9020 c0000000014c4a48 GPR28: 0000000000000001 c000003fe62a4f6b c00020394b2e9fab c000003fe62a4ec0 NIP [c00000000053b0cc] remove_proc_entry+0x1ec/0x200 LR [c00000000053b0c8] remove_proc_entry+0x1e8/0x200 Call Trace: [c000003f7f993740] [c00000000053b0c8] remove_proc_entry+0x1e8/0x200 (unreliable) [c000003f7f9937e0] [c0000000001d3654] unregister_irq_proc+0x114/0x150 [c000003f7f993880] [c0000000001c6284] free_desc+0x54/0xb0 [c000003f7f9938c0] [c0000000001c65ec] irq_free_descs+0xac/0x100 [c000003f7f993910] [c0000000001d1ff8] irq_dispose_mapping+0x68/0x80 [c000003f7f993940] [c00800000d44e8a4] kvmppc_xive_attach_escalation+0x1fc/0x270 [kvm] [c000003f7f9939d0] [c00800000d45013c] kvmppc_xive_connect_vcpu+0x424/0x620 [kvm] [c000003f7f993ac0] [c00800000d444428] kvm_arch_vcpu_ioctl+0x260/0x448 [kvm] [c000003f7f993b90] [c00800000d43593c] kvm_vcpu_ioctl+0x154/0x7c8 [kvm] [c000003f7f993d00] [c0000000004840f0] do_vfs_ioctl+0xe0/0xc30 [c000003f7f993db0] [c000000000484d44] ksys_ioctl+0x104/0x120 [c000003f7f993e00] [c000000000484d88] sys_ioctl+0x28/0x80 [c000003f7f993e20] [c00000000000b278] system_call+0x5c/0x68 Instruction dump: 2c230000 41820008 3923ff78 e8e900a0 3c82ff69 3c62ff8d 7fa6eb78 7fc5f378 3884f080 3863b948 4bbf6925 60000000 <0fe00000> 4bffff7c fba10088 4bbf6e41 ---[ end trace b925b67a74a1d8d1 ]--- BUG: Kernel NULL pointer dereference at 0x00000010 Faulting instruction address: 0xc00800000d44fc04 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: kvm_hv kvm dm_mod vhost_net vhost tap xt_CHECKSUM iptable_mangle xt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter squashfs loop fuse i2c_dev sg ofpart ocxl powernv_flash at24 xts mtd uio_pdrv_genirq vmx_crypto opal_prd ipmi_powernv uio ipmi_devintf ipmi_msghandler ibmpowernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables ext4 mbcache jbd2 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq libcrc32c raid1 raid0 linear sd_mod ast i2c_algo_bit drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci libata tg3 drm_panel_orientation_quirks [last unloaded: kvm] CPU: 24 PID: 88176 Comm: qemu-system-ppc Tainted: G W 5.3.0-xive-nr-servers-5.3-gku+ #38 NIP: c00800000d44fc04 LR: c00800000d44fc00 CTR: c0000000001cd970 REGS: c000003f7f9938e0 TRAP: 0300 Tainted: G W (5.3.0-xive-nr-servers-5.3-gku+) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24228882 XER: 20040000 CFAR: c0000000001cd9ac DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0 GPR00: c00800000d44fc00 c000003f7f993b70 c00800000d468300 0000000000000000 GPR04: 00000000000000c7 0000000000000000 0000000000000000 c000003ffacd06d8 GPR08: 0000000000000000 c000003ffacd0738 0000000000000000 fffffffffffffffd GPR12: 0000000000000040 c000003ffffeb800 0000000000000000 000000012f4ce5a1 GPR16: 000000012ef5a0c8 0000000000000000 000000012f113bb0 0000000000000000 GPR20: 000000012f45d918 00007ffffe0d9a80 000000012f4f5df0 000000012ef8c9f8 GPR24: 0000000000000001 0000000000000000 c000003fe4501ed0 c000003f8b1d0000 GPR28: c0000033314689c0 c000003fe4501c00 c000003fe4501e70 c000003fe4501e90 NIP [c00800000d44fc04] kvmppc_xive_cleanup_vcpu+0xfc/0x210 [kvm] LR [c00800000d44fc00] kvmppc_xive_cleanup_vcpu+0xf8/0x210 [kvm] Call Trace: [c000003f7f993b70] [c00800000d44fc00] kvmppc_xive_cleanup_vcpu+0xf8/0x210 [kvm] (unreliable) [c000003f7f993bd0] [c00800000d450bd4] kvmppc_xive_release+0xdc/0x1b0 [kvm] [c000003f7f993c30] [c00800000d436a98] kvm_device_release+0xb0/0x110 [kvm] [c000003f7f993c70] [c00000000046730c] __fput+0xec/0x320 [c000003f7f993cd0] [c000000000164ae0] task_work_run+0x150/0x1c0 [c000003f7f993d30] [c000000000025034] do_notify_resume+0x304/0x440 [c000003f7f993e20] [c00000000000dcc4] ret_from_except_lite+0x70/0x74 Instruction dump: 3bff0008 7fbfd040 419e0054 847e0004 2fa30000 419effec e93d0000 8929203c 2f890000 419effb8 4800821d e8410018 <e9230010> e9490008 9b2a0039 7c0004ac ---[ end trace b925b67a74a1d8d2 ]--- Kernel panic - not syncing: Fatal exception This affects both XIVE and XICS-on-XIVE devices since the beginning. Check the VP id instead of the vCPU id when a new vCPU is connected. The allocation of the XIVE CPU structure in kvmppc_xive_connect_vcpu() is moved after the check to avoid the need for rollback. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
-
- 13 Oct, 2019 16 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "A few tracing fixes: - Remove lockdown from tracefs itself and moved it to the trace directory. Have the open functions there do the lockdown checks. - Fix a few races with opening an instance file and the instance being deleted (Discovered during the lockdown updates). Kept separate from the clean up code such that they can be backported to stable easier. - Clean up and consolidated the checks done when opening a trace file, as there were multiple checks that need to be done, and it did not make sense having them done in each open instance. - Fix a regression in the record mcount code. - Small hw_lat detector tracer fixes. - A trace_pipe read fix due to not initializing trace_seq" * tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Initialize iter->seq after zeroing in tracing_read_pipe() tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency tracing/hwlat: Report total time spent in all NMIs during the sample recordmcount: Fix nop_mcount() function tracing: Do not create tracefs files if tracefs lockdown is in effect tracing: Add locked_down checks to the open calls of files created for tracefs tracing: Add tracing_check_open_get_tr() tracing: Have trace events system open call tracing_open_generic_tr() tracing: Get trace_array reference for available_tracers files ftrace: Get a reference counter for the trace_array on filter files tracefs: Revert ccbd54ff ("tracefs: Restrict tracefs when the kernel is locked down") -
Linus Torvalds authored
Merge tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Update/fix inspur-ipsps1 and k10temp Documentation - Fix nct7904 driver - Fix HWMON_P_MIN_ALARM mask in hwmon core * tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: docs: Extend inspur-ipsps1 title underline hwmon: (nct7904) Add array fan_alarm and vsen_alarm to store the alarms in nct7904_data struct. docs: hwmon: Include 'inspur-ipsps1.rst' into docs hwmon: Fix HWMON_P_MIN_ALARM mask hwmon: (k10temp) Update documentation and add temp2_input info hwmon: (nct7904) Fix the incorrect value of vsen_mask in nct7904_data struct
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD fixes from Richard Weinberger: "Two fixes for MTD: - spi-nor: Fix for a regression in write_sr() - rawnand: Regression fix for the au1550nd driver" * tag 'fixes-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: au1550nd: Fix au_read_buf16() prototype mtd: spi-nor: Fix direction of the write_sr() transfer
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Single small fix for a regression in the sequence logic for linked commands" * tag 'for-linus-20191012' of git://git.kernel.dk/linux-block: io_uring: fix sequence logic for timeout requests
-
Petr Mladek authored
A customer reported the following softlockup: [899688.160002] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [test.sh:16464] [899688.160002] CPU: 0 PID: 16464 Comm: test.sh Not tainted 4.12.14-6.23-azure #1 SLE12-SP4 [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] Kernel panic - not syncing: softlockup: hung tasks [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] RSP: 0018:ffffa86784d4fde8 EFLAGS: 00000257 ORIG_RAX: ffffffffffffff12 [899688.160002] RAX: ffffffff970fea00 RBX: 0000000000000001 RCX: 0000000000000000 [899688.160002] RDX: ffffffff00000001 RSI: 0000000000000080 RDI: ffffffff970fea00 [899688.160002] RBP: ffffffffffffffff R08: ffffffffffffffff R09: 0000000000000000 [899688.160002] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b59014720d8 [899688.160002] R13: ffff8b59014720c0 R14: ffff8b5901471090 R15: ffff8b5901470000 [899688.160002] tracing_read_pipe+0x336/0x3c0 [899688.160002] __vfs_read+0x26/0x140 [899688.160002] vfs_read+0x87/0x130 [899688.160002] SyS_read+0x42/0x90 [899688.160002] do_syscall_64+0x74/0x160 It caught the process in the middle of trace_access_unlock(). There is no loop. So, it must be looping in the caller tracing_read_pipe() via the "waitagain" label. Crashdump analyze uncovered that iter->seq was completely zeroed at this point, including iter->seq.seq.size. It means that print_trace_line() was never able to print anything and there was no forward progress. The culprit seems to be in the code: /* reset all but tr, trace, and overruns */ memset(&iter->seq, 0, sizeof(struct trace_iterator) - offsetof(struct trace_iterator, seq)); It was added by the commit 53d0aa77 ("ftrace: add logic to record overruns"). It was v2.6.27-rc1. It was the time when iter->seq looked like: struct trace_seq { unsigned char buffer[PAGE_SIZE]; unsigned int len; }; There was no "size" variable and zeroing was perfectly fine. The solution is to reinitialize the structure after or without zeroing. Link: http://lkml.kernel.org/r/20191011142134.11997-1-pmladek@suse.comSigned-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Srivatsa S. Bhat (VMware) authored
max_latency is intended to record the maximum ever observed hardware latency, which may occur in either part of the loop (inner/outer). So we need to also consider the outer-loop sample when updating max_latency. Link: http://lkml.kernel.org/r/157073345463.17189.18124025522664682811.stgit@srivatsa-ubuntu Fixes: e7c15cd8 ("tracing: Added hardware latency tracer") Cc: stable@vger.kernel.org Signed-off-by:
Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by:
-
Srivatsa S. Bhat (VMware) authored
nmi_total_ts is supposed to record the total time spent in *all* NMIs that occur on the given CPU during the (active portion of the) sampling window. However, the code seems to be overwriting this variable for each NMI, thereby only recording the time spent in the most recent NMI. Fix it by accumulating the duration instead. Link: http://lkml.kernel.org/r/157073343544.17189.13911783866738671133.stgit@srivatsa-ubuntu Fixes: 7b2c8625 ("tracing: Add NMI tracing in hwlat detector") Cc: stable@vger.kernel.org Signed-off-by:
-
Steven Rostedt (VMware) authored
The removal of the longjmp code in recordmcount.c mistakenly made the return of make_nop() being negative an exit of nop_mcount(). It should not exit the routine, but instead just not process that part of the code. By exiting with an error code, it would cause the update of recordmcount to fail some files which would fail the build if ftrace function tracing was enabled. Link: http://lkml.kernel.org/r/20191009110538.5909fec6@gandalf.local.homeReported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by:
-
Steven Rostedt (VMware) authored
If on boot up, lockdown is activated for tracefs, don't even bother creating the files. This can also prevent instances from being created if lockdown is in effect. Link: http://lkml.kernel.org/r/CAHk-=whC6Ji=fWnjh2+eS4b15TnbsS4VPVtvBOwCy1jjEG_JHQ@mail.gmail.comSuggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
Added various checks on open tracefs calls to see if tracefs is in lockdown mode, and if so, to return -EPERM. Note, the event format files (which are basically standard on all machines) as well as the enabled_functions file (which shows what is currently being traced) are not lockde down. Perhaps they should be, but it seems counter intuitive to lockdown information to help you know if the system has been modified. Link: http://lkml.kernel.org/r/CAHk-=wj7fGPKUspr579Cii-w_y60PtRaiDgKuxVtBAMK0VNNkA@mail.gmail.comSuggested-by:
-
Steven Rostedt (VMware) authored
Currently, most files in the tracefs directory test if tracing_disabled is set. If so, it should return -ENODEV. The tracing_disabled is called when tracing is found to be broken. Originally it was done in case the ring buffer was found to be corrupted, and we wanted to prevent reading it from crashing the kernel. But it's also called if a tracing selftest fails on boot. It's a one way switch. That is, once it is triggered, tracing is disabled until reboot. As most tracefs files can also be used by instances in the tracefs directory, they need to be carefully done. Each instance has a trace_array associated to it, and when the instance is removed, the trace_array is freed. But if an instance is opened with a reference to the trace_array, then it requires looking up the trace_array to get its ref counter (as there could be a race with it being deleted and the open itself). Once it is found, a reference is added to prevent the instance from being removed (and the trace_array associated with it freed). Combine the two checks (tracing_disabled and trace_array_get()) into a single helper function. This will also make it easier to add lockdown to tracefs later. Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.homeSigned-off-by:
-
Steven Rostedt (VMware) authored
Instead of having the trace events system open call open code the taking of the trace_array descriptor (with trace_array_get()) and then calling trace_open_generic(), have it use the tracing_open_generic_tr() that does the combination of the two. This requires making tracing_open_generic_tr() global. Signed-off-by: -
Steven Rostedt (VMware) authored
As instances may have different tracers available, we need to look at the trace_array descriptor that shows the list of the available tracers for the instance. But there's a race between opening the file and an admin deleting the instance. The trace_array_get() needs to be called before accessing the trace_array. Cc: stable@vger.kernel.org Fixes: 607e2ea1 ("tracing: Set up infrastructure to allow tracers for instances") Signed-off-by:
-
Steven Rostedt (VMware) authored
The ftrace set_ftrace_filter and set_ftrace_notrace files are specific for an instance now. They need to take a reference to the instance otherwise there could be a race between accessing the files and deleting the instance. It wasn't until the :mod: caching where these file operations started referencing the trace_array directly. Cc: stable@vger.kernel.org Fixes: 673feb9d ("ftrace: Add :mod: caching infrastructure to trace_array") Signed-off-by:
-
Steven Rostedt (VMware) authored
Running the latest kernel through my "make instances" stress tests, I triggered the following bug (with KASAN and kmemleak enabled): mkdir invoked oom-killer: gfp_mask=0x40cd0(GFP_KERNEL|__GFP_COMP|__GFP_RECLAIMABLE), order=0, oom_score_adj=0 CPU: 1 PID: 2229 Comm: mkdir Not tainted 5.4.0-rc2-test #325 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 Call Trace: dump_stack+0x64/0x8c dump_header+0x43/0x3b7 ? trace_hardirqs_on+0x48/0x4a oom_kill_process+0x68/0x2d5 out_of_memory+0x2aa/0x2d0 __alloc_pages_nodemask+0x96d/0xb67 __alloc_pages_node+0x19/0x1e alloc_slab_page+0x17/0x45 new_slab+0xd0/0x234 ___slab_alloc.constprop.86+0x18f/0x336 ? alloc_inode+0x2c/0x74 ? irq_trace+0x12/0x1e ? tracer_hardirqs_off+0x1d/0xd7 ? __slab_alloc.constprop.85+0x21/0x53 __slab_alloc.constprop.85+0x31/0x53 ? __slab_alloc.constprop.85+0x31/0x53 ? alloc_inode+0x2c/0x74 kmem_cache_alloc+0x50/0x179 ? alloc_inode+0x2c/0x74 alloc_inode+0x2c/0x74 new_inode_pseudo+0xf/0x48 new_inode+0x15/0x25 tracefs_get_inode+0x23/0x7c ? lookup_one_len+0x54/0x6c tracefs_create_file+0x53/0x11d trace_create_file+0x15/0x33 event_create_dir+0x2a3/0x34b __trace_add_new_event+0x1c/0x26 event_trace_add_tracer+0x56/0x86 trace_array_create+0x13e/0x1e1 instance_mkdir+0x8/0x17 tracefs_syscall_mkdir+0x39/0x50 ? get_dname+0x31/0x31 vfs_mkdir+0x78/0xa3 do_mkdirat+0x71/0xb0 sys_mkdir+0x19/0x1b do_fast_syscall_32+0xb0/0xed I bisected this down to the addition of the proxy_ops into tracefs for lockdown. It appears that the allocation of the proxy_ops and then freeing it in the destroy_inode callback, is causing havoc with the memory system. Reading the documentation about destroy_inode and talking with Linus about this, this is buggy and wrong. When defining the destroy_inode() method, it is expected that the destroy_inode() will also free the inode, and not just the extra allocations done in the creation of the inode. The faulty commit causes a memory leak of the inode data structure when they are deleted. Instead of allocating the proxy_ops (and then having to free it) the checks should be done by the open functions themselves, and not hack into the tracefs directory. First revert the tracefs updates for locked_down and then later we can add the locked_down checks in the kernel/trace files. Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.home Fixes: ccbd54ff ("tracefs: Restrict tracefs when the kernel is locked down") Suggested-by:
-
- 12 Oct, 2019 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.4-rc3. Nothing huge here. Some binder driver fixes (although it is still being discussed if these all fix the reported issues or not, so more might be coming later), some mei device ids and fixes, and a google firmware driver bugfix that fixes a regression, as well as some other tiny fixes. All have been in linux-next with no reported issues" * tag 'char-misc-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: firmware: google: increment VPD key_len properly w1: ds250x: Fix build error without CRC16 virt: vbox: fix memory leak in hgcm_call_preprocess_linaddr binder: Fix comment headers on binder_alloc_prepare_to_free() binder: prevent UAF read in print_binder_transaction_log_entry() misc: fastrpc: prevent memory leak in fastrpc_dma_buf_attach mei: avoid FW version request on Ibex Peak and earlier mei: me: add comet point (lake) LP device ids
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are some staging and IIO driver fixes for 5.4-rc3. The "biggest" thing here is a removal of the fbtft device and flexfb code as they have been abandoned by their authors and are no longer needed for that hardware. Other than that, the usual amount of staging driver and iio driver fixes for reported issues, and some speakup sysfs file documentation, which has been long awaited for. All have been in linux-next with no reported issues" * tag 'staging-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (32 commits) iio: Fix an undefied reference error in noa1305_probe iio: light: opt3001: fix mutex unlock race iio: adc: ad799x: fix probe error handling iio: light: add missing vcnl4040 of_compatible iio: light: fix vcnl4000 devicetree hooks iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller iio: adc: axp288: Override TS pin bias current for some models iio: imu: adis16400: fix memory leak iio: imu: adis16400: release allocated memory on failure iio: adc: stm32-adc: fix a race when using several adcs with dma and irq iio: adc: stm32-adc: move registers definitions iio: accel: adxl372: Perform a reset at start up iio: accel: adxl372: Fix push to buffers lost samples iio: accel: adxl372: Fix/remove limitation for FIFO samples iio: adc: hx711: fix bug in sampling of data staging: vt6655: Fix memory leak in vt6655_probe staging: exfat: Use kvzalloc() instead of kzalloc() for exfat_sb_info Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc staging: speakup: document sysfs attributes staging: rtl8188eu: fix HighestRate check in odm_ARFBRefresh_8188E() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 5.4-rc3 that resolve a number of reported issues and regressions. None of these are huge, full details are in the shortlog. There's also a MAINTAINERS update that I think you might have already taken in your tree already, but git should handle that merge easily. All have been in linux-next with no reported issues" * tag 'tty-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb tty: serial: imx: Use platform_get_irq_optional() for optional IRQs serial: fix kernel-doc warning in comments serial: 8250_omap: Fix gpio check for auto RTS/CTS serial: mctrl_gpio: Check for NULL pointer tty: serial: fsl_lpuart: Fix lpuart_flush_buffer() tty: serial: Fix PORT_LINFLEXUART definition tty: n_hdlc: fix build on SPARC serial: uartps: Fix uartps_major handling serial: uartlite: fix exit path null pointer tty: serial: linflexuart: Fix magic SysRq handling serial: sh-sci: Use platform_get_irq_optional() for optional interrupts dt-bindings: serial: sh-sci: Document r8a774b1 bindings serial/sifive: select SERIAL_EARLYCON tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()' tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a lot of small USB driver fixes for 5.4-rc3. syzbot has stepped up its testing of the USB driver stack, now able to trigger fun race conditions between disconnect and probe functions. Because of that we have a lot of fixes in here from Johan and others fixing these reported issues that have been around since almost all time. We also are just deleting the rio500 driver, making all of the syzbot bugs found in it moot as it turns out no one has been using it for years as there is a userspace version that is being used instead. There are also a number of other small fixes in here, all resolving reported issues or regressions. All have been in linux-next without any reported issues" * tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits) USB: yurex: fix NULL-derefs on disconnect USB: iowarrior: use pr_err() USB: iowarrior: drop redundant iowarrior mutex USB: iowarrior: drop redundant disconnect mutex USB: iowarrior: fix use-after-free after driver unbind USB: iowarrior: fix use-after-free on release USB: iowarrior: fix use-after-free on disconnect USB: chaoskey: fix use-after-free on release USB: adutux: fix use-after-free on release USB: ldusb: fix NULL-derefs on driver unbind USB: legousbtower: fix use-after-free on release usb: cdns3: Fix for incorrect DMA mask. usb: cdns3: fix cdns3_core_init_role() usb: cdns3: gadget: Fix full-speed mode USB: usb-skeleton: drop redundant in-urb check USB: usb-skeleton: fix use-after-free after driver unbind USB: usb-skeleton: fix NULL-deref on disconnect usb:cdns3: Fix for CV CH9 running with g_zero driver. usb: dwc3: Remove dev_err() on platform_get_irq() failure usb: dwc3: Switch to platform_get_irq_byname_optional() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: a guest-cputime accounting fix, and a cgroup bandwidth quota precision fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/vtime: Fix guest/system mis-accounting on task switch sched/fair: Scale bandwidth quota and period without losing quota/period ratio precision
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also a couple of updates for new Intel models (which are technically hw-enablement, but to users it's a fix to perf behavior on those new CPUs - hope this is fine), an AUX inheritance fix, event time-sharing fix, and a fix for lost non-perf NMI events on AMD systems" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf/x86/cstate: Add Tiger Lake CPU support perf/x86/msr: Add Tiger Lake CPU support perf/x86/intel: Add Tiger Lake CPU support perf/x86/cstate: Update C-state counters for Ice Lake perf/x86/msr: Add new CPU model numbers for Ice Lake perf/x86/cstate: Add Comet Lake CPU support perf/x86/msr: Add Comet Lake CPU support perf/x86/intel: Add Comet Lake CPU support perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp perf/core: Fix corner case in perf_rotate_context() perf/core: Rework memory accounting in perf_mmap() perf/core: Fix inheritance of aux_output groups perf annotate: Don't return -1 for error when doing BPF disassembly perf annotate: Return appropriate error code for allocation failures perf annotate: Fix arch specific ->init() failure errors perf annotate: Propagate the symbol__annotate() error return perf annotate: Fix the signedness of failure returns perf annotate: Propagate perf_env__arch() error perf evsel: Fall back to global 'perf_env' in perf_evsel__env() perf tools: Propagate get_cpuid() error ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Ingo Molnar: "Misc EFI fixes all across the map: CPER error report fixes, fixes to TPM event log parsing, fix for a kexec hang, a Sparse fix and other fixes" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/tpm: Fix sanity check of unsigned tbl_size being less than zero efi/x86: Do not clean dummy variable in kexec path efi: Make unexported efi_rci2_sysfs_init() static efi/tpm: Only set 'efi_tpm_final_log_size' after successful event log parsing efi/tpm: Don't traverse an event log with no events efi/tpm: Don't access event->count when it isn't mapped efivar/ssdt: Don't iterate over EFI vars if no SSDT override was specified efi/cper: Fix endianness of PCIe class code
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "A handful of fixes: a kexec linking fix, an AMD MWAITX fix, a vmware guest support fix when built under Clang, and new CPU model number definitions" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add Comet Lake to the Intel CPU models header lib/string: Make memzero_explicit() inline instead of external x86/cpu/vmware: Use the full form of INL in VMWARE_PORT x86/asm: Fix MWAITX C-state hint value
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 license tag fixlets from Ingo Molnar: "Fix a couple of SPDX tags in x86 headers to follow the canonical pattern" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Use the correct SPDX License Identifier in headers
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: - Fix several bugs in the breakpoint trap handler - Drop an unnecessary loop around calls to preempt_schedule_irq() * tag 'riscv/for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: entry: Remove unneeded need_resched() loop riscv: Correct the handling of unexpected ebreak in do_trap_break() riscv: avoid sending a SIGTRAP to a user thread trapped in WARN() riscv: avoid kernel hangs when trapped in BUG()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: - Build fixes for CONFIG_OPTIMIZE_INLINING=y builds in which the compiler may choose not to inline __xchg() & __cmpxchg(). - A build fix for Loongson configurations with GCC 9.x. - Expose some extra HWCAP bits to indicate support for various instruction set extensions to userland. - Fix bad stack access in firmware handling code for old SNI RM200/300/400 machines. * tag 'mips_fixes_5.4_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Disable Loongson MMI instructions for kernel build MIPS: elf_hwcap: Export userspace ASEs MIPS: fw: sni: Fix out of bounds init of o32 stack MIPS: include: Mark __xchg as __always_inline MIPS: include: Mark __cmpxchg as __always_inline
-
