- 16 Aug, 2017 22 commits
-
-
Moses Reuben authored
v2: * Renamed ALLOC_MEMORY_OF_SCRATCH to SET_SCRATCH_BACKING_VA * Removed size parameter from the ioctl, it was unused * Removed hole in ioctl number space * No more call to write_config_static_mem * Return correct error code from ioctl Signed-off-by:
Moses Reuben <moses.reuben@amd.com> Signed-off-by:
Ben Goz <ben.goz@amd.com> Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com>
-
Moses Reuben authored
v2: * Shortened headline * Removed write_config_static_mem, it gets initialized by gfx_v?_0_gpu_init * Renamed alloc_memory_of_scratch to set_scratch_backing_va * Made set_scratch_backing_va a void function * Documented set_scratch_backing in kgd_kfd_interface.h Signed-off-by:
-
Felix Kuehling authored
This register only has a single instance in the hardware. Its value applies to all VMIDS. Signed-off-by:
-
Felix Kuehling authored
Various bug fixes and improvements that accumulated over the last two years. Signed-off-by:
-
Felix Kuehling authored
It's causing problems with user mode queues and the HIQ, and can lead to hard hangs during boot after programming RLC_CP_SCHEDULERS. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Felix Kuehling authored
To match current firmware. The map process packet has been extended to support scratch. This is a non-backwards compatible change and it's about two years old. So no point keeping the old version around conditionally. Signed-off-by:
-
Jay Cornwall authored
Gfx8 HW incorrectly clamps CP_HQD_EOP_CONTROL.EOP_SIZE, which can lead to scheduling deadlock due to SE EOP done counter overflow. Enforce a EOP queue size limit which prevents the CP from sending more than 0xFF events at a time. Signed-off-by:
Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by:
-
Yong Zhao authored
v2: Turned WARN into dev_warn and made the message more helpful Signed-off-by:
Yong Zhao <Yong.Zhao@amd.com> Signed-off-by:
-
Felix Kuehling authored
In most cases, BUG_ONs can be replaced with WARN_ON with an error return. In some void functions just turn them into a WARN_ON and possibly an early exit. v2: * Cleaned up error handling in pm_send_unmap_queue * Removed redundant WARN_ON in kfd_process_destroy_delayed Signed-off-by:
-
Felix Kuehling authored
gtt_sa_bitmap is accessed by bitmap functions, which operate on longs. Therefore the array should be allocated in long units. Also round up in case the number of bits is not a multiple of BITS_PER_LONG. Signed-off-by:
-
Felix Kuehling authored
Handle errors in doorbell aperture initialization instead of BUG_ON. iounmap doorbell aperture during finalization. Signed-off-by:
-
Felix Kuehling authored
Remove BUG_ONs that check for NULL pointer arguments that are dereferenced in the same function. Dereferencing the NULL pointer will generate a BUG anyway, so the explicit check is redundant and unnecessary overhead. Signed-off-by:
-
Kent Russell authored
See https://kernel.org/doc/html/latest/process/coding-style.html under "14) Allocating Memory" for rationale behind removing the x=alloc(sizeof(struct) style and using x=alloc(sizeof(*x) instead Signed-off-by:
Kent Russell <kent.russell@amd.com> Signed-off-by:
-
Kent Russell authored
Remove gotos that do not feature any common cleanup, and use gotos instead of repeating cleanup commands. According to kernel.org: "The goto statement comes in handy when a function exits from multiple locations and some common work such as cleanup has to be done. If there is no cleanup needed then just return directly." v2: Applied review suggestions in create_queue_nocpsch Signed-off-by:
-
Kent Russell authored
Upstream prefers the !x notation to x==NULL or x==false. Along those lines change the ==true or !=NULL references as well. Also make the references to !x the same, excluding () for readability. Signed-off-by:
-
Kent Russell authored
Consolidate log commands so that dev_info(NULL, "Error...") uses the more accurate pr_err, remove the module name from the log (can be seen via dynamic debugging with +m), and the function name (can be seen via dynamic debugging with +f). We also don't need debug messages saying what function we're in. Those can be added by devs when needed Don't print vendor and device ID in error messages. They are typically the same for all GPUs in a multi-GPU system. So this doesn't add any value to the message. Lastly, remove parentheses around %d, %i and 0x%llX. According to kernel.org: "Printing numbers in parentheses (%d) adds no value and should be avoided." Signed-off-by:
-
Kent Russell authored
Using checkpatch.pl -f <file> showed a number of style issues. This patch addresses as many of them as possible. Some long lines have been left for readability, but attempts to minimize them have been made. v2: Broke long lines in gfx_v7 get_fw_version Signed-off-by:
-
Felix Kuehling authored
Remove hard-coded assumption that the first compute pipe is reserved for amdgpu. Pipe 0 actually means pipe 0 now. Signed-off-by:
-
Felix Kuehling authored
Use shared_resources.queue_bitmap to determine the queues available for KFD in each pipe. Signed-off-by:
-
Felix Kuehling authored
kfd2kgd->address_watch_get_offset returns dword register offsets. Signed-off-by:
-
Felix Kuehling authored
Dword offsets are what KFD really needs and what amdgpu already returns. Signed-off-by:
-
Felix Kuehling authored
Signed-off-by:
-
- 17 Aug, 2017 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxDave Airlie authored
omapdrm changes for v4.14 * HDMI hot plug IRQ support (instead of polling) * Big driver cleanup from Laurent (no functional changes) * OMAP5 DSI support (only the pinmuxing was missing) * tag 'omapdrm-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (60 commits) drm/omap: Potential NULL deref in omap_crtc_duplicate_state() drm/omap: remove no-op cleanup code drm/omap: rename omapdrm device back drm: omapdrm: Remove omapdrm platform data ARM: OMAP2+: Don't register omapdss device for omapdrm ARM: OMAP2+: Remove unused omapdrm platform device drm: omapdrm: Remove the omapdss driver drm: omapdrm: Register omapdrm platform device in omapdss driver drm: omapdrm: hdmi: Don't allocate PHY features dynamically drm: omapdrm: hdmi: Configure the PHY from the HDMI core version drm: omapdrm: hdmi: Configure the PLL from the HDMI core version drm: omapdrm: hdmi: Pass HDMI core version as integer to HDMI audio drm: omapdrm: hdmi: Replace OMAP SoC model check with HDMI xmit version drm: omapdrm: hdmi: Rename functions and structures to use hdmi_ prefix drm/omap: add OMAP5 DSIPHY lane-enable support drm/omap: use regmap_update_bit() when muxing DSI pads drm: omapdrm: Remove dss_features.h drm: omapdrm: Move supported outputs feature to dss driver drm: omapdrm: Move DSS_FCK feature to dss driver drm: omapdrm: Move PCD, LINEWIDTH and DOWNSCALE features to dispc driver ...
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
More features for 4.14. Nothing too major here. I have a few more additional patches for large page support in vega10 among other things, but they require some resevation object patches from drm-misc-next, so I'll send that request once you've pulled the latest drm-misc-next. Highlights: - Fixes for ACP audio on stoney - SR-IOV fixes for vega10 - various powerplay fixes - lots of code clean up * 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (62 commits) drm/amdgpu/gfx7: fix function name drm/amd/amdgpu: Disabling Power Gating for Stoney platform drm/amd/amdgpu: Added a quirk for Stoney platform drm/amdgpu: jt_size was wrongly counted twice drm/amdgpu: fix missing endian-safe guard drm/amdgpu: ignore digest_size when loading sdma fw for raven drm/amdgpu: Uninitialized variable in amdgpu_ttm_backend_bind() drm/amd/powerplay: fix coding style in hwmgr.c drm/amd/powerplay: refine dmesg info under powerplay. drm/amdgpu: don't finish the ring if not initialized drm/radeon: Fix preferred typo drm/amdgpu: Fix preferred typo drm/radeon: Fix stolen typo drm/amdgpu: Fix stolen typo drm/amd/powerplay: fix coccinelle warnings in vega10_hwmgr.c drm/amdgpu: set gfx_v9_0_ip_funcs as static drm/radeon: switch to drm_*{get,put} helpers drm/amdgpu: switch to drm_*{get,put} helpers drm/amd/powerplay: add CZ profile support drm/amd/powerplay: fix PSI not enabled by kmd ...
-
- 16 Aug, 2017 16 commits
-
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
UAPI Changes: - vc4: Allow userspace to dictate rendering order in submit_cl ioctl (Eric) Cross-subsystem Changes: - vboxvideo: One of Cihangir's patches applies to vboxvideo which is maintained in staging Core Changes: - atomic_legacy_backoff is officially killed (Daniel) - Extract drm_device.h (Daniel) - Unregister drm device on unplug (Daniel) - Rename deprecated drm_*_(un)?reference functions to drm_*_{get|put} (Cihangir) Driver Changes: - vc4: Error/destroy path cleanups, log level demotion, edid leak (Eric) - various: Make various drm_*_funcs structs const (Bhumika) - tinydrm: add support for LEGO MINDSTORMS EV3 LCD (David) - various: Second half of .dumb_{map_offset|destroy} defaults set (Noralf) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Bhumika Goyal <bhumirks@gmail.com> Cc: Cihangir Akturk <cakturk@gmail.com> Cc: David Lechner <david@lechnology.com> Cc: Noralf Trønnes <noralf@tronnes.org> * tag 'drm-misc-next-2017-08-16' of git://anongit.freedesktop.org/git/drm-misc: (50 commits) drm/gem-cma-helper: Remove drm_gem_cma_dumb_map_offset() drm/virtio: Use the drm_driver.dumb_destroy default drm/bochs: Use the drm_driver.dumb_destroy default drm/mgag200: Use the drm_driver.dumb_destroy default drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults drm/msm: Use the drm_driver.dumb_destroy default drm/ast: Use the drm_driver.dumb_destroy default drm/qxl: Use the drm_driver.dumb_destroy default drm/udl: Use the drm_driver.dumb_destroy default drm/cirrus: Use the drm_driver.dumb_destroy default drm/tegra: Use .dumb_map_offset and .dumb_destroy defaults drm/gma500: Use .dumb_map_offset and .dumb_destroy defaults drm/mxsfb: Use .dumb_map_offset and .dumb_destroy defaults drm/meson: Use .dumb_map_offset and .dumb_destroy defaults drm/kirin: Use .dumb_map_offset and .dumb_destroy defaults drm/vc4: Continue the switch to drm_*_put() helpers drm/vc4: Fix leak of HDMI EDID dma-buf: fix reservation_object_wait_timeout_rcu to wait correctly v2 dma-buf: add reservation_object_copy_fences (v2) drm/tinydrm: add support for LEGO MINDSTORMS EV3 LCD ... -
Noralf Trønnes authored
There are no more users of drm_gem_cma_dumb_map_offset(), so remove it. Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-20-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
virtio_gpu_mode_dumb_destroy() is the same as drm_gem_dumb_destroy() which is the drm_driver.dumb_destroy default, so no need to set it. Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Use drm_gem_dumb_map_offset() in exynos_drm_gem_map_ioctl() and remove exynos_drm_gem_dumb_map_offset(). Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Marek Vasut <marex@denx.de> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Signed-off-by:
-
