- 17 Dec, 2018 40 commits
-
-
Lorenzo Stoakes authored
commit 859110d7 upstream. This removes the redundant 'write' and 'force' parameters from __get_user_pages_locked() to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by:
Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by:
Jan Kara <jack@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 4.4: - Drop change in get_user_pages_remote() - Adjust context] Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Axboe authored
commit f7068114 upstream. We're casting the CDROM layer request_sense to the SCSI sense buffer, but the former is 64 bytes and the latter is 96 bytes. As we generally allocate these on the stack, we end up blowing up the stack. Fix this by wrapping the scsi_execute() call with a properly sized sense buffer, and copying back the bits for the CDROM layer. Reported-by:
Piotr Gabriel Kosinski <pg.kosinski@gmail.com> Reported-by:
Daniel Shapira <daniel@twistlock.com> Tested-by:
Kees Cook <keescook@chromium.org> Fixes: 82ed4db4 ("block: split scsi_request out of struct request") Signed-off-by:
Jens Axboe <axboe@kernel.dk> [bwh: Despite what the "Fixes" field says, a buffer overrun was already possible if the sense data was really > 64 bytes long. Backported to 4.4: - We always need to allocate a sense buffer in order to call scsi_normalize_sense() - Remove the existing conditional heap-allocation of the sense buffer] Signed-off-by:
-
Kees Cook authored
commit 7d63fb3a upstream. This removes needless use of '%p', and refactors the printk calls to use pr_*() helpers instead. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> [bwh: Backported to 4.4: - Adjust filename - Remove "swiotlb: " prefix from an additional log message] Signed-off-by:
-
Mike Kravetz authored
commit 5df63c2a upstream. This is a fix for a regression in 32 bit kernels caused by an invalid check for pgoff overflow in hugetlbfs mmap setup. The check incorrectly specified that the size of a loff_t was the same as the size of a long. The regression prevents mapping hugetlbfs files at offsets greater than 4GB on 32 bit kernels. On 32 bit kernels conversion from a page based unsigned long can not overflow a loff_t byte offset. Therefore, skip this check if sizeof(unsigned long) != sizeof(loff_t). Link: http://lkml.kernel.org/r/20180330145402.5053-1-mike.kravetz@oracle.com Fixes: 63489f8e ("hugetlbfs: check for pgoff value overflow") Reported-by:
Dan Rue <dan.rue@linaro.org> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Tested-by:
Anders Roxell <anders.roxell@linaro.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Yisheng Xie <xieyisheng1@huawei.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nic Losby <blurbdust@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Mike Kravetz authored
commit 63489f8e upstream. A vma with vm_pgoff large enough to overflow a loff_t type when converted to a byte offset can be passed via the remap_file_pages system call. The hugetlbfs mmap routine uses the byte offset to calculate reservations and file size. A sequence such as: mmap(0x20a00000, 0x600000, 0, 0x66033, -1, 0); remap_file_pages(0x20a00000, 0x600000, 0, 0x20000000000000, 0); will result in the following when task exits/file closed, kernel BUG at mm/hugetlb.c:749! Call Trace: hugetlbfs_evict_inode+0x2f/0x40 evict+0xcb/0x190 __dentry_kill+0xcb/0x150 __fput+0x164/0x1e0 task_work_run+0x84/0xa0 exit_to_usermode_loop+0x7d/0x80 do_syscall_64+0x18b/0x190 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The overflowed pgoff value causes hugetlbfs to try to set up a mapping with a negative range (end < start) that leaves invalid state which causes the BUG. The previous overflow fix to this code was incomplete and did not take the remap_file_pages system call into account. [mike.kravetz@oracle.com: v3] Link: http://lkml.kernel.org/r/20180309002726.7248-1-mike.kravetz@oracle.com [akpm@linux-foundation.org: include mmdebug.h] [akpm@linux-foundation.org: fix -ve left shift count on sh] Link: http://lkml.kernel.org/r/20180308210502.15952-1-mike.kravetz@oracle.com Fixes: 045c7a3f ("hugetlbfs: fix offset overflow in hugetlbfs mmap") Signed-off-by:
Nic Losby <blurbdust@gmail.com> Acked-by:
-
Mike Kravetz authored
commit 045c7a3f upstream. If mmap() maps a file, it can be passed an offset into the file at which the mapping is to start. Offset could be a negative value when represented as a loff_t. The offset plus length will be used to update the file size (i_size) which is also a loff_t. Validate the value of offset and offset + length to make sure they do not overflow and appear as negative. Found by syzcaller with commit ff8c0c53 ("mm/hugetlb.c: don't call region_abort if region_chg fails") applied. Prior to this commit, the overflow would still occur but we would luckily return ENOMEM. To reproduce: mmap(0, 0x2000, 0, 0x40021, 0xffffffffffffffffULL, 0x8000000000000000ULL); Resulted in, kernel BUG at mm/hugetlb.c:742! Call Trace: hugetlbfs_evict_inode+0x80/0xa0 evict+0x24a/0x620 iput+0x48f/0x8c0 dentry_unlink_inode+0x31f/0x4d0 __dentry_kill+0x292/0x5e0 dput+0x730/0x830 __fput+0x438/0x720 ____fput+0x1a/0x20 task_work_run+0xfe/0x180 exit_to_usermode_loop+0x133/0x150 syscall_return_slowpath+0x184/0x1c0 entry_SYSCALL_64_fastpath+0xab/0xad Fixes: ff8c0c53 ("mm/hugetlb.c: don't call region_abort if region_chg fails") Link: http://lkml.kernel.org/r/1491951118-30678-1-git-send-email-mike.kravetz@oracle.comReported-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Mike Kravetz authored
commit ff8c0c53 upstream. Changes to hugetlbfs reservation maps is a two step process. The first step is a call to region_chg to determine what needs to be changed, and prepare that change. This should be followed by a call to call to region_add to commit the change, or region_abort to abort the change. The error path in hugetlb_reserve_pages called region_abort after a failed call to region_chg. As a result, the adds_in_progress counter in the reservation map is off by 1. This is caught by a VM_BUG_ON in resv_map_release when the reservation map is freed. syzkaller fuzzer (when using an injected kmalloc failure) found this bug, that resulted in the following: kernel BUG at mm/hugetlb.c:742! Call Trace: hugetlbfs_evict_inode+0x7b/0xa0 fs/hugetlbfs/inode.c:493 evict+0x481/0x920 fs/inode.c:553 iput_final fs/inode.c:1515 [inline] iput+0x62b/0xa20 fs/inode.c:1542 hugetlb_file_setup+0x593/0x9f0 fs/hugetlbfs/inode.c:1306 newseg+0x422/0xd30 ipc/shm.c:575 ipcget_new ipc/util.c:285 [inline] ipcget+0x21e/0x580 ipc/util.c:639 SYSC_shmget ipc/shm.c:673 [inline] SyS_shmget+0x158/0x230 ipc/shm.c:657 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: resv_map_release+0x265/0x330 mm/hugetlb.c:742 Link: http://lkml.kernel.org/r/1490821682-23228-1-git-send-email-mike.kravetz@oracle.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
-
Thomas Gleixner authored
commit 78c9c4df upstream. The posix timer overrun handling is broken because the forwarding functions can return a huge number of overruns which does not fit in an int. As a consequence timer_getoverrun(2) and siginfo::si_overrun can turn into random number generators. The k_clock::timer_forward() callbacks return a 64 bit value now. Make k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal accounting is correct. 3Remove the temporary (int) casts. Add a helper function which clamps the overrun value returned to user space via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value between 0 and INT_MAX. INT_MAX is an indicator for user space that the overrun value has been clamped. Reported-by:
Team OWL337 <icytxw@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de [florian: Make patch apply to v4.9.135] Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Lior David authored
commit b5a8ffca upstream. Add a length check in wmi_set_ie to detect unsigned integer overflow. Signed-off-by:
Lior David <qca_liord@qca.qualcomm.com> Signed-off-by:
Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Alexei Starovoitov authored
commit af86ca4e upstream. Detect code patterns where malicious 'speculative store bypass' can be used and sanitize such patterns. 39: (bf) r3 = r10 40: (07) r3 += -216 41: (79) r8 = *(u64 *)(r7 +0) // slow read 42: (7a) *(u64 *)(r10 -72) = 0 // verifier inserts this instruction 43: (7b) *(u64 *)(r8 +0) = r3 // this store becomes slow due to r8 44: (79) r1 = *(u64 *)(r6 +0) // cpu speculatively executes this load 45: (71) r2 = *(u8 *)(r1 +0) // speculatively arbitrary 'load byte' // is now sanitized Above code after x86 JIT becomes: e5: mov %rbp,%rdx e8: add $0xffffffffffffff28,%rdx ef: mov 0x0(%r13),%r14 f3: movq $0x0,-0x48(%rbp) fb: mov %rdx,0x0(%r14) ff: mov 0x0(%rbx),%rdi 103: movzbq 0x0(%rdi),%rsi Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Ben Hutchings authored
Extracted from commit 31fd8581 "bpf: permits narrower load from bpf program context fields". Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Ben Hutchings authored
Extracted from commit dc503a8a "bpf/verifier: track liveness for pruning". Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Alexei Starovoitov authored
commit cedaf52693f02372010548c63b2e63228b959099 upstream. The verifier supported only 4-byte metafields in struct __sk_buff and struct xdp_md. The metafields in upcoming struct bpf_perf_event are 8-byte to match register width in struct pt_regs. Teach verifier to recognize 8-byte metafield access. The patch doesn't affect safety of sockets and xdp programs. They check for 4-byte only ctx access before these conditions are hit. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Tom Lendacky authored
commit bc226f07 upstream. Expose the new virtualized architectural mechanism, VIRT_SSBD, for using speculative store bypass disable (SSBD) under SVM. This will allow guests to use SSBD on hardware that uses non-architectural mechanisms for enabling SSBD. [ tglx: Folded the migration fixup from Paolo Bonzini ] Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
Borislav Petkov authored
commit e7c587da upstream. Intel and AMD have different CPUID bits hence for those use synthetic bits which get set on the respective vendor's in init_speculation_control(). So that debacles like what the commit message of c65732e4 ("x86/cpu: Restore CPUID_8000_0008_EBX reload") talks about don't happen anymore. Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Jörg Otte <jrg.otte@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20180504161815.GG9257@pd.tnicSigned-off-by:
-
Thomas Gleixner authored
commit ccbcd267 upstream. AMD is proposing a VIRT_SPEC_CTRL MSR to handle the Speculative Store Bypass Disable via MSR_AMD64_LS_CFG so that guests do not have to care about the bit position of the SSBD bit and thus facilitate migration. Also, the sibling coordination on Family 17H CPUs can only be done on the host. Extend x86_spec_ctrl_set_guest() and x86_spec_ctrl_restore_host() with an extra argument for the VIRT_SPEC_CTRL MSR. Hand in 0 from VMX and in SVM add a new virt_spec_ctrl member to the CPU data structure which is going to be used in later patches for the actual implementation. Signed-off-by:
-
Thomas Gleixner authored
commit 15e6c22f upstream. svm_vcpu_run() invokes x86_spec_ctrl_restore_host() after VMEXIT, but before the host GS is restored. x86_spec_ctrl_restore_host() uses 'current' to determine the host SSBD state of the thread. 'current' is GS based, but host GS is not yet restored and the access causes a triple fault. Move the call after the host GS restore. Fixes: 885f82bf x86/process: Allow runtime control of Speculative Store Bypass Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit da39556f upstream. Expose the CPUID.7.EDX[31] bit to the guest, and also guard against various combinations of SPEC_CTRL MSR values. The handling of the MSR (to take into account the host value of SPEC_CTRL Bit(2)) is taken care of in patch: KVM/SVM/VMX/x86/spectre_v2: Support the combination of guest and host IBRS Signed-off-by:
Ingo Molnar <mingo@kernel.org> [dwmw2: Handle 4.9 guest CPUID differences, rename guest_cpu_has_ibrs() → guest_cpu_has_spec_ctrl()] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 5cf68754 upstream. A guest may modify the SPEC_CTRL MSR from the value used by the kernel. Since the kernel doesn't use IBRS, this means a value of zero is what is needed in the host. But the 336996-Speculative-Execution-Side-Channel-Mitigations.pdf refers to the other bits as reserved so the kernel should respect the boot time SPEC_CTRL value and use that. This allows to deal with future extensions to the SPEC_CTRL interface if any at all. Note: This uses wrmsrl() instead of native_wrmsl(). I does not make any difference as paravirt will over-write the callq *0xfff.. with the wrmsrl assembler code. Signed-off-by:
-
Dan Williams authored
commit 304ec1b0 upstream. Quoting Linus: I do think that it would be a good idea to very expressly document the fact that it's not that the user access itself is unsafe. I do agree that things like "get_user()" want to be protected, but not because of any direct bugs or problems with get_user() and friends, but simply because get_user() is an excellent source of a pointer that is obviously controlled from a potentially attacking user space. So it's a prime candidate for then finding _subsequent_ accesses that can then be used to perturb the cache. __uaccess_begin_nospec() covers __get_user() and copy_from_iter() where the limit check is far away from the user pointer de-reference. In those cases a barrier_nospec() prevents speculation with a potential pointer to privileged memory. uaccess_try_nospec covers get_user_try. Suggested-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
commit b5c4ae4f upstream. In preparation for converting some __uaccess_begin() instances to __uacess_begin_nospec(), make sure all 'from user' uaccess paths are using the _begin(), _end() helpers rather than open-coded stac() and clac(). No functional changes. Suggested-by:
Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Dan Williams authored
commit b3bbfb3f upstream. For __get_user() paths, do not allow the kernel to speculate on the value of a user controlled pointer. In addition to the 'stac' instruction for Supervisor Mode Access Protection (SMAP), a barrier_nospec() causes the access_ok() result to resolve in the pipeline before the CPU might take any speculative action on the pointer value. Given the cost of 'stac' the speculation barrier is placed after 'stac' to hopefully overlap the cost of disabling SMAP with the cost of flushing the instruction pipeline. Since __get_user is a major kernel interface that deals with user controlled pointers, the __uaccess_begin_nospec() mechanism will prevent speculative execution past an access_ok() permission check. While speculative execution past access_ok() is not enough to lead to a kernel memory leak, it is a necessary precondition. To be clear, __uaccess_begin_nospec() is addressing a class of potential problems near __get_user() usages. Note, that while the barrier_nospec() in __uaccess_begin_nospec() is used to protect __get_user(), pointer masking similar to array_index_nospec() will be used for get_user() since it incorporates a bounds check near the usage. uaccess_try_nospec provides the same mechanism for get_user_try. No functional changes. Suggested-by:
-
Linus Torvalds authored
commit de9e478b upstream. In commit 11f1a4b9 ("x86: reorganize SMAP handling in user space accesses") I changed how the stac/clac instructions were generated around the user space accesses, which then made it possible to do batched accesses efficiently for user string copies etc. However, in doing so, I completely spaced out, and didn't even think about the 32-bit case. And nobody really even seemed to notice, because SMAP doesn't even exist until modern Skylake processors, and you'd have to be crazy to run 32-bit kernels on a modern CPU. Which brings us to Andy Lutomirski. He actually tested the 32-bit kernel on new hardware, and noticed that it doesn't work. My bad. The trivial fix is to add the required uaccess begin/end markers around the raw accesses in <asm/uaccess_32.h>. I feel a bit bad about this patch, just because that header file really should be cleaned up to avoid all the duplicated code in it, and this commit just expands on the problem. But this just fixes the bug without any bigger cleanup surgery. Reported-and-tested-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Linus Torvalds authored
commit 11f1a4b9 upstream. This reorganizes how we do the stac/clac instructions in the user access code. Instead of adding the instructions directly to the same inline asm that does the actual user level access and exception handling, add them at a higher level. This is mainly preparation for the next step, where we will expose an interface to allow users to mark several accesses together as being user space accesses, but it does already clean up some code: - the inlined trivial cases of copy_in_user() now do stac/clac just once over the accesses: they used to do one pair around the user space read, and another pair around the write-back. - the {get,put}_user_ex() macros that are used with the catch/try handling don't do any stac/clac at all, because that happens in the try/catch surrounding them. Other than those two cleanups that happened naturally from the re-organization, this should not make any difference. Yet. Signed-off-by:
-
Paolo Bonzini authored
commit ecb586bd upstream. Having a paravirt indirect call in the IBRS restore path is not a good idea, since we are trying to protect from speculative execution of bogus indirect branch targets. It is also slower, so use native_wrmsrl() on the vmentry path too. Signed-off-by:
Jim Mattson <jmattson@google.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Fixes: d28b387f Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.comSigned-off-by:
-
KarimAllah Ahmed authored
commit b2ac58f9 upstream. [ Based on a patch from Paolo Bonzini <pbonzini@redhat.com> ] ... basically doing exactly what we do for VMX: - Passthrough SPEC_CTRL to guests (if enabled in guest CPUID) - Save and restore SPEC_CTRL around VMExit and VMEntry only if the guest actually used it. Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by:
Darren Kenny <darren.kenny@oracle.com> Reviewed-by:
-
KarimAllah Ahmed authored
commit d28b387f upstream. [ Based on a patch from Ashok Raj <ashok.raj@intel.com> ] Add direct access to MSR_IA32_SPEC_CTRL for guests. This is needed for guests that will only mitigate Spectre V2 through IBRS+IBPB and will not be using a retpoline+IBPB based approach. To avoid the overhead of saving and restoring the MSR_IA32_SPEC_CTRL for guests that do not actually use the MSR, only start saving and restoring when a non-zero is written to it. No attempt is made to handle STIBP here, intentionally. Filtering STIBP may be added in a future patch, which may require trapping all writes if we don't want to pass it through directly to the guest. [dwmw2: Clean up CPUID bits, save/restore manually, handle reset] Signed-off-by:
-
KarimAllah Ahmed authored
commit 28c1c9fa upstream. Intel processors use MSR_IA32_ARCH_CAPABILITIES MSR to indicate RDCL_NO (bit 0) and IBRS_ALL (bit 1). This is a read-only MSR. By default the contents will come directly from the hardware, but user-space can still override it. [dwmw2: The bit in kvm_cpuid_7_0_edx_x86_features can be unconditional] Signed-off-by:
-
Ashok Raj authored
commit 15d45071 upstream. The Indirect Branch Predictor Barrier (IBPB) is an indirect branch control mechanism. It keeps earlier branches from influencing later ones. Unlike IBRS and STIBP, IBPB does not define a new mode of operation. It's a command that ensures predicted branch targets aren't used after the barrier. Although IBRS and IBPB are enumerated by the same CPUID enumeration, IBPB is very different. IBPB helps mitigate against three potential attacks: * Mitigate guests from being attacked by other guests. - This is addressed by issing IBPB when we do a guest switch. * Mitigate attacks from guest/ring3->host/ring3. These would require a IBPB during context switch in host, or after VMEXIT. The host process has two ways to mitigate - Either it can be compiled with retpoline - If its going through context switch, and has set !dumpable then there is a IBPB in that path. (Tim's patch: https://patchwork.kernel.org/patch/10192871) - The case where after a VMEXIT you return back to Qemu might make Qemu attackable from guest when Qemu isn't compiled with retpoline. There are issues reported when doing IBPB on every VMEXIT that resulted in some tsc calibration woes in guest. * Mitigate guest/ring0->host/ring0 attacks. When host kernel is using retpoline it is safe against these attacks. If host kernel isn't using retpoline we might need to do a IBPB flush on every VMEXIT. Even when using retpoline for indirect calls, in certain conditions 'ret' can use the BTB on Skylake-era CPUs. There are other mitigations available like RSB stuffing/clearing. * IBPB is issued only for SVM during svm_free_vcpu(). VMX has a vmclear and SVM doesn't. Follow discussion here: https://lkml.org/lkml/2018/1/15/146 Please refer to the following spec for more details on the enumeration and control. Refer here to get documentation about mitigations. https://software.intel.com/en-us/side-channel-security-support [peterz: rebase and changelog rewrite] [karahmed: - rebase - vmx: expose PRED_CMD if guest has it in CPUID - svm: only pass through IBPB if guest has it in CPUID - vmx: support !cpu_has_vmx_msr_bitmap()] - vmx: support nested] [dwmw2: Expose CPUID bit too (AMD IBPB only for now as we lack IBRS) PRED_CMD is a write-only MSR] Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Paolo Bonzini authored
commit 904e14fb upstream. Place the MSR bitmap in struct loaded_vmcs, and update it in place every time the x2apic or APICv state can change. This is rare and the loop can handle 64 MSRs per iteration, in a similar fashion as nested_vmx_prepare_msr_bitmap. This prepares for choosing, on a per-VM basis, whether to intercept the SPEC_CTRL and PRED_CMD MSRs. Suggested-by:
-
Paolo Bonzini authored
commit f21f165e upstream. Group together the calls to alloc_vmcs and loaded_vmcs_init. Soon we'll also allocate an MSR bitmap there. Signed-off-by:
-
Jim Mattson authored
commit de3a0021 upstream. The potential performance advantages of a vmcs02 pool have never been realized. To simplify the code, eliminate the pool. Instead, a single vmcs02 is allocated per VCPU when the VCPU enters VMX operation. Signed-off-by:
Mark Kanda <mark.kanda@oracle.com> Reviewed-by:
Ameya More <ameya.more@oracle.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
David Matlack authored
commit c9f04407 upstream. The host physical addresses of L1's Virtual APIC Page and Posted Interrupt descriptor are loaded into the VMCS02. The CPU may write to these pages via their host physical address while L2 is running, bypassing address-translation-based dirty tracking (e.g. EPT write protection). Mark them dirty on every exit from L2 to prevent them from getting out of sync with dirty tracking. Also mark the virtual APIC page and the posted interrupt descriptor dirty when KVM is virtualizing posted interrupt processing. Signed-off-by:
David Matlack <dmatlack@google.com> Reviewed-by:
-
Radim Krčmář authored
commit d048c098 upstream. msr bitmap can be used to avoid a VM exit (interception) on guest MSR accesses. In some configurations of VMX controls, the guest can even directly access host's x2APIC MSRs. See SDM 29.5 VIRTUALIZING MSR-BASED APIC ACCESSES. L2 could read all L0's x2APIC MSRs and write TPR, EOI, and SELF_IPI. To do so, L1 would first trick KVM to disable all possible interceptions by enabling APICv features and then would turn those features off; nested_vmx_merge_msr_bitmap() only disabled interceptions, so VMX would not intercept previously enabled MSRs even though they were not safe with the new configuration. Correctly re-enabling interceptions is not enough as a second bug would still allow L1+L2 to access host's MSRs: msr bitmap was shared for all VMCSs, so L1 could trigger a race to get the desired combination of msr bitmap and VMX controls. This fix allocates a msr bitmap for every L1 VCPU, allows only safe x2APIC MSRs from L1's msr bitmap, and disables msr bitmaps if they would have to intercept everything anyway. Fixes: 3af18d9c ("KVM: nVMX: Prepare for using hardware MSR bitmap") Reported-by:
Wincy Van <fanwenyi0529@gmail.com> Reviewed-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Takashi Sakamoto authored
commit e11f0f90 upstream. Drivers can implement 'struct snd_pcm_ops.ioctl' to handle some requests from ALSA PCM core. These requests are internal purpose in kernel land. Usually common set of operations are used for it. SNDRV_PCM_IOCTL1_INFO is one of the requests. According to code comment, it has been obsoleted in the old days. We can see old releases in ftp.alsa-project.org. The command was firstly introduced in v0.5.0 release as SND_PCM_IOCTL1_INFO, to allow drivers to fill data of 'struct snd_pcm_channel_info' type. In v0.9.0 release, this was obsoleted by the other commands for ioctl(2) such as SNDRV_PCM_IOCTL_CHANNEL_INFO. This commit removes the long-abandoned command, bye. Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Namhyung Kim authored
[ Upstream commit 70ad35db ] Maybe I'm missing something, but I don't know why it needs to copy the input buffer to psinfo->buf and then write. Instead we can write the input buffer directly. The only implementation that supports console message (i.e. ramoops) already does it for ftrace messages. For the upcoming virtio backend driver, it needs to protect psinfo->buf overwritten from console messages. If it could use ->write_buf method instead of ->write, the problem will be solved easily. Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 164f7e58 ] ocfs2_get_dentry() calls iput(inode) to drop the reference count of inode, and if the reference count hits 0, inode is freed. However, in this function, it then reads inode->i_generation, which may result in a use after free bug. Move the put operation later. Link: http://lkml.kernel.org/r/1543109237-110227-1-git-send-email-bianpan2016@163.com Fixes: 781f200c("ocfs2: Remove masklog ML_EXPORT.") Signed-off-by:
Pan Bian <bianpan2016@163.com> Reviewed-by:
-
Qian Cai authored
[ Upstream commit 8de456cf ] CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to recursive calls. fill_pool kmemleak_ignore make_black_object put_object __call_rcu (kernel/rcu/tree.c) debug_rcu_head_queue debug_object_activate debug_object_init fill_pool kmemleak_ignore make_black_object ... So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly allocated debug objects at all. Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.usSigned-off-by:
Qian Cai <cai@gmx.us> Suggested-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Waiman Long <longman@redhat.com> Acked-by:
-
Pan Bian authored
[ Upstream commit c7d7d620 ] hfs_bmap_free() frees node via hfs_bnode_put(node). However it then reads node->this when dumping error message on an error path, which may result in a use-after-free bug. This patch frees node only when it is never used. Link: http://lkml.kernel.org/r/1543053441-66942-1-git-send-email-bianpan2016@163.comSigned-off-by:
-
Pan Bian authored
[ Upstream commit ce96a407 ] hfs_bmap_free() frees the node via hfs_bnode_put(node). However, it then reads node->this when dumping error message on an error path, which may result in a use-after-free bug. This patch frees the node only when it is never again used. Link: http://lkml.kernel.org/r/1542963889-128825-1-git-send-email-bianpan2016@163.com Fixes: a1185ffa2fc ("HFS rewrite") Signed-off-by:
-
