- 15 Sep, 2016 12 commits
-
-
Piotr Karasinski authored
BugLink: http://bugs.launchpad.net/bugs/1621113 commit 7627e40c upstream. VF0610 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x82". This patch adds the USB ID (0x041E:4080) to snd_usb_get_sample_rate_quirk() list. Signed-off-by:
Piotr Karasinski <peter.karasinski@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Andrew Donnellan authored
BugLink: http://bugs.launchpad.net/bugs/1621113 commit 949e9b82 upstream. In eeh_pci_enable(), after making the request to set the new options, we call eeh_ops->wait_state() to check that the request finished successfully. At the moment, if eeh_ops->wait_state() returns 0, we return 0 without checking that it reflects the expected outcome. This can lead to callers further up the chain incorrectly assuming the slot has been successfully unfrozen and continuing to attempt recovery. On powernv, this will occur if pnv_eeh_get_pe_state() or pnv_eeh_get_phb_state() return 0, which in turn occurs if the relevant OPAL call returns OPAL_EEH_STOPPED_MMIO_DMA_FREEZE or OPAL_EEH_PHB_ERROR respectively. On pseries, this will occur if pseries_eeh_get_state() returns 0, which in turn occurs if RTAS reports that the PE is in the MMIO Stopped and DMA Stopped states. Obviously, none of these cases represent a successful completion of a request to thaw MMIO or DMA. Fix the check so that a wait_state() return value of 0 won't be considered successful for the EEH_OPT_THAW_MMIO or EEH_OPT_THAW_DMA cases. Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Olga Kornievskaia authored
BugLink: http://bugs.launchpad.net/bugs/1621113 commit 9130b8db upstream. It's possible to have simultaneous upcalls for the same UIDs but different GSS service. In that case, we need to allow for the upcall to gssd to proceed so that not the same context is used by two different GSS services. Some servers lock the use of context to the GSS service. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
BugLink: http://bugs.launchpad.net/bugs/1621113 commit 1f4c17a0 upstream. If the connect attempt immediately fails with an EADDRNOTAVAIL error, then that means our choice of source port number was bad. This error is expected when we set the SO_REUSEPORT socket option and we have 2 sockets sharing the same source and destination address and port combinations. Signed-off-by:
-
Dan Williams authored
BugLink: http://bugs.launchpad.net/bugs/1621113 commit d8d378fa upstream. The unit tests crash when hotplug races the previous probe. This race requires that the loading of the nfit_test module be terminated with SIGTERM, and the module to be unloaded while the ars scan is still running. In contrast to the normal nfit driver, the unit test calls acpi_nfit_init() twice to simulate hotplug, whereas the nominal case goes through the acpi_nfit_notify() event handler. The acpi_nfit_notify() path is careful to flush the previous region registration before servicing the hotplug event. The unit test was missing this guarantee. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810cdce7>] pwq_activate_delayed_work+0x47/0x170 [..] Call Trace: [<ffffffff810ce186>] pwq_dec_nr_in_flight+0x66/0xa0 [<ffffffff810ce490>] process_one_work+0x2d0/0x680 [<ffffffff810ce331>] ? process_one_work+0x171/0x680 [<ffffffff810ce88e>] worker_thread+0x4e/0x480 [<ffffffff810ce840>] ? process_one_work+0x680/0x680 [<ffffffff810ce840>] ? process_one_work+0x680/0x680 [<ffffffff810d5343>] kthread+0xf3/0x110 [<ffffffff8199846f>] ret_from_fork+0x1f/0x40 [<ffffffff810d5250>] ? kthread_create_on_node+0x230/0x230 Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Denys Vlasenko authored
BugLink: http://bugs.launchpad.net/bugs/1621113 commit 68187872 upstream. Since instruction decoder now supports EVEX-encoded instructions, two fixes are needed to correctly handle them in uprobes. Extended bits for MODRM.rm field need to be sanitized just like we do it for VEX3, to avoid encoding wrong register for register-relative access. EVEX has _two_ extended bits: b and x. Theoretically, EVEX.x should be ignored by the CPU (since GPRs go only up to 15, not 31), but let's be paranoid here: proper encoding for register-relative access should have EVEX.x = 1. Secondly, we should fetch vex.vvvv for EVEX too. This is now super easy because instruction decoder populates vex_prefix.bytes[2] for all flavors of (e)vex encodings, even for VEX2. Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Fixes: 8a764a87 ("x86/asm/decoder: Create artificial 3rd byte for 2-byte VEX") Link: http://lkml.kernel.org/r/20160811154521.20469-1-dvlasenk@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
BugLink: http://bugs.launchpad.net/bugs/1621113 commit 5cf0791d upstream. There's a subtle preemption race on UP kernels: Usually current->mm (and therefore mm->pgd) stays the same during the lifetime of a task so it does not matter if a task gets preempted during the read and write of the CR3. But then, there is this scenario on x86-UP: TaskA is in do_exit() and exit_mm() sets current->mm = NULL followed by: -> mmput() -> exit_mmap() -> tlb_finish_mmu() -> tlb_flush_mmu() -> tlb_flush_mmu_tlbonly() -> tlb_flush() -> flush_tlb_mm_range() -> __flush_tlb_up() -> __flush_tlb() -> __native_flush_tlb() At this point current->mm is NULL but current->active_mm still points to the "old" mm. Let's preempt taskA _after_ native_read_cr3() by taskB. TaskB has its own mm so CR3 has changed. Now preempt back to taskA. TaskA has no ->mm set so it borrows taskB's mm and so CR3 remains unchanged. Once taskA gets active it continues where it was interrupted and that means it writes its old CR3 value back. Everything is fine because userland won't need its memory anymore. Now the fun part: Let's preempt taskA one more time and get back to taskB. This time switch_mm() won't do a thing because oldmm (->active_mm) is the same as mm (as per context_switch()). So we remain with a bad CR3 / PGD and return to userland. The next thing that happens is handle_mm_fault() with an address for the execution of its code in userland. handle_mm_fault() realizes that it has a PTE with proper rights so it returns doing nothing. But the CPU looks at the wrong PGD and insists that something is wrong and faults again. And again. And one more time… This pagefault circle continues until the scheduler gets tired of it and puts another task on the CPU. It gets little difficult if the task is a RT task with a high priority. The system will either freeze or it gets fixed by the software watchdog thread which usually runs at RT-max prio. But waiting for the watchdog will increase the latency of the RT task which is no good. Fix this by disabling preemption across the critical code section. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1470404259-26290-1-git-send-email-bigeasy@linutronix.de [ Prettified the changelog. ] Signed-off-by:
-
Kirill A. Shutemov authored
BugLink: http://bugs.launchpad.net/bugs/1621113 commit c17b1f42 upstream. We account HugeTLB's shared page table to all processes who share it. The accounting happens during huge_pmd_share(). If somebody populates pud entry under us, we should decrease pagetable's refcount and decrease nr_pmds of the process. By mistake, I increase nr_pmds again in this case. :-/ It will lead to "BUG: non-zero nr_pmds on freeing mm: 2" on process' exit. Let's fix this by increasing nr_pmds only when we're sure that the page table will be used. Link: http://lkml.kernel.org/r/20160617122506.GC6534@node.shutemov.name Fixes: dc6c9a35 ("mm: account pmd page tables to the process") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
zhongjiang <zhongjiang@huawei.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mukesh Ojha authored
BugLink: http://bugs.launchpad.net/bugs/1619552 In a situation, where Linux kernel gets notified about duplicate error log from OPAL, it is been observed that kernel fails to remove sysfs entries (/sys/firmware/opal/elog/0xXXXXXXXX) of such error logs. This is because, we currently search the error log/dump kobject in the kset list via 'kset_find_obj()' routine. Which eventually increment the reference count by one, once it founds the kobject. So, unless we decrement the reference count by one after it found the kobject, we would not be able to release the kobject properly later. This patch adds the 'kobject_put()' which was missing earlier. Signed-off-by:
Mukesh Ojha <mukesh02@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Reviewed-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> (cherry picked from commit a9cbf0b2) Signed-off-by:
Brad Figg <brad.figg@canonical.com> Signed-off-by:
-
Timo Aaltonen authored
BugLink: http://bugs.launchpad.net/bugs/1619756Signed-off-by:
Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by:
-
Ville Syrjälä authored
BugLink: http://bugs.launchpad.net/bugs/1619756 Let's be nice and interrupt the dpcd aux-dev reads/writes when there's a signal pending. Much nicer if the user can hit ^C instead of having to sit around waiting for the read/write to finish. time dd if=/dev/drm_dp_aux0 bs=$((1024*1024)) ^C before: real 0m34.681s user 0m0.003s sys 0m6.880s after: real 0m0.222s user 0m0.006s sys 0m0.057s Cc: Rafael Antognolli <rafael.antognolli@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461786225-7790-1-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit 36230cb5) Signed-off-by:
-
Rafael Antognolli authored
BugLink: http://bugs.launchpad.net/bugs/1619756 This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by:
Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by:
-
- 14 Sep, 2016 4 commits
-
-
Bryant G. Ly authored
BugLink: http://bugs.launchpad.net/bugs/1615665 SUPPORTED_FORMATS is 1 << 1 so it's never zero. Signed-off-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by:
Michael Cyr <mikecyr@linux.vnet.ibm.com> Signed-off-by:
-
Bryant G. Ly authored
BugLink: http://bugs.launchpad.net/bugs/1615665Signed-off-by:
-
Michael Cyr authored
BugLink: http://bugs.launchpad.net/bugs/1615665 If an error status is passed to target_complete_cmd, then by default it queues the command to target_complete_failure_work, which will generate Logical Unit Communication Failure sense data, overwriting any sense data already set in the command. This means that any sense data returned by TCMU does not get returned to the fabric module. This change implements a transport_complete function for target-user which will set the SCF_TRANSPORT_TASK_SENSE flag if we have valid sense data, which will cause target_complete_cmd to queue the command to target_complete_ok_work instead of target_complete_failure_work. Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
-
Bryant G. Ly authored
BugLink: http://bugs.launchpad.net/bugs/1615665 The driver currently doesn't properly deregisters target sessions completely, so this will address that. Signed-off-by:
-
- 08 Sep, 2016 1 commit
-
-
Mauricio Faria de Oliveira authored
BugLink: http://bugs.launchpad.net/bugs/1618151 This patch leverages 'struct pci_host_bridge' from the PCI subsystem in order to free the pci_controller only after the last reference to its devices is dropped (avoiding an oops in pcibios_release_device() if the last reference is dropped after pcibios_free_controller()). The patch relies on pci_host_bridge.release_fn() (and .release_data), which is called automatically by the PCI subsystem when the root bus is released (i.e., the last reference is dropped). Those fields are set via pci_set_host_bridge_release() (e.g. in the platform-specific implementation of pcibios_root_bridge_prepare()). It introduces the 'pcibios_free_controller_deferred()' .release_fn() and it expects .release_data to hold a pointer to the pci_controller. The function implictly calls 'pcibios_free_controller()', so an user must *NOT* explicitly call it if using the new _deferred() callback. The functionality is enabled for pseries (although it isn't platform specific, and may be used by cxl). Details on not-so-elegant design choices: - Use 'pci_host_bridge.release_data' field as pointer to associated 'struct pci_controller' so *not* to 'pci_bus_to_host(bridge->bus)' in pcibios_free_controller_deferred(). That's because pci_remove_root_bus() sets 'host_bridge->bus = NULL' (so, if the last reference is released after pci_remove_root_bus() runs, which eventually reaches pcibios_free_controller_deferred(), that would hit a null pointer dereference). The cxl/vphb.c code calls pci_remove_root_bus(), and the cxl folks are interested in this fix. Test-case #1 (hold references) # ls -ld /sys/block/sd* | grep -m1 0021:01:00.0 <...> /sys/block/sdaa -> ../devices/pci0021:01/0021:01:00.0/<...> # ls -ld /sys/block/sd* | grep -m1 0021:01:00.1 <...> /sys/block/sdab -> ../devices/pci0021:01/0021:01:00.1/<...> # cat >/dev/sdaa & pid1=$! # cat >/dev/sdab & pid2=$! # drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r Validating PHB DLPAR capability...yes. [ 594.306719] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01 [ 594.306738] pci_hp_remove_devices: Removing 0021:01:00.0... ... [ 598.236381] pci_hp_remove_devices: Removing 0021:01:00.1... ... [ 611.972077] pci_bus 0021:01: busn_res: [bus 01-ff] is released [ 611.972140] rpadlpar_io: slot PHB 33 removed # kill -9 $pid1 # kill -9 $pid2 [ 632.918088] pcibios_free_controller_deferred: domain 33, dynamic 1 Test-case #2 (don't hold references) # drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r Validating PHB DLPAR capability...yes. [ 916.357363] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01 [ 916.357386] pci_hp_remove_devices: Removing 0021:01:00.0... ... [ 920.566527] pci_hp_remove_devices: Removing 0021:01:00.1... ... [ 933.955873] pci_bus 0021:01: busn_res: [bus 01-ff] is released [ 933.955977] pcibios_free_controller_deferred: domain 33, dynamic 1 [ 933.955999] rpadlpar_io: slot PHB 33 removed Suggested-By:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Reviewed-by:
Chris J Arges <chris.j.arges@canonical.com>
-
- 06 Sep, 2016 8 commits
-
-
Seth Forshee authored
BugLink: http://bugs.launchpad.net/bugs/1617550 Building fuse as a module fails because this symbol is not exported. Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Thomas Gleixner authored
BugLink: http://bugs.launchpad.net/bugs/1572630 queue_for_each_ctx() iterates over per_cpu variables under the assumption that the possible cpu mask cannot have holes. That's wrong as all cpumasks can have holes. In case there are holes the iteration ends up accessing uninitialized memory and crashing as a result. Replace the macro by a proper for_each_possible_cpu() loop and drop the unused macro blk_ctx_sum() which references queue_for_each_ctx(). Reported-by:
Xiong Zhou <jencce.kernel@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Jens Axboe <axboe@fb.com> (back ported from commit 897bb0c7) Signed-off-by:
-
Raghavendra K T authored
BugLink: http://bugs.launchpad.net/bugs/1572630 hctx->cpumask is already populated and let the tag cpumask follow that instead of going through a new for loop. Signed-off-by:
Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Eric Desrochers <eric.desrochers@canonical.com> Acked-by:
-
Tim Gardner authored
Ignore: yes Signed-off-by: -
Tim Gardner authored
Signed-off-by: -
Eric W. Biederman authored
BugLink: http://bugs.launchpad.net/bugs/1612135 Seth Forshee reported a mount regression in nfs autmounts with "fs: Add user namespace member to struct super_block". It turns out that the assumption that current->cred is something reasonable during mount while necessary to improve support of unprivileged mounts is wrong in the automount path. To fix the existing filesystems override current->cred with the init_cred before calling d_automount and restore current->cred after d_automount completes. To support unprivileged mounts would require a more nuanced cred selection, so fail on unprivileged mounts for the time being. As none of the filesystems that currently set FS_USERNS_MOUNT implement d_automount this check is only good for preventing future problems. Fixes: 6e4eab57 ("fs: Add user namespace member to struct super_block") Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> (backported from commit aeaa4a79) Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Colin King <colin.king@canonical.com> Acked-by:
-
Seth Forshee authored
BugLink: http://bugs.launchpad.net/bugs/1612135 This reverts commit d15123a5 in order to replace it with the more generic upstream fix. Signed-off-by:
-
Andy Whitcroft authored
The Ubuntu backport of the below commit necessarily had to follow the changes to is_ovl_whiteout. In the process the wrong dentry was passed preventing correct detection of legacy whitouts in a rename over a whitout on some upper filesystem types (at least ramfs): commit 11f37104 Author: Miklos Szeredi <mszeredi@redhat.com> Date: Mon Mar 21 17:31:44 2016 +0100 ovl: verify upper dentry before unlink and rename Pass the correct dentry to allow detection of the appropriate whiteout types. Fixes: 11f37104 ("ovl: verify upper dentry before unlink and rename") in Ubuntu BugLink: http://bugs.launchpad.net/bugs/1618572Signed-off-by:
Andy Whitcroft <apw@canonical.com> Acked-by:
-
- 30 Aug, 2016 1 commit
-
-
Tim Gardner authored
Ignore: yes Signed-off-by:
-
- 29 Aug, 2016 14 commits
-
-
Tim Gardner authored
Signed-off-by: -
Adrian Hunter authored
BugLink: http://bugs.launchpad.net/bugs/1591655 Previous patches added support for Intel's AVX-512 instructions to the kernel and perf tools instruction decoders. AVX-512 instructions are documented in Intel Architecture Instruction Set Extensions Programming Reference (February 2016). Add a representative set of instructions to perf's "new instructions" test. e.g. perf test "new instructions" Or to view a particular instruction: perf test -v "new instructions" 2>&1 | grep vbroadcasti64x4 Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dan Williams <dan.j.williams@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: X86 ML <x86@kernel.org> Link: http://lkml.kernel.org/r/1469003437-32706-5-git-send-email-adrian.hunter@intel.comSigned-off-by:
-
Adrian Hunter authored
BugLink: http://bugs.launchpad.net/bugs/1591655 Add support for Intel's AVX-512 instructions to perf tools instruction decoder used by Intel PT. The kernel's instruction decoder was updated in a previous patch. AVX-512 instructions are documented in Intel Architecture Instruction Set Extensions Programming Reference (February 2016). AVX-512 instructions are identified by a EVEX prefix which, for the purpose of instruction decoding, can be treated as though it were a 4-byte VEX prefix. Existing instructions which can now accept an EVEX prefix need not be further annotated in the op code map (x86-opcode-map.txt). In the case of new instructions, the op code map is updated accordingly. Also add associated Mask Instructions that are used to manipulate mask registers used in AVX-512 instructions. A representative set of instructions is added to the perf tools new instructions test in a subsequent patch. Signed-off-by:
-
Adrian Hunter authored
BugLink: http://bugs.launchpad.net/bugs/1591655 Add support for Intel's AVX-512 instructions to the instruction decoder. AVX-512 instructions are documented in Intel Architecture Instruction Set Extensions Programming Reference (February 2016). AVX-512 instructions are identified by a EVEX prefix which, for the purpose of instruction decoding, can be treated as though it were a 4-byte VEX prefix. Existing instructions which can now accept an EVEX prefix need not be further annotated in the op code map (x86-opcode-map.txt). In the case of new instructions, the op code map is updated accordingly. Also add associated Mask Instructions that are used to manipulate mask registers used in AVX-512 instructions. The 'perf tools' instruction decoder is updated in a subsequent patch. And a representative set of instructions is added to the perf tools new instructions test in a subsequent patch. Signed-off-by:
-
Adrian Hunter authored
BugLink: http://bugs.launchpad.net/bugs/1591655 vcvtph2ps does not have an immediate operand, so remove the erroneous 'Ib' from its opcode map entry. Add vcvtph2ps to the perf tools new instructions test to verify it. Signed-off-by:
-
James Smart authored
BugLink: http://bugs.launchpad.net/bugs/1608652 Correct issue with ioremap() call on 32bit kernel Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> (cherry picked from commit 115a4124) Signed-off-by:
-
Len Brown authored
BugLink: http://bugs.launchpad.net/bugs/1591802 SKX has a lot in common with HSX Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> (cherry picked from commit ec53e594) Signed-off-by:
-
Len Brown authored
BugLink: http://bugs.launchpad.net/bugs/1591802 Hard-code BXT ART to 19200MHz, so turbostat --debug can fully enumerate TSC: CPUID(0x15): eax_crystal: 3 ebx_tsc: 186 ecx_crystal_hz: 0 TSC: 1190 MHz (19200000 Hz * 186 / 3 / 1000000) Signed-off-by:
-
Len Brown authored
BugLink: http://bugs.launchpad.net/bugs/1591802 Broxton has a lot in common with SKL Signed-off-by:
-
Len Brown authored
BugLink: http://bugs.launchpad.net/bugs/1591802 Some processors use the Interrupt Response Time Limit (IRTL) MSR value to describe the maximum IRQ response time latency for deep package C-states. (Though others have the register, but do not use it) Lets print it out to give insight into the cases where it is used. IRTL begain in SNB, with PC3/PC6/PC7, and HSW added PC8/PC9/PC10. Signed-off-by:
-
Len Brown authored
BugLink: http://bugs.launchpad.net/bugs/1591802 The CPUID.SGX bit was printed, even if --debug was used Signed-off-by:
-
Chen Yu authored
BugLink: http://bugs.launchpad.net/bugs/1591802 MSR_CONFIG_TDP_NOMINAL: should print all 8 bits of base_ratio (bit 0:7) 0xFF MSR_CONFIG_TDP_LEVEL_1: should print all 15 bits of PKG_MIN_PWR_LVL1 (bit 48:62) 0x7FFF should print all 15 bits of PKG_MAX_PWR_LVL1 (bit 32:46) 0x7FFF should print all 8 bits of LVL1_RATIO (bit 16:23) 0xFF should print all 15 bits of PKG_TDP_LVL1 (bit 0:14) 0x7FFF And the same modification to MSR_CONFIG_TDP_LEVEL_2. MSR_TURBO_ACTIVATION_RATIO: should print all 8 bits of MAX_NON_TURBO_RATIO (bit 0:7) 0xFF Signed-off-by:
Chen Yu <yu.c.chen@intel.com> Signed-off-by:
-
Len Brown authored
BugLink: http://bugs.launchpad.net/bugs/1591802 MSR_NHM_SNB_PKG_CST_CFG_CTL: 0x1e008008 (...pkg-cstate-limit=0: unlimited) should print as MSR_NHM_SNB_PKG_CST_CFG_CTL: 0x1e008008 (...pkg-cstate-limit=8: unlimited) Signed-off-by:
-
Len Brown authored
BugLink: http://bugs.launchpad.net/bugs/1591802 turbostat already checks whether calling each cpuid leavf is legal, and it doesn't look at the function return value, so call the simpler gcc intrinsic __cpuid() instead of __get_cpuid(). syntax only, no functional change Signed-off-by:
-
