- 04 Nov, 2019 10 commits
-
-
Chuhong Yuan authored
The driver uses clk_prepare_enable in ulite_probe but uses clk_unprepare in ulite_remove, which does not match. Replace clk_unprepare with clk_disable_unprepare to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191101085433.10399-1-hslester96@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Frank Wunderlich authored
As platform_get_irq() now prints an error when the interrupt does not exist, this warnings are printed on bananapi-r2: [ 4.935780] mt6577-uart 11004000.serial: IRQ index 1 not found [ 4.962589] 11002000.serial: ttyS1 at MMIO 0x11002000 (irq = 202, base_baud = 1625000) is a ST16650V2 [ 4.972127] mt6577-uart 11002000.serial: IRQ index 1 not found [ 4.998927] 11003000.serial: ttyS2 at MMIO 0x11003000 (irq = 203, base_baud = 1625000) is a ST16650V2 [ 5.008474] mt6577-uart 11003000.serial: IRQ index 1 not found Fix this by calling platform_get_irq_optional() instead. now it looks like this: [ 4.872751] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Fixes: 7723f4c5 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191027062117.20389-1-frank-w@public-files.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Shevchenko authored
Since the commit 7723f4c5 ("driver core: platform: Add an error message to platform_get_irq*()") platform_get_irq() started issuing an error message. Thus, there is no need to have the same in the driver Fixes: 7723f4c5 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191023103558.51862-1-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeffrey Hugo authored
hci_qca interfaces to the wcn3990 via a uart_dm on the msm8998 mtp and Lenovo Miix 630 laptop. As part of initializing the wcn3990, hci_qca disables flow, configures the uart baudrate, and then reenables flow - at which point an event is expected to be received over the uart from the wcn3990. It is observed that this event comes after the baudrate change but before hci_qca re-enables flow. This is unexpected, and is a result of msm_reset() being broken. According to the uart_dm hardware documentation, it is recommended that automatic hardware flow control be enabled by setting RX_RDY_CTL. Auto hw flow control will manage RFR based on the configured watermark. When there is space to receive data, the hw will assert RFR. When the watermark is hit, the hw will de-assert RFR. The hardware documentation indicates that RFR can me manually managed via CR when RX_RDY_CTL is not set. SET_RFR asserts RFR, and RESET_RFR de-asserts RFR. msm_reset() is broken because after resetting the hardware, it unconditionally asserts RFR via SET_RFR. This enables flow regardless of the current configuration, and would undo a previous flow disable operation. It should instead de-assert RFR via RESET_RFR to block flow until the hardware is reconfigured. msm_serial should rely on the client to specify that flow should be enabled, either via mctrl() or the termios structure, and only assert RFR in response to those triggers. Fixes: 04896a77 ("msm_serial: serial driver for MSM7K onboard serial peripheral.") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable <stable@vger.kernel.org> Reviewed-by: Andy Gross <agross@kernel.org> Link: https://lore.kernel.org/r/20191021154616.25457-1-jeffrey.l.hugo@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sudip Mukherjee authored
The build of xtensa allmodconfig gives warning of: In function 'get_ports.isra.0': warning: the frame size of 1040 bytes is larger than 1024 bytes Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20191018161712.27807-1-sudipm.mukherjee@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geert Uytterhoeven authored
Document support for the SCIF and HSCIF serial ports in the Renesas R-Car M3-W+ (R8A77961) SoC. Update all references to R-Car M3-W from "r8a7796" to "r8a77960", to avoid confusion between R-Car M3-W (R8A77960) and M3-W+. No driver update is needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20191023123010.12501-1-geert+renesas@glider.beSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrey Smirnov authored
LPUART driver does not support 'rs485-rts-delay' or 'rs485-rx-during-tx' properties. Remove them. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Chris Healy <cphealy@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-imx@nxp.com Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20191022044940.15119-1-andrew.smirnov@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Philippe Schenker authored
This commits adds RS485 support for LPUART hardware that uses 32-bit registers. These are typically found in i.MX8 processors. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20191017141428.10330-3-philippe.schenker@toradex.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Philippe Schenker authored
Use define from the 32-bit register description UARTMODIR_* instead of UARTMODEM_*. The value is the same, so there is no functional change. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20191017141428.10330-2-philippe.schenker@toradex.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Philippe Schenker authored
Currently flow control is not working due to lpuart32_set_mctrl that is clearing TXCTSE bit in all cases. This bit gets earlier setup by lpuart32_set_termios. As I read in Documentation set_mctrl is also not meant for hardware flow control rather than gpio setting and clearing a RTS signal. Therefore I guess it is safe to remove the whole code in lpuart32_set_mctrl. This was tested with console on a i.MX8QXP SoC. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20191017141428.10330-1-philippe.schenker@toradex.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 27 Oct, 2019 8 commits
-
-
Greg Kroah-Hartman authored
We want the tty/serial fix in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two fixes for the VMWare guest support: - Unbreak VMWare platform detection which got wreckaged by converting an integer constant to a string constant. - Fix the clang build of the VMWAre hypercall by explicitely specifying the ouput register for INL instead of using the short form" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/vmware: Fix platform detection VMWARE_PORT macro x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvm
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A small set of fixes for time(keeping): - Add a missing include to prevent compiler warnings. - Make the VDSO implementation of clock_getres() POSIX compliant again. A recent change dropped the NULL pointer guard which is required as NULL is a valid pointer value for this function. - Fix two function documentation typos" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Fix two trivial comments timers/sched_clock: Include local timekeeping.h for missing declarations lib/vdso: Make clock_getres() POSIX compliant again
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A set of perf fixes: kernel: - Unbreak the tracking of auxiliary buffer allocations which got imbalanced causing recource limit failures. - Fix the fallout of splitting of ToPA entries which missed to shift the base entry PA correctly. - Use the correct context to lookup the AUX event when unmapping the associated AUX buffer so the event can be stopped and the buffer reference dropped. tools: - Fix buildiid-cache mode setting in copyfile_mode_ns() when copying /proc/kcore - Fix freeing id arrays in the event list so the correct event is closed. - Sync sched.h anc kvm.h headers with the kernel sources. - Link jvmti against tools/lib/ctype.o to have weak strlcpy(). - Fix multiple memory and file descriptor leaks, found by coverity in perf annotate. - Fix leaks in error handling paths in 'perf c2c', 'perf kmem', found by a static analysis tool" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/aux: Fix AUX output stopping perf/aux: Fix tracking of auxiliary trace buffer allocation perf/x86/intel/pt: Fix base for single entry topa perf kmem: Fix memory leak in compact_gfp_flags() tools headers UAPI: Sync sched.h with the kernel tools headers kvm: Sync kvm.h headers with the kernel sources tools headers kvm: Sync kvm headers with the kernel sources tools headers kvm: Sync kvm headers with the kernel sources perf c2c: Fix memory leak in build_cl_output() perf tools: Fix mode setting in copyfile_mode_ns() perf annotate: Fix multiple memory and file descriptor leaks perf tools: Fix resource leak of closedir() on the error paths perf evlist: Fix fix for freed id arrays perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "Two fixes for interrupt controller drivers: - Skip IRQ_M_EXT entries in the device tree when initializing the RISCV PLIC controller to avoid a double init attempt. - Use the correct ITS list when issuing the VMOVP synchronization command so the operation works only on the ITS instances which are associated to a VM" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/sifive-plic: Skip contexts except supervisor in plic_init() irqchip/gic-v3-its: Use the exact ITSList for VMOVP
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Seven cifs/smb3 fixes, including three for stable" * tag '5.4-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix cifsInodeInfo lock_sem deadlock when reconnect occurs CIFS: Fix use after free of file info structures CIFS: Fix retry mid list corruption on reconnects cifs: Fix missed free operations CIFS: avoid using MID 0xFFFF cifs: clarify comment about timestamp granularity for old servers cifs: Handle -EINPROGRESS only when noblockcnt is set
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Several minor fixes and cleanups for v5.4-rc5: - Three build fixes for various SPARSEMEM-related kernel configurations - Two cleanup patches for the kernel bug and breakpoint trap handler code" * tag 'riscv/for-v5.4-rc5-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: cleanup do_trap_break riscv: cleanup <asm/bug.h> riscv: Fix undefined reference to vmemmap_populate_basepages riscv: Fix implicit declaration of 'page_to_section' riscv: fix fs/proc/kcore.c compilation with sparsemem enabled
-
- 26 Oct, 2019 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: "A few MIPS fixes: - Fix VDSO time-related function behavior for systems where we need to fall back to syscalls, but were instead returning bogus results. - A fix to TLB exception handlers for Cavium Octeon systems where they would inadvertently clobber the $1/$at register. - A build fix for bcm63xx configurations. - Switch to using my @kernel.org email address" * tag 'mips_fixes_5.4_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: tlbex: Fix build_restore_pagemask KScratch restore MIPS: bmips: mark exception vectors as char arrays mips: vdso: Fix __arch_get_hw_counter() MAINTAINERS: Use @kernel.org address for Paul Burton
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fix from Greg KH: "Here is a single tty/serial driver fix for 5.4-rc5 that resolves a reported issue. It has been in linux-next for a while with no problems" * tag 'tty-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: 8250-men-mcb: fix error checking when get_num_ports returns -ENODEV
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fix from Greg KH: "Here is a single staging driver fix, for the wlan-ng driver, that resolves a reported issue. It is been in linux-next for a while with no reported issues" * tag 'staging-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fix from Greg KH: "Here is a single sysfs fix for 5.4-rc5. It resolves an error if you actually try to use the __BIN_ATTR_WO() macro, seems I never tested it properly before :( This has been in linux-next for a while with no reported issues" * tag 'driver-core-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: Fixes __BIN_ATTR_WO() macro
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull binder fix from Greg KH: "This is a single binder fix to resolve a reported issue by Jann. It's been in linux-next for a while with no reported issues" * tag 'char-misc-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: binder: Don't modify VMA bounds in ->mmap handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.4-rc5. More "fun" with some of the misc USB drivers as found by syzbot, and there are a number of other small bugfixes in here for reported issues. All have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdns3: Error out if USB_DR_MODE_UNKNOWN in cdns3_core_init_role() USB: ldusb: fix read info leaks USB: serial: ti_usb_3410_5052: clean up serial data access USB: serial: ti_usb_3410_5052: fix port-close races USB: usblp: fix use-after-free on disconnect usb: udc: lpc32xx: fix bad bit shift operation usb: cdns3: Fix dequeue implementation. USB: legousbtower: fix a signedness bug in tower_probe() USB: legousbtower: fix memleak on disconnect USB: ldusb: fix memleak on disconnect
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "A few driver fixes for the I2C subsystem" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: stm32f7: remove warning when compiling with W=1 i2c: stm32f7: fix a race in slave mode with arbitration loss irq i2c: stm32f7: fix first byte to send in slave mode i2c: mt65xx: fix NULL ptr dereference i2c: aspeed: fix master pending state handling
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block and io_uring fixes from Jens Axboe: "A bit bigger than usual at this point in time, mostly due to some good bug hunting work by Pavel that resulted in three io_uring fixes from him and two from me. Anyway, this pull request contains: - Revert of the submit-and-wait optimization for io_uring, it can't always be done safely. It depends on commands always making progress on their own, which isn't necessarily the case outside of strict file IO. (me) - Series of two patches from me and three from Pavel, fixing issues with shared data and sequencing for io_uring. - Lastly, two timeout sequence fixes for io_uring (zhangyi) - Two nbd patches fixing races (Josef) - libahci regulator_get_optional() fix (Mark)" * tag 'for-linus-2019-10-26' of git://git.kernel.dk/linux-block: nbd: verify socket is supported during setup ata: libahci_platform: Fix regulator_get_optional() misuse nbd: handle racing with error'ed out commands nbd: protect cmd->status with cmd->lock io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD io_uring: used cached copies of sq->dropped and cq->overflow io_uring: Fix race for sqes with userspace io_uring: Fix broken links with offloading io_uring: Fix corrupted user_data io_uring: correct timeout req sequence when inserting a new entry io_uring : correct timeout req sequence when waiting timeout io_uring: revert "io_uring: optimize submit_and_wait API"
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - Add R_390_GLOB_DAT relocation type support. This fixes boot problem on linux-next. - Fix memory leak in zcrypt * tag 's390-5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/kaslr: add support for R_390_GLOB_DAT relocation type s390/zcrypt: fix memleak at release
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixlet from Juergen Gross: "Just one patch for issuing a deprecation warning for 32-bit Xen pv guests" * tag 'for-linus-5.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: issue deprecation warning for 32-bit pv guest
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fix from Christoph Hellwig: "Fix a regression in the intel-iommu get_required_mask conversion (Arvind Sankar)" * tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mapping: iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull dax fix from Dan Williams: "Fix a performance regression that followed from a fix to the conversion of the fsdax implementation to the xarray. v5.3 users report that they stop seeing huge page mappings on an application + filesystem layout that was seeing huge pages previously on v5.2" * tag 'dax-fix-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: fs/dax: Fix pmd vs pte conflict detection
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Nine changes, eight to drivers (qla2xxx, hpsa, lpfc, alua, ch, 53c710[x2], target) and one core change that tries to close a race between sysfs delete and module removal" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: remove left-over BUILD_NVME defines scsi: core: try to get module before removing device scsi: hpsa: add missing hunks in reset-patch scsi: target: core: Do not overwrite CDB byte 1 scsi: ch: Make it possible to open a ch device multiple times again scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE scsi: sni_53c710: fix compilation error scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions scsi: qla2xxx: fix a potential NULL pointer dereference
-
- 25 Oct, 2019 9 commits
-
-
Christoph Hellwig authored
If we always compile the get_break_insn_length inline function we can remove the ifdefs and let dead code elimination take care of the warn branch that is now unreadable because the report_bug stub always returns BUG_TRAP_TYPE_BUG. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fix from Dmitry Torokhov: "A fix for st1232 driver to properly report coordinates for 2nd and subsequent fingers when more than one is on the surface" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: st1232 - fix reporting multitouch coordinates
-
Mike Christie authored
nbd requires socket families to support the shutdown method so the nbd recv workqueue can be woken up from its sock_recvmsg call. If the socket does not support the callout we will leave recv works running or get hangs later when the device or module is removed. This adds a check during socket connection/reconnection to make sure the socket being passed in supports the needed callout. Reported-by: syzbot+24c12fa8d218ed26011a@syzkaller.appspotmail.com Fixes: e9e006f5 ("nbd: fix max number of supported devs") Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Mark Brown authored
This driver is using regulator_get_optional() to handle all the supplies that it handles, and only ever enables and disables all supplies en masse without ever doing any other configuration of the device to handle missing power. These are clear signs that the API is being misused - it should only be used for supplies that may be physically absent from the system and in these cases the hardware usually needs different configuration if the supply is missing. Instead use normal regualtor_get(), if the supply is not described in DT then the framework will substitute a dummy regulator in so no special handling is needed by the consumer driver. In the case of the PHY regulator the handling in the driver is a hack to deal with integrated PHYs; the supplies are only optional in the sense that that there's some confusion in the code about where they're bound to. From a code point of view they function exactly as normal supplies so can be treated as such. It'd probably be better to model this by instantiating a PHY object for integrated PHYs. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Josef Bacik authored
We hit the following warning in production print_req_error: I/O error, dev nbd0, sector 7213934408 flags 80700 ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60 Workqueue: knbd-recv recv_work [nbd] RIP: 0010:refcount_sub_and_test_checked+0x53/0x60 Call Trace: blk_mq_free_request+0xb7/0xf0 blk_mq_complete_request+0x62/0xf0 recv_work+0x29/0xa1 [nbd] process_one_work+0x1f5/0x3f0 worker_thread+0x2d/0x3d0 ? rescuer_thread+0x340/0x340 kthread+0x111/0x130 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x1f/0x30 ---[ end trace b079c3c67f98bb7c ]--- This was preceded by us timing out everything and shutting down the sockets for the device. The problem is we had a request in the queue at the same time, so we completed the request twice. This can actually happen in a lot of cases, we fail to get a ref on our config, we only have one connection and just error out the command, etc. Fix this by checking cmd->status in nbd_read_stat. We only change this under the cmd->lock, so we are safe to check this here and see if we've already error'ed this command out, which would indicate that we've completed it as well. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Josef Bacik authored
We already do this for the most part, except in timeout and clear_req. For the timeout case we take the lock after we grab a ref on the config, but that isn't really necessary because we're safe to touch the cmd at this point, so just move the order around. For the clear_req cause this is initiated by the user, so again is safe. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linuxLinus Torvalds authored
Pull modules fixes from Jessica Yu: - Revert __ksymtab_$namespace.$symbol naming scheme back to __ksymtab_$symbol, as it was causing issues with depmod. Instead, have modpost extract a symbol's namespace from __kstrtabns and __ksymtab_strings. - Fix `make nsdeps` for out of tree kernel builds (make O=...) caused by unescaped '/'. Use a different sed delimiter to avoid this problem. * tag 'modules-for-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: scripts/nsdeps: use alternative sed delimiter symbol namespaces: revert to previous __ksymtab name scheme modpost: make updating the symbol namespace explicit modpost: delegate updating namespaces to separate function
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A slightly larger set of fixes have accrued in the last two weeks. Mostly a collection of the usual smaller fixes: - Marvell Armada: USB phy setup issues on Turris Mox - Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some maintainer updates. - OMAP: Fixlets for display config, interrupt settings for wifi, some clock/PM pieces. Also IOMMU regression fix and a ti-sysc no-watchdog regression fix. - i.MX: A few fixes around PM/settings, some devicetree fixlets and catching up with config option changes in DRM - Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display panel settings ... and some smaller fixes for Davinci (backlight, McBSP DMA), Allwinner (phy regulators, PMU removal on A64, etc)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 MAINTAINERS: Update the Spreadtrum SoC maintainer MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue bus: ti-sysc: Fix watchdog quirk handling ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs ARM: davinci_all_defconfig: enable GPIO backlight ARM: davinci: dm365: Fix McBSP dma_slave_map entry ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk ARM: dts: imx7s: Correct GPT's ipg clock source ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' ARM: dts: imx6q-logicpd: Re-Enable SNVS power key arm64: dts: lx2160a: Correct CPU core idle state name mailmap: Add Simon Arlott (replacement for expired email address) arm64: dts: rockchip: Fix override mode for rk3399-kevin panel ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Bugfixes for ARM, PPC and x86, plus selftest improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: Don't leak L1 MMIO regions to L2 KVM: SVM: Fix potential wrong physical id in avic_handle_ldr_update kvm: clear kvmclock MSR on reset KVM: x86: fix bugon.cocci warnings KVM: VMX: Remove specialized handling of unexpected exit-reasons selftests: kvm: fix sync_regs_test with newer gccs selftests: kvm: vmx_dirty_log_test: skip the test when VMX is not supported selftests: kvm: consolidate VMX support checks selftests: kvm: vmx_set_nested_state_test: don't check for VMX support twice KVM: Don't shrink/grow vCPU halt_poll_ns if host side polling is disabled selftests: kvm: synchronize .gitignore to Makefile kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID KVM: arm64: pmu: Reset sample period on overflow handling KVM: arm64: pmu: Set the CHAINED attribute before creating the in-kernel event arm64: KVM: Handle PMCR_EL0.LC as RES1 on pure AArch64 systems KVM: arm64: pmu: Fix cycle counter truncation KVM: PPC: Book3S HV: XIVE: Ensure VP isn't already in use
-