Additional updates of the generic power domains (genpd) framework
(support for devices attached to multiple domains) and the cpupower
utility (minor fixes) for 4.18-rc1.

* pm-domains:
  PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains
  PM / Domains: Add support for multi PM domains per device to genpd
  PM / Domains: Split genpd_dev_pm_attach()
  PM / Domains: Don't attach devices in genpd with multi PM domains
  PM / Domains: dt: Allow power-domain property to be a list of specifiers

* pm-tools:
  cpupower : Fix header name to read idle state name
  cpupower: fix spelling mistake: "logilename" -> "logfilename"

Additional cpufreq updates for 4.18-rc1: fixes and cleanups in the
core and drivers and intel_pstate extension to do iowait boosting
on systems with HWP that improves performance quite a bit.

* pm-cpufreq:
  cpufreq: imx6q: check speed grades for i.MX6ULL
  cpufreq: governors: Fix long idle detection logic in load calculation
  cpufreq: intel_pstate: enable boost for Skylake Xeon
  cpufreq: intel_pstate: New sysfs entry to control HWP boost
  cpufreq: intel_pstate: HWP boost performance on IO wakeup
  cpufreq: intel_pstate: Add HWP boost utility and sched util hooks
  cpufreq: ti-cpufreq: Use devres managed API in probe()
  cpufreq: ti-cpufreq: Fix an incorrect error return value
  cpufreq: ACPI: make function acpi_cpufreq_fast_switch() static
  cpufreq: kryo: allow building as a loadable module

Revert commit 1e837861 (PM / runtime: Fixup reference counting of
device link suppliers at probe), as it has introduced a regression
and the condition it was designed to address should be covered by the
existing code.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Check the max speed supported from the fuses for i.MX6ULL and update the
operating points table accordingly.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

According to current code implementation, detecting the long
idle period is done by checking if the interval between two
adjacent utilization update handlers is long enough. Although
this mechanism can detect if the idle period is long enough
(no utilization hooks invoked during idle period), it might
not cover a corner case: if the task has occupied the CPU
for too long which causes no context switches during that
period, then no utilization handler will be launched until this
high prio task is scheduled out. As a result, the idle_periods
field might be calculated incorrectly because it regards the
100% load as 0% and makes the conservative governor who uses
this field confusing.

Change the detection to compare the idle_time with sampling_rate
directly.
Reported-by: Artem S. Tashkinov <t.artem@mailcity.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Enable HWP boost on Skylake server and workstations.
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently we export event_count instead of wakeup_count via the
per-device wakeup_count sysfs attribute. Change it to wakeup_count
to make it more meaningful.

wakeup_count increments only when events_check_enabled is set,
that is whenever writes the current wakeup count to
/sys/power/wakeup_count.  Also events_check_enabled is cleared on
every resume. User space is expected to write to this just before
suspend.  This way pm_wakeup_event(), when called from IRQs handles,
will increment wakeup_count only if we are in system-wide
suspend-resume cycle and should give a fair approximation of how many
times a device may have triggered a wakeup from system suspend.

event_count on the other hand will increment every time
pm_wakeup_event() is called irrespective of whether we are in a
suspend-resume cycle and some drivers call it on every interrupt
which makes it less useful for system wakeup tracking.
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The existing dev_pm_domain_attach() function, allows a single PM domain to
be attached per device. To be able to support devices that are partitioned
across multiple PM domains, let's introduce a new interface,
dev_pm_domain_attach_by_id().

The dev_pm_domain_attach_by_id() returns a new allocated struct device with
the corresponding attached PM domain. This enables for example a driver to
operate on the new device from a power management point of view. The driver
may then also benefit from using the received device, to set up so called
device-links towards its original device. Depending on the situation, these
links may then be dynamically changed.

The new interface is typically called by drivers during their probe phase,
in case they manages devices which uses multiple PM domains. If that is the
case, the driver also becomes responsible of managing the detaching of the
PM domains, which typically should be done at the remove phase. Detaching
is done by calling the existing dev_pm_domain_detach() function and for
each of the received devices from dev_pm_domain_attach_by_id().

Note, currently its only genpd that supports multiple PM domains per
device, but dev_pm_domain_attach_by_id() can easily by extended to cover
other PM domain types, if/when needed.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

To support devices being partitioned across multiple PM domains, let's
begin with extending genpd to cope with these kind of configurations.

Therefore, add a new exported function genpd_dev_pm_attach_by_id(), which
is similar to the existing genpd_dev_pm_attach(), but with the difference
that it allows its callers to provide an index to the PM domain that it
wants to attach.

Note that, genpd_dev_pm_attach_by_id() shall only be called by the driver
core / PM core, similar to how the existing dev_pm_domain_attach() makes
use of genpd_dev_pm_attach(). However, this is implemented by following
changes on top.

Because, only one PM domain can be attached per device, genpd needs to
create a virtual device that it can attach/detach instead. More precisely,
let the new function genpd_dev_pm_attach_by_id() register a virtual struct
device via calling device_register(). Then let it attach this device to the
corresponding PM domain, rather than the one that is provided by the
caller. The actual attaching is done via re-using the existing genpd OF
functions.

At successful attachment, genpd_dev_pm_attach_by_id() returns the created
virtual device, which allows the caller to operate on it to deal with power
management. Following changes on top, provides more details in this
regards.

To deal with detaching of a PM domain for the multiple PM domains case,
let's also extend the existing genpd_dev_pm_detach() function, to cover the
cleanup of the created virtual device, via make it call device_unregister()
on it. In this way, there is no need to introduce a new function to deal
with detach for the multiple PM domain case, but instead the existing one
is re-used.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

To extend genpd to deal with allowing multiple PM domains per device, some
of the code in genpd_dev_pm_attach() can be re-used. Let's prepare for this
by moving some of the code into a sub-function.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The power-domain DT property may now contain a list of PM domain
specifiers, which represents that a device are partitioned across multiple
PM domains. This leads to a new situation in genpd_dev_pm_attach(), as only
one PM domain can be attached per device.

To remain things simple for the most common configuration, when a single PM
domain is used, let's treat the multiple PM domain case as being specific.

In other words, let's change genpd_dev_pm_attach() to check for multiple PM
domains and prevent it from attach any PM domain for this case. Instead,
leave this to be managed separately, from following changes to genpd.
Suggested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

To be able to describe topologies where devices are partitioned across
multiple power domains, let's extend the power-domain property to allow
being a list of PM domain specifiers.
Suggested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull cpupower updates for v4.18-rc1 from Shuah Khan:

"This cpupower update for 4.18-rc1 consists of two minor fixes."

* tag 'linux-cpupower-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
  cpupower : Fix header name to read idle state name
  cpupower: fix spelling mistake: "logilename" -> "logfilename"

A new attribute is added to intel_pstate sysfs to enable/disable
HWP dynamic performance boost.
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This change uses SCHED_CPUFREQ_IOWAIT flag to boost HWP performance.
Since SCHED_CPUFREQ_IOWAIT flag is set frequently, we don't start
boosting steps unless we see two consecutive flags in two ticks. This
avoids boosting due to IO because of regular system activities.

To avoid synchronization issues, the actual processing of the flag is
done on the local CPU callback.
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Added two utility functions to HWP boost up gradually and boost down to
the default cached HWP request values.

Boost up:
Boost up updates HWP request minimum value in steps. This minimum value
can reach upto at HWP request maximum values depends on how frequently,
this boost up function is called. At max, boost up will take three steps
to reach the maximum, depending on the current HWP request levels and HWP
capabilities. For example, if the current settings are:
If P0 (Turbo max) = P1 (Guaranteed max) = min
        No boost at all.
If P0 (Turbo max) > P1 (Guaranteed max) = min
        Should result in one level boost only for P0.
If P0 (Turbo max) = P1 (Guaranteed max) > min
        Should result in two level boost:
                (min + p1)/2 and P1.
If P0 (Turbo max) > P1 (Guaranteed max) > min
        Should result in three level boost:
                (min + p1)/2, P1 and P0.
We don't set any level between P0 and P1 as there is no guarantee that
they will be honored.

Boost down:
After the system is idle for hold time of 3ms, the HWP request is reset
to the default value from HWP init or user modified one via sysfs.

Caching of HWP Request and Capabilities
Store the HWP request value last set using MSR_HWP_REQUEST and read
MSR_HWP_CAPABILITIES. This avoid reading of MSRs in the boost utility
functions.

These boost utility functions calculated limits are based on the latest
HWP request value, which can be modified by setpolicy() callback. So if
user space modifies the minimum perf value, that will be accounted for
every time the boost up is called. There will be case when there can be
contention with the user modified minimum perf, in that case user value
will gain precedence. For example just before HWP_REQUEST MSR is updated
from setpolicy() callback, the boost up function is called via scheduler
tick callback. Here the cached MSR value is already the latest and limits
are updated based on the latest user limits, but on return the MSR write
callback called from setpolicy() callback will update the HWP_REQUEST
value. This will be used till next time the boost up function is called.

In addition add a variable to control HWP dynamic boosting. When HWP
dynamic boost is active then set the HWP specific update util hook. The
contents in the utility hooks will be filled in the subsequent patches.
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The ti_cpufreq_probe() function uses regular kzalloc to allocate
the ti_cpufreq_data structure and kfree for freeing this memory
on failures. Simplify this code by using the devres managed
API.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 05829d94 (cpufreq: ti-cpufreq: kfree opp_data when
failure) has fixed a memory leak in the failure path, however
the patch returned a positive value on get_cpu_device() failure
instead of the previous negative value. Fix this incorrect error
return value properly.

Fixes: 05829d94 (cpufreq: ti-cpufreq: kfree opp_data when failure)
Cc: 4.14+ <stable@vger.kernel.org> # v4.14+
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The acpi_cpufreq_fast_switch() function is local to the source and
does not need to be in global scope, so make it static.

Cleans up sparse warning:
drivers/cpufreq/acpi-cpufreq.c:468:14: warning: symbol
'acpi_cpufreq_fast_switch' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Building the kryo cpufreq driver while QCOM_SMEM is a loadable module
results in a link error:

drivers/cpufreq/qcom-cpufreq-kryo.o: In function `qcom_cpufreq_kryo_probe':
qcom-cpufreq-kryo.c:(.text+0xbc): undefined reference to `qcom_smem_get'

The problem is that Kconfig ignores interprets the dependency as met
when the dependent symbol is a 'bool' one. By making it 'tristate',
it will be forced to be a module here, which builds successfully.

Fixes: 46e2856b (cpufreq: Add Kryo CPU scaling driver)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull power management updates from Rafael Wysocki:
 "These include a significant update of the generic power domains
  (genpd) and Operating Performance Points (OPP) frameworks, mostly
  related to the introduction of power domain performance levels,
  cpufreq updates (new driver for Qualcomm Kryo processors, updates of
  the existing drivers, some core fixes, schedutil governor
  improvements), PCI power management fixes, ACPI workaround for
  EC-based wakeup events handling on resume from suspend-to-idle, and
  major updates of the turbostat and pm-graph utilities.

  Specifics:

   - Introduce power domain performance levels into the the generic
     power domains (genpd) and Operating Performance Points (OPP)
     frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).

   - Fix two issues in the runtime PM framework related to the
     initialization and removal of devices using device links (Ulf
     Hansson).

   - Clean up the initialization of drivers for devices in PM domains
     (Ulf Hansson, Geert Uytterhoeven).

   - Fix a cpufreq core issue related to the policy sysfs interface
     causing CPU online to fail for CPUs sharing one cpufreq policy in
     some situations (Tao Wang).

   - Make it possible to use platform-specific suspend/resume hooks in
     the cpufreq-dt driver and make the Armada 37xx DVFS use that
     feature (Viresh Kumar, Miquel Raynal).

   - Optimize policy transition notifications in cpufreq (Viresh Kumar).

   - Improve the iowait boost mechanism in the schedutil cpufreq
     governor (Patrick Bellasi).

   - Improve the handling of deferred frequency updates in the schedutil
     cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki,
     Viresh Kumar).

   - Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).

   - Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
     Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh
     Kumar).

   - Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set
     and update stale comments in the PCI core PM code (Rafael Wysocki).

   - Work around an issue related to the handling of EC-based wakeup
     events in the ACPI PM core during resume from suspend-to-idle if
     the EC has been put into the low-power mode (Rafael Wysocki).

   - Improve the handling of wakeup source objects in the PM core (Doug
     Berger, Mahendran Ganesh, Rafael Wysocki).

   - Update the driver core to prevent deferred probe from breaking
     suspend/resume ordering (Feng Kan).

   - Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
     Wysocki).

   - Make the core suspend/resume code and cpufreq support the RT patch
     (Sebastian Andrzej Siewior, Thomas Gleixner).

   - Consolidate the PM QoS handling in cpuidle governors (Rafael
     Wysocki).

   - Fix a possible crash in the hibernation core (Tetsuo Handa).

   - Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David
     Wu).

   - Update the turbostat utility (fixes, cleanups, new CPU IDs, new
     command line options, built-in "Low Power Idle" counters support,
     new POLL and POLL% columns) and add an entry for it to MAINTAINERS
     (Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
     Prarit Bhargava, Srinivas Pandruvada).

   - Update the pm-graph to version 5.1 (Todd Brandt).

   - Update the intel_pstate_tracer utility (Doug Smythies)"

* tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits)
  tools/power turbostat: update version number
  tools/power turbostat: Add Node in output
  tools/power turbostat: add node information into turbostat calculations
  tools/power turbostat: remove num_ from cpu_topology struct
  tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node
  tools/power turbostat: track thread ID in cpu_topology
  tools/power turbostat: Calculate additional node information for a package
  tools/power turbostat: Fix node and siblings lookup data
  tools/power turbostat: set max_num_cpus equal to the cpumask length
  tools/power turbostat: if --num_iterations, print for specific number of iterations
  tools/power turbostat: Add Cannon Lake support
  tools/power turbostat: delete duplicate #defines
  x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
  tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
  tools/power turbostat: add POLL and POLL% column
  tools/power turbostat: Fix --hide Pk%pc10
  tools/power turbostat: Build-in "Low Power Idle" counters support
  tools/power turbostat: Don't make man pages executable
  tools/power turbostat: remove blank lines
  tools/power turbostat: a small C-states dump readability immprovement
  ...

Pull block fixes from Jens Axboe:
 "This just contains the dm kzalloc fix that was discussed, and a fix
  that I queued up yesterday for a case where blk-mq doesn't honor the
  stop bit appropriately"

* tag 'for-linus-20180605' of git://git.kernel.dk/linux-block:
  dm: Use kzalloc for all structs with embedded biosets/mempools
  blk-mq: return when hctx is stopped in blk_mq_run_work_fn

Merge faddr2line updates from Josh Poimboeuf:

 - revert faddr2line's default output to its original non-code-listing
   output, and make the code listing an optional feature

 - give faddr2line a real maintainer, so get_maintainer.pl will actually
   CC me on future patches

* emailed patches from Josh Poimboeuf <jpoimboe@redhat.com>:
  MAINTAINERS: add Josh Poimboeuf as faddr2line maintainer
  scripts/faddr2line: make the new code listing format optional

... so I finally get credit for my greatest accomplishment.

And, less importantly, so get_maintainer.pl will actually CC me on
future patches.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6870c016 ("scripts/faddr2line: show the code context")
radically altered the output format of the faddr2line tool.  And while
the new list output format might have merit it broke my vim usage and
was hard to read.

Make the new format optional; using a '--list' argument and attempt to
make the output slightly easier to read by adding a little whitespace to
separate the different files and explicitly mark the line in question.

Cc: Changbin Du <changbin.du@intel.com>
Fixes: 6870c016 ("scripts/faddr2line: show the code context")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mempool_init()/bioset_init() require that the mempools/biosets be zeroed
first; they probably should not _require_ this, but not allocating those
structs with kzalloc is a fairly nonsensical thing to do (calling
mempool_exit()/bioset_exit() on an uninitialized mempool/bioset is legal
and safe, but only works if said memory was zeroed.)
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull x86 hyperv updates from Thomas Gleixner:
 "A set of commits to enable APIC enlightenment when running as a guest
  on Microsoft HyperV.

  This accelerates the APIC access with paravirtualization techniques,
  which are called enlightenments on Hyper-V"

* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Hyper-V/hv_apic: Build the Hyper-V APIC conditionally
  x86/Hyper-V/hv_apic: Include asm/apic.h
  X86/Hyper-V: Consolidate the allocation of the hypercall input page
  X86/Hyper-V: Consolidate code for converting cpumask to vpset
  X86/Hyper-V: Enhanced IPI enlightenment
  X86/Hyper-V: Enable IPI enlightenments
  X86/Hyper-V: Enlighten APIC access

Pull x86 cache resource controller updates from Thomas Gleixner:
 "An update for the Intel Resource Director Technolgy (RDT) which adds a
  feedback driven software controller to runtime adjust the bandwidth
  allocation MSRs.

  This makes the allocations more accurate and allows to use bandwidth
  values in understandable units (MB/s) instead of using percentage
  based allocations as the original, still available, interface.

  The software controller can be enabled with a new mount option for the
  resctrl filesystem"

* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel_rdt/mba_sc: Feedback loop to dynamically update mem bandwidth
  x86/intel_rdt/mba_sc: Prepare for feedback loop
  x86/intel_rdt/mba_sc: Add schemata support
  x86/intel_rdt/mba_sc: Add initialization support
  x86/intel_rdt/mba_sc: Enable/disable MBA software controller
  x86/intel_rdt/mba_sc: Documentation for MBA software controller(mba_sc)

Pull time/Y2038 updates from Thomas Gleixner:

 - Consolidate SySV IPC UAPI headers

 - Convert SySV IPC to the new COMPAT_32BIT_TIME mechanism

 - Cleanup the core interfaces and standardize on the ktime_get_* naming
   convention.

 - Convert the X86 platform ops to timespec64

 - Remove the ugly temporary timespec64 hack

* 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  x86: Convert x86_platform_ops to timespec64
  timekeeping: Add more coarse clocktai/boottime interfaces
  timekeeping: Add ktime_get_coarse_with_offset
  timekeeping: Standardize on ktime_get_*() naming
  timekeeping: Clean up ktime_get_real_ts64
  timekeeping: Remove timespec64 hack
  y2038: ipc: Redirect ipc(SEMTIMEDOP, ...) to compat_ksys_semtimedop
  y2038: ipc: Enable COMPAT_32BIT_TIME
  y2038: ipc: Use __kernel_timespec
  y2038: ipc: Report long times to user space
  y2038: ipc: Use ktime_get_real_seconds consistently
  y2038: xtensa: Extend sysvipc data structures
  y2038: powerpc: Extend sysvipc data structures
  y2038: sparc: Extend sysvipc data structures
  y2038: parisc: Extend sysvipc data structures
  y2038: mips: Extend sysvipc data structures
  y2038: arm64: Extend sysvipc compat data structures
  y2038: s390: Remove unneeded ipc uapi header files
  y2038: ia64: Remove unneeded ipc uapi header files
  y2038: alpha: Remove unneeded ipc uapi header files
  ...

Pull timers and timekeeping updates from Thomas Gleixner:

 - Core infrastucture work for Y2038 to address the COMPAT interfaces:

     + Add a new Y2038 safe __kernel_timespec and use it in the core
       code

     + Introduce config switches which allow to control the various
       compat mechanisms

     + Use the new config switch in the posix timer code to control the
       32bit compat syscall implementation.

 - Prevent bogus selection of CPU local clocksources which causes an
   endless reselection loop

 - Remove the extra kthread in the clocksource code which has no value
   and just adds another level of indirection

 - The usual bunch of trivial updates, cleanups and fixlets all over the
   place

 - More SPDX conversions

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  clocksource/drivers/mxs_timer: Switch to SPDX identifier
  clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier
  clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier
  clocksource/drivers/timer-imx-gpt: Remove outdated file path
  clocksource/drivers/arc_timer: Add comments about locking while read GFRC
  clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages
  clocksource/drivers/sprd: Fix Kconfig dependency
  clocksource: Move inline keyword to the beginning of function declarations
  timer_list: Remove unused function pointer typedef
  timers: Adjust a kernel-doc comment
  tick: Prefer a lower rating device only if it's CPU local device
  clocksource: Remove kthread
  time: Change nanosleep to safe __kernel_* types
  time: Change types to new y2038 safe __kernel_* types
  time: Fix get_timespec64() for y2038 safe compat interfaces
  time: Add new y2038 safe __kernel_timespec
  posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME
  time: Introduce CONFIG_COMPAT_32BIT_TIME
  time: Introduce CONFIG_64BIT_TIME in architectures
  compat: Enable compat_get/put_timespec64 always
  ...

Pull x86 RAS updates from Thomas Gleixner:

 - Fix a stack out of bounds write in the MCE error injection code.

 - Avoid IPIs during CPU hotplug to read the MCx_MISC block address from
   a remote CPU. That's fragile and pointless because the block
   addresses are the same on all CPUs. So they can be read once and
   local.

 - Add support for MCE broadcasting on newer VIA Centaur CPUs.

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/MCE/AMD: Read MCx_MISC block addresses on any CPU
  x86/MCE: Fix stack out-of-bounds write in mce-inject.c: Flags_read()
  x86/MCE: Enable MCE broadcasting on new Centaur CPUs

Pull irq updates from Thomas Gleixner:

 - Consolidation of softirq pending:

   The softirq mask and its accessors/mutators have many implementations
   scattered around many architectures. Most do the same things
   consisting in a field in a per-cpu struct (often irq_cpustat_t)
   accessed through per-cpu ops. We can provide instead a generic
   efficient version that most of them can use. In fact s390 is the only
   exception because the field is stored in lowcore.

 - Support for level!?! triggered MSI (ARM)

   Over the past couple of years, we've seen some SoCs coming up with
   ways of signalling level interrupts using a new flavor of MSIs, where
   the MSI controller uses two distinct messages: one that raises a
   virtual line, and one that lowers it. The target MSI controller is in
   charge of maintaining the state of the line.

   This allows for a much simplified HW signal routing (no need to have
   hundreds of discrete lines to signal level interrupts if you already
   have a memory bus), but results in a departure from the current idea
   the kernel has of MSIs.

 - Support for Meson-AXG GPIO irqchip

 - Large stm32 irqchip rework (suspend/resume, hierarchical domains)

 - More SPDX conversions

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  ARM: dts: stm32: Add exti support to stm32mp157 pinctrl
  ARM: dts: stm32: Add exti support for stm32mp157c
  pinctrl/stm32: Add irq_eoi for stm32gpio irqchip
  irqchip/stm32: Add suspend/resume support for hierarchy domain
  irqchip/stm32: Add stm32mp1 support with hierarchy domain
  irqchip/stm32: Prepare common functions
  irqchip/stm32: Add host and driver data structures
  irqchip/stm32: Add suspend support
  irqchip/stm32: Add falling pending register support
  irqchip/stm32: Checkpatch fix
  irqchip/stm32: Optimizes and cleans up stm32-exti irq_domain
  irqchip/meson-gpio: Add support for Meson-AXG SoCs
  dt-bindings: interrupt-controller: New binding for Meson-AXG SoC
  dt-bindings: interrupt-controller: Fix the double quotes
  softirq/s390: Move default mutators of overwritten softirq mask to s390
  softirq/x86: Switch to generic local_softirq_pending() implementation
  softirq/sparc: Switch to generic local_softirq_pending() implementation
  softirq/powerpc: Switch to generic local_softirq_pending() implementation
  softirq/parisc: Switch to generic local_softirq_pending() implementation
  softirq/ia64: Switch to generic local_softirq_pending() implementation
  ...

Pull x86 dax updates from Ingo Molnar:
 "This contains x86 memcpy_mcsafe() fault handling improvements the
  nvdimm tree would like to make more use of"

* 'x86-dax-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()
  x86/asm/memcpy_mcsafe: Add write-protection-fault handling
  x86/asm/memcpy_mcsafe: Return bytes remaining
  x86/asm/memcpy_mcsafe: Add labels for __memcpy_mcsafe() write fault handling
  x86/asm/memcpy_mcsafe: Remove loop unrolling

Pull x86 debug updates from Ingo Molnar:
 "This contains the x86 oops code printing reorganization and cleanups
  from Borislav Betkov, with a particular focus in enhancing opcode
  dumping all around"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/dumpstack: Explain the reasoning for the prologue and buffer size
  x86/dumpstack: Save first regs set for the executive summary
  x86/dumpstack: Add a show_ip() function
  x86/fault: Dump user opcode bytes on fatal faults
  x86/dumpstack: Add loglevel argument to show_opcodes()
  x86/dumpstack: Improve opcodes dumping in the code section
  x86/dumpstack: Carve out code-dumping into a function
  x86/dumpstack: Unexport oops_begin()
  x86/dumpstack: Remove code_bytes

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apm: Fix spelling mistake: "caculate" -> "calculate"
  x86/mtrr: Rename main.c to mtrr.c and remove duplicate prefixes
  x86: Remove pr_fmt duplicate logging prefixes
  x86/early-quirks: Rename duplicate define of dev_err
  x86/bpf: Clean up non-standard comments, to make the code more readable

Pull x86 build updates from Ingo Molnar:
 "A handful of build system (Makefile, linker script) cleanups by
  Masahiro Yamada"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build/vdso: Put generated linker scripts to $(obj)/
  x86/build/vdso: Remove unnecessary export in Makefile
  x86/build/vdso: Remove unused $(vobjs-nox32) in Makefile
  x86/build: Remove no-op macro VMLINUX_SYMBOL()

Pull x86 asm updates from Ingo Molnar:

 - better support (non-atomic) 64-bit readq()/writeq() variants (Andy
   Shevchenko)

 - __clear_user() micro-optimization (Alexey Dobriyan)

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/io: Define readq()/writeq() to use 64-bit type
  x86/asm/64: Micro-optimize __clear_user() - Use immediate constants

Pull x86 boot updates from Ingo Molnar:

 - Centaur CPU updates (David Wang)

 - AMD and other CPU topology enumeration improvements and fixes
   (Borislav Petkov, Thomas Gleixner, Suravee Suthikulpanit)

 - Continued 5-level paging work (Kirill A. Shutemov)

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Mark __pgtable_l5_enabled __initdata
  x86/mm: Mark p4d_offset() __always_inline
  x86/mm: Introduce the 'no5lvl' kernel parameter
  x86/mm: Stop pretending pgtable_l5_enabled is a variable
  x86/mm: Unify pgtable_l5_enabled usage in early boot code
  x86/boot/compressed/64: Fix trampoline page table address calculation
  x86/CPU: Move x86_cpuinfo::x86_max_cores assignment to detect_num_cpu_cores()
  x86/Centaur: Report correct CPU/cache topology
  x86/CPU: Move cpu_detect_cache_sizes() into init_intel_cacheinfo()
  x86/CPU: Make intel_num_cpu_cores() generic
  x86/CPU: Move cpu local function declarations to local header
  x86/CPU/AMD: Derive CPU topology from CPUID function 0xB when available
  x86/CPU: Modify detect_extended_topology() to return result
  x86/CPU/AMD: Calculate last level cache ID from number of sharing threads
  x86/CPU: Rename intel_cacheinfo.c to cacheinfo.c
  perf/events/amd/uncore: Fix amd_uncore_llc ID to use pre-defined cpu_llc_id
  x86/CPU/AMD: Have smp_num_siblings and cpu_llc_id always be present
  x86/Centaur: Initialize supported CPU features properly

Pull scheduler updates from Ingo Molnar:

 - power-aware scheduling improvements (Patrick Bellasi)

 - NUMA balancing improvements (Mel Gorman)

 - vCPU scheduling fixes (Rohit Jain)

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Update util_est before updating schedutil
  sched/cpufreq: Modify aggregate utilization to always include blocked FAIR utilization
  sched/deadline/Documentation: Add overrun signal and GRUB-PA documentation
  sched/core: Distinguish between idle_cpu() calls based on desired effect, introduce available_idle_cpu()
  sched/wait: Include <linux/wait.h> in <linux/swait.h>
  sched/numa: Stagger NUMA balancing scan periods for new threads
  sched/core: Don't schedule threads on pre-empted vCPUs
  sched/fair: Avoid calling sync_entity_load_avg() unnecessarily
  sched/fair: Rearrange select_task_rq_fair() to optimize it

Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - x86 Intel uncore driver cleanups and enhancements (Kan Liang)

   - group scheduling and other fixes (Song Liu

   - store frame pointer in the sample traces for better profiling
     (Alexey Budankov)

   - compat fixes/enhancements (Eugene Syromiatnikov)

  Tooling side changes, which you can build and install in a single step
  via:

      make -C tools/perf clean install

  perf annotate:

   - Support 'perf annotate --group' for non-explicit recorded event
     "groups", showing multiple columns, one for each event, just like
     when dealing with explicit event groups (those enclosed with {})
     (Jin Yao)

   - Record min/max LBR cycles (>= Skylake) and add 'perf annotate' TUI
     hotkey to show it (c) (Jin Yao)

  perf bpf:

   - Add infrastructure to help in writing eBPF C programs to be used
     with '-e name.c' type events in tools such as 'record' and 'trace',
     with headers for common constructs and an examples directory that
     will get populated as we add more such helpers and the 'perf bpf'
     (Arnaldo Carvalho de Melo)

  perf stat:

   - Display time in precision based on std deviation (Jiri Olsa)

   - Add --table option to display time of each run (Jiri Olsa)

   - Display length strings of each run for --table option (Jiri Olsa)

  perf buildid-cache:

   - Add --list and --purge-all options (Ravi Bangoria)

  perf test:

   - Let 'perf test list' display subtests (Hendrik Brueckner)

  perf pti:

   - Create extra kernel maps to help in decoding samples in x86 PTI
     entry trampolines (Adrian Hunter)

   - Copy x86 PTI entry trampoline sections in the kcore copy used for
     annotation and intel_pt CPU traces decoding (Adrian Hunter)

  ... and a lot of other fixes, enhancements and cleanups I did not
  list, see the shortlog and git log for details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
  perf/x86/intel/uncore: Clean up client IMC uncore
  perf/x86/intel/uncore: Expose uncore_pmu_event*() functions
  perf/x86/intel/uncore: Support IIO free-running counters on SKX
  perf/x86/intel/uncore: Add infrastructure for free running counters
  perf/x86/intel/uncore: Add new data structures for free running counters
  perf/x86/intel/uncore: Correct fixed counter index check in generic code
  perf/x86/intel/uncore: Correct fixed counter index check for NHM
  perf/x86/intel/uncore: Introduce customized event_read() for client IMC uncore
  perf/x86: Store user space frame-pointer value on a sample
  perf/core: Wire up compat PERF_EVENT_IOC_QUERY_BPF, PERF_EVENT_IOC_MODIFY_ATTRIBUTES
  perf/core: Fix bad use of igrab()
  perf/core: Fix group scheduling with mixed hw and sw events
  perf kcore_copy: Amend the offset of sections that remap kernel text
  perf kcore_copy: Copy x86 PTI entry trampoline sections
  perf kcore_copy: Get rid of kernel_map
  perf kcore_copy: Iterate phdrs
  perf kcore_copy: Layout sections
  perf kcore_copy: Calculate offset from phnum
  perf kcore_copy: Keep a count of phdrs
  perf kcore_copy: Keep phdr data in a list
  ...