- 08 Dec, 2021 19 commits
-
-
Sean Christopherson authored
Drop the @mem param from kvm_arch_{prepare,commit}_memory_region() now that its use has been removed in all architectures. No functional change intended. Signed-off-by:Sean Christopherson <seanjc@google.com> Reviewed-by:
Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by:
-
Sean Christopherson authored
Get the slot ID, hva, etc... from the "new" memslot instead of the userspace memory region when preparing/committing a memory region. This will allow a future commit to drop @mem from the prepare/commit hooks once all architectures convert to using "new". Opportunistically wait to get the various "new" values until after filtering out the DELETE case in anticipation of a future commit passing NULL for @new when deleting a memslot. Signed-off-by:
-
Sean Christopherson authored
Get the number of pages directly from the new memslot instead of computing the same from the userspace memory region when allocating memslot metadata. This will allow a future patch to drop @mem. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Get the gfn, size, and hva from the new memslot instead of the userspace memory region when preparing/committing memory region changes. This will allow a future commit to drop the @mem param. Note, this has a subtle functional change as KVM would previously reject DELETE if userspace provided a garbage userspace_addr or guest_phys_addr, whereas KVM zeros those fields in the "new" memslot when deleting an existing memslot. Arguably the old behavior is more correct, but there's zero benefit into requiring userspace to provide sane values for hva and gfn. Signed-off-by:
-
Sean Christopherson authored
For PPC HV, get the number of pages directly from the new memslot instead of computing the same from the userspace memory region, and explicitly check for !DELETE instead of inferring the same when toggling mmio_update. The motivation for these changes is to avoid referencing the @mem param so that it can be dropped in a future commit. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Remove an old (circa 2012) kvm_debug from kvm_arch_commit_memory_region() to print basic information when committing a memslot change. The primary motivation for removing the kvm_debug is to avoid using @mem, the user memory region, so that said param can be removed. Alternatively, the debug message could be converted to use @new, but that would require synthesizing select state to play nice with the DELETED case, which will pass NULL for @new in the future. And there's no argument to be had for dumping generic information in an arch callback, i.e. if there's a good reason for the debug message, then it belongs in common KVM code where all architectures can benefit. Signed-off-by:
-
Sean Christopherson authored
Get the slot ID, hva, etc... from the "new" memslot instead of the userspace memory region when preparing/committing a memory region. This will allow a future commit to drop @mem from the prepare/commit hooks once all architectures convert to using "new". Opportunistically wait to get the hva begin+end until after filtering out the DELETE case in anticipation of a future commit passing NULL for @new when deleting a memslot. Signed-off-by:
-
Sean Christopherson authored
Pass the "old" slot to kvm_arch_prepare_memory_region() and force arch code to handle propagating arch specific data from "new" to "old" when necessary. This is a baby step towards dynamically allocating "new" from the get go, and is a (very) minor performance boost on x86 due to not unnecessarily copying arch data. For PPC HV, copy the rmap in the !CREATE and !DELETE paths, i.e. for MOVE and FLAGS_ONLY. This is functionally a nop as the previous behavior would overwrite the pointer for CREATE, and eventually discard/ignore it for DELETE. For x86, copy the arch data only for FLAGS_ONLY changes. Unlike PPC HV, x86 needs to reallocate arch data in the MOVE case as the size of x86's allocations depend on the alignment of the memslot's gfn. Opportunistically tweak kvm_arch_prepare_memory_region()'s param order to match the "commit" prototype. Signed-off-by:
-
Sean Christopherson authored
Now that the address space ID is stored in every slot, including fake slots used for deletion, use the slot's as_id instead of passing in the redundant information as a param to kvm_set_memslot(). This will greatly simplify future memslot work by avoiding passing a large number of variables around purely to honor @as_id. Drop a comment in the DELETE path about new->as_id being provided purely for debug, as that's now a lie. No functional change intended. Signed-off-by:
-
Maciej S. Szmigiero authored
There is no need to copy the whole memslot data after releasing slots_arch_lock for a moment to install temporary memslots copy in kvm_set_memslot() since this lock only protects the arch field of each memslot. Just resync this particular field after reacquiring slots_arch_lock. Note, this also eliminates the need to manually clear the INVALID flag when restoring memslots; the "setting" of the INVALID flag was an unwanted side effect of copying the entire memslots. Since kvm_copy_memslots() has just one caller remaining now open-code it instead. Signed-off-by:
-
Sean Christopherson authored
Fold kvm_delete_memslot() into __kvm_set_memory_region() to free up the "kvm_delete_memslot()" name for use in a future helper. The delete logic isn't so complex/long that it truly needs a helper, and it will be simplified a wee bit further in upcoming commits. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Explicitly disallow creating more memslot pages than can fit in an unsigned long, KVM doesn't correctly handle a total number of memslot pages that doesn't fit in an unsigned long and remedying that would be a waste of time. For a 64-bit kernel, this is a nop as memslots are not allowed to overlap in the gfn address space. With a 32-bit kernel, userspace can at most address 3gb of virtual memory, whereas wrapping the total number of pages would require 4tb+ of guest physical memory. Even with x86's second address space for SMM, userspace would need to alias all of guest memory more than one _thousand_ times. And on older x86 hardware with MAXPHYADDR < 43, the guest couldn't actually access any of those aliases even if userspace lied about guest.MAXPHYADDR. On 390 and arm64, this is a nop as they don't support 32-bit hosts. On x86, practically speaking this is simply acknowledging reality as the existing kvm_mmu_calculate_default_mmu_pages() assumes the total number of pages fits in an "unsigned long". On PPC, this is likely a nop as every flavor of PPC KVM assumes gfns (and gpas!) fit in unsigned long. arch/powerpc/kvm/book3s_32_mmu_host.c goes a step further and fails the build if CONFIG_PTE_64BIT=y, which presumably means that it does't support 64-bit physical addresses. On MIPS, this is also likely a nop as the core MMU helpers assume gpas fit in unsigned long, e.g. see kvm_mips_##name##_pte. And finally, RISC-V is a "don't care" as it doesn't exist in any release, i.e. there is no established ABI to break. Signed-off-by:
-
Marc Zyngier authored
Now that the vcpu array is backed by an xarray, use the optimised iterator that matches the underlying data structure. Suggested-by:
Marc Zyngier <maz@kernel.org> Message-Id: <20211116160403.4074052-8-maz@kernel.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Marc Zyngier authored
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu index. Unfortunately, we're about to move rework the iterator, which requires this to be upgrade to an unsigned long. Let's bite the bullet and repaint all of it in one go. Signed-off-by:
-
Marc Zyngier authored
At least on arm64 and x86, the vcpus array is pretty huge (up to 1024 entries on x86) and is mostly empty in the majority of the cases (running 1k vcpu VMs is not that common). This mean that we end-up with a 4kB block of unused memory in the middle of the kvm structure. Instead of wasting away this memory, let's use an xarray instead, which gives us almost the same flexibility as a normal array, but with a reduced memory usage with smaller VMs. Signed-off-by:
-
Marc Zyngier authored
As we are about to change the way vcpus are allocated, mandate the use of kvm_get_vcpu() instead of open-coding the access. Reviewed-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by:
-
Marc Zyngier authored
As we are about to change the way vcpus are allocated, mandate the use of kvm_get_vcpu() instead of open-coding the access. Reviewed-by:
Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by:
-
Marc Zyngier authored
All architectures have similar loops iterating over the vcpus, freeing one vcpu at a time, and eventually wiping the reference off the vcpus array. They are also inconsistently taking the kvm->lock mutex when wiping the references from the array. Make this code common, which will simplify further changes. The locking is dropped altogether, as this should only be called when there is no further references on the kvm structure. Reviewed-by:
-
Paolo Bonzini authored
Fix the number of bits in the role, and simplify the explanation of why several bits or combinations of bits are redundant. Signed-off-by:
-
- 05 Dec, 2021 3 commits
-
-
Tom Lendacky authored
Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT exit code or exit parameters fails. The VMGEXIT instruction can be issued from userspace, even though userspace (likely) can't update the GHCB. To prevent userspace from being able to kill the guest, return an error through the GHCB when validation fails rather than terminating the guest. For cases where the GHCB can't be updated (e.g. the GHCB can't be mapped, etc.), just return back to the guest. The new error codes are documented in the lasest update to the GHCB specification. Fixes: 291bd20d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <b57280b5562893e2616257ac9c2d4525a9aeeb42.1638471124.git.thomas.lendacky@amd.com> Signed-off-by:
-
Sean Christopherson authored
Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so that KVM falls back to __vmalloc() if physically contiguous memory isn't available. The buffer is purely a KVM software construct, i.e. there's no need for it to be physically contiguous. Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Sean Christopherson authored
Return appropriate error codes if setting up the GHCB scratch area for an SEV-ES guest fails. In particular, returning -EINVAL instead of -ENOMEM when allocating the kernel buffer could be confusing as userspace would likely suspect a guest issue. Fixes: 8f423a80 ("KVM: SVM: Support MMIO for an SEV-ES guest") Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
- 02 Dec, 2021 4 commits
-
-
Sean Christopherson authored
Bail from the page fault handler if the root shadow page was obsoleted by a memslot update. Do the check _after_ acuiring mmu_lock, as the TDP MMU doesn't rely on the memslot/MMU generation, and instead relies on the root being explicit marked invalid by kvm_mmu_zap_all_fast(), which takes mmu_lock for write. For the TDP MMU, inserting a SPTE into an obsolete root can leak a SP if kvm_tdp_mmu_zap_invalidated_roots() has already zapped the SP, i.e. has moved past the gfn associated with the SP. For other MMUs, the resulting behavior is far more convoluted, though unlikely to be truly problematic. Installing SPs/SPTEs into the obsolete root isn't directly problematic, as the obsolete root will be unloaded and dropped before the vCPU re-enters the guest. But because the legacy MMU tracks shadow pages by their role, any SP created by the fault can can be reused in the new post-reload root. Again, that _shouldn't_ be problematic as any leaf child SPTEs will be created for the current/valid memslot generation, and kvm_mmu_get_page() will not reuse child SPs from the old generation as they will be flagged as obsolete. But, given that continuing with the fault is pointess (the root will be unloaded), apply the check to all MMUs. Fixes: b7cccd39 ("KVM: x86/mmu: Fast invalidation for TDP MMU") Cc: stable@vger.kernel.org Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Dan Carpenter authored
The error paths in the prepare_vmcs02() function are supposed to set *entry_failure_code but this path does not. It leads to using an uninitialized variable in the caller. Fixes: 71f73470 ("KVM: nVMX: Load GUEST_IA32_PERF_GLOBAL_CTRL MSR on VM-Entry") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <20211130125337.GB24578@kili> Signed-off-by:
-
Paolo Bonzini authored
kvm_vcpu_apicv_active() returns false if a virtual machine has no in-kernel local APIC, however kvm_apicv_activated might still be true if there are no reasons to disable APICv; in fact it is quite likely that there is none because APICv is inhibited by specific configurations of the local APIC and those configurations cannot be programmed. This triggers a WARN: WARN_ON_ONCE(kvm_apicv_activated(vcpu->kvm) != kvm_vcpu_apicv_active(vcpu)); To avoid this, introduce another cause for APICv inhibition, namely the absence of an in-kernel local APIC. This cause is enabled by default, and is dropped by either KVM_CREATE_IRQCHIP or the enabling of KVM_CAP_IRQCHIP_SPLIT. Reported-by:
Ignat Korchagin <ignat@cloudflare.com> Fixes: ee49a893 ("KVM: x86: Move SVM's APICv sanity check to common x86", 2021-10-22) Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by:
-
Like Xu authored
If we run the following perf command in an AMD Milan guest: perf stat \ -e cpu/event=0x1d0/ \ -e cpu/event=0x1c7/ \ -e cpu/umask=0x1f,event=0x18e/ \ -e cpu/umask=0x7,event=0x18e/ \ -e cpu/umask=0x18,event=0x18e/ \ ./workload dmesg will report a #GP warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx. This is because according to APM (Revision: 4.03) Figure 13-7, the bits [35:32] of AMD PerfEvtSeln register is a part of the event select encoding, which extends the EVENT_SELECT field from 8 bits to 12 bits. Opportunistically update pmu->reserved_bits for reserved bit 19. Reported-by:
Jim Mattson <jmattson@google.com> Fixes: ca724305 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211118130320.95997-1-likexu@tencent.com> Signed-off-by:
-
- 30 Nov, 2021 14 commits
-
-
Paolo Bonzini authored
avic_set_running() passes the current CPU to avic_vcpu_load(), albeit via vcpu->cpu rather than smp_processor_id(). If the thread is migrated while avic_set_running runs, the call to avic_vcpu_load() can use a stale value for the processor id. Avoid this by blocking preemption over the entire execution of avic_set_running(). Reported-by:
-
Paolo Bonzini authored
There is nothing to synchronize if APICv is disabled, since neither other vCPUs nor assigned devices can set PIR.ON. Signed-off-by: -
Paolo Bonzini authored
Generally, kvm->lock is not taken for a long time, but sev_lock_two_vms is different: it takes vCPU locks inside, so userspace can hold it back just by calling a vCPU ioctl. Play it safe and use mutex_lock_killable. Message-Id: <20211123005036.2954379-13-pbonzini@redhat.com> Signed-off-by: -
Paolo Bonzini authored
Taking the lock is useless since there are no other references, and there are already accesses (e.g. to sev->enc_context_owner) that do not take it. So get rid of it. Reviewed-by:
-
Paolo Bonzini authored
VMs that mirror an encryption context rely on the owner to keep the ASID allocated. Performing a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM would cause a dangling ASID: 1. copy context from A to B (gets ref to A) 2. move context from A to L (moves ASID from A to L) 3. close L (releases ASID from L, B still references it) The right way to do the handoff instead is to create a fresh mirror VM on the destination first: 1. copy context from A to B (gets ref to A) [later] 2. close B (releases ref to A) 3. move context from A to L (moves ASID from A to L) 4. copy context from L to M So, catch the situation by adding a count of how many VMs are mirroring this one's encryption context. Fixes: 0b020f5a ("KVM: SEV: Add support for SEV-ES intra host migration") Message-Id: <20211123005036.2954379-11-pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
Now that we have a facility to lock two VMs with deadlock protection, use it for the creation of mirror VMs as well. One of COPY_ENC_CONTEXT_FROM(dst, src) and COPY_ENC_CONTEXT_FROM(src, dst) would always fail, so the combination is nonsensical and it is okay to return -EBUSY if it is attempted. This sidesteps the question of what happens if a VM is MOVE_ENC_CONTEXT_FROM'd at the same time as it is COPY_ENC_CONTEXT_FROM'd: the locking prevents that from happening. Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Reviewed-by:
-
Paolo Bonzini authored
I am putting the tests in sev_migrate_tests because the failure conditions are very similar and some of the setup code can be reused, too. The tests cover both successful creation of a mirror VM, and error conditions. Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Message-Id: <20211123005036.2954379-9-pbonzini@redhat.com> Signed-off-by: -
Paolo Bonzini authored
Allow intra-host migration of a mirror VM; the destination VM will be a mirror of the same ASID as the source. Fixes: b5663931 ("KVM: SEV: Add support for SEV intra host migration") Reviewed-by:
-
Paolo Bonzini authored
This was broken before the introduction of KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM, but technically harmless because the region list was unused for a mirror VM. However, it is untidy and it now causes a NULL pointer access when attempting to move the encryption context of a mirror VM. Fixes: 54526d1f ("KVM: x86: Support KVM VMs sharing SEV context") Message-Id: <20211123005036.2954379-7-pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
Encapsulate the handling of the migration_in_progress flag for both VMs in two functions sev_lock_two_vms and sev_unlock_two_vms. It does not matter if KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM locks the destination struct kvm a bit later, and this change 1) keeps the cleanup chain of labels smaller 2) makes it possible for KVM_CAP_VM_COPY_ENC_CONTEXT_FROM to reuse the logic. Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Message-Id: <20211123005036.2954379-6-pbonzini@redhat.com> Signed-off-by: -
Paolo Bonzini authored
list_replace_init cannot be used if the source is an empty list, because "new->next->prev = new" will overwrite "old->next": new old prev = new, next = new prev = old, next = old new->next = old->next prev = new, next = old prev = old, next = old new->next->prev = new prev = new, next = old prev = old, next = new new->prev = old->prev prev = old, next = old prev = old, next = old new->next->prev = new prev = old, next = old prev = new, next = new The desired outcome instead would be to leave both old and new the same as they were (two empty circular lists). Use list_cut_before, which already has the necessary check and is documented to discard the previous contents of the list that will hold the result. Fixes: b5663931 ("KVM: SEV: Add support for SEV intra host migration") Reviewed-by:
-
Paolo Bonzini authored
Currently, checks for whether VT-d PI can be used refer to the current status of the feature in the current vCPU; or they more or less pick vCPU 0 in case a specific vCPU is not available. However, these checks do not attempt to synchronize with changes to the IRTE. In particular, there is no path that updates the IRTE when APICv is re-activated on vCPU 0; and there is no path to wakeup a CPU that has APICv disabled, if the wakeup occurs because of an IRTE that points to a posted interrupt. To fix this, always go through the VT-d PI path as long as there are assigned devices and APICv is available on both the host and the VM side. Since the relevant condition was copied over three times, take the hint and factor it into a separate function. Suggested-by:
David Matlack <dmatlack@google.com> Message-Id: <20211123004311.2954158-5-pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
The IRTE for an assigned device can trigger a POSTED_INTR_VECTOR even if APICv is disabled on the vCPU that receives it. In that case, the interrupt will just cause a vmexit and leave the ON bit set together with the PIR bit corresponding to the interrupt. Right now, the interrupt would not be delivered until APICv is re-enabled. However, fixing this is just a matter of always doing the PIR->IRR synchronization, even if the vCPU has temporarily disabled APICv. This is not a problem for performance, or if anything it is an improvement. First, in the common case where vcpu->arch.apicv_active is true, one fewer check has to be performed. Second, static_call_cond will elide the function call if APICv is not present or disabled. Finally, in the case for AMD hardware we can remove the sync_pir_to_irr callback: it is only needed for apic_has_interrupt_for_ppr, and that function already has a fallback for !APICv. Cc: stable@vger.kernel.org Co-developed-by:
-
Paolo Bonzini authored
If APICv is disabled for this vCPU, assigned devices may still attempt to post interrupts. In that case, we need to cancel the vmentry and deliver the interrupt with KVM_REQ_EVENT. Extend the existing code that handles injection of L1 interrupts into L2 to cover this case as well. vmx_hwapic_irr_update is only called when APICv is active so it would be confusing to add a check for vcpu->arch.apicv_active in there. Instead, just use vmx_set_rvi directly in vmx_sync_pir_to_irr. Cc: stable@vger.kernel.org Reviewed-by:
-
