- 13 Jul, 2016 25 commits
-
-
Andi Shyti authored
There are two if ... else which check the same thing in different part of the code, they can be merged in a single check. Signed-off-by:
Andi Shyti <andi.shyti@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Andi Shyti authored
The whole function is inside an 'if' statement ("if (ir->d.add_to_buf)"). Check the opposite of that statement at the beginning and exit, this way we can have one level less of indentation. Signed-off-by: -
Andi Shyti authored
... use "do .. while" instead. Signed-off-by:
-
Andi Shyti authored
The code can be rearranged so that some goto paths can be removed Signed-off-by:
-
Andi Shyti authored
This patch mutes also all the checkpatch warnings related to printk. Reword all the printouts so that the string doesn't need to be split, which fixes the following checkpatch warning: WARNING: quoted string split across lines Signed-off-by:
-
Andi Shyti authored
Signed-off-by:
-
Andi Shyti authored
Transmitters don't necessarily need to have a FIFO managed buffer for their transfers. When registering the driver, before allocating the buffer, check whether the device is a transmitter or receiver. Allocate the buffer only for receivers. Signed-off-by:
-
Andi Shyti authored
During the driver registration, move the buffer allocation on a separate function. Signed-off-by:
-
Arnd Bergmann authored
The newly added FCP support in the vsp1 driver causes a link error when CONFIG_RENESAS_FCP=m, since it's not reachable by built-in code: drivers/media/built-in.o: In function `vsp1_remove': :(.text+0xdeca0): undefined reference to `rcar_fcp_put' drivers/media/built-in.o: In function `vsp1_probe': :(.text+0xdef44): undefined reference to `rcar_fcp_get' We already have a conditional dependency on FCP that requires it for ARM64, so for all others we just have to prevent setting RENESAS_VSP1=y when RENESAS_FCP=m by extending the FCP dependency. Fixes: 94fcdf82 ("[media] v4l: vsp1: Add FCP support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
Building without CONFIG_PM results in a harmless warning from slightly incorrect #ifdef guards: drivers/media/platform/vsp1/vsp1_drv.c:525:12: error: 'vsp1_pm_runtime_resume' defined but not used [-Werror=unused-function] drivers/media/platform/vsp1/vsp1_drv.c:516:12: error: 'vsp1_pm_runtime_suspend' defined but not used [-Werror=unused-function] This removes the existing #ifdef and instead marks all four PM functions as __maybe_unused. Fixes: 1e6af546 ("[media] v4l: vsp1: Implement runtime PM support") Signed-off-by:
-
Mauro Carvalho Chehab authored
* topic/vsp1: (36 commits) [media] v4l: vsp1: wpf: Add flipping support [media] v4l: vsp1: rwpf: Support runtime modification of controls [media] v4l: vsp1: Simplify alpha propagation [media] v4l: vsp1: clu: Support runtime modification of controls [media] v4l: vsp1: lut: Support runtime modification of controls [media] v4l: vsp1: Support runtime modification of controls [media] v4l: vsp1: Add Cubic Look Up Table (CLU) support [media] v4l: vsp1: lut: Expose configuration through a control [media] v4l: vsp1: lut: Initialize the mutex [media] v4l: vsp1: dl: Don't free fragments with interrupts disabled [media] v4l: vsp1: Set entities functions [media] v4l: vsp1: Don't create LIF entity when the userspace API is enabled [media] v4l: vsp1: Don't register media device when userspace API is disabled [media] v4l: vsp1: Base link creation on availability of entities [media] media: Add video statistics computation functions [media] media: Add video processing entity functions [media] v4l: vsp1: sru: Fix intensity control ID [media] v4l: vsp1: Stop the pipeline upon the first STREAMOFF [media] v4l: vsp1: Constify operation structures [media] v4l: vsp1: pipe: Fix typo in comment ...
-
Ezequiel Garcia authored
Now that the frame rate can be properly set, this commit adds support for S_PARM and G_PARM. Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of using two tables to estimate the temporal decimation factor, use a formula. This allows to get the closest fps, which sounds better than the current tables. Also, the current code doesn't store the real framerate. This patch fixes the above issues. [Ezequiel: - introduce a TW686X_MAX_FPS macro for max_fps. - use hweight_long instead of open coding the set bits count.] Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Dan Carpenter authored
My static checker complains that if adap->props.num_frontends is 0 then "ret" is uninitialized. I don't think that can happen. But "ret" is always zero here so we can just remove the condition. This extra check was added in commit 0d3ab841 ('[media] dvb core: must check dvb_create_media_graph()'). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in dev_err message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Olli Salonen authored
Add the USB ID for Terratec Cinergy S2 Rev.3 (0ccd:0102). Curiously dvb-usb-ids included already the USB ID for TERRATEC_CINERGY_S2_R3 even if the device was not supported. Reported-by:
Christian Knippel <namerp@googlemail.com> Signed-off-by:
Olli Salonen <olli.salonen@iki.fi> Signed-off-by:
-
Saso Slavicic authored
Tuning a card with Sony ASCOT2E produces the following error: kernel: i2c i2c-9: wr reg=0006: len=11 is too big! MAX_WRITE_REGSIZE is defined as 10, buf[MAX_WRITE_REGSIZE + 1] buffer is used in ascot2e_write_regs(). The problem is that exactly 10 bytes are written in ascot2e_set_params(): /* Set BW_OFFSET (0x0F) value from parameter table */ data[9] = ascot2e_sett[tv_system].bw_offset; ascot2e_write_regs(priv, 0x06, data, 10); The test in write_regs is as follows: if (len + 1 >= sizeof(buf)) 10 + 1 = 11 and that would be exactly the size of buf. Since 10 bytes + buf[0] = reg would seem to fit into buf[], this shouldn't be an error. Signed-off-by: -
Wei Yongjun authored
Fixes the following sparse warning: drivers/staging/media/pulse8-cec/pulse8-cec.c:427:27: warning: symbol 'pulse8_cec_adap_ops' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by:
Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Wei Yongjun authored
In case of error, the function devm_clk_get() returns ERR_PTR() and not returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by:
-
Wei Yongjun authored
In case of error, the function devm_clk_get() returns ERR_PTR() and not returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
-
Hans Verkuil authored
When transmitting a message and waiting for a reply it would be good to know the time between when the message was transmitted and when the reply arrived. With only one timestamp field it was set to when the reply arrived and the original transmit time was overwritten. Just taking the timestamp in userspace right before CEC_TRANSMIT is called is not reliable, since the actual transmit can be delayed if the CEC bus is busy. Only the driver can fill this in accurately. So split up the ts field into an rx_ts and a tx_ts. Also move the status fields to after the 'reply' field: they were placed in a strange position and make much more sense when grouped with the other status-related fields. This patch also makes sure that the timestamp is taken as soon as possible. Signed-off-by:
-
Hans Verkuil authored
Check (and warn) if the msg->len is too long or if it is 0. Should never happen, but just in case... Signed-off-by:
-
Jonathan McDowell authored
The DW2102 DVB-S/S2 driver uses the info() logging function from dvb-usb.h. This function already appends a newline to the provided log message, causing the dmesg output from DW2102 to include blank lines. Fix this by removing the newline in the calls to info(). Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
-
- 12 Jul, 2016 15 commits
-
-
Sudip Mukherjee authored
We have assigned memory while requesting the firmware but if the sanity check fails then we are not releasing the firmware. Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
-
Andrew Morton authored
drivers/staging/media/cec/cec-adap.c: In function 'cec_queue_msg_fh': drivers/staging/media/cec/cec-adap.c:141: error: unknown field 'lost_msgs' specified in initializer Fixes: 9881fe0c ("[media] cec: add HDMI CEC framework (adapter)") Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Kamil Debski <kamil@wypas.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/staging/media/pulse8-cec/pulse8-cec.c:104:6: warning: no previous prototype for 'pulse8_irq_work_handler' [-Wmissing-prototypes] void pulse8_irq_work_handler(struct work_struct *work) ^~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Hans Verkuil authored
Explain what needs to be done to move this driver out of staging. Signed-off-by:
-
Hans Verkuil authored
Add entry for the pulse8-cec driver. Signed-off-by:
-
Hans Verkuil authored
This supports the Pulse-Eight USB-CEC Adapter. It has been tested with firmware versions 4 and 5, but it should hopefully work fine with older firmwares as well. Signed-off-by:
-
Hans Verkuil authored
This is for the new pulse8-cec staging driver. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hans Verkuil authored
When the device is in monitor mode, then you should always be able to call CEC_RECEIVE, even it the device is unconfigured. Signed-off-by:
-
Stephen Backway authored
Add support fo the Hauppauge WinTV quadHD DVB version. IR support has not been provided, all 4 tuners, demodulators etc are working. Further documentation can be found on Linux TV wiki. Signed-off-by:
Stephen Backway <stev391@gmail.com> Signed-off-by:
-
Hans Verkuil authored
CEC USB dongles can be unplugged at any time, and at that point they will be unregistered. Make sure that any attempt afterwards to set the physical or logical addresses will be ignored. Signed-off-by:
-
Hans Verkuil authored
Correctly set the h/vsync polarities instead of keeping to the default (positive). Signed-off-by:
-
Hans Verkuil authored
This field should be zeroed. Both for s_dv_timings and for enum_dv_timings. In fact, for the latter anything after the pad field can be zeroed. Signed-off-by:
-
Hans Verkuil authored
These platform_data fields are no longer needed, drop them. Signed-off-by:
-
Hans Verkuil authored
The adv7604/adv7842 drivers now handle that register setting themselves and need no input from platform data anymore. This was a left-over from the time that the pixelport output format was decided by the platform data. Signed-off-by:
-
Hans Verkuil authored
Fix a number of bugs that appeared when support for mediabus formats was added: - Support for V4L2_DV_RGB_RANGE_FULL/LIMITED should only be enabled for HDMI RGB formats, not for YCbCr formats. Since, as the name says, this setting is for RGB only. So read the InfoFrame to check the format. - the quantization range for the pixelport depends on whether the mediabus code is RGB or not: if it is RGB, then produce full range RGB values, otherwise produce limited range YCbCr values. This means that the op_656_range and alt_data_sat fields of the platform data are no longer used and these will be removed in a following patch. - when setting up a new format the RGB quantization range settings were never updated. Do so, since this depends on the format. - fix the log_status output which was confusing and incorrect. Signed-off-by:
-
