Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This reverts commit 5037d4dd.

Explanation why this does not work:
This change connects the simswap to the LED subsystem of the kernel.
From my point of view, it's nonsense. If we do it this way, then this
can be switched relatively easily via the LED subsystem (trigger:
none/default-on) and that is dangerous! If this is used, it would be
unfavorable, since there is also another trigger (trigger:
heartbeat/netdev).

Therefore, this simswap GPIO should remain in the GPIO
subsystem and be switched via it and not be connected to the LED
subsystem. To avoid the problems mentioned above. The LED subsystem is
not made for this and it is not a good compromise, but rather dangerous.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Extend FAN platform data with register presence field.
Add register present entry per rotor (tachometer) description tuple.
The purpose is to allow indication of FAN presence.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add new field 'reg_prsnt' to the structure 'mlxreg_core_data' to
provide the number FAN drawers equpped within the system. The purpose
is to allow mapping between FAN drawers and FAN rotors (tachometer),
since FAN drawer can be eqipped with a few rotors.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add documentation for the new attributes for exposing CPLDs part
numbers and CPLD minor versions.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add support for attributes composed from few registers.
Such attributes could occupy from 2 to 4 sequential registers.
For word size register space complex attributes can occupy up to two
registers, for byte size - up to four. These attributes can carry, for
example, CPLD or FPGA versioning, power consuming info, etcetera.
Such registers contain read-only data.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add new attributes for the all type systems specifying for each
equipped CPLD device, the CPLD part number and the CPLD minor version
of the device: 'cpld{n}_pn' and 'cpld{n}_version_min'.
This information is to be used for mathcing the current CPLD image and
for making decision if image upgrade is required for CPLD device.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add new field 'regnum' to the structure 'mlxreg_core_data' to specify
the number of registers occupied by multi-register attribute.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Send "udev" event with environmental data in order to allow handling
"ENV{}" variables in "udev" rules.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Create the 'sysfs' attributes according to configuration provided
through the capability register, which purpose is to indicate the
actual number of the components within the particular group.
Such components could be, for example the FAN or power supply units.
The motivation is to avoid adding a new code in the future in order to
distinct between the systems types supporting a different number of the
components like power supplies, FANs, ASICs, line cards.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Change module license to 'SPDX'.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add few of simple tests for string_upper() and string_lower() helpers.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Provide the helpers for string conversions to upper and lower cases.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When _BCL invalid, disable thinkpad_acpi backlight brightness control.

brightness_enable is already checked at the beginning.
Most new thinkpads are using GPU driver to control brightness now,
print notice when enabled brightness control even when brightness_enable = 1.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Newer Lenovo Thinkpad platforms have support to identify whether the
system is on-lap or not using an ACPI DYTC event from the firmware.

This patch provides the ability to retrieve the current mode via sysfs
entrypoints and will be used by userspace for thermal mode and WWAN
functionality
Co-developed-by: Nitin Joshi <njoshi1@lenovo.com>
Signed-off-by: Nitin Joshi <njoshi1@lenovo.com>
Reviewed-by: Sugumaran <slacshiminar@lenovo.com>
Reviewed-by: Bastien Nocera <bnocera@redhat.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This reverts commit 35d13c7a.

This broke procfs interface due to neglecting the fact that
the strings are not coming NULL terminated.

Revert the change till we will have a better clean up.

Fixes: 35d13c7a ("platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add device support for the new ASUS ROG Zephyrus G14 (GA401I) and
G15 (GA502I) series.

This is accomplished by two new quirk entries (one per each series),
as well as all current available G401I/G502I DMI_PRODUCT_NAMEs to match
the corresponding devices.
Signed-off-by: Armas Spann <zappel@retarded.farm>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.

Fixes: 332e0812 ("intel-vbtn: new driver for Intel Virtual Button")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.

Fixes: ecc83e52 ("intel-hid: new hid event driver for hotkeys")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Check bounds before accessing map[] array.
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

PMC debug tools use lpm0's 23rd bit to reflect Main PLL, not just
Audio PLL. So, update tgl_lpm0 debug reg bit map name.
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Arava Jairaj <jairaj.arava@intel.com>
Acked-by: David E. Box <david.e.box@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The battery on my laptop ASUS TUF Gaming FX706II is named BAT1.
This patch allows battery extension to load.
Signed-off-by: Vasiliy Kupriakov <rublag-ns@yandex.ru>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This keycode is used by Dell as a no-op for keys that should have
no function.

This keycode is never triggered by a keypress in practice, rather
it is included from the 0xB2 DMI table at startup.

This prevents the following messages from being logged at startup on a
Dell Inspiron 5593:

    dell_wmi: firmware scancode 0x48 maps to unrecognized keycode 0xffff
    dell_wmi: firmware scancode 0x50 maps to unrecognized keycode 0xffff

as per this code comment:

   Log if we find an entry in the DMI table that we don't
   understand.  If this happens, we should figure out what
   the entry means and add it to bios_to_linux_keycode.
Signed-off-by: Y Paritcher <y.linux@paritcher.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>

These are events with extended data. The extended data is
currently ignored as userspace does not have a way to deal
it.

Ignore event with a type of 0x0012 and a code of 0xe035, as
the keyboard controller takes care of Fn lock events by itself.
This silences the following messages being logged when
pressing the Fn-lock key on a Dell Inspiron 5593:

dell_wmi: Unknown WMI event type 0x12
dell_wmi: Unknown key with type 0x0012 and code 0xe035 pressed

This is consistent with the behavior for the Fn-lock key
elsewhere in this file.
Signed-off-by: Y Paritcher <y.linux@paritcher.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>

Add events with a type of 0x0010 and a code of 0x57 / 0x58,
this silences the following messages being logged on a
Dell Inspiron 5593:

dell_wmi: Unknown key with type 0x0010 and code 0x0057 pressed
dell_wmi: Unknown key with type 0x0010 and code 0x0058 pressed

These are brightness events and will be handled by acpi-video
Signed-off-by: Y Paritcher <y.linux@paritcher.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Many Bay Trail and Cherry Trail devices come with a camera attached to
Intel's Image Signal Processor. Linux currently does not have a driver for
these, so they do not work as a camera.

Some of these camera's have a status LED which is controlled through a GPIO
in some cases, e.g. on the Asus T100TA and Asus T200TA, there is a firmware
issue where the LED gets turned on at boot.

This commit adds a Linux LED driver for the camera LED on these devices.
This driver will turn the LED off at boot and also allows controlling the
LED (so the user can repurpose it) through the sysfs LED interface.

Which GPIO is attached to the LED is usually not described in the ACPI
tables, so this driver contains per-system info about the GPIO inside the
driver. This means that this driver only works on systems the driver knows
about.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Added new PCI device ids for supporting mailbox and MMIO interface for
Sapphire Rapids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

system76_set() was set as an LED ->brightness_set() callback, but it calls
acpi_evaluate_object() which is not atomic-safe. Switch to the
->brightness_set_blocking() LED callback instead.
Signed-off-by: Nick Shipp <git@segbrk.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

acpi_dev_get_resources() does perform the NULL pointer check against
ACPI companion device which is given as function parameter. Thus,
there is no need to duplicate this check in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull SafeSetID update from Micah Morton:
 "Add additional LSM hooks for SafeSetID

  SafeSetID is capable of making allow/deny decisions for set*uid calls
  on a system, and we want to add similar functionality for set*gid
  calls.

  The work to do that is not yet complete, so probably won't make it in
  for v5.8, but we are looking to get this simple patch in for v5.8
  since we have it ready.

  We are planning on the rest of the work for extending the SafeSetID
  LSM being merged during the v5.9 merge window"

* tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
  security: Add LSM hooks to set*gid syscalls

The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>

Pull btrfs updates from David Sterba:
 "This reverts the direct io port to iomap infrastructure of btrfs
  merged in the first pull request. We found problems in invalidate page
  that don't seem to be fixable as regressions or without changing iomap
  code that would not affect other filesystems.

  There are four reverts in total, but three of them are followup
  cleanups needed to revert a43a67a2 cleanly. The result is the
  buffer head based implementation of direct io.

  Reverts are not great, but under current circumstances I don't see
  better options"

* tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Revert "btrfs: switch to iomap_dio_rw() for dio"
  Revert "fs: remove dio_end_io()"
  Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
  Revert "btrfs: split btrfs_direct_IO to read and write part"

Pull networking fixes from David Miller:

 1) Fix cfg80211 deadlock, from Johannes Berg.

 2) RXRPC fails to send norigications, from David Howells.

 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
    Geliang Tang.

 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.

 5) The ucc_geth driver needs __netdev_watchdog_up exported, from
    Valentin Longchamp.

 6) Fix hashtable memory leak in dccp, from Wang Hai.

 7) Fix how nexthops are marked as FDB nexthops, from David Ahern.

 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.

 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.

10) Fix link speed reporting in iavf driver, from Brett Creeley.

11) When a channel is used for XSK and then reused again later for XSK,
    we forget to clear out the relevant data structures in mlx5 which
    causes all kinds of problems. Fix from Maxim Mikityanskiy.

12) Fix memory leak in genetlink, from Cong Wang.

13) Disallow sockmap attachments to UDP sockets, it simply won't work.
    From Lorenz Bauer.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
  net: ethernet: ti: ale: fix allmulti for nu type ale
  net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
  net: atm: Remove the error message according to the atomic context
  bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
  libbpf: Support pre-initializing .bss global variables
  tools/bpftool: Fix skeleton codegen
  bpf: Fix memlock accounting for sock_hash
  bpf: sockmap: Don't attach programs to UDP sockets
  bpf: tcp: Recv() should return 0 when the peer socket is closed
  ibmvnic: Flush existing work items before device removal
  genetlink: clean up family attributes allocations
  net: ipa: header pad field only valid for AP->modem endpoint
  net: ipa: program upper nibbles of sequencer type
  net: ipa: fix modem LAN RX endpoint id
  net: ipa: program metadata mask differently
  ionic: add pcie_print_link_status
  rxrpc: Fix race between incoming ACK parser and retransmitter
  net/mlx5: E-Switch, Fix some error pointer dereferences
  net/mlx5: Don't fail driver on failure to create debugfs
  net/mlx5e: CT: Fix ipv6 nat header rewrite actions
  ...

This reverts commit a43a67a2.

This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.

The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.

Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.

There have been discussions how to fix that, but revert seems to be the
least intrusive option.

Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by: David Sterba <dsterba@suse.com>

On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.

This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").

Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().

Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.

Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2020-06-12

The following pull-request contains BPF updates for your *net* tree.

We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).

The main changes are:

1) sock_hash accounting fix, from Andrey.

2) libbpf fix and probe_mem sanitizing, from Andrii.

3) sock_hash fixes, from Jakub.

4) devmap_val fix, from Jesper.

5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Looking into the context (atomic!) and the error message should be dropped.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>