- 24 Jun, 2016 5 commits
-
-
Naveen N. Rao authored
Break out classic BPF JIT specifics into a separate header in preparation for eBPF JIT implementation. Note that ppc32 will still need the classic BPF JIT. Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Naveen N. Rao authored
1. Per the ISA, ADDIS actually uses RT, rather than RS. Though the result is the same, make the usage clear. 2. The multiply instruction used is a 32-bit multiply. Rename PPC_MUL() to PPC_MULW() to make the same clear. 3. PPC_STW[U] take the entire 16-bit immediate value and do not require word-alignment, per the ISA. Change the macros to use IMM_L(). 4. A few white-space cleanups to satisfy checkpatch.pl. Acked-by:
-
Naveen N. Rao authored
Since we will be using the rotate immediate instructions for extended BPF JIT, let's introduce macros for the same. And since the shift immediate operations use the rotate immediate instructions, let's redo those macros to use the newly introduced instructions. Acked-by:
-
Naveen N. Rao authored
Similar to the LI32() optimization, if the value can be represented in 32-bits, use LI32(). Also handle loading a few specific forms of immediate values in an optimum manner. Acked-by:
-
Naveen N. Rao authored
The existing LI32() macro can sometimes result in a sign-extended 32-bit load that does not clear the top 32-bits properly. As an example, loading 0x7fffffff results in the register containing 0xffffffff7fffffff. While this does not impact classic BPF JIT implementation (since that only uses the lower word for all operations), we would like to share this macro between classic BPF JIT and extended BPF JIT, wherein the entire 64-bit value in the register matters. Fix this by first doing a shifted LI followed by ORI. An additional optimization is with loading values between -32768 to -1, where we now only need a single LI. The new implementation now generates the same or less number of instructions. Acked-by:
-
- 23 Jun, 2016 1 commit
-
-
Shreyas B. Prabhu authored
pnv_init_idle_states() discovers supported idle states from the device tree and does the required initialization. Set power_save function pointer only after this initialization is done Otherwise on machines which don't support nap, eg. Power9, the kernel will crash when it tries to nap. Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
- 21 Jun, 2016 25 commits
-
-
Gavin Shan authored
We're initializing "IODA1" and "IODA2" PHBs though they are IODA2 and NPU PHBs as below kernel log indicates. Initializing IODA1 OPAL PHB /pciex@3fffe40700000 Initializing IODA2 OPAL PHB /pciex@3fff000400000 This fixes the PHB names. After it's applied, we get: Initializing IODA2 PHB (/pciex@3fffe40700000) Initializing NPU PHB (/pciex@3fff000400000) Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
Gavin Shan authored
This adds standalone driver to support PCI hotplug for PowerPC PowerNV platform that runs on top of skiboot firmware. The firmware identifies hotpluggable slots and marked their device tree node with proper "ibm,slot-pluggable" and "ibm,reset-by-firmware". The driver scans device tree nodes to create/register PCI hotplug slot accordingly. The PCI slots are organized in fashion of tree, which means one PCI slot might have parent PCI slot and parent PCI slot possibly contains multiple child PCI slots. At the plugging time, the parent PCI slot is populated before its children. The child PCI slots are removed before their parent PCI slot can be removed from the system. If the skiboot firmware doesn't support slot status retrieval, the PCI slot device node shouldn't have property "ibm,reset-by-firmware". In that case, none of valid PCI slots will be detected from device tree. The skiboot firmware doesn't export the capability to access attention LEDs yet and it's something for TBD. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Gavin Shan authored
This exports 4 functions, which base on the corresponding OPAL APIs to get/set PCI slot status. Those functions are going to be used by PowerNV PCI hotplug driver: pnv_pci_get_device_tree() opal_get_device_tree() pnv_pci_get_presence_state() opal_pci_get_presence_state() pnv_pci_get_power_state() opal_pci_get_power_state() pnv_pci_set_power_state() opal_pci_set_power_state() Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Gavin Shan authored
This introduces pnv_pci_get_slot_id() to get the hotpluggable PCI slot ID from the corresponding device node. It will be used by hotplug driver. Requested-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Gavin Shan authored
The (OPAL) firmware might provide the PCI slot reset capability which is identified by property "ibm,reset-by-firmware" on the PCI slot associated device node. This routes the reset request to firmware if "ibm,reset-by-firmware" exists in the PCI slot device node. Otherwise, the reset is done inside kernel as before. Signed-off-by:
-
Gavin Shan authored
The reset and poll functionality from (OPAL) firmware supports PHB and PCI slot at same time. They are identified by ID. This supports PCI slot ID by: * Rename the argument name for opal_pci_reset() and opal_pci_poll() accordingly * Rename pnv_eeh_phb_poll() to pnv_eeh_poll() and adjust its argument name. * One macro is added to produce PCI slot ID. Signed-off-by: -
Gavin Shan authored
The pdn (struct pci_dn) instances are allocated from memblock or bootmem when creating PCI controller (hoses) in setup_arch(). PCI hotplug, which will be supported by proceeding patches, releases PCI device nodes and their corresponding pdn on unplugging event. The memory chunks for pdn instances allocated from memblock or bootmem are hard to reused after being released. This delays creating pdn by pci_devs_phb_init() from setup_arch() to core_initcall() so that they are allocated from slab. The memory consumed by pdn can be released to system without problem during PCI unplugging time. It indicates that pci_dn is unavailable in setup_arch() and the the fixup on pdn (like AGP's) can't be carried out that time. We have to do that in pcibios_root_bridge_prepare() on maple/pasemi/powermac platforms where/when the pdn is available. pcibios_root_bridge_prepare is called from subsys_initcall() which is executed after core_initcall() so the code flow does not change. At the mean while, the EEH device is created when pdn is populated, meaning pdn and EEH device have same life cycle. In turn, we needn't call eeh_dev_init() to create EEH device explicitly. Signed-off-by:
-
Gavin Shan authored
On the PCI plugging event, PCI slot's subordinate devices are scanned and their (IO and MMIO) resources are assigned. Platform dependent resources (PE#, IO/MMIO/DMA windows) are allocated or created on updating windows of the slot's upstream bridge. This updates the windows of the hot plugged slot's upstream bridge in pcibios_finish_adding_to_bus() so that the platform resources (PE#, IO/MMIO/DMA segments) are allocated or created accordingly. Signed-off-by:
-
Gavin Shan authored
This supports releasing PEs dynamically. A reference count is introduced to PE representing number of PCI devices associated with the PE. The reference count is increased when PCI device joins the PE and decreased when PCI device leaves the PE in pnv_pci_release_device(). When the count becomes zero, the PE and its consumed resources are released. Note that the count is accessed concurrently. So a counter with "int" type is enough here. In order to release the sources consumed by the PE, couple of helper functions are introduced as below: * pnv_pci_ioda1_unset_window() - Unset IODA1 DMA32 window * pnv_pci_ioda1_release_dma_pe() - Release IODA1 DMA32 segments * pnv_pci_ioda2_release_dma_pe() - Release IODA2 DMA resource * pnv_ioda_release_pe_seg() - Unmap IO/M32/M64 segments Signed-off-by:
-
Gavin Shan authored
pnv_ioda_deconfigure_pe() is visible only when CONFIG_PCI_IOV is enabled. The function will be used to tear down PE's associated mapping in PCI hotplug path that doesn't depend on CONFIG_PCI_IOV. This makes pnv_ioda_deconfigure_pe() visible and not depend on CONFIG_PCI_IOV. Signed-off-by:
-
Gavin Shan authored
The PCI slots are associated with root port or downstream ports of the PCIe switch connected to root port. When adapter is hot added to the PCI slot, it usually requests more IO or memory resource from the directly connected parent bridge (port) and update the bridge's windows accordingly. The resource windows of upstream bridges can't be updated automatically. It possibly leads to unbalanced resource across the bridges: The window of downstream bridge is overruning that of upstream bridge. The IO or MMIO path won't work. This resolves the above issue by extending bridge windows of root port and upstream port of the PCIe switch connected to the root port to PHB's windows. The windows of root port and bridge behind that are extended to the PHB's windows to accomodate the PCI hotplug happening in future. The PHB's 64KB 32-bits MSI region is included in bridge's M32 windows (in hardware) though it's excluded in the corresponding resource, as the bridge's M32 windows have 1MB as their minimal alignment. We observed EEH error during system boot when the MSI region is included in bridge's M32 window. This excludes top 1MB (including 64KB 32-bits MSI region) region from bridge's M32 windows when extending them. Signed-off-by:
-
Gavin Shan authored
There is no parent bridge for root bus, meaning pcibios_setup_bridge() isn't invoked for root bus. The PE for root bus is the ancestor of other PEs in PELTV. It means we need PE for root bus populated before all others. This populates the PE for root bus in pcibios_setup_bridge() path if it's not populated yet. The PE number next to the reserved one is used as the PE# to avoid holes in continuous M64 space. Signed-off-by:
-
Gavin Shan authored
Currently, the PEs and their associated resources are assigned in ppc_md.pcibios_fixup() except those used by SRIOV VFs. The function is called for once after PCI probing and resources assignment is completed. So it's obviously not hotplug friendly. This creates PEs dynamically in pcibios_setup_bridge() that is called for the event during system bootup and PCI hotplug: updating PCI bridge's windows after resource assignment/reassignment are done. In partial hotplug case, not all PCI devices included to one particular PE are unplugged and plugged again, we just need unbinding/binding the hot added PCI devices with the corresponding PE without creating new one. The change is applied to IODA1 and IODA2 PHBs only. The behaviour on NPU PHBs aren't changed. There are no PCI bridges on NPU PHBs, meaning pcibios_setup_bridge() won't be invoked there. We have to use old path (pnv_pci_ioda_fixup()) to setup PEs on NPU PHBs. Signed-off-by:
-
Gavin Shan authored
PE number for one particular PE can be allocated dynamically or reserved according to the consumed M64 (64-bits prefetchable) segments of the PE. The M64 segment can't be remapped to arbitrary PE, meaning the PE number is determined according to the index of the consumed M64 segment. As below figure shows, M64 resource grows from low to high end, meaning the PE (number) reserved according to M64 segment grows from low to high end as well, so does the dynamically allocated PE number. It will lead to conflict: PE number (M64 segment) reserved by dynamic allocation is required by hot added PCI adapter at later point. It fails the PCI hotplug because of the PE number can't be reserved based on the index of the consumed M64 segment. +---+---+---+---+---+--------------------------------+-----+ | 0 | 1 | 2 | 3 | 4 | ....... | 255 | +---+---+---+---+---+--------------------------------+-----+ PE number for dynamic allocation -----------------> PE number reserved for M64 segment -----------------> To resolve above conflicts, this forces the PE number to be allocated dynamically in reverse order. With this patch applied, the PE numbers are reserved in ascending order, but allocated dynamically in reverse order. Signed-off-by:
-
Gavin Shan authored
Each PHB maintains an array helping to translate 2-bytes Request ID (RID) to PE# with the assumption that PE# takes one byte, meaning that we can't have more than 256 PEs. However, pci_dn->pe_number already had 4-bytes for the PE#. This extends the PE# capacity for every PHB. After that, the PE number is represented by 4-bytes value. Then we can reuse IODA_INVALID_PE to check the PE# in phb->pe_rmap[] is valid or not. Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Gavin Shan authored
pnv_pci_ioda_setup_opal_tce_kill() called by pnv_ioda_setup_dma() to remap the TCE kill regiter. What's done in pnv_ioda_setup_dma() will be covered in pcibios_setup_bridge() which is invoked on each PCI bridge. It means we will possibly remap the TCE kill register for multiple times and it's unnecessary. This moves pnv_pci_ioda_setup_opal_tce_kill() to where the PHB is initialized (pnv_pci_init_ioda_phb()) to avoid above issue. Signed-off-by:
-
Gavin Shan authored
The macro defined in arch/powerpc/platforms/powernv/pci.c isn't used by anyone. Just remove it. Signed-off-by:
-
Gavin Shan authored
This overrides pcibios_setup_bridge() that is called to update PCI bridge windows when PCI resource assignment is completed, to assign PE and setup various (resource) mapping for the PE in subsequent patches. Signed-off-by:
-
Gavin Shan authored
Currently, PowerPC PowerNV platform utilizes ppc_md.pcibios_fixup(), which is called for once after PCI probing and resource assignment are completed, to allocate platform required resources for PCI devices: PE#, IO and MMIO mapping, DMA address translation (TCE) table etc. Obviously, it's not hotplug friendly. This adds weak function pcibios_setup_bridge(), which is called by pci_setup_bridge(). PowerPC PowerNV platform will reuse the function to assign above platform required resources to newly plugged PCI devices during PCI hotplug in subsequent patches. Signed-off-by:
-
Mauricio Faria de Oliveira authored
Export cpu_to_core_id(). This will be used by the lpfc driver. This enables topology_core_id() from <linux/topology.h> (defined to cpu_to_core_id() in arch/powerpc/include/asm/topology.h) to be used by (non-builtin) modules. That is arch-neutral, already used by eg, drivers/base/topology.c, but it is builtin (obj-y in Makefile) thus didn't need the export. Since the module uses topology_core_id() and this is defined to cpu_to_core_id(), it needs the export, otherwise: ERROR: "cpu_to_core_id" [drivers/scsi/lpfc/lpfc.ko] undefined! Tested on next-20160601. Signed-off-by:Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
-
Jack Miller authored
Adds two tests. One is a simple test to ensure that the new registers LMRR and LMSER are properly maintained. The other actually uses the existing EBB test infrastructure to test that LMRR and LMSER behave as documented. Signed-off-by:
Jack Miller <jack@codezen.org> Signed-off-by:
-
Jack Miller authored
This enables new registers, LMRR and LMSER, that can trigger an EBB in userspace code when a monitored load (via the new ldmx instruction) loads memory from a monitored space. This facility is controlled by a new FSCR bit, LM. This patch disables the FSCR LM control bit on task init and enables that bit when a load monitor facility unavailable exception is taken for using it. On context switch, this bit is then used to determine whether the two relevant registers are saved and restored. This is done lazily for performance reasons. Signed-off-by:
-
Michael Neuling authored
This fixes a few issues with FSCR init and switching. In commit 152d523e ("powerpc: Create context switch helpers save_sprs() and restore_sprs()") we moved the setting of the FSCR register from inside an CPU_FTR_ARCH_207S section to inside just a CPU_FTR_ARCH_DSCR section. Hence we are setting FSCR on POWER6/7 where the FSCR doesn't exist. This is harmless but we shouldn't do it. Also, we can simplify the FSCR context switch. We don't need to go through the calculation involving dscr_inherit. We can just restore what we saved last time. We also set an initial value in INIT_THREAD, so that pid 1 which is cloned from that gets a sane value. Based on patch by Jack Miller. Signed-off-by:
-
Madhavan Srinivasan authored
Current comment in the early_setup_secondary() for paca->soft_enabled update is misleading. Comment should say to Mark interrupts "disabled" instead of "enabled". Fix the typo. Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Thiago Jung Bauermann authored
Fixes the following testsuite failure: $ sudo ./perf test -v kallsyms 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 12489 Using /proc/kcore for kernel object code Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols 0xc00000000003d300: diff name v: .kretprobe_trampoline_holder k: kretprobe_trampoline Maps only in vmlinux: c00000000086ca38-c000000000879b6c 87ca38 [kernel].text.unlikely c000000000879b6c-c000000000bf0000 889b6c [kernel].meminit.text c000000000bf0000-c000000000c53264 c00000 [kernel].init.text c000000000c53264-d000000004250000 c63264 [kernel].exit.text d000000004250000-d000000004450000 0 [libcrc32c] d000000004450000-d000000004620000 0 [xfs] d000000004620000-d000000004680000 0 [autofs4] d000000004680000-d0000000046e0000 0 [x_tables] d0000000046e0000-d000000004780000 0 [ip_tables] d000000004780000-d0000000047e0000 0 [rng_core] d0000000047e0000-ffffffffffffffff 0 [pseries_rng] Maps in vmlinux with a different name in kallsyms: Maps only in kallsyms: d000000000000000-f000000000000000 1000000000010000 [kernel.kallsyms] f000000000000000-ffffffffffffffff 3000000000010000 [kernel.kallsyms] test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! The problem is that the kretprobe_trampoline symbol looks like this: $ eu-readelf -s /boot/vmlinux G kretprobe_trampoline 2431: c000000001302368 24 NOTYPE LOCAL DEFAULT 37 kretprobe_trampoline_holder 2432: c00000000003d300 8 FUNC LOCAL DEFAULT 1 .kretprobe_trampoline_holder 97543: c00000000003d300 0 NOTYPE GLOBAL DEFAULT 1 kretprobe_trampoline Its type is NOTYPE, and its size is 0, and this is a problem because symbol-elf.c:dso__load_sym skips function symbols that are not STT_FUNC or STT_GNU_IFUNC (this is determined by elf_sym__is_function). Even if the type is changed to STT_FUNC, when dso__load_sym calls symbols__fixup_duplicate, the kretprobe_trampoline symbol is dropped in favour of .kretprobe_trampoline_holder because the latter has non-zero size (as determined by choose_best_symbol). With this patch, all vmlinux symbols match /proc/kallsyms and the testcase passes. Commit c1c355ce ("x86/kprobes: Get rid of kretprobe_trampoline_holder()") gets rid of kretprobe_trampoline_holder altogether on x86. This commit does the same on powerpc. This change introduces no regressions on the perf and ftracetest testsuite results. Reviewed-by:
Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by:
-
- 17 Jun, 2016 1 commit
-
-
Russell Currey authored
On Book3E CPUs (and possibly other configs), it is possible to have SRIOV (CONFIG_PCI_IOV) set without CONFIG_EEH. The SRIOV code does not check for this, and if EEH is disabled, pci_dn.c fails to build. Fix this by gating the EEH-specific code in the SRIOV implementation behind CONFIG_EEH. Fixes: 39218cd0 ("powerpc/eeh: EEH device for VF") Reported-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
-
- 16 Jun, 2016 8 commits
-
-
Frederic Barrat authored
On bare-metal, when a device is attached to the cxl card, lsvpd shows a location code such as (with cxlflash): # lsvpd -l sg22 ... *YL U78CB.001.WZS0073-P1-C33-B0-T0-L0 which makes it hard to easily identify the cxl adapter owning the flash device, since in this example C33 refers to a P8 processor. lsvpd looks in the parent devices until it finds a location code, so the device node for the vPHB ends up being used. By reusing the device node of the adapter for the vPHB, lsvpd shows: # lsvpd -l sg16 ... *YL U78C9.001.WZS09XA-P1-C7-B1-T0-L3 where C7 is the PCI slot of the cxl adapter. On powerVM, the vPHB was already using the adapter device node, so there's no change there. Tested by cxlflash on bare-metal and powerVM. Signed-off-by:Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
-
Ian Munsie authored
This adds support for using CAPP DMA mode, which is required for XSL based cards such as the Mellanox CX4 to function. This is currently an RFC as it depends on the corresponding support to be merged into skiboot first, which was submitted here: http://patchwork.ozlabs.org/patch/625582/ In the event that the skiboot on the system does not have the above support, it will indicate as such in the kernel log and abort the init process. Signed-off-by:
-
Frederic Barrat authored
The XSL (Translation Service Layer) is a stripped down version of the PSL (Power Service Layer) used in some cards such as the Mellanox CX4. Like the PSL, it implements the CAIA architecture, but has a number of differences, mostly in it's implementation dependent registers. This adds an ops structure to abstract these differences to bring initial support for XSL CAPI devices. The XSL does not implement the optional architected SERR register, however while it treats it as a reserved register and should work with no special treatment, attempting to access it will cause the XSL_FEC (First Error Capture) register to be filled out, preventing it from capturing any subsequent errors. Therefore, this patch also prevents the kernel from trying to set up the SERR register so that the FEC register may still be useful, and to save one interrupt. The XSL also uses a special DMA cxl mode, which uses a slightly different init sequence for the CAPP and PHB. The kernel support for this will be in a future patch once the corresponding support has been merged into skiboot. Co-authored-by:
-
Ian Munsie authored
In the kernel API, it is possible to attempt to allocate AFU interrupts after already starting a context. Since the process element structure used by the hardware is only filled out at the time the context is started, it will not be updated with the interrupt numbers that have just been allocated and therefore AFU interrupts will not work unless they were allocated prior to starting the context. This can present some difficulties as each CAPI enabled PCI device in the kernel API has a default context, which may need to be started very early to enable translations, potentially before interrupts can easily be set up. This patch makes the API more flexible to allow interrupts to be allocated after a context has already been started and takes care of updating the PE structure used by the hardware and notifying it to discard any cached copy it may have. The update is currently performed via a terminate/remove/add sequence. This is necessary on some hardware such as the XSL that does not properly support the update LLCMD. Note that this is only supported on powernv at present - attempting to perform this ordering on PowerVM will raise a warning. Signed-off-by:
-
Andrew Donnellan authored
Make a couple more variables static. Found by sparse. Signed-off-by:
-
Daniel Axtens authored
Sparse complains that it doesn't know what REG_BYTE is: arch/powerpc/kernel/align.c:313:29: error: undefined identifier 'REG_BYTE' REG_BYTE is defined differently based on whether we're compiling for LE, BE32 or BE64. Sparse apparently doesn't provide __BIG_ENDIAN__ or __LITTLE_ENDIAN__, which means we get no definition. Rather than check for __BIG_ENDIAN__ and then separately for __LITTLE_ENDIAN__, just switch the #ifdef to check for __BIG_ENDIAN__ and then #else we define the little endian version. Technically that's dicey because PDP_ENDIAN is also a possibility, but we already do it in a lot of places so one more hardly matters. Signed-off-by:
-
Daniel Axtens authored
Sometimes headers that provide prototypes for functions are accidentally omitted from the files that define the functions. Fix a couple of times that occurs. Signed-off-by:
-
Daniel Axtens authored
Sparse picked up a number of functions that are implemented in C and then only referred to in asm code. This introduces asm-prototypes.h, which provides a place for prototypes of these functions. This silences some sparse warnings. Signed-off-by:
-
