- 16 Feb, 2018 40 commits
-
-
Mauro Carvalho Chehab authored
commit 81742be1 upstream. Before this patch, when compiled for arm32, the signal strength were reported as: Lock (0x1f) Signal= 4294908.66dBm C/N= 12.79dB Because of a 32 bit integer overflow. After it, it is properly reported as: Lock (0x1f) Signal= -58.64dBm C/N= 12.79dB Fixes: 0f91c9d6 ("[media] TS2020: Calculate tuner gain correctly") Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Kaiser authored
commit 0be26725 upstream. When the watchdog device is suspended, its timeout is set to the maximum value. During resume, the previously set timeout should be restored. This does not work at the moment. The suspend function calls imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME); and resume reverts this by calling imx2_wdt_set_timeout(wdog, wdog->timeout); However, imx2_wdt_set_timeout() updates wdog->timeout. Therefore, wdog->timeout is set to IMX2_WDT_MAX_TIME when we enter the resume function. Fix this by adding a new function __imx2_wdt_set_timeout() which only updates the hardware settings. imx2_wdt_set_timeout() now calls __imx2_wdt_set_timeout() and then saves the new timeout to wdog->timeout. During suspend, we call __imx2_wdt_set_timeout() directly so that wdog->timeout won't be updated and we can restore the previous value during resume. This approach makes wdog->timeout different from the actual setting in the hardware which is usually not a good thing. However, the two differ only while we're suspended and no kernel code is running, so it should be ok in this case. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Liran Alon authored
commit 6b697711 upstream. Consider the following scenario: 1. CPU A calls vmx_deliver_nested_posted_interrupt() to send an IPI to CPU B via virtual posted-interrupt mechanism. 2. CPU B is currently executing L2 guest. 3. vmx_deliver_nested_posted_interrupt() calls kvm_vcpu_trigger_posted_interrupt() which will note that vcpu->mode == IN_GUEST_MODE. 4. Assume that before CPU A sends the physical POSTED_INTR_NESTED_VECTOR IPI, CPU B exits from L2 to L0 during event-delivery (valid IDT-vectoring-info). 5. CPU A now sends the physical IPI. The IPI is received in host and it's handler (smp_kvm_posted_intr_nested_ipi()) does nothing. 6. Assume that before CPU A sets pi_pending=true and KVM_REQ_EVENT, CPU B continues to run in L0 and reach vcpu_enter_guest(). As KVM_REQ_EVENT is not set yet, vcpu_enter_guest() will continue and resume L2 guest. 7. At this point, CPU A sets pi_pending=true and KVM_REQ_EVENT but it's too late! CPU B already entered L2 and KVM_REQ_EVENT will only be consumed at next L2 entry! Another scenario to consider: 1. CPU A calls vmx_deliver_nested_posted_interrupt() to send an IPI to CPU B via virtual posted-interrupt mechanism. 2. Assume that before CPU A calls kvm_vcpu_trigger_posted_interrupt(), CPU B is at L0 and is about to resume into L2. Further assume that it is in vcpu_enter_guest() after check for KVM_REQ_EVENT. 3. At this point, CPU A calls kvm_vcpu_trigger_posted_interrupt() which will note that vcpu->mode != IN_GUEST_MODE. Therefore, do nothing and return false. Then, will set pi_pending=true and KVM_REQ_EVENT. 4. Now CPU B continue and resumes into L2 guest without processing the posted-interrupt until next L2 entry! To fix both issues, we just need to change vmx_deliver_nested_posted_interrupt() to set pi_pending=true and KVM_REQ_EVENT before calling kvm_vcpu_trigger_posted_interrupt(). It will fix the first scenario by chaging step (6) to note that KVM_REQ_EVENT and pi_pending=true and therefore process nested posted-interrupt. It will fix the second scenario by two possible ways: 1. If kvm_vcpu_trigger_posted_interrupt() is called while CPU B has changed vcpu->mode to IN_GUEST_MODE, physical IPI will be sent and will be received when CPU resumes into L2. 2. If kvm_vcpu_trigger_posted_interrupt() is called while CPU B hasn't yet changed vcpu->mode to IN_GUEST_MODE, then after CPU B will change vcpu->mode it will call kvm_request_pending() which will return true and therefore force another round of vcpu_enter_guest() which will note that KVM_REQ_EVENT and pi_pending=true and therefore process nested posted-interrupt. Fixes: 705699a1 ("KVM: nVMX: Enable nested posted interrupt processing") Signed-off-by:
Liran Alon <liran.alon@oracle.com> Reviewed-by:
Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> [Add kvm_vcpu_kick to also handle the case where L1 doesn't intercept L2 HLT and L2 executes HLT instruction. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Marc Zyngier authored
commit 20e8175d upstream. KVM doesn't follow the SMCCC when it comes to unimplemented calls, and inject an UNDEF instead of returning an error. Since firmware calls are now used for security mitigation, they are becoming more common, and the undef is counter productive. Instead, let's follow the SMCCC which states that -1 must be returned to the caller when getting an unknown function number. Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Horia Geantă authored
commit 225ece3e upstream. In case DECO0 cannot be acquired - i.e. run_descriptor_deco0() fails with -ENODEV, caam_probe() enters an endless loop: run_descriptor_deco0 ret -ENODEV -> instantiate_rng -ENODEV, overwritten by -EAGAIN ret -EAGAIN -> caam_probe -EAGAIN results in endless loop It turns out the error path in instantiate_rng() is incorrect, the checks are done in the wrong order. Fixes: 1005bccd ("crypto: caam - enable instantiation of all RNG4 state handles") Reported-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Suggested-by:
Auer Lukas <lukas.auer@aisec.fraunhofer.de> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Daniel Mentz authored
commit a1dfb4c4 upstream. The 32-bit compat v4l2 ioctl handling is implemented based on its 64-bit equivalent. It converts 32-bit data structures into its 64-bit equivalents and needs to provide the data to the 64-bit ioctl in user space memory which is commonly allocated using compat_alloc_user_space(). However, due to how that function is implemented, it can only be called a single time for every syscall invocation. Supposedly to avoid this limitation, the existing code uses a mix of memory from the kernel stack and memory allocated through compat_alloc_user_space(). Under normal circumstances, this would not work, because the 64-bit ioctl expects all pointers to point to user space memory. As a workaround, set_fs(KERNEL_DS) is called to temporarily disable this extra safety check and allow kernel pointers. However, this might introduce a security vulnerability: The result of the 32-bit to 64-bit conversion is writeable by user space because the output buffer has been allocated via compat_alloc_user_space(). A malicious user space process could then manipulate pointers inside this output buffer, and due to the previous set_fs(KERNEL_DS) call, functions like get_user() or put_user() no longer prevent kernel memory access. The new approach is to pre-calculate the total amount of user space memory that is needed, allocate it using compat_alloc_user_space() and then divide up the allocated memory to accommodate all data structures that need to be converted. An alternative approach would have been to retain the union type karg that they allocated on the kernel stack in do_video_ioctl(), copy all data from user space into karg and then back to user space. However, we decided against this approach because it does not align with other compat syscall implementations. Instead, we tried to replicate the get_user/put_user pairs as found in other places in the kernel: if (get_user(clipcount, &up->clipcount) || put_user(clipcount, &kp->clipcount)) return -EFAULT; Notes from hans.verkuil@cisco.com: This patch was taken from: https://github.com/LineageOS/android_kernel_samsung_apq8084/commit/97b733953c06e4f0398ade18850f0817778255f7 Clearly nobody could be bothered to upstream this patch or at minimum tell us :-( We only heard about this a week ago. This patch was rebased and cleaned up. Compared to the original I also swapped the order of the convert_in_user arguments so that they matched copy_in_user. It was hard to review otherwise. I also replaced the ALLOC_USER_SPACE/ALLOC_AND_GET by a normal function. Fixes: 6b5a9492 ("v4l: introduce string control support.") Signed-off-by:
Daniel Mentz <danielmentz@google.com> Co-developed-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
commit d83a8243 upstream. Some ioctls need to copy back the result even if the ioctl returned an error. However, don't do this for the error code -ENOTTY. It makes no sense in that cases. Signed-off-by:
-
Hans Verkuil authored
commit 169f24ca upstream. There is nothing wrong with using an unknown buffer type. So stop spamming the kernel log whenever this happens. The kernel will just return -EINVAL to signal this. Signed-off-by:
-
Hans Verkuil authored
commit a751be5b upstream. put_v4l2_window32() didn't copy back the clip list to userspace. Drivers can update the clip rectangles, so this should be done. Signed-off-by:
-
Daniel Mentz authored
commit 025a26fa upstream. Commit b2787845 ("V4L/DVB (5289): Add support for video output overlays.") added the field global_alpha to struct v4l2_window but did not update the compat layer accordingly. This change adds global_alpha to struct v4l2_window32 and copies the value for global_alpha back and forth. Signed-off-by:
-
Hans Verkuil authored
commit 273caa26 upstream. If the device is of type VFL_TYPE_SUBDEV then vdev->ioctl_ops is NULL so the 'if (!ops->vidioc_query_ext_ctrl)' check would crash. Add a test for !ops to the condition. All sub-devices that have controls will use the control framework, so they do not have an equivalent to ops->vidioc_query_ext_ctrl. Returning false if ops is NULL is the correct thing to do here. Fixes: b8c601e8 ("v4l2-compat-ioctl32.c: fix ctrl_is_pointer") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Hans Verkuil authored
commit b8c601e8 upstream. ctrl_is_pointer just hardcoded two known string controls, but that caused problems when using e.g. custom controls that use a pointer for the payload. Reimplement this function: it now finds the v4l2_ctrl (if the driver uses the control framework) or it calls vidioc_query_ext_ctrl (if the driver implements that directly). In both cases it can now check if the control is a pointer control or not. Signed-off-by:
-
Hans Verkuil authored
commit 8ed5a59d upstream. The struct v4l2_plane32 should set m.userptr as well. The same happens in v4l2_buffer32 and v4l2-compliance tests for this. Signed-off-by:
-
Hans Verkuil authored
commit 333b1e9f upstream. Instead of doing sizeof(struct foo) use sizeof(*up). There even were cases where 4 * sizeof(__u32) was used instead of sizeof(kp->reserved), which is very dangerous when the size of the reserved array changes. Signed-off-by:
-
Hans Verkuil authored
commit 486c5215 upstream. These helper functions do not really help. Move the code to the __get/put_v4l2_format32 functions. Signed-off-by:
-
Hans Verkuil authored
commit b7b957d4 upstream. The indentation of this source is all over the place. Fix this. This patch only changes whitespace. Signed-off-by:
-
Hans Verkuil authored
commit 3ee6d040 upstream. The result of the VIDIOC_PREPARE_BUF ioctl was never copied back to userspace since it was missing in the switch. Signed-off-by:
-
Ricardo Ribalda authored
commit 3171cc2b upstream. According to the doc, V4L2_BUF_FLAG_DONE is cleared after DQBUF: V4L2_BUF_FLAG_DONE 0x00000004 ... After calling the VIDIOC_QBUF or VIDIOC_DQBUF it is always cleared ... Unfortunately, it seems that videobuf2 keeps it set after DQBUF. This can be tested with vivid and dev_debug: [257604.338082] video1: VIDIOC_DQBUF: 71:33:25.00260479 index=3, type=vid-cap, flags=0x00002004, field=none, sequence=163, memory=userptr, bytesused=460800, offset/userptr=0x344b000, length=460800 This patch forces FLAG_DONE to 0 after calling DQBUF. Reported-by:
Dimitrios Katsaros <patcherwork@gmail.com> Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Hans Verkuil authored
commit 181a4a2d upstream. If the ioctl returned -ENOTTY, then don't bother copying back the result as there is no point. Signed-off-by:
-
Cong Wang authored
commit 073c516f upstream. Andrey reported a use-after-free in __ns_get_path(): spin_lock include/linux/spinlock.h:299 [inline] lockref_get_not_dead+0x19/0x80 lib/lockref.c:179 __ns_get_path+0x197/0x860 fs/nsfs.c:66 open_related_ns+0xda/0x200 fs/nsfs.c:143 sock_ioctl+0x39d/0x440 net/socket.c:1001 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1bf/0x1780 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 We are under rcu read lock protection at that point: rcu_read_lock(); d = atomic_long_read(&ns->stashed); if (!d) goto slow; dentry = (struct dentry *)d; if (!lockref_get_not_dead(&dentry->d_lockref)) goto slow; rcu_read_unlock(); but don't use a proper RCU API on the free path, therefore a parallel __d_free() could free it at the same time. We need to mark the stashed dentry with DCACHE_RCUACCESS so that __d_free() will be called after all readers leave RCU. Fixes: e149ed2b ("take the targets of /proc/*/ns/* symlinks to separate fs") Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Biggers <ebiggers3@gmail.com> Signed-off-by:
-
Eric Biggers authored
commit a16e772e upstream. Since Poly1305 requires a nonce per invocation, the Linux kernel implementations of Poly1305 don't use the crypto API's keying mechanism and instead expect the key and nonce as the first 32 bytes of the data. But ->setkey() is still defined as a stub returning an error code. This prevents Poly1305 from being used through AF_ALG and will also break it completely once we start enforcing that all crypto API users (not just AF_ALG) call ->setkey() if present. Fix it by removing crypto_poly1305_setkey(), leaving ->setkey as NULL. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
commit 841a3ff3 upstream. When the cryptd template is used to wrap an unkeyed hash algorithm, don't install a ->setkey() method to the cryptd instance. This change is necessary for cryptd to keep working with unkeyed hash algorithms once we start enforcing that ->setkey() is called when present. Signed-off-by:
-
Eric Biggers authored
commit cd6ed77a upstream. Templates that use an shash spawn can use crypto_shash_alg_has_setkey() to determine whether the underlying algorithm requires a key or not. But there was no corresponding function for ahash spawns. Add it. Note that the new function actually has to support both shash and ahash algorithms, since the ahash API can be used with either. Signed-off-by:
-
Mika Westerberg authored
commit f919dde0 upstream. Add Intel Cannon Lake PCH-H PCI ID to the list of supported controllers. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 998008b7 upstream. Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI SATA controllers. This commit is a preparation patch for allowing a different default sata link powermanagement policy for mobile chipsets. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit ca1b4974 upstream. Intel uses different SATA PCI ids for the Desktop and Mobile SKUs of their chipsets. For older models the comment describing which chipset the PCI id is for, aksi indicates when we're dealing with a mobile SKU. Extend the comments for recent chipsets to also indicate mobile SKUs. The information this commit adds comes from Intel's chipset datasheets. This commit is a preparation patch for allowing a different default sata link powermanagement policy for mobile chipsets. Signed-off-by:
-
Ivan Vecera authored
commit ba87977a upstream. Commit b7ce40cf ("kernfs: cache atomic_write_len in kernfs_open_file") changes type of local variable 'len' from ssize_t to size_t. This change caused that the *ppos value is updated also when the previous write callback failed. Mentioned snippet: ... len = ops->write(...); <- return value can be negative ... if (len > 0) <- true here in this case *ppos += len; ... Fixes: b7ce40cf ("kernfs: cache atomic_write_len in kernfs_open_file") Acked-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Eric Biggers authored
commit 49686cbb upstream. nfs_idmap_legacy_upcall() is supposed to be called with 'aux' pointing to a 'struct idmap', via the call to request_key_with_auxdata() in nfs_idmap_request_key(). However it can also be reached via the request_key() system call in which case 'aux' will be NULL, causing a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall(), assuming that the key description is valid enough to get that far. Fix this by making nfs_idmap_legacy_upcall() negate the key if no auxdata is provided. As usual, this bug was found by syzkaller. A simple reproducer using the command-line keyctl program is: keyctl request2 id_legacy uid:0 '' @s Fixes: 57e62324 ("NFS: Store the legacy idmapper result in the keyring") Reported-by: syzbot+5dfdbcf7b3eb5912abbb@syzkaller.appspotmail.com Signed-off-by:
Trond Myklebust <trondmy@gmail.com> Signed-off-by:
-
J. Bruce Fields authored
commit 1b8d97b0 upstream. If some of the WRITE calls making up an O_DIRECT write syscall fail, we neglect to commit, even if some of the WRITEs succeed. We also depend on the commit code to free the reference count on the nfs_page taken in the "if (request_commit)" case at the end of nfs_direct_write_completion(). The problem was originally noticed because ENOSPC's encountered partway through a write would result in a closed file being sillyrenamed when it should have been unlinked. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 7f1bda44 upstream. The commit list can get very large, and so we need a cond_resched() in nfs_commit_release_pages() in order to ensure we don't hog the CPU for excessive periods of time. Reported-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
-
Scott Mayhew authored
commit ba4a76f7 upstream. Currently when falling back to doing I/O through the MDS (via pnfs_{read|write}_through_mds), the client frees the nfs_pgio_header without releasing the reference taken on the dreq via pnfs_generic_pg_{read|write}pages -> nfs_pgheader_init -> nfs_direct_pgio_init. It then takes another reference on the dreq via nfs_generic_pg_pgios -> nfs_pgheader_init -> nfs_direct_pgio_init and as a result the requester will become stuck in inode_dio_wait. Once that happens, other processes accessing the inode will become stuck as well. Ensure that pnfs_read_through_mds() and pnfs_write_through_mds() clean up correctly by calling hdr->completion_ops->completion() instead of calling hdr->release() directly. This can be reproduced (sometimes) by performing "storage failover takeover" commands on NetApp filer while doing direct I/O from a client. This can also be reproduced using SystemTap to simulate a failure while doing direct I/O from a client (from Dave Wysochanski <dwysocha@redhat.com>): stap -v -g -e 'probe module("nfs_layout_nfsv41_files").function("nfs4_fl_prepare_ds").return { $return=NULL; exit(); }' Suggested-by:
Scott Mayhew <smayhew@redhat.com> Fixes: 1ca018d2 ("pNFS: Fix a memory leak when attempted pnfs fails") Signed-off-by:
-
Bradley Bolen authored
commit 7f29ae9f upstream. This fixes a race with idr_alloc where gd->first_minor can be set to the same value for two simultaneous calls to ubiblock_create. Each instance calls device_add_disk with the same first_minor. device_add_disk calls bdi_register_owner which generates several warnings. WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/devices/virtual/bdi/252:2' WARNING: CPU: 1 PID: 179 at kernel-source/lib/kobject.c:240 kobject_add_internal+0x1ec/0x2f8 kobject_add_internal failed for 252:2 with -EEXIST, don't try to register things with the same name in the same directory WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/dev/block/252:2' However, device_add_disk does not error out when bdi_register_owner returns an error. Control continues until reaching blk_register_queue. It then BUGs. kernel BUG at kernel-source/fs/sysfs/group.c:113! [<c01e26cc>] (internal_create_group) from [<c01e2950>] (sysfs_create_group+0x20/0x24) [<c01e2950>] (sysfs_create_group) from [<c00e3d38>] (blk_trace_init_sysfs+0x18/0x20) [<c00e3d38>] (blk_trace_init_sysfs) from [<c02bdfbc>] (blk_register_queue+0xd8/0x154) [<c02bdfbc>] (blk_register_queue) from [<c02cec84>] (device_add_disk+0x194/0x44c) [<c02cec84>] (device_add_disk) from [<c0436ec8>] (ubiblock_create+0x284/0x2e0) [<c0436ec8>] (ubiblock_create) from [<c0427bb8>] (vol_cdev_ioctl+0x450/0x554) [<c0427bb8>] (vol_cdev_ioctl) from [<c0189110>] (vfs_ioctl+0x30/0x44) [<c0189110>] (vfs_ioctl) from [<c01892e0>] (do_vfs_ioctl+0xa0/0x790) [<c01892e0>] (do_vfs_ioctl) from [<c0189a14>] (SyS_ioctl+0x44/0x68) [<c0189a14>] (SyS_ioctl) from [<c0010640>] (ret_fast_syscall+0x0/0x34) Locking idr_alloc/idr_remove removes the race and keeps gd->first_minor unique. Fixes: 2bf50d42 ("UBI: block: Dynamically allocate minor numbers") Signed-off-by:
Bradley Bolen <bradleybolen@gmail.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Miquel Raynal authored
commit f4c6cd1a upstream. When the requested ECC strength does not exactly match the strengths supported by the ECC engine, the driver is selecting the closest strength meeting the 'selected_strength > requested_strength' constraint. Fix the fact that, in this particular case, ecc->strength value was not updated to match the 'selected_strength'. For instance, one can encounter this issue when no ECC requirement is filled in the device tree while the NAND chip minimum requirement is not a strength/step_size combo natively supported by the ECC engine. Fixes: 1fef62c1 ("mtd: nand: add sunxi NAND flash controller support") Suggested-by:
Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by:
-
Miquel Raynal authored
commit 87e89ce8 upstream. Starting from commit 041e4575 ("mtd: nand: handle ECC errors in OOB"), nand_do_read_oob() (from the NAND core) did return 0 or a negative error, and the MTD layer expected it. However, the trend for the NAND layer is now to return an error or a positive number of bitflips. Deciding which status to return to the user belongs to the MTD layer. Commit e47f6858 ("mtd: check for max_bitflips in mtd_read_oob()") brought this logic to the mtd_read_oob() function while the return value coming from nand_do_read_oob() (called by the ->_read_oob() hook) was left unchanged. Fixes: e47f6858 ("mtd: check for max_bitflips in mtd_read_oob()") Signed-off-by:
-
Kamal Dasu authored
commit f953f0f8 upstream. Brcm nand controller prefetch feature needs to be disabled by default. Enabling affects performance on random reads as well as dma reads. Signed-off-by:
Kamal Dasu <kdasu.kdev@gmail.com> Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit 9e343e87 upstream. The map_word_() functions, dating back to linux-2.6.8, try to perform bitwise operations on a 'map_word' structure. This may have worked with compilers that were current then (gcc-3.4 or earlier), but end up being rather inefficient on any version I could try now (gcc-4.4 or higher). Specifically we hit a problem analyzed in gcc PR81715 where we fail to reuse the stack space for local variables. This can be seen immediately in the stack consumption for cfi_staa_erase_varsize() and other functions that (with CONFIG_KASAN) can be up to 2200 bytes. Changing the inline functions into macros brings this down to 1280 bytes. Without KASAN, the same problem exists, but the stack consumption is lower to start with, my patch shrinks it from 920 to 496 bytes on with arm-linux-gnueabi-gcc-5.4, and saves around 1KB in .text size for cfi_cmdset_0020.c, as it avoids copying map_word structures for each call to one of these helpers. With the latest gcc-8 snapshot, the problem is fixed in upstream gcc, but nobody uses that yet, so we should still work around it in mainline kernels and probably backport the workaround to stable kernels as well. We had a couple of other functions that suffered from the same gcc bug, and all of those had a simpler workaround involving dummy variables in the inline function. Unfortunately that did not work here, the macro hack was the best I could come up with. It would also be helpful to have someone to a little performance testing on the patch, to see how much it helps in terms of CPU utilitzation. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Malcolm Priestley authored
commit 7bf7a711 upstream. When the tuner was split from m88rs2000 the attach function is in wrong place. Move to dm04_lme2510_tuner to trap errors on failure and removing a call to lme_coldreset. Prevents driver starting up without any tuner connected. Fixes to trap for ts2020 fail. LME2510(C): FE Found M88RS2000 ts2020: probe of 0-0060 failed with error -11 ... LME2510(C): TUN Found RS2000 tuner kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Reported-by:
Malcolm Priestley <tvboxspy@gmail.com> Tested-by:
-
Malcolm Priestley authored
commit 3d932ee2 upstream. Warm start has no check as whether a genuine device has connected and proceeds to next execution path. Check device should read 0x47 at offset of 2 on USB descriptor read and it is the amount requested of 6 bytes. Fix for kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access as Reported-by:
-
Mohamed Ghannam authored
commit 69c64866 upstream. Whenever the sock object is in DCCP_CLOSED state, dccp_disconnect() must free dccps_hc_tx_ccid and dccps_hc_rx_ccid and set to NULL. Signed-off-by:
Mohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 364f5665 upstream. When issuing an IPI RT push, where an IPI is sent to each CPU that has more than one RT task scheduled on it, it references the root domain's rto_mask, that contains all the CPUs within the root domain that has more than one RT task in the runable state. The problem is, after the IPIs are initiated, the rq->lock is released. This means that the root domain that is associated to the run queue could be freed while the IPIs are going around. Add a sched_get_rd() and a sched_put_rd() that will increment and decrement the root domain's ref count respectively. This way when initiating the IPIs, the scheduler will up the root domain's ref count before releasing the rq->lock, ensuring that the root domain does not go away until the IPI round is complete. Reported-by:
Pavan Kondeti <pkondeti@codeaurora.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 4bdced5c ("sched/rt: Simplify the IPI based RT balancing logic") Link: http://lkml.kernel.org/r/CAEU1=PkiHO35Dzna8EQqNSKW1fr1y1zRQ5y66X117MG06sQtNA@mail.gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
