- 24 Oct, 2019 17 commits
-
-
Mika Kuoppala authored
On testing the whitelists, using any of the nonpriv flags when trying to access the register offset will lead to failure. Define address mask to get the mmio offset in order to guard against any current and future flag usage. v2: apply also on scrub_whitelisted_registers (Lionel) Cc: Tapani Pälli <tapani.palli@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
-
Ap Kamal authored
'Link CRC error' will now have same error level as other PSR2 errors like 'RFB storage error' and 'VSC SDP uncorrectable error'. Signed-off-by:
Ap Kamal <kamal.ap@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Ville Syrjälä authored
snb supports fp16 pixel formats on the sprite planes. Expose that capability. Nothing special needs to be done, it just works. v2: Rebase on top of icl fp16 Split snb+ sprite bits into a separate patch Reviewed-by:Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-11-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
ivb+ supports fp16 pixel formats on the sprite planes planes. Expose that capability. On ivb/hsw fp16 scanout is slightly busted. The output from the plane will have 1/4 the expected value. For the sprite plane we can fix that up with the plane gamma unit. This was fixed on bdw. v2: Rebase on top of icl fp16 Split the ivb+ sprite birs into a separate patch v3: Move ivb_need_sprite_gamma() check one level up so that we don't waste time programming garbage into he gamma registers Reviewed-by: -
Ville Syrjälä authored
gen4+ supports fp16 pixel formats on the primary planes. Add the relevant code. On ivb fp16 scanout is slightly busted. The output from the plane will have 1/4 the expected value. For the primary plane we would have to use the pipe gamma or pipe csc to correct that which would affect all the other planes as well, hence we simply choose not to expose fp16 on the ivb primary plane. On hsw the primary plane got fixed. On gmch platforms I observed that the plane width must be below 2k pixels with fp16 or else we get a corrupted image. This limitation does not seem to be documented in bspec. I verified the exact limit using the chv pipe B primary plane since it has windowing capability. The stride limits are unaffected by fp16. v2: Rebase on top of icl fp16 Split thea gen4+ primary plane bits into a separate patch Deal with HAS_GMCH() Reviewed-by: -
Ville Syrjälä authored
skl+ supports fp16 pixel formats on all universal planes. Add the necessary bits to expose that capability. The main different to icl is that we can't scale fp16, so need to add the relevant checks. v2: Rebase on top of icl fp16 Split skl+ bits into a separate patch Reviewed-by: -
Ville Syrjälä authored
Now that the planes declare their minimum cdclk requirements properly we don't need to check the cdclk in skl_max_scale() anymore. Just check against the maximum downscale ratio, and move the code next to it's only caller. v2: Add a comment explaining the HQ vs. not thing Reviewed-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
The normal cdclk handling now takes care of making sure the plane's pixel rate doesn't exceed the spec appointed percentage of the cdclk frequency. Thus we can nuke skl_check_pipe_max_pixel_rate(). Reviewed-by:
-
Ville Syrjälä authored
Various pixel formats and plane scaling impose additional constraints on the cdclk frequency. Provide a new plane->min_cdclk() hook that will be used to compute the minimum acceptable cdclk frequency for each plane. Annoyingly on some platforms the numer of active planes affects this calculation so we must also toss in more planes into the state when the number of active planes changes. The sequence of state computation must also be changed: 1. check_plane() (updates plane's visibility etc.) 2. figure out if more planes now require update min_cdclk computaion 3. calculate the new min cdclk for each plane in the state 4. if the minimum of any plane now exceeds the current logical cdclk we recompute the cdclk 4. during cdclk computation take the planes' min_cdclk into accoutn 5. follow the normal cdclk programming to change the cdclk frequency. This may now require a modeset (except on bxt/glk in some cases), which either succeeds or fails depending on whether userspace has given us permission to perform a modeset or not. v2: Fix plane id check in intel_crtc_add_planes_to_state() Only print the debug message when cdclk needs bumping Use dev_priv->cdclk... as the old state explicitly Reviewed-by: -
Ville Syrjälä authored
check_digital_port_conflicts() is done needlessly late. Move it earlier. This will be needed as later on we want to set any_ms=true a bit later for non-modesets too and we can't call this guy without the connection_mutex held. Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
So far we've sort of protected the global state under dev_priv with the connection_mutex. I wan to change that so that we can change the cdclk even for pure plane updates. To that end let's formalize the protection of the global state to follow what I started with the cdclk code already (though not entirely properly) such that any crtc mutex will suffice as a read lock, and all crtcs mutexes act as the write lock. We'll also pimp intel_atomic_state_clear() to clear the entire global state, so that we don't accidentally leak stale information between the locking retries. As a slight optimization we'll only lock the crtc mutexes to protect the global state, however if and when we actually have to poke the hw (eg. if the actual cdclk changes) we must serialize commits across all crtcs so that a parallel nonblocking commit can't get ahead of the cdclk reprogamming. We do that by adding all crtcs to the state. TODO: the old global state examined during commit may still be a problem since it always looks at the _latest_ swapped state in dev_priv. Need to add proper old/new state for that too I think. v2: Remeber to serialize the commits if necessary Signed-off-by:
-
Ville Syrjälä authored
To make the logs a bit less confusing let's toss in some debug prints to indicate whether the cdclk reprogramming is going to happen with a single pipe active or whether we need to turn all pipes off for the duration. Signed-off-by:
-
Anna Karas authored
Add missing descriptions of i915_perf_stream structure members to documentation. Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Robert Bragg <robert@sixbynine.org> Signed-off-by:
Anna Karas <anna.karas@intel.com> Reviewed-by:
-
Chris Wilson authored
Split the legacy submission backend from the common CS ring buffer handling. Signed-off-by:
-
Tvrtko Ursulin authored
One more thing which relied on implicit dev_priv can be covnerted to use the new mmio accessors. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Chris Wilson authored
Make trebly sure that all possible callbacks and their delayed brethren are complete before asserting that the i915_active should be idle after flushing all barriers. Signed-off-by:
-
Chris Wilson authored
When setting up the system to perform the atomic reset, we need to serialise with any ongoing interrupt tasklet or else: <0> [472.951428] i915_sel-4442 0d..1 466527056us : __i915_request_submit: rcs0 fence 11659:2, current 0 <0> [472.951554] i915_sel-4442 0d..1 466527059us : __execlists_submission_tasklet: rcs0: queue_priority_hint:-2147483648, submit:yes <0> [472.951681] i915_sel-4442 0d..1 466527061us : trace_ports: rcs0: submit { 11659:2, 0:0 } <0> [472.951805] i915_sel-4442 0.... 466527114us : __igt_atomic_reset_engine: i915_reset_engine(rcs0:active) under hardirq <0> [472.951932] i915_sel-4442 0d... 466527115us : intel_engine_reset: rcs0 flags=11d <0> [472.952056] i915_sel-4442 0d... 466527117us : execlists_reset_prepare: rcs0: depth<-1 <0> [472.952179] i915_sel-4442 0d... 466527119us : intel_engine_stop_cs: rcs0 <0> [472.952305] <idle>-0 1..s1 466527119us : process_csb: rcs0 cs-irq head=3, tail=4 <0> [472.952431] i915_sel-4442 0d... 466527122us : __intel_gt_reset: engine_mask=1 <0> [472.952557] <idle>-0 1..s1 466527124us : process_csb: rcs0 csb[4]: status=0x00000001:0x00000000 <0> [472.952683] <idle>-0 1..s1 466527130us : trace_ports: rcs0: promote { 11659:2*, 0:0 } <0> [472.952808] i915_sel-4442 0d... 466527131us : execlists_reset: rcs0 <0> [472.952933] i915_sel-4442 0d..1 466527133us : process_csb: rcs0 cs-irq head=3, tail=4 <0> [472.953059] i915_sel-4442 0d..1 466527134us : process_csb: rcs0 csb[4]: status=0x00000001:0x00000000 <0> [472.953185] i915_sel-4442 0d..1 466527136us : trace_ports: rcs0: preempted { 11659:2*, 0:0 } <0> [472.953310] i915_sel-4442 0d..1 466527150us : assert_pending_valid: Nothing pending for promotion! <0> [472.953436] i915_sel-4442 0d..1 466527158us : process_csb: process_csb:1930 GEM_BUG_ON(!assert_pending_valid(execlists, "promote")) We have the same CSB events being seen by process_csb() on two different processors. One being issued by the reset in the test, the other by the interrupt; this scenario is supposed to be prevented by flushing the interrupt tasklet with tasklet_disable() before we enter the atomic reset. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112069Signed-off-by:
-
- 23 Oct, 2019 12 commits
-
-
Zhenyu Wang authored
As early workload scan and shadow happens in execlist mmio handler, which has already taken vgpu_lock. So remove extra lock taking here. Fixes: 952f89f0 ("drm/i915/gvt: Wean off struct_mutex") Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
Replace sampling the engine state every so often with a periodic heartbeat request to measure the health of an engine. This is coupled with the forced-preemption to allow long running requests to survive so long as they do not block other users. Signed-off-by:
Jon Bloomfield <jon.bloomfield@intel.com> Reviewed-by:
-
Chris Wilson authored
Normally, we rely on our hangcheck to prevent persistent batches from hogging the GPU. However, if the user disables hangcheck, this mechanism breaks down. Despite our insistence that this is unsafe, the users are equally insistent that they want to use endless batches and will disable the hangcheck mechanism. We are looking at replacing hangcheck, in the next patch, with a softer mechanism, that sends a pulse down the engine to check if it is well. We can use the same preemptive pulse to flush an active context off the GPU upon context close, preventing resources being lost and unkillable requests remaining on the GPU after process termination. Testcase: igt/gem_ctx_exec/basic-nohangcheck Signed-off-by:
-
Chris Wilson authored
On schedule-out (CS completion) of a banned context, scrub the context image so that we do not replay the active payload. The intent is that we skip banned payloads on request submission so that the timeline advancement continues on in the background. However, if we are returning to a preempted request, i915_request_skip() is ineffective and instead we need to patch up the context image so that it continues from the start of the next request. v2: Fixup cancellation so that we only scrub the payload of the active request and do not short-circuit the breadcrumbs (which might cause other contexts to execute out of order). v3: Grammar pass Signed-off-by:
-
Chris Wilson authored
If the preempted context takes too long to relinquish control, e.g. it is stuck inside a shader with arbitration disabled, evict that context with an engine reset. This ensures that preemptions are reasonably responsive, providing a tighter QoS for the more important context at the cost of flagging unresponsive contexts more frequently (i.e. instead of using an ~10s hangcheck, we now evict at ~100ms). The challenge of lies in picking a timeout that can be reasonably serviced by HW for typical workloads, balancing the existing clients against the needs for responsiveness. Note that coupled with timeslicing, this will lead to rapid GPU "hang" detection with multiple active contexts vying for GPU time. The forced preemption mechanism can be compiled out with ./scripts/config --set-val DRM_I915_PREEMPT_TIMEOUT 0 Signed-off-by:
-
Chris Wilson authored
If we are doing a normal GPU reset triggered after detecting a long period of stalled work, we can take our time and allow the engines to quiesce. Since we've stopped submission to the engine, and if we wait long enough an innocent context should complete, leaving the engine idle. So by waiting a short amount of time, we should prevent clobbering other users when resetting a stuck context. Suggested-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Suggested-by:
-
Robert M. Fosha authored
GuC enable logging H2G action definition changed some time ago from 0xE000 to 0x40. All current GuC FW blobs use this definition, so fix the action definition in driver to match. Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Robert M. Fosha <robert.m.fosha@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Robert M. Fosha authored
Creating and opening the GuC log relay file enables and starts the relay potentially before the caller is ready to consume logs. Change the behavior so that relay starts only on an explicit call to the write function (with a value of '1'). Other values flush the log relay as before. v2: Style changes and fix typos. Add guc_log_relay_stop() function. (Daniele) Cc: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
-
Imre Deak authored
Atm we don't detect a PCH with PCI ID 0xA3C1 which showed up now on a CML platform. We don't have the official assignment of the PCH PCI IDs, but this looks like a CNP which was already used on CML platforms. Let's add the new ID->PCH type mapping accordingly. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112051Reported-and-tested-by:
Cyrus <cyrus.lien@canonical.com> Cc: Cyrus <cyrus.lien@canonical.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Jani Nikula authored
DSC isn't DP specific, so remove the dp_ prefix from the crtc state member name. Also moving the member under the dsc sub-struct gives us enough context to allow shortening the name to just config. No functional changes. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022133414.8293-2-jani.nikula@intel.com
-
Jani Nikula authored
Reduce verbosity in code by renaming dsc_params member of crtc state to simply dsc. There is enough context for this to be clear. No functional changes. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
Chris Wilson authored
A lock once taken must be released again. Fixes: c31c9e82 ("drm/i915/selftests: Teach switch_to_context() to use the context") Signed-off-by:
-
- 22 Oct, 2019 11 commits
-
-
Chris Wilson authored
If retirement is running on another thread, we may inspect the status of the i915_active before its retirement callback is complete. As we expect it to be running synchronously, we can wait for any callback to complete by acquiring the i915_active.mutex. Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022112111.9317-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Forcewake is the speciality of the GT, so it is natural to run the intel_uncore_forcewake tests over the GT. So pass intel_gt as the parameter to our selftests. Signed-off-by:
-
Chris Wilson authored
The context details which engines to use, so use the ctx->engines[] to generate the requests to cause the context switch. Signed-off-by:
-
Chris Wilson authored
Again we wish to operate on the engines, which are owned by the intel_gt. As such it is easier, and much more consistent, to pass the intel_gt parameter. v2: Unexport i915_gem_load_power_context() Signed-off-by:
-
Chris Wilson authored
Separate each object class into a separate lock type to avoid lockdep cross-contamination between paths (i.e. userptr!). Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022144501.26486-1-chris@chris-wilson.co.uk
-
James Ausmus authored
Even the AML devices that behave like CFLs can be paired with an SPT PCH. Allow this to happen without blowing up dmesg. BSpec: 33665 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112013 Cc: Quanxian Wang <quanxian.wang@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
James Ausmus <james.ausmus@intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191017194203.9645-1-james.ausmus@intel.com
-
Chris Wilson authored
The actual conditions are that we know the GPU is not accessing the context, and we hold a pin on the context image to allow CPU access. We used a fake lock on ce->pin_mutex so that we could try and use lockdep to assert that access is serialised, but the various different hardirq/softirq contexts where we need to *fake* holding the pin_mutex are causing more trouble. Still it would be nice if we did have a way to reassure ourselves that the direct update to the context image is serialised with GPU execution. In the meantime, stop lockdep complaining about false irq inversions. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111923Signed-off-by:
-
Chris Wilson authored
Loop over all engines, issuing a request for the object on each in order to make sure we leave no stone unturned when creating an active ref. The purpose is to make sure that we can reap a zombie object (one that is only alive due to an active reference on the GPU) no matter where that active reference emanates from. Signed-off-by:
-
Tvrtko Ursulin authored
Contexts are not testing physical engines so it makes sense to use the uabi iterator. Signed-off-by:
-
Tvrtko Ursulin authored
Frees up two call sites from passing i915 to for_each_engine. Signed-off-by:
-
Tvrtko Ursulin authored
Just freeing up two more call sites from passing in i915 to for_each_engine. Signed-off-by:
-
