- 12 Apr, 2022 15 commits
-
-
Dmitry Baryshkov authored
Dragonboard845c doesn't have board-specific board-id programmed, it uses generic 0xff. Thus add the property with the 'variant' of the calibration data. Note: the driver will check for the calibration data for the following IDs, so older board-2.bin files that were distributed as a part of Linaro releases will continue to work. - 'bus=snoc,qmi-board-id=ff,qmi-chip-id=30214,variant=Thundercomm_DB845C' - 'bus=snoc,qmi-board-id=ff,qmi-chip-id=30214' - 'bus=snoc,qmi-board-id=ff' For the reference, the board is identified by the driver in the following way: ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40030001 ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b fw_build_timestamp 2018-07-19 12:28 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 Fixes: 3f72e2d3 ("arm64: dts: qcom: Add Dragonboard 845c") Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220403105711.1173161-1-dmitry.baryshkov@linaro.org
-
Krzysztof Kozlowski authored
The DT schema expects clocks core-iface order. No functional change. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
The DT schema expects dma channels in tx-rx order. No functional change. Signed-off-by:
-
Krzysztof Kozlowski authored
The "bluetooth" is more popular and more descriptive than "bt", for a Bluetooth device. The WCNSS DT schema will expect such naming. Signed-off-by:
-
Souradeep Chowdhury authored
Set the default dr_mode for usb2 node to "otg" to enable role-switch for EUD(Embedded USB Debugger) connector node. Signed-off-by:
Souradeep Chowdhury <quic_schowdhu@quicinc.com> Signed-off-by:
-
Manikanta Pubbisetty authored
Add DTS node for WCN6750 WiFi chipset. Signed-off-by:
Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Krzysztof Kozlowski authored
ref_clk clock in UFS node is already there with a <0 0> frequency, which matches other DTSI files. Signed-off-by:
-
Krzysztof Kozlowski authored
The Qualcomm UFS bindings require to use specific (qcom,msm8996-ufshc) and generic (jedec,ufs-2.0) compatibles. Signed-off-by:
-
Krzysztof Kozlowski authored
The property vddp-ref-clk-max-microamp (for VDDP ref clk supply which is l25 regulator) is not documented in MSM8996 UFS PHY bindings (qcom,msm8996-qmp-ufs-phy). It is mentioned in the other UFS PHY bindings for qcom,msm8996-ufs-phy-qmp-14nm. The MSM8996-based Xiaomi devices configure l25 regulator in a conflicting way: 1. with maximum 100 uAmp for VDDP ref clk supply of UFS PHY, 2. with maximum 450 mAmp for VCCQ supply of UFS. Since the vddp-ref-clk-max-microamp property is basically not documented for that UFS PHY and has a conflicting values, drop it entirely as it looks like not tested and not used ever. Signed-off-by:
-
Krzysztof Kozlowski authored
The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by:
-
Rob Herring authored
Boolean properties in DT are present or not present and don't take a value. A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't matter. It may have been intended that 0 values are false, but there is no change in behavior with this patch. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> [bjorn: Updated subject prefix] Signed-off-by:
-
Luca Weiss authored
Add a node for the haptics driver found on the phone. Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Luca Weiss authored
Add nodes for the I2C busses on sm6350. Signed-off-by:
-
Luca Weiss authored
The uart9 was previously mistakenly called uart2. Fix this. Signed-off-by:
-
Petr Vorel authored
Angler does not have SD card, thus sdhc2 kept disabled. Signed-off-by:
Petr Vorel <petr.vorel@gmail.com> Signed-off-by:
-
- 11 Apr, 2022 13 commits
-
-
Stephen Boyd authored
The SAR node, ap_sar_sensor, needs to be enabled in addition to the i2c bus it resides on. Let's simplify this by leaving the sensor node enabled by default while leaving the i2c bus disabled by default. On boards that use the sensor, we already enable the i2c bus so we can simply remove the extra bit that enables the sar sensor node. This saves some lines but is otherwise a non-functional change. Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Stephen Boyd authored
Having these pins with outputs is good on a fresh boot because it puts the boot and reset pins in a known "good" state. Unfortunately, that conflicts with the fingerprint firmware flashing code. The firmware flashing process binds and unbinds the cros-ec and spidev drivers and that reapplies the pin output values after the flashing code has overridden the gpio values. This causes a problem because we try to put the device into bootloader mode, bind the spidev driver and that inadvertently puts it right back into normal boot mode, breaking the flashing process. Fix this by removing the outputs. We'll introduce a binding for fingerprint cros-ec specifically to set the gpios properly via gpio APIs during cros-ec driver probe instead. Cc: Douglas Anderson <dianders@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Alexandru M Stan <amstan@chromium.org> Fixes: 116f7cc4 ("arm64: dts: qcom: sc7280: Add herobrine-r1") Signed-off-by:
-
Douglas Anderson authored
As talked about in commit 61a6262f ("arm64: dts: qcom: sc7280: Move herobrine-r0 to its own dts"), herobrine evolved pretty significantly after -r0 and newer revisions are pretty different. Nobody needs the old boards to keep working, so let's delete to avoid the maintenance burden. Signed-off-by:
-
Douglas Anderson authored
While scoping signals, we found that the PCIe signals weren't compliant at bootup. Specifically, the bootloader was setting up PCIe and leaving it configured, then jumping to the kernel. The kernel was turning off the regulator while leaving the PCIe clock running, which was a violation. In the regulator bindings (and the Linux kernel driver that uses them), there's currently no way to specify that a GPIO-controlled regulator should keep its state at bootup. You've got to pick either "on" or "off". Let's switch it so that the PCIe regulator defaults to "on" instead of "off". This should be a much safer way to go and avoids the timing violation. The regulator will still be turned off later if there are no users. Signed-off-by:
-
Matthias Kaehlcke authored
Add support for Qualcomm's SC7280 CRD rev5 (aka CRD 3.0/3.1). Signed-off-by:
Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by:
-
Matthias Kaehlcke authored
Not all herobrine boards have a world facing camera or a fingerprint sensor, disable the regulators that feed these devices by default and only enable them for the boards that use them. Similarly the audio configuration can vary between boards, not all boards have the regulator pp3300_codec, disable it by default. Signed-off-by:
-
Matthias Kaehlcke authored
With newer bootloader versions the crd-r3 (aka CRD 1.0 and 2.0) is identified as a 'piglin' board (like the IDP2 board), instead of 'hoglin' Add the compatible strings 'google,piglin-rev{3,4}'. The hoglin entries are kept to make sure the board keeps booting with older bootloader versions. The compatible string 'google,piglin' (without revision information) is still used by the IDP2 board, which is not expected to evolve further. Signed-off-by: -
Matthias Kaehlcke authored
There are multiple revisions of CRD boards. The current sc7280-crd.dts describes revision 3 and 4 (aka CRD 1.0 and 2.0). Support for a newer version will be added by another patch. Add the revision number to distinguish it from the versionn. Also add the revision numbers to the compatible string. Signed-off-by:
-
Ivy Jian authored
some panel can't light up with new board with ps8640, switch compatible panel define to make it workable. Signed-off-by:
Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Signed-off-by:
Ivy Jian <ivyjian417@gmail.com> Reviewed-by:
-
Rakesh Pillai authored
Add the WPSS remoteproc node in dts for PIL loading. Reviewed-by:
Rakesh Pillai <quic_pillair@quicinc.com> Signed-off-by:
-
Matthias Kaehlcke authored
Add a basic device tree for the herobrine villager board. Reviewed-by:
-
Matthias Kaehlcke authored
Add nodes for the two SX9324 SAR proximity sensors. Not all herobrine boards have these sensors, so leave them disabled by default. Signed-off-by:
-
Stephen Boyd authored
This node should be named sar1-irq-odl, not sar0-irq-odl. Otherwise we'll overwrite the settings for sar0 with what is intended for sar1, leading to probe failures for sar1 that are quite confusing. Fixes: 116f7cc4 ("arm64: dts: qcom: sc7280: Add herobrine-r1") Cc: Douglas Anderson <dianders@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
- 09 Apr, 2022 4 commits
-
-
Bhupesh Sharma authored
SA8155p ADP board supports the PCIe0 controller in the RC mode (only). So add the support for the same. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by:
-
Bhupesh Sharma authored
Add nodes for the two PCIe controllers found on the SM8150 SoC. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
Bhupesh Sharma authored
Add power-domain entries for UFS phy node in sm8150 dts. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
-
Bhupesh Sharma authored
Add pdc interrupt controller for sm8150. Cc: Maulik Shah <quic_mkshah@quicinc.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
-
- 03 Apr, 2022 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull more dma-mapping updates from Christoph Hellwig: - fix a regression in dma remap handling vs AMD memory encryption (me) - finally kill off the legacy PCI DMA API (Christophe JAILLET) * tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move pgprot_decrypted out of dma_pgprot PCI/doc: cleanup references to the legacy PCI DMA API PCI: Remove the deprecated "pci-dma-compat.h" API
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - avoid unnecessary rebuilds for library objects - fix return value of __setup handlers - fix invalid input check for "crashkernel=" kernel option - silence KASAN warnings in unwind_frame * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame() ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0' ARM: 9187/1: JIVE: fix return value of __setup handler ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
-
Stephen Boyd authored
This reverts commit 7dabfa2b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reported-by:
Tony Lindgren <tony@atomide.com> Reported-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
-
