- 15 May, 2023 8 commits
-
-
Jani Nikula authored
Add i915 parameter to I915_STATE_WARN() and use device based logging. Done using cocci + hand edited where there was no i915 local variable ready. v2: avoid null deref in verify_connector_state() Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512181658.1735594-1-jani.nikula@intel.com
-
Jani Nikula authored
Remove the unused macro. Signed-off-by:
-
Jani Nikula authored
Describe the assertion better. Signed-off-by:
-
Jani Nikula authored
In general, we don't do assertions that a function gets called on the right platforms, and if we did, it should not be a state warn. Signed-off-by:
-
Juha-Pekka Heikkila authored
Add Tile4 ccs modifiers w/ auxbuffer handling Implement Wa_14017240301 Bspec: 49251, 49252, 49253 Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by:
Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Juha-Pekka Heikkila authored
Add Tile4 type ccs modifiers with aux buffer needed for MTL Bspec: 49251, 49252, 49253 Cc: dri-devel@lists.freedesktop.org Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Jani Nikula authored
Add helper for reading SPI to not duplicate the write&read combo everywhere. Signed-off-by:
-
Suraj Kandpal authored
Check if media_gt exists if we are using gsc cs --v2 -correct typo [Ankit] -assign gsc variable if gt exists [Ankit] --v3 -declare gsc and gt variables in if block [Ankit] --v4 -add fixes tag [Ankit] Fixes: 88363177 ("drm/i915/mtl: Add HDCP GSC interface") Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230505041512.585486-1-suraj.kandpal@intel.com
-
- 12 May, 2023 1 commit
-
-
Jani Nikula authored
CHV_FUSE_GT (0x182168) is purely about GT fuses, therefore belongs in intel_gt_regs.h, is in the gcfgmmio unit, but is technically in the VLV display base area. Add VLV_GUNIT_BASE to drop dependency on VLV_DISPLAY_BASE and thus display/intel_display_reg_defs.h in intel_gt_regs.h. v2: Add VLV_GUNIT_BASE (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230511152153.986676-1-jani.nikula@intel.com
-
- 11 May, 2023 7 commits
-
-
Jani Nikula authored
Move gmbus and dp aux irq handlers to their respective files. It should be up to them what to do with the irq, not the generic irq code. Signed-off-by:
-
Ville Syrjälä authored
Now that we have encoder->devdata everwhere we don't need the intel_bios_is_port_dp_dual_mode() wrapper any more. And while at it let's include it in the child device log dump as well since the logic in there is a bit more complex than just DP&&HDMI. Signed-off-by:
-
Ville Syrjälä authored
Swap the roles of the index vs. value for the VBT DDC pin mapping tables. This is not strictly necessary for DDC pins but it will make this work exactly like the AUX CH mapping tables where the role reversal is necessary (or at least makes things easier). Consistency is good. Signed-off-by:
-
Ville Syrjälä authored
The big switch+if statement mess in map_aux_ch() is illegible. Split up into cleaner per-platform arrays like we already have for the gmbus pins. We use enum aux_ch as the index and the VBT thing as the value. Slightly non-intuitive perhaps but if we did it the other way around we'd have problems with AUX_CH_A being zero, and thus any non-populated element would look like AUX_CH_A. v2: flip the index vs. value around TODO: Didn't bother with the platform variants beyond the ones that really need remapping, which means if the VBT is bogus we end up with a nonexistent aux ch. Might be nice to check this a bit better. Yet another bitmask in device info? Signed-off-by: -
Ville Syrjälä authored
Modernize the DP AUX CH register definitions with REG_BIT() & co. Signed-off-by:
Jouni Högander <jouni.hogander@intel.com>
-
Ville Syrjälä authored
To avoid annoying spec lookups let's define more PS_CTRL bits in the header. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Jani Nikula authored
The display prefix is unnecessary within the display sub-directory. Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
- 09 May, 2023 1 commit
-
-
Jani Nikula authored
For development and testing purposes, the i915.force_probe module parameter and DRM_I915_FORCE_PROBE kconfig option allow probing of devices that aren't supported by the driver. The i915.force_probe module parameter is "unsafe" and setting it taints the kernel. However, using the kconfig option does not. Always taint the kernel when force probing a device that is not supported. v2: Drop "depends on EXPERT" to avoid build breakage (kernel test robot) Fixes: 7ef5ef5c ("drm/i915: add force_probe module parameter to replace alpha_support") Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
- 08 May, 2023 1 commit
-
-
Stanislav Lisovskiy authored
By my own mistake, after adding !IS_DG2 into wrong branch, bxt_set_cdclk started to execute code intended for platforms gen < 11, which is wrong. Move IS_DG2 check to better place. Fixes: ceb0cc3b ("drm/i915: Communicate display power demands to pcode") Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230506144217.26075-1-stanislav.lisovskiy@intel.com
-
- 05 May, 2023 11 commits
-
-
Ville Syrjälä authored
On g4x the hardware has only one audio/video DIP block. Thus only one HDMI port can transmit audio/infoframes at a time. Currently we pretend that multiple ports can do it at the same time, but that doesn't actually work for two reasons: - the state of the single hw block will get clobbered by the multiple ports, leading to state checker failures - the hardware will automagically disable audio/infoframe transmission when enabled on multiple ports To fix this let's allow only one of the ports to transmit audio/infoframes at a time. We'll just go over all the HDMI ports and pick the first one that is otherwise capable of audio/infoframes. Further HDMI ports will be treated as if they had a DVI sink connected. In order to compute this consistently we'll also need to always add all HDMI ports to the atomic state. Signed-off-by:
Uma Shankar <uma.shankar@intel.com>
-
Ville Syrjälä authored
We'll be wanting to compute has_hdmi_sink a bit differently for some platforms. To that end compute it in the encoder .compute_config_hook() before we call intel_hdmi_compute_config(). intel_hdmi_compute_has_hdmi_sink() will do the basic lifting beyond any platform specific stuff. Signed-off-by:
-
Ankit Nautiyal authored
Check for MODE_H_ILLEGAL before calculating max rates, lanes etc. Move comments about compressed bpp U6.4 format closer to where it is used. Signed-off-by:
-
Ankit Nautiyal authored
Common function to get the sink format for a given mode for DP. Signed-off-by:
-
Ankit Nautiyal authored
Start passing the sink_format, to all functions that take a bool ycbcr420_output as parameter. This will make the functions generic, and will serve as a slight step towards 4:2:2 support later. v2: Rebased. v3: Correct the checks in places concerned with pipe output. (Ville) Other minor styling and refactoring fixes, as suggested by Ville. Suggested-by:
-
Ankit Nautiyal authored
Handle the case with DP to HDMI PCON, where sink_format is set to YCbCr444. In that case PCON is required to be configured to convert from given output_format to YCbCR444. v2: Drop drm_WARN for invalid case, let MISSING_CASE catch it. (Ville) Signed-off-by:
-
Ankit Nautiyal authored
The decision to use DFP output format conversion capabilities should be during compute_config phase. This patch uses the members of intel_dp->dfp to only store the format conversion capabilities of the DP device and uses the crtc_state sink_format member, to program the protocol-converter for colorspace/format conversion. v2: Use sink_format to determine the color conversion config for the pcon (Ville). v3: Fix typo: missing 'break' in switch case (lkp kernel test robot). v4: Add helper to check if DP supports YCBCR420. v5: Simplify logic for computing output_format, based on the given sink_format. (Ville). Added scaler constraint for YCbCr420 output. v6: Split the patch for Scaler constraint for Ycbcr420. v7: Simplify the policy for selecting output_format: Always try for RGB first, followed by YCBCR444, and finally by YCBCR420. v8: Removed redundant comments, minor refactoring. (Ville) v9: Added member for ycbcr420 passthrough cap, fixed minor issues. (Ville) Signed-off-by:
-
Ankit Nautiyal authored
The decision to use DFP output format conversion capabilities should be during compute_config phase. This patch adds new member to crtc_state to represent the final output_format to the sink. In case of a DFP this can be different than the output_format, as per the format conversion done via the PCON. This will help to store only the format conversion capabilities of the DP device in intel_dp->dfp, and use crtc_state to compute and store the configuration for color/format conversion for a given mode. v2: modified the new member to crtc_state to represent the final output_format that eaches the sink, after possible conversion by PCON kind of devices. (Ville) v3: Addressed comments from Ville: -Added comments to clarify difference between sink_format and output_format. -Corrected the order of setting sink_format and output_format. -Added readout for sink_format in get_pipe_config hooks. v4: Set sink_format for intel_sdvo too. (Ville) v5: Rebased. v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville) v7: Fix the condition to set sink_format for HDMI. Set hdmi output_format simply as sink_format. (Ville) Signed-off-by:
-
Nikita Zhandarovich authored
drm_dp_dsc_sink_max_slice_count() may return 0 if something goes wrong on the part of the DSC sink and its DPCD register. This null value may be later used as a divisor in intel_dsc_compute_params(), which will lead to an error. In the unlikely event that this issue occurs, fix it by testing the return value of drm_dp_dsc_sink_max_slice_count() against zero. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: a4a15777 ("drm/i915/dp: Compute DSC pipe config in atomic check") Signed-off-by:
Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by:
-
Stanislav Lisovskiy authored
intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't obtained previously with intel_atomic_get_crtc_state, so we must check it for NULLness here, just as in many other places, where we can't guarantee that intel_atomic_get_crtc_state was called. We are currently getting NULL ptr deref because of that, so this fix was confirmed to help. Fixes: 74a75dc9 ("drm/i915/display: move plane prepare/cleanup to intel_atomic_plane.c") Signed-off-by:
-
Stanislav Lisovskiy authored
Display to communicate display pipe count/CDCLK/voltage configuration to Pcode for more accurate power accounting for DG2. Existing sequence is only sending the voltage value to the Pcode. Adding new sequence with current cdclk associate with voltage value masking. Adding pcode request when any pipe power well will disable or enable. v2: - Make intel_cdclk_need_serialize static to make CI compiler happy. v3: - Removed redundant return(Jani Nikula) - Changed intel_cdclk_power_usage_to_pcode_(pre|post)_notification to be static and also naming to intel_cdclk_pcode_(pre|post)_notify(Jani Nikula) - Changed u8 to be u16 for cdclk parameter in intel_pcode_notify function, as according to BSpec it requires 10 bits(Jani Nikula) - Replaced dev_priv's with i915's(Jani Nikula) - Simplified expression in intel_cdclk_need_serialize(Jani Nikula) - Removed redundant kernel-doc and indentation(Jani Nikula) v4: - Fixed some checkpatch warnings v5: - According to HW team comments that change should affect only DG2, fix correspodent platform check to account this. v6: - Added one more missing IS_DG2 check(Vinod Govindapillai) Signed-off-by:Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230504093959.12085-1-stanislav.lisovskiy@intel.com
-
- 04 May, 2023 6 commits
-
-
Ville Syrjälä authored
Pimp the skl+ scaler register bits with REG_BIT()/etc. Reviewed-by:
-
Ville Syrjälä authored
Define and use the bitmasks for the x/y components of the skl+ scaler window pos/size registers. We stick to the full 16 bits mask here even though the hardware limits are actually lower. The current (ADL) hardware maximums are in fact: 14 bits for X size, 13 bits for X pos, 13 bits for Y size/pos. Yes, that is correct, X pos has less bits than the X size for some reason. But that doesn't actually matter for now as we don't currently even support such wide displays without the use of bigjoiner (due to max plane width limit). v2: Switch back to full 16bit masks since that's what we use transcoder timign regs and PIPESRC as well Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: -
Ville Syrjälä authored
Fix a typo in the PS_COEF_INDEX_AUTO_INC define. Reviewed-by:
-
Ville Syrjälä authored
Rename the scaler binding bits to match the spec more closely. Also call the parameters 'plane_id' to make it a bit more clear what to pass in. v2: Don't break gvt Reviewed-by:
-
Ville Syrjälä authored
We have some duplicated scaler register defines that are never used. Remove them. Reviewed-by:
-
Ville Syrjälä authored
Define and use the bitmasks for the x/y components of the ilk+ panel filter window pos/size registers. Note that we stick to the full 16 bit mask even though the actual hardware limits are lower (and somewhat platform dependent). BDW is actually limited to 13 bits horizontal and 12 bits vertical, with the high bits being hardwired to zero. HSW should have the same limits as BDW. And pre-HSW should be limited to 12bits in both directions as that's already the limit of the transcoder timing registers. Curiously on HSW and earlier platforms all 16 bits can actually be set, but presumably the hardware ignores the high bits. v2: Switch back to full 16bit masks since that's what we use transcoder timign regs and PIPESRC as well Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 02 May, 2023 1 commit
-
-
Arun R Murthy authored
For 128b/132b LT prior to LT DPTX should set power state, DP channel coding and then link rate. v2: added separate function to avoid code duplication(Jani N) v3: DP2.1 section 3.5.2.16 is ordered, 3.5.1.2 is unordered and hence discarding <Ville> Signed-off-by:Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by:
-
- 28 Apr, 2023 4 commits
-
-
Mika Kahola authored
Finally, we can enable TC ports for Meteorlake. Reviewed-by:
Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-14-mika.kahola@intel.com
-
Anusha Srivatsa authored
Unlike previous platforms that used PORT_TX_DFLEXDPSP for max_lane calculation, MTL uses only PORT_TX_DFLEXPA1 from which the max_lanes has to be calculated. Bspec: 50235, 65380 Reviewed-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
Jose Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Imre Deak authored
The HPD live status for MTL has to be read from different set of registers. MTL deserves a new function for this purpose and cannot reuse the existing HPD live status detection Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Mika Kahola authored
Add register writes to enable powering up Type-C subsystem i.e. TCSS. For MeteorLake we need to request TCSS to power up and check the TCSS power state after 500 us. In addition, for PICA we need to set/clear the Type-C PHY ownnership bit when Type-C device is connected/disconnected. Reviewed-by:
-
