- 02 Aug, 2018 9 commits
-
-
Michael Kelley authored
slow_virt_to_phys() is only implemented for arch/x86. Remove its use in arch independent Hyper-V drivers, and replace with test for vmalloc() address followed by appropriate v-to-p function. This follows the typical pattern of other drivers and avoids the need to implement slow_virt_to_phys() for Hyper-V on ARM64. Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dexuan Cui authored
Before setting channel->rescind in vmbus_rescind_cleanup(), we should make sure the channel callback won't run any more, otherwise a high-level driver like pci_hyperv, which may be infinitely waiting for the host VSP's response and notices the channel has been rescinded, can't safely give up: e.g., in hv_pci_protocol_negotiation() -> wait_for_response(), it's unsafe to exit from wait_for_response() and proceed with the on-stack variable "comp_pkt" popped. The issue was originally spotted by Michael Kelley <mikelley@microsoft.com>. In vmbus_close_internal(), the patch also minimizes the range protected by disabling/enabling channel->callback_event: we don't really need that for the whole function. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
-
Alexander Usyskin authored
Define dma ring buffer sizes for PCH12 (CLN HW and newer) Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
Only a firmware with version 2.1 and above supports dma ring feature. Signed-off-by:
-
Tomas Winkler authored
Add dma_ring bit in the mei message header for conveying that the message data itself are on the dma ring. Signed-off-by:
-
Tomas Winkler authored
The protocol defines how to setup an I/O ring on top of host memory to utilize the device DMA engine for faster transport. Three memory buffers are allocated. A Host circular buffer for from the Host to Device communication. A Device circular buffer for from Device to the Host communication. And finally a Control block where the pointers for the both circular buffers are managed. Signed-off-by:
-
Tomas Winkler authored
Remove header size knowledge from me and txe hw layers, this requires to change the write handler to accept header and its length as well as data and its length. HBM messages are fixed to use basic header, hence we add mei_hbm2slots() that converts HBM message length and mei message header, while mei_data2slots() converts data length directly to the slots. Signed-off-by:
-
Xiubo Li authored
The call trace: XXX/1910 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [<ffffffff97008c87>] might_fault+0x57/0xb0 but task is already holding lock: (&idev->info_lock){+.+...}, at: [<ffffffffc0638a06>] uio_write+0x46/0x130 [uio] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&idev->info_lock){+.+...}: [<ffffffff96f31fc9>] lock_acquire+0x99/0x1e0 [<ffffffff975edad3>] mutex_lock_nested+0x93/0x410 [<ffffffffc063873d>] uio_mmap+0x2d/0x170 [uio] [<ffffffff97016b58>] mmap_region+0x428/0x650 [<ffffffff97017138>] do_mmap+0x3b8/0x4e0 [<ffffffff96ffaba3>] vm_mmap_pgoff+0xd3/0x120 [<ffffffff97015261>] SyS_mmap_pgoff+0x1f1/0x270 [<ffffffff96e387c2>] SyS_mmap+0x22/0x30 [<ffffffff975ff315>] system_call_fastpath+0x1c/0x21 -> #0 (&mm->mmap_sem){++++++}: [<ffffffff96f30e9c>] __lock_acquire+0xdac/0x15f0 [<ffffffff96f31fc9>] lock_acquire+0x99/0x1e0 [<ffffffff97008cb4>] might_fault+0x84/0xb0 [<ffffffffc0638a74>] uio_write+0xb4/0x130 [uio] [<ffffffff9706ffa3>] vfs_write+0xc3/0x1f0 [<ffffffff97070e2a>] SyS_write+0x8a/0x100 [<ffffffff975ff315>] system_call_fastpath+0x1c/0x21 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&idev->info_lock); lock(&mm->mmap_sem); lock(&idev->info_lock); lock(&mm->mmap_sem); *** DEADLOCK *** 1 lock held by XXX/1910: #0: (&idev->info_lock){+.+...}, at: [<ffffffffc0638a06>] uio_write+0x46/0x130 [uio] stack backtrace: CPU: 0 PID: 1910 Comm: XXX Kdump: loaded Not tainted #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 Call Trace: [<ffffffff975e9211>] dump_stack+0x19/0x1b [<ffffffff975e260a>] print_circular_bug+0x1f9/0x207 [<ffffffff96f2f6a7>] check_prevs_add+0x957/0x960 [<ffffffff96f30e9c>] __lock_acquire+0xdac/0x15f0 [<ffffffff96f2fb19>] ? mark_held_locks+0xb9/0x140 [<ffffffff96f31fc9>] lock_acquire+0x99/0x1e0 [<ffffffff97008c87>] ? might_fault+0x57/0xb0 [<ffffffff97008cb4>] might_fault+0x84/0xb0 [<ffffffff97008c87>] ? might_fault+0x57/0xb0 [<ffffffffc0638a74>] uio_write+0xb4/0x130 [uio] [<ffffffff9706ffa3>] vfs_write+0xc3/0x1f0 [<ffffffff9709349c>] ? fget_light+0xfc/0x510 [<ffffffff97070e2a>] SyS_write+0x8a/0x100 [<ffffffff975ff315>] system_call_fastpath+0x1c/0x21 Signed-off-by:Xiubo Li <xiubli@redhat.com> Signed-off-by:
-
Dan Carpenter authored
There are two bugs here. First the error codes weren't set on several paths. And second, if the call to request_threaded_irq() inside uio_register_device() fails then it would lead to a double free when we call uio_unregister_device() inside pruss_cleanup(). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 29 Jul, 2018 4 commits
-
-
Stephen Hemminger authored
Being able to find the numa_node for a device is useful for userspace drivers (DPDK) and also for diagnosing performance issues. This makes vmbus similar to pci. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Sunil Muthuswamy authored
Get rid of ISA specific code from vmus_drv.c which is common code. Fixes: 81b18bce ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Signed-off-by:
Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by:
-
Sunil Muthuswamy authored
The check to free the Hyper-V control table header was reversed. This fixes it. Fixes: 81b18bce ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Signed-off-by:
-
Sunil Muthuswamy authored
The code to support panic control message was checking the return was checking the return value from kmsg_dump_get_buffer as error value, which is not what the routine returns. This fixes it. Fixes: 81b18bce ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Signed-off-by:
-
- 27 Jul, 2018 1 commit
-
-
Greg Kroah-Hartman authored
Merge tag 'fsi-updates-2018-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/linux-fsi into char-misc-next Ben writes: Last round of FSI updates for 4.19 This adds a few fixes for things reported since the last merge, and the latch batch of changes pending for FSI for 4.19. That batch is a rather mechanical conversion of the misc devices into proper char devices. The misc devices were ill suited, the minor space for them is limited and we can have a lot of chips in a system creating FSI devices. This also allows us to better control (and fix) object lifetime getting rid of the bad devm_kzalloc() of the structures containing the devices etc... Finally, we add a chardev to the core FSI that provides raw CFAM access to FSI slaves as a replacement for the current "raw" binary sysfs file which will be ultimately deprecated and removed.
-
- 26 Jul, 2018 6 commits
-
-
Benjamin Herrenschmidt authored
The bus scanning process isn't terribly good at parallel attempts at rescanning the same bus. Let's have a per-master mutex protecting the scanning process. Signed-off-by:Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
This aims to deprecate the "raw" sysfs file used for directly accessing the CFAM and instead use a char device like the other sub drivers. Since it reworks the slave creation code and adds a cfam device type, we also use the opportunity to convert the attributes to attribute groups and add a couple more. Signed-off-by: -
Benjamin Herrenschmidt authored
This converts FSI scom to use the new fsi-core controlled chardev allocator and use a real cdev instead of a miscdev. Signed-off-by: -
Benjamin Herrenschmidt authored
This converts FSI sbefifo to use the new fsi-core controlled chardev allocator and use a real cdev instead of a miscdev. One side effect is to fix the object lifetime by removing the use of devm_kzalloc() for something that contains kobjects, and using proper reference counting. Signed-off-by: -
Benjamin Herrenschmidt authored
The various FSI devices (sbefifo, occ, scom, more to come) currently use misc devices. This is problematic as the minor device space for misc is limited and there can be a lot of them. Also it limits our ability to move them to a dedicated /dev/fsi directory or to be smart about device naming and numbering. It also means we have IDAs on every single of these drivers This creates a common fsi "device_type" for the optional /dev/fsi grouping and a dev_t allocator for all FSI devices. "Legacy" devices get to use a backward compatible numbering scheme (as long as chip id <16 and there's only one copy of a given unit type per chip). A single major number and a single IDA are shared for all FSI devices. This doesn't convert the FSI device drivers to use the new scheme yet, they will be converted individually. Signed-off-by: -
Benjamin Herrenschmidt authored
s390 defines a global dump_trace() symbol. Rename ours to dump_ucode_trace() to avoid a collision in build tests. Signed-off-by:
-
- 25 Jul, 2018 9 commits
-
-
Gustavo A. R. Silva authored
In case memory resources for *fw* were allocated, release them before return. Addresses-Coverity-ID: 1472044 ("Resource leak") Fixes: 6a794a27 ("fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Mika Westerberg authored
When Thunderbolt host controller is set to RTD3 mode (Runtime D3) it is present all the time. Because of this it is important to runtime suspend the controller whenever possible. In case of ICM we have following rules which all needs to be true before the host controller can be put to D3: - The controller firmware reports to support RTD3 - All the connected devices announce support for RTD3 - There is no active XDomain connection Implement this using standard Linux runtime PM APIs so that when all the children devices are runtime suspended, the Thunderbolt host controller PCI device is runtime suspended as well. The ICM firmware then starts powering down power domains towards RTD3 but it can prevent this if it detects that there is an active Display Port stream (this is not visible to the software, though). The Thunderbolt host controller will be runtime resumed either when there is a remote wake event (device is connected or disconnected), or when there is access from userspace that requires hardware access. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Colin Ian King authored
Variable 'approved' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'approved' set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Mika Westerberg authored
The correct way to put the ICM into suspend state is to send it NHI_MAILBOX_DRV_UNLOADS mailbox command. NHI_MAILBOX_SAVE_DEVS is not needed on Intel Titan Ridge so we can skip it. Signed-off-by:
-
Mika Westerberg authored
If the connection manager implementation needs to touch the domain structures it ought to take the lock itself. Currently only ICM implements these hooks and it does not need the lock because we there will be no notifications before driver ready message is sent to it. Signed-off-by:
-
Mika Westerberg authored
This command is not really fast and can make resume time slower. We only need to get route again if the link was changed and during initial device connected message. Signed-off-by:
-
Mika Westerberg authored
PCI defaults to 32-bit DMA mask but this device is capable of full 64-bit addressing, so make sure we first try 64-bit DMA mask before falling back to the default 32-bit. Signed-off-by:
-
Nathan Ciobanu authored
Fixes small variable name typo and the associated checkpatch spelling warning. Signed-off-by:
Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
Then reading the RTAG/RCRC "registers" from the coprocessor after a command is complete, mask out the top bits, only keep the relevant bits. Microcode v5 will leave garbage in those top bits as a result of a performance optimization. Signed-off-by:
-
- 24 Jul, 2018 7 commits
-
-
Guenter Roeck authored
If asm/cacheflush.h is included first, the following build warnings are seen with sparc32 builds. In file included from arch/sparc/include/asm/cacheflush.h:11:0, from drivers/android/binder.c:54: arch/sparc/include/asm/cacheflush_32.h:40:37: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration Moving the asm/ include after linux/ includes solves the problem. Suggested-by:Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
If asm/cacheflush.h is included first, the following build warnings are seen with sparc32 builds. In file included from ./arch/sparc/include/asm/cacheflush.h:11:0, from drivers/android/binder_alloc.c:20: ./arch/sparc/include/asm/cacheflush_32.h:40:37: warning: 'struct page' declared inside parameter list Moving the asm/ include after linux/ includes fixes the problem. Suggested-by:
-
Tomas Winkler authored
Wrap the mei header boilerplate initialization code in mei_msg_hdr_init function. On the way remove 'completed' field from mei_cl_cb structure as this information is already included in the header and is local to particular fragment. Signed-off-by:
-
Tomas Winkler authored
The host buffer depth is hardware specific so it's better to handle it inside the me and txe hw modules. In me the depth is read from register in txe it's a constant number. The value is now retrieved via mei_hbuf_depth accessor, while it replaces mei_hbuf_max_len. Signed-off-by:
-
Tomas Winkler authored
Cleanup conversions between slots and data. Define MEI_SLOT_SIZE instead of using 4 or sizeof(u32) across the source code. Signed-off-by:
-
Benjamin Herrenschmidt authored
A couple of places forgot the 'z' qualifier for dev_dbg when printing a size_t Signed-off-by: -
Greg Kroah-Hartman authored
Merge tag 'fsi-updates-2018-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/linux-fsi into char-misc-testing Ben writes: This adds support for offloading the FSI low level bitbanging to the ColdFire coprocessor of the Aspeed SoCs. All the pre-requisites have already been merged, this is the final piece in the puzzle. This branch also pull gpio/ib-aspeed which is a topic branch already in gpio/for-next (and thus in next) whic contains pre-requisites. Finally, there's also a bug fix to the sbefifo driver for some inconsistent use of a mutex in the error handling code.
-
- 23 Jul, 2018 4 commits
-
-
Benjamin Herrenschmidt authored
They get retrieved from the device-tree and exposed as an attribute in sysfs Signed-off-by: -
Benjamin Herrenschmidt authored
This represents a physical chip in the system and allows a stable numbering scheme to be passed to udev for userspace to recognize which chip is which. Signed-off-by:
Rob Herring <robh@kernel.org>
-
Benjamin Herrenschmidt authored
Some of the exit path missed the unlock. Move the mutex to an outer function to avoid the problem completely Signed-off-by: -
Benjamin Herrenschmidt authored
The Aspeed AST2x00 can contain a ColdFire v1 coprocessor which is currently unused on OpenPower systems. This adds an alternative to the fsi-master-gpio driver that uses that coprocessor instead of bit banging from the ARM core itself. The end result is about 4 times faster. The firmware for the coprocessor and its source code can be found at https://github.com/ozbenh/cf-fsi and is system specific. Signed-off-by:
-
