Pull s390 fixes from Martin Schwidefsky

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  [S390] memory hotplug: prevent memory zone interleave
  [S390] crash_dump: remove duplicate include
  [S390] KEYS: Enable the compat keyctl wrapper on s390x

Merge virtio pull request from Rusty Russell.

* tag 'for-linus' of git://github.com/rustyrussell/linux:
  virtio: balloon: leak / fill balloon across S4

commit e562966d added support for S4 to
the balloon driver.  The freeze function did nothing to free the pages,
since reclaiming the pages from the host to immediately give them back
(if S4 was successful) seemed wasteful.  Also, if S4 wasn't successful,
the guest would have to re-fill the balloon.  On restore, the pages were
supposed to be marked freed and the free page counters were incremented
to reflect the balloon was totally deflated.

However, this wasn't done right.  The pages that were earlier taken away
from the guest during a balloon inflation operation were just shown as
used pages after a successful restore from S4.  Just a fancy way of
leaking lots of memory.

Instead of trying that, just leak the balloon on freeze and fill it on
restore/thaw paths.  This works properly now.  The optimisation to not
leak can be added later on after a bit of refactoring of the code.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Arnd Bergmann says:
 "Another set of arm-soc bug fixes on top of v3.3-rc5.  The few larger
  bits are all for devices that still need to get set up in board code.

  Only three platforms are in this set of fixes: omap2+, pxa and lpc32xx."

* tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
  ARM: LPC32xx: serial.c: Fixed loop limit
  ARM: LPC32xx: serial.c: HW bug workaround
  ARM: LPC32xx: irq.c: Clear latched event
  ARM: LPC32xx: Fix interrupt controller init
  ARM: LPC32xx: Fix irq on GPI_28
  ARM: OMAP2: fix mailbox init code
  ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators
  ARM: OMAP1: Fix out-of-bounds array access for Innovator
  OMAP3 EVM: remove out-of-bounds array access of gpio_leds
  ARM: OMAP: Fix build error when mmc_omap is built as module
  ARM: OMAP: Fix kernel panic with HSMMC when twl4030_gpio is a module
  pxa/hx4700: add platform device and I2C info for AK4641 codec
  arch/arm/mach-pxa/: included linux/gpio.h twice
  arch/arm/mach-mmp/: some files include some headers twice
  ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe
  ARM: pxa: fix including linux/gpio.h twice
  ARM: pxa: fix mixed declarations and code in sharpsl_pm
  ARM: pxa: fix wrong parsing gpio event on spitz
  ARM: OMAP2+: usb-host: fix compile warning
  ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback
  ...

Build fixes for 3.3 from Jonas Bonn

* tag 'for-3.3' of git://openrisc.net/jonas/linux:
  openrisc: Fix up audit_syscall_[entry|exit]() usage
  openrisc: include export.h for EXPORT_SYMBOL

Fix printk format warning (from Linus's suggestion):

on i386:
  fs/ecryptfs/miscdev.c:433:38: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int'

and on x86_64:
  fs/ecryptfs/miscdev.c:433:38: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'long unsigned int'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc:	Geert Uytterhoeven <geert@linux-m68k.org>
Cc:	Tyler Hicks <tyhicks@canonical.com>
Cc:	Dustin Kirkland <dustin.kirkland@gazzang.com>
Cc:	ecryptfs@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Read resource groups on mount
  GFS2: Ensure rindex is uptodate for fallocate
  GFS2: Read in rindex if necessary during unlink
  GFS2: Fix race between lru_list and glock ref count

IOMMU fixes for Linux 3.3-rc5

All the fixes are for the OMAP IOMMU driver. The first patch is the
biggest one. It fixes the calls of the function omap_find_iovm_area() in
the omap-iommu-debug module which expects a 'struct device' parameter
since commit fabdbca8 instead of an omap_iommu handle. The
omap-iommu-debug code still passed the handle to the function which
caused a crash.

The second patch fixes a NULL pointer dereference in the OMAP code and
the third patch makes sure that the omap-iommu is initialized before the
omap-isp driver, which relies on the iommu. The last patch is only a
workaround until defered probing is implemented.

* tag 'iommu-fixes-v3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
  iommu/omap: fix NULL pointer dereference
  iommu/omap: fix erroneous omap-iommu-debug API calls

This makes mount take slightly longer, but at the same time, the first
write to the filesystem will be faster too. It also means that if there
is a problem in the resource index, then we can refuse to mount rather
than having to try and report that when the first write occurs.

In addition, to avoid recursive locking, we hvae to take account of
instances when the rindex glock may already be held when we are
trying to update the rbtree of resource groups.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This patch fixes a problem whereby gfs2_grow was failing and causing GFS2
to assert. The problem was that when GFS2's fallocate operation tried to
acquire an "allocation" it made sure the rindex was up to date, and if not,
it called gfs2_rindex_update. However, if the file being fallocated was
the rindex itself, it was already locked at that point. By calling
gfs2_rindex_update at an earlier point in time, we bring rindex up to date
and thereby avoid trying to lock it when the "allocation" is acquired.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This patch fixes a problem whereby you were unable to delete
files until other file system operations were done (such as
statfs, touch, writes, etc.) that caused the rindex to be
read in.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This patch fixes a narrow race window between the glock ref count
hitting zero and glocks being removed from the lru_list.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Merge tag 'ktest-fix-make-min-failed-build-for-real' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

While demoing ktest at ELC in 2012, it was embarrassing that the
make_min_config test failed to work because the snowball board I was
testing it against had a config that would not build.  But the
make_min_config only tested the testing part and ignored build failures.
The end result was a config file that would not boot.

This time, for real.

* tag 'ktest-fix-make-min-failed-build-for-real' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix make_min_config test when build fails

The make_min_config does not take into account when the build fails,
resulting in a invalid MIN_CONFIG .config file. When the build fails,
it is ignored and the boot test is executed, using the previous built
kernel. The configs that should be tested are not tested and they may
be added or removed depending on the result of the last kernel that
succeeded to be built.

If the build fails, mark the current config as a failure and the
configs that were disabled may still be needed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

* 'lpc32xx/fixes' of git://git.antcom.de/linux-2.6: (5 commits)
  ARM: LPC32xx: serial.c: Fixed loop limit
  ARM: LPC32xx: serial.c: HW bug workaround
  ARM: LPC32xx: irq.c: Clear latched event
  ARM: LPC32xx: Fix interrupt controller init
  ARM: LPC32xx: Fix irq on GPI_28

Update to Linux 3.3-rc5
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch fixes a wrong loop limit on UART init.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org

This patch fixes a HW bug by flushing RX FIFOs of the UARTs on init. It was
ported from NXP's git.lpclinux.com tree.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org

This patch fixes the wakeup disable function by clearing latched events.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org

This patch fixes the initialization of the interrupt controller of the LPC32xx
by correctly setting up SIC1 and SIC2 instead of (wrongly) using the same value
as for the Main Interrupt Controller (MIC).
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org

The GPI_28 IRQ was not registered properly. The registration of
IRQ_LPC32XX_GPI_28 was added and the (wrong) IRQ_LPC32XX_GPI_11 at
LPC32XX_SIC1_IRQ(4) was replaced by IRQ_LPC32XX_GPI_28 (see manual of
LPC32xx / interrupt controller).
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org

Here are some trivial NTFS changes (a spelling fix and two use before
NULL check cases found by Coverity as well as an update in MAINTAINERS
for the path to the ntfs git repo) together with a simple LDM fix for
parsing fragmented VBLKs.

* git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs:
  NTFS: Update git repo path in MAINTAINERS file.
  LDM: Fix reassembly of extended VBLKs.
  NTFS: Correct two spelling errors "dealocate" to "deallocate" in mft.c.
  NTFS: Do not dereference pointer before checking for NULL.
  NTFS: Remove unused variable.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce/AMD: Fix UP build error
  x86: Specify a size for the cmp in the NMI handler
  x86/nmi: Test saved %cs in NMI to determine nested NMI case
  x86/amd: Fix L1i and L2 cache sharing information for AMD family 15h processors
  x86/microcode: Remove noisy AMD microcode warning

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/events: Revert trace_sched_stat_sleeptime()

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Handle pending irqs in irq_startup()
  genirq: Unmask oneshot irqs when thread was not woken

The new is_compat_task() define for the !COMPAT case in
include/linux/compat.h conflicts with a similar define in
arch/s390/include/asm/compat.h.

This is the minimal patch which fixes the build issues.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap3isp depends on omap's iommu and will fail to probe if
initialized before it (which always happen if they are builtin).

Make omap's iommu subsys_initcall as an interim solution until
the probe deferral mechanism is merged.
Reported-by: James <angweiyang@gmail.com>
Debugged-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: stable <stable@vger.kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Signed-off-by: Anton Altaparmakov <anton@tuxera.com>

Merge tag 'stable/for-linus-fixes-3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Two fixes to fix a memory corruption bug when WC pages never get
converted back to WB but end up being recycled in the general memory
pool as WC.

There is a better way of fixing this, but there is not enough time to do
the full benchmarking to pick one of the right options - so picking the
one that favors stability for right now.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* tag 'stable/for-linus-fixes-3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pat: Disable PAT support for now.
  xen/setup: Remove redundant filtering of PTE masks.

* tag 'for-linus' of git://github.com/rustyrussell/linux:
  mod/file2alias: make modpost compile on darwin again

The autofs mailing list has moved to vger.kernel.org.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit e49ce141 breaks cross compiling
the linux kernel on darwin hosts.
This fix introduce some minimal glue to adopt linker section handling
for darwin hosts.
Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Jochen Friedrich <jochen@scram.de>
CC: Samuel Ortiz <sameo@linux.intel.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Bernhard Walle <bernhard@bwalle.de>

1) ICMP sockets leave err uninitialized but we try to return it for the
   unsupported MSG_OOB case, reported by Dave Jones.

2) Add new Zaurus device ID entries, from Dave Jones.

3) Pointer calculation in hso driver memset is wrong, from Dan
   Carpenter.

4) ks8851_probe() checks unsigned value as negative, fix also from Dan
   Carpenter.

5) Fix crashes in atl1c driver due to TX queue handling, from Eric
   Dumazet.  I anticipate some TX side locking fixes coming in the near
   future for this driver as well.

6) The inline directive fix in Bluetooth which was breaking the build
   only with very new versions of GCC, from Johan Hedberg.

7) Fix crashes in the ATP CLIP code due to ARP cleanups this merge
   window, reported by Meelis Roos and fixed by Eric Dumazet.

8) JME driver doesn't flush RX FIFO correctly, from Guo-Fu Tseng.

9) Some ip6_route_output() callers test the return value for NULL, but
   this never happens as the convention is to return a dst entry with
   dst->error set.  Fixes from RonQing Li.

10) Logitech Harmony 900 should be handled by zaurus driver not
   cdc_ether, update white lists and black lists accordingly.  From
   Scott Talbert.

11) Receiving from certain kinds of devices there won't be a MAC header,
   so there is no MAC header to fixup in the IPSEC code, and if we try
   to do it we'll crash.  Fix from Eric Dumazet.

12) Port type array indexing off-by-one in mlx4 driver, fix from Yevgeny
   Petrilin.

13) Fix regression in link-down handling in davinci_emac which causes
   all RX descriptors to be freed up and therefore RX to wedge
   completely, from Christian Riesch.

14) It took two attempts, but ctnetlink soft lockups seem to be
   cured now, from Pablo Neira Ayuso.

15) Endianness bug fix in ENIC driver, from Santosh Nayak.

16) The long ago conversion of the PPP fragmentation code over to
   abstracted SKB list handling wasn't perfect, once we get an
   out of sequence SKB we don't flush the rest of them like we
   should.  From Ben McKeegan.

17) Fix regression of ->ip_summed initialization in sfc driver.
   From Ben Hutchings.

18) Bluetooth timeout mistakenly using msecs instead of jiffies,
   from Andrzej Kaczmarek.

19) Using _sync variant of work cancellation results in deadlocks,
   use the non _sync variants instead.  From Andre Guedes.

20) Bluetooth rfcomm code had reference counting problems leading
   to crashes, fix from Octavian Purdila.

21) The conversion of netem over to classful qdisc handling added
   two bugs to netem_dequeue(), fixes from Eric Dumazet.

22) Missing pci_iounmap() in ATM Solos driver.  Fix from Julia Lawall.

23) b44_pci_exit() should not have __exit tag since it's invoked from
   non-__exit code.  From Nikola Pajkovsky.

24) The conversion of the neighbour hash tables over to RCU added a
   race, fixed here by adding the necessary reread of tbl->nht, fix
   from Michel Machado.

25) When we added VF (virtual function) attributes for network device
   dumps, this potentially bloats up the size of the dump of one
   network device such that the dump size is too large for the buffer
   allocated by properly written netlink applications.

   In particular, if you add 255 VFs to a network device, parts of
   GLIBC stop working.

   To fix this, we add an attribute that is used to turn on these
   extended portions of the network device dump.  Sophisticaed
   applications like 'ip' that want to see this stuff  will be changed
   to set the attribute, whereas things like GLIBC that don't care
   about VFs simply will not, and therefore won't be busted by the
   mere presence of VFs on a network device.

   Thanks to the tireless work of Greg Rose on this fix.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
  sfc: Fix assignment of ip_summed for pre-allocated skbs
  ppp: fix 'ppp_mp_reconstruct bad seq' errors
  enic: Fix endianness bug.
  gre: fix spelling in comments
  netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2)
  Revert "netfilter: ctnetlink: fix soft lockup when netlink adds new entries"
  davinci_emac: Do not free all rx dma descriptors during init
  mlx4_core: Fixing array indexes when setting port types
  phy: IC+101G and PHY_HAS_INTERRUPT flag
  netdev/phy/icplus: Correct broken phy_init code
  ipsec: be careful of non existing mac headers
  Move Logitech Harmony 900 from cdc_ether to zaurus
  hso: memsetting wrong data in hso_get_count()
  netfilter: ip6_route_output() never returns NULL.
  ethernet/broadcom: ip6_route_output() never returns NULL.
  ipv6: ip6_route_output() never returns NULL.
  jme: Fix FIFO flush issue
  atm: clip: remove clip_tbl
  ipv4: ping: Fix recvmsg MSG_OOB error handling.
  rtnetlink: Fix problem with buffer allocation
  ...

The autofs compat handling fix caused a compile failure when
CONFIG_COMPAT isn't defined.

Instead of adding random #ifdef'fery in autofs, let's just make the
compat helpers earlier to use: without CONFIG_COMPAT, is_compat_task()
just hardcodes to zero.

We could probably do something similar for a number of other cases where
we have #ifdef's in code, but this is the low-hanging fruit.
Reported-and-tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Couple of minor driver fixes.

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (max34440) Fix resetting temperature history
  hwmon: (f75375s) Fix register write order when setting fans to full speed
  hwmon: (ads1015) Fix file leak in probe function
  hwmon: (max6639) Fix PPR register initialization to set both channels
  hwmon: (max6639) Fix FAN_FROM_REG calculation

three kbuild fixes for 3.3:
 - make deb-pkg symlink race fix.
 - make coccicheck fix.
 - Dropping the check for modutils.  This is not a regression, but
   allows the module-init-tools replacement kmod work with the 3.3
   kernel.

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  coccicheck: change handling of C={1,2} when M= is set
  builddeb: Don't create files in /tmp with predictable names
  kbuild: do not check for ancient modutils tools

When the autofs protocol version 5 packet type was added in commit
5c0a32fc ("autofs4: add new packet type for v5 communications"), it
obvously tried quite hard to be word-size agnostic, and uses explicitly
sized fields that are all correctly aligned.

However, with the final "char name[NAME_MAX+1]" array at the end, the
actual size of the structure ends up being not very well defined:
because the struct isn't marked 'packed', doing a "sizeof()" on it will
align the size of the struct up to the biggest alignment of the members
it has.

And despite all the members being the same, the alignment of them is
different: a "__u64" has 4-byte alignment on x86-32, but native 8-byte
alignment on x86-64.  And while 'NAME_MAX+1' ends up being a nice round
number (256), the name[] array starts out a 4-byte aligned.

End result: the "packed" size of the structure is 300 bytes: 4-byte, but
not 8-byte aligned.

As a result, despite all the fields being in the same place on all
architectures, sizeof() will round up that size to 304 bytes on
architectures that have 8-byte alignment for u64.

Note that this is *not* a problem for 32-bit compat mode on POWER, since
there __u64 is 8-byte aligned even in 32-bit mode.  But on x86, 32-bit
and 64-bit alignment is different for 64-bit entities, and as a result
the structure that has exactly the same layout has different sizes.

So on x86-64, but no other architecture, we will just subtract 4 from
the size of the structure when running in a compat task.  That way we
will write the properly sized packet that user mode expects.

Not pretty.  Sadly, this very subtle, and unnecessary, size difference
has been encoded in user space that wants to read packets of *exactly*
the right size, and will refuse to touch anything else.
Reported-and-tested-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

One InfiniBand/RDMA regression fix for 3.3:

 - mlx4 SR-IOV changes added static exported functions, which doesn't
   build on powerpc at least.  Fix from Doug Ledford for this.

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  mlx4_core: Exported functions can't be static