Alexander Couzens says:

====================
net: mt7531: pll & reset fixes
====================

Link: https://lore.kernel.org/r/20220917000734.520253-1-lynxis@fe80.euSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The datasheet [1] explicit describes it as requirement for a reset.

[1] MT7531 Reference Manual for Development Board rev 1.0, page 735
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move the PLL init of the switch out of the pad configuration of the port
6 (usally cpu port).

Fix a unidirectional 100 mbit limitation on 1 gbit or 2.5 gbit links for
outbound traffic on port 5 or port 6.

Fixes: c288575f ("net: dsa: mt7530: Add the support of MT7531 switch")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit bbb774d9 ("net: Add tests for bonding and team address list
management") adds the net team driver tests in the directory:

  tools/testing/selftests/drivers/net/team/

The file entry in MAINTAINERS for the TEAM DRIVER however refers to:

  tools/testing/selftests/net/team/

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken file pattern.

Repair this file entry in TEAM DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20220922114053.10883-1-lukas.bulwahn@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When GEM is in SGMII mode and disabled as a wakeup source, the power
management controller can power down the entire full power domain(FPD)
if none of the FPD devices are in use.

Incase of FPD off, there are below ethernet link up issues on non-wakeup
suspend/resume. To fix it add phy_exit() in suspend and phy_init() in the
resume path which reinitializes PS GTR SGMII lanes.

$ echo +20 > /sys/class/rtc/rtc0/wakealarm
$ echo mem > /sys/power/state

After resume:

$ ifconfig eth0 up
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
phy phy-fd400000.phy.0: phy poweron failed --> -110
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
SIOCSIFFLAGS: Connection timed out
phy phy-fd400000.phy.0: phy poweron failed --> -110

Fixes: 8b73fa3a ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change adds support for not enabling carrier during TUNSETIFF
interface creation by specifying the IFF_NO_CARRIER flag.

Our tests make heavy use of tun interfaces. In some scenarios, the test
process creates the interface but another process brings it up after the
interface is discovered via netlink notification. In that case, it is
not possible to create a tun/tap interface with carrier off without it
racing against the bring up. Immediately setting carrier off via
TUNSETCARRIER is still too late.
Signed-off-by: Patrick Rohr <prohr@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wifi, netfilter and can.

  A handful of awaited fixes here - revert of the FEC changes, bluetooth
  fix, fixes for iwlwifi spew.

  We added a warning in PHY/MDIO code which is triggering on a couple of
  platforms in a false-positive-ish way. If we can't iron that out over
  the week we'll drop it and re-add for 6.1.

  I've added a new "follow up fixes" section for fixes to fixes in
  6.0-rcs but it may actually give the false impression that those are
  problematic or that more testing time would have caught them. So
  likely a one time thing.

  Follow up fixes:

   - nf_tables_addchain: fix nft_counters_enabled underflow

   - ebtables: fix memory leak when blob is malformed

   - nf_ct_ftp: fix deadlock when nat rewrite is needed

  Current release - regressions:

   - Revert "fec: Restart PPS after link state change" and the related
     "net: fec: Use a spinlock to guard `fep->ptp_clk_on`"

   - Bluetooth: fix HCIGETDEVINFO regression

   - wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2

   - mptcp: fix fwd memory accounting on coalesce

   - rwlock removal fall out:
      - ipmr: always call ip{,6}_mr_forward() from RCU read-side
        critical section
      - ipv6: fix crash when IPv6 is administratively disabled

   - tcp: read multiple skbs in tcp_read_skb()

   - mdio_bus_phy_resume state warning fallout:
      - eth: ravb: fix PHY state warning splat during system resume
      - eth: sh_eth: fix PHY state warning splat during system resume

  Current release - new code bugs:

   - wifi: iwlwifi: don't spam logs with NSS>2 messages

   - eth: mtk_eth_soc: enable XDP support just for MT7986 SoC

  Previous releases - regressions:

   - bonding: fix NULL deref in bond_rr_gen_slave_id

   - wifi: iwlwifi: mark IWLMEI as broken

  Previous releases - always broken:

   - nf_conntrack helpers:
      - irc: tighten matching on DCC message
      - sip: fix ct_sip_walk_headers
      - osf: fix possible bogus match in nf_osf_find()

   - ipvlan: fix out-of-bound bugs caused by unset skb->mac_header

   - core: fix flow symmetric hash

   - bonding, team: unsync device addresses on ndo_stop

   - phy: micrel: fix shared interrupt on LAN8814"

* tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
  selftests: forwarding: add shebang for sch_red.sh
  bnxt: prevent skb UAF after handing over to PTP worker
  net: marvell: Fix refcounting bugs in prestera_port_sfp_bind()
  net: sched: fix possible refcount leak in tc_new_tfilter()
  net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD
  udp: Use WARN_ON_ONCE() in udp_read_skb()
  selftests: bonding: cause oops in bond_rr_gen_slave_id
  bonding: fix NULL deref in bond_rr_gen_slave_id
  net: phy: micrel: fix shared interrupt on LAN8814
  net/smc: Stop the CLC flow if no link to map buffers on
  ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficient
  net: atlantic: fix potential memory leak in aq_ndev_close()
  can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
  can: gs_usb: gs_can_open(): fix race dev->can.state condition
  can: flexcan: flexcan_mailbox_read() fix return value for drop = true
  net: sh_eth: Fix PHY state warning splat during system resume
  net: ravb: Fix PHY state warning splat during system resume
  netfilter: nf_ct_ftp: fix deadlock when nat rewrite is needed
  netfilter: ebtables: fix memory leak when blob is malformed
  netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain()
  ...

Pull EFI fixes from Ard Biesheuvel:

 - Use the right variable to check for shim insecure mode

 - Wipe setup_data field when booting via EFI

 - Add missing error check to efibc driver

* tag 'efi-urgent-for-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: libstub: check Shim mode using MokSBStateRT
  efi: x86: Wipe setup_data on pure EFI boot
  efi: efibc: Guard against allocation failure

Pull gpio fixes from Bartosz Golaszewski:

 - fix a NULL-pointer dereference at driver unbind and a potential
   resource leak in error path in gpio-mockup

 - make the irqchip immutable in gpio-ftgpio010

 - fix dereferencing a potentially uninitialized variable in gpio-tqmx86

 - fix interrupt registering in gpiolib's character device code

* tag 'gpio-fixes-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: cdev: Set lineevent_state::irq after IRQ register successfully
  gpio: tqmx86: fix uninitialized variable girq
  gpio: ftgpio010: Make irqchip immutable
  gpio: mockup: Fix potential resource leakage when register a chip
  gpio: mockup: fix NULL pointer dereference when removing debugfs

Merge tag 'perf-tools-fixes-for-v6.0-2022-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix polling of system-wide events related to mixing per-cpu and
   per-thread events.

 - Do not check if /proc/modules is unchanged when copying /proc/kcore,
   that doesn't get in the way of post processing analysis.

 - Include program header in ELF files generated for JIT files, so that
   they can be opened by tools using elfutils libraries.

 - Enter namespaces when synthesizing build-ids.

 - Fix some bugs related to a recent cpu_map overhaul where we should be
   using an index and not the cpu number.

 - Fix BPF program ELF section name, using the naming expected by libbpf
   when using BPF counters in 'perf stat'.

 - Add a new test for perf stat cgroup BPF counter.

 - Adjust check on 'perf test wp' for older kernels, where the
   PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl isn't supported.

 - Sync x86 cpufeatures with the kernel sources, no changes in tooling.

* tag 'perf-tools-fixes-for-v6.0-2022-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Honor namespace when synthesizing build-ids
  tools headers cpufeatures: Sync with the kernel sources
  perf kcore_copy: Do not check /proc/modules is unchanged
  libperf evlist: Fix polling of system-wide events
  perf record: Fix cpu mask bit setting for mixed mmaps
  perf test: Skip wp modify test on old kernels
  perf jit: Include program header in ELF files
  perf test: Add a new test for perf stat cgroup BPF counter
  perf stat: Use evsel->core.cpus to iterate cpus in BPF cgroup counters
  perf stat: Fix cpu map index in bperf cgroup code
  perf stat: Fix BPF program section name

RHEL/Fedora RPM build checks are stricter, and complain when executable
files don't have a shebang line, e.g.

*** WARNING: ./kselftests/net/forwarding/sch_red.sh is executable but has no shebang, removing executable bit

Fix it by adding shebang line.

Fixes: 6cf0291f ("selftests: forwarding: Add a RED test for SW datapath")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220922024453.437757-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When reading the timestamp is required bnxt_tx_int() hands
over the ownership of the completed skb to the PTP worker.
The skb should not be used afterwards, as the worker may
run before the rest of our code and free the skb, leading
to a use-after-free.

Since dev_kfree_skb_any() accepts NULL make the loss of
ownership more obvious and set skb to NULL.

Fixes: 83bb623c ("bnxt_en: Transmit and retrieve packet timestamps")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20220921201005.335390-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In prestera_port_sfp_bind(), there are two refcounting bugs:
(1) we should call of_node_get() before of_find_node_by_name() as
it will automaitcally decrease the refcount of 'from' argument;
(2) we should call of_node_put() for the break of the iteration
for_each_child_of_node() as it will automatically increase and
decrease the 'child'.

Fixes: 52323ef7 ("net: marvell: prestera: add phylink support")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20220921133245.4111672-1-windhl@126.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tfilter_put need to be called to put the refount got by tp->ops->get to
avoid possible refcount leak when chain->tmplt_ops != NULL and
chain->tmplt_ops != tp->ops.

Fixes: 7d5509fa ("net: sched: extend proto ops with 'put' callback")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20220921092734.31700-1-hbh25y@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a separate receive path for small packets (under 256 bytes).
Instead of allocating a new dma-capable skb to be used for the next packet,
this path allocates a skb and copies the data into it (reusing the existing
sbk for the next packet). There are two bytes of junk data at the beginning
of every packet. I believe these are inserted in order to allow aligned DMA
and IP headers. We skip over them using skb_reserve. Before copying over
the data, we must use a barrier to ensure we see the whole packet. The
current code only synchronizes len bytes, starting from the beginning of
the packet, including the junk bytes. However, this leaves off the final
two bytes in the packet. Synchronize the whole packet.

To reproduce this problem, ping a HME with a payload size between 17 and
214

	$ ping -s 17 <hme_address>

which will complain rather loudly about the data mismatch. Small packets
(below 60 bytes on the wire) do not have this issue. I suspect this is
related to the padding added to increase the minimum packet size.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Prevent udp_read_skb() from flooding the syslog.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/20220921005915.2697-1-yepeilin.cs@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jonathan Toppins says:

====================
bonding: fix NULL deref in bond_rr_gen_slave_id

Fix a NULL dereference of the struct bonding.rr_tx_counter member because
if a bond is initially created with an initial mode != zero (Round Robin)
the memory required for the counter is never created and when the mode is
changed there is never any attempt to verify the memory is allocated upon
switching modes.
====================

Link: https://lore.kernel.org/r/cover.1663694476.git.jtoppins@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This bonding selftest used to cause a kernel oops on aarch64
and should be architectures agnostic.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix a NULL dereference of the struct bonding.rr_tx_counter member because
if a bond is initially created with an initial mode != zero (Round Robin)
the memory required for the counter is never created and when the mode is
changed there is never any attempt to verify the memory is allocated upon
switching modes.

This causes the following Oops on an aarch64 machine:
    [  334.686773] Unable to handle kernel paging request at virtual address ffff2c91ac905000
    [  334.694703] Mem abort info:
    [  334.697486]   ESR = 0x0000000096000004
    [  334.701234]   EC = 0x25: DABT (current EL), IL = 32 bits
    [  334.706536]   SET = 0, FnV = 0
    [  334.709579]   EA = 0, S1PTW = 0
    [  334.712719]   FSC = 0x04: level 0 translation fault
    [  334.717586] Data abort info:
    [  334.720454]   ISV = 0, ISS = 0x00000004
    [  334.724288]   CM = 0, WnR = 0
    [  334.727244] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000008044d662000
    [  334.733944] [ffff2c91ac905000] pgd=0000000000000000, p4d=0000000000000000
    [  334.740734] Internal error: Oops: 96000004 [#1] SMP
    [  334.745602] Modules linked in: bonding tls veth rfkill sunrpc arm_spe_pmu vfat fat acpi_ipmi ipmi_ssif ixgbe igb i40e mdio ipmi_devintf ipmi_msghandler arm_cmn arm_dsu_pmu cppc_cpufreq acpi_tad fuse zram crct10dif_ce ast ghash_ce sbsa_gwdt nvme drm_vram_helper drm_ttm_helper nvme_core ttm xgene_hwmon
    [  334.772217] CPU: 7 PID: 2214 Comm: ping Not tainted 6.0.0-rc4-00133-g64ae13ed #4
    [  334.779950] Hardware name: GIGABYTE R272-P31-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021
    [  334.789244] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    [  334.796196] pc : bond_rr_gen_slave_id+0x40/0x124 [bonding]
    [  334.801691] lr : bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding]
    [  334.807962] sp : ffff8000221733e0
    [  334.811265] x29: ffff8000221733e0 x28: ffffdbac8572d198 x27: ffff80002217357c
    [  334.818392] x26: 000000000000002a x25: ffffdbacb33ee000 x24: ffff07ff980fa000
    [  334.825519] x23: ffffdbacb2e398ba x22: ffff07ff98102000 x21: ffff07ff981029c0
    [  334.832646] x20: 0000000000000001 x19: ffff07ff981029c0 x18: 0000000000000014
    [  334.839773] x17: 0000000000000000 x16: ffffdbacb1004364 x15: 0000aaaabe2f5a62
    [  334.846899] x14: ffff07ff8e55d968 x13: ffff07ff8e55db30 x12: 0000000000000000
    [  334.854026] x11: ffffdbacb21532e8 x10: 0000000000000001 x9 : ffffdbac857178ec
    [  334.861153] x8 : ffff07ff9f6e5a28 x7 : 0000000000000000 x6 : 000000007c2b3742
    [  334.868279] x5 : ffff2c91ac905000 x4 : ffff2c91ac905000 x3 : ffff07ff9f554400
    [  334.875406] x2 : ffff2c91ac905000 x1 : 0000000000000001 x0 : ffff07ff981029c0
    [  334.882532] Call trace:
    [  334.884967]  bond_rr_gen_slave_id+0x40/0x124 [bonding]
    [  334.890109]  bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding]
    [  334.896033]  __bond_start_xmit+0x128/0x3a0 [bonding]
    [  334.901001]  bond_start_xmit+0x54/0xb0 [bonding]
    [  334.905622]  dev_hard_start_xmit+0xb4/0x220
    [  334.909798]  __dev_queue_xmit+0x1a0/0x720
    [  334.913799]  arp_xmit+0x3c/0xbc
    [  334.916932]  arp_send_dst+0x98/0xd0
    [  334.920410]  arp_solicit+0xe8/0x230
    [  334.923888]  neigh_probe+0x60/0xb0
    [  334.927279]  __neigh_event_send+0x3b0/0x470
    [  334.931453]  neigh_resolve_output+0x70/0x90
    [  334.935626]  ip_finish_output2+0x158/0x514
    [  334.939714]  __ip_finish_output+0xac/0x1a4
    [  334.943800]  ip_finish_output+0x40/0xfc
    [  334.947626]  ip_output+0xf8/0x1a4
    [  334.950931]  ip_send_skb+0x5c/0x100
    [  334.954410]  ip_push_pending_frames+0x3c/0x60
    [  334.958758]  raw_sendmsg+0x458/0x6d0
    [  334.962325]  inet_sendmsg+0x50/0x80
    [  334.965805]  sock_sendmsg+0x60/0x6c
    [  334.969286]  __sys_sendto+0xc8/0x134
    [  334.972853]  __arm64_sys_sendto+0x34/0x4c
    [  334.976854]  invoke_syscall+0x78/0x100
    [  334.980594]  el0_svc_common.constprop.0+0x4c/0xf4
    [  334.985287]  do_el0_svc+0x38/0x4c
    [  334.988591]  el0_svc+0x34/0x10c
    [  334.991724]  el0t_64_sync_handler+0x11c/0x150
    [  334.996072]  el0t_64_sync+0x190/0x194
    [  334.999726] Code: b9001062 f9403c02 d53cd044 8b040042 (b8210040)
    [  335.005810] ---[ end trace 0000000000000000 ]---
    [  335.010416] Kernel panic - not syncing: Oops: Fatal exception in interrupt
    [  335.017279] SMP: stopping secondary CPUs
    [  335.021374] Kernel Offset: 0x5baca8eb0000 from 0xffff800008000000
    [  335.027456] PHYS_OFFSET: 0x80000000
    [  335.030932] CPU features: 0x0000,0085c029,19805c82
    [  335.035713] Memory Limit: none
    [  335.038756] Rebooting in 180 seconds..

The fix is to allocate the memory in bond_open() which is guaranteed
to be called before any packets are processed.

Fixes: 848ca918 ("net: bonding: Use per-cpu rr_tx_counter")
CC: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit ece19502 ("net: phy: micrel: 1588 support for LAN8814
phy") the handler always returns IRQ_HANDLED, except in an error case.
Before that commit, the interrupt status register was checked and if
it was empty, IRQ_NONE was returned. Restore that behavior to play nice
with the interrupt line being shared with others.

Fixes: ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Divya Koppera <Divya.Koppera@microchip.com>
Link: https://lore.kernel.org/r/20220920141619.808117-1-michael@walle.ccSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There might be a potential race between SMC-R buffer map and
link group termination.

smc_smcr_terminate_all()     | smc_connect_rdma()
--------------------------------------------------------------
                             | smc_conn_create()
for links in smcibdev        |
        schedule links down  |
                             | smc_buf_create()
                             |  \- smcr_buf_map_usable_links()
                             |      \- no usable links found,
                             |         (rmb->mr = NULL)
                             |
                             | smc_clc_send_confirm()
                             |  \- access conn->rmb_desc->mr[]->rkey
                             |     (panic)

During reboot and IB device module remove, all links will be set
down and no usable links remain in link groups. In such situation
smcr_buf_map_usable_links() should return an error and stop the
CLC flow accessing to uninitialized mr.

Fixes: b9247544 ("net/smc: convert static link ID instances to support multiple links")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Link: https://lore.kernel.org/r/1663656189-32090-1-git-send-email-guwen@linux.alibaba.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

We currently check the MokSBState variable to decide whether we should
treat UEFI secure boot as being disabled, even if the firmware thinks
otherwise. This is used by shim to indicate that it is not checking
signatures on boot images. In the kernel, we use this to relax lockdown
policies.

However, in cases where shim is not even being used, we don't want this
variable to interfere with lockdown, given that the variable may be
non-volatile and therefore persist across a reboot. This means setting
it once will persistently disable lockdown checks on a given system.

So switch to the mirrored version of this variable, called MokSBStateRT,
which is supposed to be volatile, and this is something we can check.

Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Jones <pjones@redhat.com>

When booting the x86 kernel via EFI using the LoadImage/StartImage boot
services [as opposed to the deprecated EFI handover protocol], the setup
header is taken from the image directly, and given that EFI's LoadImage
has no Linux/x86 specific knowledge regarding struct bootparams or
struct setup_header, any absolute addresses in the setup header must
originate from the file and not from a prior loading stage.

Since we cannot generally predict where LoadImage() decides to load an
image (*), such absolute addresses must be treated as suspect: even if a
prior boot stage intended to make them point somewhere inside the
[signed] image, there is no way to validate that, and if they point at
an arbitrary location in memory, the setup_data nodes will not be
covered by any signatures or TPM measurements either, and could be made
to contain an arbitrary sequence of SETUP_xxx nodes, which could
interfere quite badly with the early x86 boot sequence.

(*) Note that, while LoadImage() does take a buffer/size tuple in
addition to a device path, which can be used to provide the image
contents directly, it will re-allocate such images, as the memory
footprint of an image is generally larger than the PE/COFF file
representation.

Cc: <stable@vger.kernel.org> # v5.10+
Link: https://lore.kernel.org/all/20220904165321.1140894-1-Jason@zx2c4.com/Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-09-20 (ice)

Michal re-sets TC configuration when changing number of queues.

Mateusz moves the check and call for link-down-on-close to the specific
path for downing/closing the interface.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Fix interface being down after reset with link-down-on-close flag on
  ice: config netdev tc before setting queues number
====================

Link: https://lore.kernel.org/r/20220920205344.1860934-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The original patch added the static branch to handle the situation,
when assigning an XDP TX queue to every CPU is not possible,
so they have to be shared.

However, in the XDP transmit handler ice_xdp_xmit(), an error was
returned in such cases even before static condition was checked,
thus making queue sharing still impossible.

Fixes: 22bf877e ("ice: introduce XDP_TX fallback path")
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/r/20220919134346.25030-1-larysa.zaremba@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-09-19 (iavf, i40e)

Norbert adds checking of buffer size for Rx buffer checks in iavf.

Michal corrects setting of max MTU in iavf to account for MTU data provided
by PF, fixes i40e to set VF max MTU, and resolves lack of rate limiting
when value was less than divisor for i40e.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Fix set max_tx_rate when it is lower than 1 Mbps
  i40e: Fix VF set max MTU size
  iavf: Fix set max MTU size with port VLAN and jumbo frames
  iavf: Fix bad page state
====================

Link: https://lore.kernel.org/r/20220919223428.572091-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It needs to enter the namespace before reading a file.

Fixes: 4183a8d7 ("perf tools: Allow synthesizing the build id for kernel/modules/tasks in PERF_RECORD_MMAP2")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220920222822.2171056-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  7df54884 ("x86/bugs: Add "unknown" reporting for MMIO Stale Data")

This only causes these perf files to be rebuilt:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o

And addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/lkml/YysTRji90sNn2p5f@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

/proc/kallsyms and /proc/modules are compared before and after the copy
in order to ensure no changes during the copy.

However /proc/modules also might change due to reference counts changing
even though that does not make any difference.

Any modules loaded or unloaded should be visible in changes to kallsyms,
so it is not necessary to check /proc/modules also anyway.

Remove the comparison checking that /proc/modules is unchanged.

Fixes: fc1b691d ("perf buildid-cache: Add ability to add kcore to the cache")
Reported-by: Daniel Dao <dqminh@cloudflare.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Daniel Dao <dqminh@cloudflare.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Originally, (refer commit f90d194a ("perf evlist: Do not poll
events that use the system_wide flag") there wasn't much reason to poll
system-wide events because:

 1. The mmaps get "merged" via set-output anyway (the per-cpu case)
 2. perf reads all mmaps when any event is woken
 3. system-wide mmaps do not fill up as fast as the mmaps for user
    selected events

But there was 1 reason not to poll which was that it prevented correct
termination due to POLLHUP on all user selected events.  That issue is
now easily resolved by using fdarray_flag__nonfilterable.

With the advent of commit ae4f8ae1 ("libperf evlist: Allow
mixing per-thread and per-cpu mmaps"), system-wide mmaps can be used
also in the per-thread case where reason 1 does not apply.

Fix the omission of system-wide events from polling by using the
fdarray_flag__nonfilterable flag.

Example:

 Before:

    $ perf record --no-bpf-event -vvv -e intel_pt// --per-thread uname 2>err.txt
    Linux
    $ grep 'sys_perf_event_open.*=\|pollfd' err.txt
    sys_perf_event_open: pid 155076  cpu -1  group_fd -1  flags 0x8 = 5
    sys_perf_event_open: pid 155076  cpu -1  group_fd -1  flags 0x8 = 6
    sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 7
    sys_perf_event_open: pid -1  cpu 1  group_fd -1  flags 0x8 = 9
    sys_perf_event_open: pid -1  cpu 2  group_fd -1  flags 0x8 = 10
    sys_perf_event_open: pid -1  cpu 3  group_fd -1  flags 0x8 = 11
    sys_perf_event_open: pid -1  cpu 4  group_fd -1  flags 0x8 = 12
    sys_perf_event_open: pid -1  cpu 5  group_fd -1  flags 0x8 = 13
    sys_perf_event_open: pid -1  cpu 6  group_fd -1  flags 0x8 = 14
    sys_perf_event_open: pid -1  cpu 7  group_fd -1  flags 0x8 = 15
    thread_data[0x55fb43c29e80]: pollfd[0] <- event_fd=5
    thread_data[0x55fb43c29e80]: pollfd[1] <- event_fd=6
    thread_data[0x55fb43c29e80]: pollfd[2] <- non_perf_event fd=4

 After:

    $ perf record --no-bpf-event -vvv -e intel_pt// --per-thread uname 2>err.txt
    Linux
    $ grep 'sys_perf_event_open.*=\|pollfd' err.txt
    sys_perf_event_open: pid 156316  cpu -1  group_fd -1  flags 0x8 = 5
    sys_perf_event_open: pid 156316  cpu -1  group_fd -1  flags 0x8 = 6
    sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 7
    sys_perf_event_open: pid -1  cpu 1  group_fd -1  flags 0x8 = 9
    sys_perf_event_open: pid -1  cpu 2  group_fd -1  flags 0x8 = 10
    sys_perf_event_open: pid -1  cpu 3  group_fd -1  flags 0x8 = 11
    sys_perf_event_open: pid -1  cpu 4  group_fd -1  flags 0x8 = 12
    sys_perf_event_open: pid -1  cpu 5  group_fd -1  flags 0x8 = 13
    sys_perf_event_open: pid -1  cpu 6  group_fd -1  flags 0x8 = 14
    sys_perf_event_open: pid -1  cpu 7  group_fd -1  flags 0x8 = 15
    thread_data[0x55cc19e58e80]: pollfd[0] <- event_fd=5
    thread_data[0x55cc19e58e80]: pollfd[1] <- event_fd=6
    thread_data[0x55cc19e58e80]: pollfd[2] <- event_fd=7
    thread_data[0x55cc19e58e80]: pollfd[3] <- event_fd=9
    thread_data[0x55cc19e58e80]: pollfd[4] <- event_fd=10
    thread_data[0x55cc19e58e80]: pollfd[5] <- event_fd=11
    thread_data[0x55cc19e58e80]: pollfd[6] <- event_fd=12
    thread_data[0x55cc19e58e80]: pollfd[7] <- event_fd=13
    thread_data[0x55cc19e58e80]: pollfd[8] <- event_fd=14
    thread_data[0x55cc19e58e80]: pollfd[9] <- event_fd=15
    thread_data[0x55cc19e58e80]: pollfd[10] <- non_perf_event fd=4

Fixes: ae4f8ae1 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915122612.81738-3-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

With mixed per-thread and (system-wide) per-cpu maps, the "any cpu" value
 -1 must be skipped when setting CPU mask bits.

Prior to commit cbd7bfc7 ("tools/perf: Fix out of bound access
to cpu mask array") the invalid setting went unnoticed, but since then
it causes perf record to fail with an error.

Example:

 Before:

   $ perf record -e intel_pt// --per-thread uname
   Failed to initialize parallel data streaming masks

 After:

   $ perf record -e intel_pt// --per-thread uname
   Linux
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.068 MB perf.data ]

Fixes: ae4f8ae1 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915122612.81738-2-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It uses PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl.	 The kernel would return
ENOTTY if it's not supported.  Update the skip reason in that case.

Committer notes:

On s/390 the args aren't used, so need to be marked __maybe_unused.
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20220914183338.546357-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull UML fixes from Richard Weinberger:

 - Various fixes for build warnings

 - Fix default kernel command line

* tag 'for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
  arch: um: Mark the stack non-executable to fix a binutils warning
  um: Prevent KASAN splats in dump_stack()
  um: fix default console kernel parameter
  um: Cleanup compiler warning in arch/x86/um/tls_32.c
  um: Cleanup syscall_handler_t cast in syscalls_32.h

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix missing export for Lantiq watchdog driver

 - fix ethernet phy interface setup for Loongson32

* tag 'mips-fixes_6.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Loongson32: Fix PHY-mode being left unspecified
  MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko

Pull dmaengine fixes from Vinod Koul:
 "A couple of small driver fixes:

   - xilinx_dma: devm_platform_ioremap_resource error handling,
     dma_set_mask_and_coherent failure handling, dt property read
     cleanup

   - refcount leak fix for of_xudma_dev_get()

   - zynqmp_dma: coverity fix for enum typecast"

* tag 'dmaengine-fix-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: zynqmp_dma: Typecast with enum to fix the coverity warning
  dmaengine: ti: k3-udma-private: Fix refcount leak bug in of_xudma_dev_get()
  dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure
  dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property
  dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handling

Pull iommu fixes from Joerg Roedel:
 "Two fixes for Intel VT-d:

   - Check the right capability bit for 5-level page table support.

   - Revert a previous fix which caused a regression with Thunderbolt
     devices"

* tag 'iommu-fixes-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Check correct capability for sagaw determination
  Revert "iommu/vt-d: Fix possible recursive locking in intel_iommu_init()"

Pull sound fixes from Takashi Iwai:
 "A bit more changes than wished, but still manageable amount.

  Most of commits are HD-audio specific device fixes / quirks, while
  there is a revert for the previous fix due to regressions and a
  double-free fix in ALSA core code"

* tag 'sound-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  Revert "ALSA: usb-audio: Split endpoint setups for hw_params and prepare"
  ALSA: core: Fix double-free at snd_card_new()
  ALSA: hda/realtek: Add a quirk for HP OMEN 16 (8902) mute LED
  ALSA: hda/hdmi: Fix the converter reuse for the silent stream
  ALSA: hda/realtek: Add quirk for ASUS GA503R laptop
  ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack
  ALSA: hda/realtek: Add pincfg for ASUS G513 HP jack
  ALSA: hda/realtek: Re-arrange quirk table entries
  ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop
  ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5570 laptop
  ALSA: hda: Fix Nvidia dp infoframe
  ALSA: hda/realtek: Add quirk for Huawei WRT-WX9
  ALSA: hda/tegra: set depop delay for tegra
  ALSA: hda: add Intel 5 Series / 3400 PCI DID
  ALSA: hda: Fix hang at HD-audio codec unbinding due to refcount saturation

Pull exfat fix from Namjae Jeon:

 - fix integer overflow on large partitions

* tag 'exfat-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: fix overflow for large capacity partition

Merge tag 'linux-can-fixes-for-6.0-20220921' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-09-21

The 1st patch is by me, targets the flexcan driver and fixes a
potential system hang on single core systems under high CAN packet
rate.

The next 2 patches are also by me and target the gs_usb driver. A
potential race condition during the ndo_open callback as well as the
return value if the ethtool identify feature is not supported are
fixed.

* tag 'linux-can-fixes-for-6.0-20220921' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
  can: gs_usb: gs_can_open(): fix race dev->can.state condition
  can: flexcan: flexcan_mailbox_read() fix return value for drop = true
====================

Link: https://lore.kernel.org/r/20220921083609.419768-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The missing header makes it hard for programs like elfutils to open
these files.

Fixes: 2d86612a ("perf symbol: Correct address for bss symbols")
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Lieven Hey <lieven.hey@kdab.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220915092910.711036-1-lieven.hey@kdab.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>