- 16 Oct, 2007 40 commits
-
-
Krzysztof Helt authored
This patch replaces a common delay loop by a function. It also uses ARRAY_SIZE macro for the rates table. Acked-by:
Rene Herman <rene.herman@gmail.com> Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Krzysztof Helt authored
This patch replaces a common delay loop by a function. It also uses ARRAY_SIZE macro for the rates table. Acked-by:
-
Krzysztof Helt authored
The linux/of.h header should be used instead of asm/prom.h. Signed-off-by:
-
Takashi Iwai authored
Added the quirk entry for Casper CPR2000 (model=acer) with ALC268 codec (ALSA bug#3343). Signed-off-by:
-
Takashi Iwai authored
Added the missing model option strings for ALC882 codecs. Also added the corresponding description in ALSA-Configuration.txt. Signed-off-by:
-
Takashi Iwai authored
Added the support for ASUS A7M with ALC882 codec. It's slightly different from ASUS A7J. The patch taken from ALSA bug#3000 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3000Signed-off-by:
-
Takashi Iwai authored
Added a new model laptop-automute for AD1986A, which has the HP jack detection and auto-muting of the speaker. Currently, it's used for Lenovo N100. Signed-off-by:
-
Takashi Iwai authored
Added the missing description of models for Dell machines with STAC9200 HD-audio codec chip. Signed-off-by:
-
Takashi Iwai authored
The last patch to change/add Dell models have wrong pin config orders. This patch fixes the pin positions. Taken from ALSA bug#3319, https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3319Signed-off-by:
-
Takashi Iwai authored
Add the entry for Acer Aspire 9303 (model=acer-aspire) with ALC883 codec. Signed-off-by:
-
Krzysztof Helt authored
The chip structure is now allocated by snd_card_new() and it must not be released by separate kfree(). Signed-off-by:
-
Krzysztof Helt authored
This patch converts the dbri driver to use OF framework. Signed-off-by:
-
Krzysztof Helt authored
This patch splits the cs4231.h file into two parts: - cs4231-regs.h which contain register constants and macros - cs4231.h which includes the above and contain rest of the definitions This will allow to share register definitions between x86 ISA cs4231 and SPARC cs4231. Signed-off-by:
-
Krzysztof Helt authored
This patch: - removes redundant constant suffices - removes redundant parentheses - removes redundant curly brackets - removes check if a spinlock is locked inside method which is only called with the spinlock locked - moves few functions to the __init section - removes line which appears twice after the previous patch - minor comments improvements Signed-off-by:
-
Krzysztof Helt authored
This patch does some code improvements to make driver (both code and binary) shorter. It also make use of card->private_data pointer to store chip information. Signed-off-by:
-
Andres Salomon authored
We really only care about the first two bus masters (playback and capture). There's no need to have unused BM code lying around, so let's get rid of it. If for some reason we trigger an IRQ for some BM that we're not using.. well, that warrants spitting out an error message (imo). Signed-off-by:
Andres Salomon <dilinger@debian.org> Signed-off-by:
-
Andres Salomon authored
According to 6.3.2.7 of the cs5535/cs5536 data sheets, the ACC_BM[x]_CMD registers are only 8 bits wide. This driver treats them as 32 bits wide, and also has bits in the wrong place. Simple fix to the definitions. Signed-off-by:
-
Andres Salomon authored
Save the PCI state before disabling the device, and add some error checking. Signed-off-by:
-
Andres Salomon authored
In the suspend path, we currently save the PRD registers and then disable DMA. This is racy; the sound hardware might update the PRD register as it finishes processing some DMA pages between when we've saved the PRD registers and when DMA actually gets disabled. Furthermore, we actively check whether or not DMA is enabled before saving PRD registers; there's no reason to do that, as the PRD registers should not update when we twiddle the ACC_BM[x]_CMD register(s). Worst case, we save the PRD registers twice; even powering down the ACC shouldn't mess with the PRD registers (according to the 5536 data sheet, section 5.3.7.4, power-down procedure). This patch reworks all that to first disable DMA, and then save PRD registers. Signed-off-by:
-
Andres Salomon authored
We're never actually setting dma->substream to the current substream; that means the dma->substream checks that we do in the suspend/resume path are never satisfied, and the PRD registers are never correctly managed. This changes it so that we set the substream when constructing the specific bus master DMA, and unsetting it when we tear down the BM's DMA. Signed-off-by:
-
Maxim Levitsky authored
1) Create seperate mixer controls for each ADC 2) Make number of substreams of capture PCM device be equal to number of ADCs Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
-
Maxim Levitsky authored
VolumeKnob is present on most sigmatel codecs, it allows to decrease volume of all DACs at once, it is a kind of post-procesing volume. Note that all output amps of sigmatel only decrease volume, and all input amps only increase volume. Signed-off-by:
-
Maxim Levitsky authored
The analog loopback routes the sound just before it enters ADC0 to output of DAC0. Signed-off-by:
-
Maxim Levitsky authored
Center/LFE channels are located on same jack, so it can be usefull to swap them. Signed-off-by:
-
Maxim Levitsky authored
Comment in hda_intel.c states that 'the explicit resume is needed only when POWER_SAVE isn't set', but this is not true. There is no code that will automaticly power up the codec on resume, but only code that powers it up when user accesses it. So if user leaves a sound playing, codec will not be powered To fix that I check if there are any codecs that should be powered codec->power_count, and if so I power them up together with main controller. Signed-off-by:
-
Maxim Levitsky authored
codec->power_transition is supposed to be true while codec is going to be shut off if in the mean time somebody calls snd_hda_power_up, hda_power_work will not shut down the codec, but nether will clear codec->power_transition, thus it stays on forever. Fix this. Signed-off-by:
-
Clemens Ladisch authored
The '-MCx' suffix that is expected by alsa-lib is only needed in the card driver string, so we can show the actual chip name in the shortname. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Clemens Ladisch authored
Check that the UART_EN bit actually enabled the MPU-401 port. Apparently, C-Media thinks that it is a good idea to be paranoid here. Signed-off-by:
-
Clemens Ladisch authored
Integrated MPU-401/OPL3 ports are available with chip version 39 and later, so we do not test for the port with version 37. Now that the test is known to work, we can again enable the MIDI port by default. Signed-off-by:
-
Clemens Ladisch authored
Add support for 88.2 kHz and 96 kHz analog and digital playback on CMI8768/CMI8770 chips. Signed-off-by:
-
Clemens Ladisch authored
Remove the constraint that sets the channel limit for the first playback device to that of the second one; the first device supports only stereo. Signed-off-by:
-
Takashi Iwai authored
The STAC codes adds line_out_pins[] for shared mic/line-inputs accordingly. But, the current code may give a hole with NID=0 in some setting, which results in an error at probe. This patch fixes the problem. Signed-off-by:
-
Takashi Iwai authored
The resume procedure for STAC codecs overrides the cached values and results in the wrong (reset) PIN state. The patch gets rid of the overriding part and simplifies the resume. Signed-off-by:
-
Mark Hills authored
Allow the interface's mixer to be used, and give the interface its correct name. Signed-off-by:
Mark Hills <mark@pogo.org.uk> Signed-off-by:
-
Maxim Levitsky authored
Clean up the mixer entries for Input Source using a macro. Signed-off-by:
-
zhejiang authored
Fix the index for Front Mic capture source on ALC262 HP machines. Also, added the new capture source list for HP BPC DC7000 series to work properly. From: zhejiang <zhe.jiang@intel.com> Signed-off-by:
-
Remy Bruno authored
added support for the latest revision of the 9632 (and hopefully a few following ones). The DSP matrix was not working because of wrong identification of the card in this part of the code. Signed-off-by:
Remy Bruno <remy.bruno@trinnov.com> Signed-off-by:
-
Remy Bruno authored
* better report of speed mode change failures * autosync_ref control bugfix (was reporting pref_sync_ref instead) (changed HDSPM_AES32_AUTOSYNC_FROM_NONE value to comply with array indexing in snd_hdspm_info_autosync_ref()) * added support for master modes up to 192kHz (clock source control value was restricted up to 96kHz) Signed-off-by:
-
Oliver Neukum authored
usb_set_interface() can fail, even for altsetting 0 Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Clemens Ladisch authored
Add a quirk to detect the Serato Scratch Live DJ Box. Signed-off-by:
-
