Allow platform drivers to provide their logic to select an appropriate
PCS.
Tested-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1sHhoM-00Fesu-8E@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tariq Toukan says:

====================
mlx5 misc patches 2023-06-13

This patchset contains small code cleanups and enhancements from the
team to the mlx5 core and Eth drivers.

Series generated against:
commit 3ec8d757 ("CDC-NCM: add support for Apple's private interface")
====================

Link: https://lore.kernel.org/r/20240613210036.1125203-1-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Calculate the pseudo-header checksum for both IPSec transport mode and
IPSec tunnel mode for mlx5 devices that do not implement a pure hardware
checksum offload for L4 checksum calculation. Introduce a capability bit
that identifies such mlx5 devices.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-7-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the tcp specific helpers to calculate the tcp pseudo header checksum
instead of the csum_*_magic ones.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-6-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The code no longer treats only UDP tunnels, adjust the outdated comment.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-5-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Replace deprecated strcpy with strscpy.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-4-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently a ct entry is stored in both ct and ct-nat tables. ct
action is directed to the ct table, while ct nat action is directed
to the nat table. ct-nat entries perform the nat header rewrites,
if required. The current design assures that a ct action will match
in hardware even if the tuple has nat configured, it will just not
execute it. However, storing each connection in two tables increases
the system's memory consumption while reducing its insertion rate.

Offload a connection to either ct or the ct-nat table. Add a miss
fall-through rule from ct-nat table to the ct table allowing ct(nat)
action on non-natted connections.

ct action on natted connections, by default, will be handled by the
software miss path.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-3-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

TSAR is the correct spelling (Transmit Scheduling ARbiter).
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-2-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The Realtek RTL8224 PHY is a 2.5Gbps capable PHY. It only uses the
clause 45 MDIO interface and can leverage the support that has already
been added for the other 822x PHYs.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20240611053415.2111723-1-chris.packham@alliedtelesis.co.nzSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 12c2d0a5 ("net: lan966x: add ethtool configuration and statistics")
added support for various standard stats. We should not clear the stats
which are not collected by the device. Core code uses a special
initializer to detect when device does not report given stat.
Acked-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240613003222.3327368-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ignore the ENODEV failures returned by kernel_sendmsg(). These errors
indicate that either the local port has been closed or the remote has
gone down. Neither of these scenarios are fatal and will eventually be
handled through packets that are later queued on the control port.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Sarannya Sasikumar <quic_sarannya@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240612063156.1377210-1-quic_sarannya@quicinc.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Christophe Roullier says:

====================
Series to deliver Ethernet for STM32MP13

STM32MP13 is STM32 SOC with 2 GMACs instances
    GMAC IP version is SNPS 4.20.
    GMAC IP configure with 1 RX and 1 TX queue.
    DMA HW capability register supported
    RX Checksum Offload Engine supported
    TX Checksum insertion supported
    Wake-Up On Lan supported
    TSO supported
Rework dwmac glue to simplify management for next stm32 (integrate RFC from Marek)

V2: - Remark from Rob Herring (add Krzysztof's ack in patch 02/11, update in yaml)
      Remark from Serge Semin (upate commits msg)
V3: - Remove PHY regulator patch and Ethernet2 DT because need to clarify how to
      manage PHY regulator (in glue or PHY side)
    - Integrate RFC from Marek
    - Remark from Rob Herring in YAML documentation
V4: - Remark from Marek (remove max-speed, extra space in DT, update commit msg)
    - Remark from Rasmus (add sign-off, add base-commit)
    - Remark from Sai Krishna Gajula
V5: - Fix warning during build CHECK_DTBS
    - Remark from Marek (glue + DT update)
    - Remark from Krzysztof about YAML (Make it symmetric)
V6: - Replace pr_debug by dev_dbg
    - Split serie driver/DTs separately
V7: - Remark from Marek (update sysconfig register mask)
====================

Link: https://lore.kernel.org/r/20240611083606.733453-1-christophe.roullier@foss.st.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add Ethernet support for STM32MP13.
STM32MP13 is STM32 SOC with 2 GMACs instances.
GMAC IP version is SNPS 4.20.
GMAC IP configure with 1 RX and 1 TX queue.
DMA HW capability register supported
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
TSO supported
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add possibility to have second argument in syscon property to manage
mask. This mask will be used to address right BITFIELDS of PMCR register.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Trivial, fix up the comments using 'Mhz' to 'MHz'.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Use dev_err()/dev_dbg() and phy_modes() to print PHY mode instead of
pr_debug() and hand-written PHY mode decoding. This way, each debug
print has associated device with it and duplicated mode decoding is
removed.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Pull the PMCR clock mux configuration into a separate function. This is
the final change of three, which moves external clock rate validation,
external clock selector decoding, and clock mux configuration into
separate functions. This should make the code easier to understand.
No functional change intended.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Pull the external clock selector into a separate function, to avoid
conflating it with external clock rate validation and clock mux
register configuration. This should make the code easier to read and
understand.

The dwmac->enable_eth_ck variable in the end indicates whether the MAC
clock are supplied by external oscillator (true) or internal RCC clock
IP (false). The dwmac->enable_eth_ck value is set based on multiple DT
properties, some of them deprecated, some of them specific to bus mode.

The following DT properties and variables are taken into account. In
each case, if the property is present or true, MAC clock is supplied
by external oscillator.
- "st,ext-phyclk", assigned to variable dwmac->ext_phyclk
  - Used in any mode (MII/RMII/GMII/RGMII)
  - The only non-deprecated DT property of the three
- "st,eth-clk-sel", assigned to variable dwmac->eth_clk_sel_reg
  - Valid only in GMII/RGMII mode
  - Deprecated property, backward compatibility only
- "st,eth-ref-clk-sel", assigned to variable dwmac->eth_ref_clk_sel_reg
  - Valid only in RMII mode
  - Deprecated property, backward compatibility only

The stm32mp1_select_ethck_external() function handles the aforementioned
DT properties and sets dwmac->enable_eth_ck accordingly.

The stm32mp1_set_mode() is adjusted to call stm32mp1_select_ethck_external()
first and then only use dwmac->enable_eth_ck to determine hardware clock mux
settings.

No functional change intended.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Pull the external clock frequency validation into a separate function,
to avoid conflating it with external clock DT property decoding and
clock mux register configuration. This should make the code easier to
read and understand.

This does change the code behavior slightly. The clock mux PMCR register
setting now depends solely on the DT properties which configure the clock
mux between external clock and internal RCC generated clock. The mux PMCR
register settings no longer depend on the supplied clock frequency, that
supplied clock frequency is now only validated, and if the clock frequency
is invalid for a mode, it is rejected.

Previously, the code would switch the PMCR register clock mux to internal
RCC generated clock if external clock couldn't provide suitable frequency,
without checking whether the RCC generated clock frequency is correct. Such
behavior is risky at best, user should have configured their clock correctly
in the first place, so this behavior is removed here.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

New STM32 SOC have 2 GMACs instances.
GMAC IP version is SNPS 4.20.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch provides support for sending supervision HSR frames with
MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is
enabled.

Supervision frames with RedBox MAC address (appended as second TLV)
are only send for ProxyNodeTable nodes.

This patch series shall be tested with hsr_redbox.sh script.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Martin Schiller says:

====================
net: dsa: lantiq_gswip: code improvements

This patchset for the lantiq_gswip driver is a collection of minor fixes
and coding improvements by Martin Blumenstingl without any real changes
in the actual functionality.
====================

Link: https://lore.kernel.org/r/20240611135434.3180973-1-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Print that no FID is found for bridge %s instead of the incorrect
message that the port is not part of a bridge.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-13-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update the comments in gswip_port_vlan_filtering() so it's clear that
there are two separate cases, one for "tag based VLAN" and another one
for "port based VLAN".
Suggested-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-12-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The port validation in gswip_add_single_port_br() is superfluous and
can be omitted.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240611135434.3180973-11-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Only bits [5:0] in mac_bridge.key[3] are reserved for the FID.
Also, for dynamic (learned) entries, bits [7:4] in mac_bridge.val[0]
represents the port.

Introduce new macros GSWIP_TABLE_MAC_BRIDGE_KEY3_FID and
GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT macro and use it throughout the driver.
Also rename and update GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC to use the
BIT() macro. This makes the driver code easier to understand.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240611135434.3180973-10-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The addr variable in gswip_port_fdb_dump() stores a mac address. Use
ETH_ALEN to make this consistent across other drivers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-9-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make the check for the CPU port in gswip_port_change_mtu() consistent
with other areas of the driver by using dsa_is_cpu_port().
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-8-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Before commit 74be4bab ("net: dsa: do not enable or disable non user
ports"), gswip_port_enable/disable() were also executed for the cpu port
in gswip_setup() which disabled the cpu port during initialization.

Let's restore this by removing the dsa_is_user_port checks. Also, let's
clean up the gswip_port_enable() function so that we only have to check
for the cpu port once. The operation reordering done here is safe.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240611135434.3180973-7-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We don't need to manually call gswip_port_enable() from within
gswip_setup() for the CPU port. DSA does this automatically for us.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-6-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

dev_err_probe() can be used to simplify the existing code. Also it means
we get rid of the following warning which is seen whenever the PMAC
(Ethernet controller which connects to GSWIP's CPU port) has not been
probed yet:
  gswip 1e108000.switch: dsa switch register failed: -517
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-5-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some dev_err are missing the terminating \n. Let's add that.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240611135434.3180973-4-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add the CPU port to gswip_xrx200_phylink_get_caps() and
gswip_xrx300_phylink_get_caps(). It connects through a SoC-internal bus,
so the only allowed phy-mode is PHY_INTERFACE_MODE_INTERNAL.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-3-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert the lantiq,gswip bindings to YAML format.

Also add this new file to the MAINTAINERS file.

Furthermore, the CPU port has to specify a phy-mode and either a phy or
a fixed-link. Since GSWIP is connected using a SoC internal protocol
there's no PHY involved. Add phy-mode = "internal" and a fixed-link to
the example code to describe the communication between the PMAC
(Ethernet controller) and GSWIP switch.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240611135434.3180973-2-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Leon Romanovsky says:

====================
net: mana: Allow variable size indirection table

Like we talked, I created new shared branch for this patch:
https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git/log/?h=mana-shared

* 'mana-shared' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  net: mana: Allow variable size indirection table
====================

Link: https://lore.kernel.org/all/20240612183051.GE4966@unrealSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

No conflicts, no adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth and netfilter.

  Slim pickings this time, probably a combination of summer, DevConf.cz,
  and the end of first half of the year at corporations.

  Current release - regressions:

   - Revert "igc: fix a log entry using uninitialized netdev", it traded
     lack of netdev name in a printk() for a crash

  Previous releases - regressions:

   - Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ

   - geneve: fix incorrectly setting lengths of inner headers in the
     skb, confusing the drivers and causing mangled packets

   - sched: initialize noop_qdisc owner to avoid false-positive
     recursion detection (recursing on CPU 0), which bubbles up to user
     space as a sendmsg() error, while noop_qdisc should silently drop

   - netdevsim: fix backwards compatibility in nsim_get_iflink()

  Previous releases - always broken:

   - netfilter: ipset: fix race between namespace cleanup and gc in the
     list:set type"

* tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
  bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
  af_unix: Read with MSG_PEEK loops if the first unread byte is OOB
  bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response
  gve: Clear napi->skb before dev_kfree_skb_any()
  ionic: fix use after netif_napi_del()
  Revert "igc: fix a log entry using uninitialized netdev"
  net: bridge: mst: fix suspicious rcu usage in br_mst_set_state
  net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
  net/ipv6: Fix the RT cache flush via sysctl using a previous delay
  net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters
  gve: ignore nonrelevant GSO type bits when processing TSO headers
  net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP
  netfilter: Use flowlabel flow key when re-routing mangled packets
  netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
  netfilter: nft_inner: validate mandatory meta and payload
  tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()
  mailmap: map Geliang's new email address
  mptcp: pm: update add_addr counters after connect
  mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID
  mptcp: ensure snd_una is properly initialized on connect
  ...

Pull NFS client fixes from Trond Myklebust:
 "Bugfixes:
   - NFSv4.2: Fix a memory leak in nfs4_set_security_label
   - NFSv2/v3: abort nfs_atomic_open_v23 if the name is too long.
   - NFS: Add appropriate memory barriers to the sillyrename code
   - Propagate readlink errors in nfs_symlink_filler
   - NFS: don't invalidate dentries on transient errors
   - NFS: fix unnecessary synchronous writes in random write workloads
   - NFSv4.1: enforce rootpath check when deciding whether or not to trunk

  Other:
   - Change email address for Trond Myklebust due to email server concerns"

* tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: add barriers when testing for NFS_FSDATA_BLOCKED
  SUNRPC: return proper error from gss_wrap_req_priv
  NFSv4.1 enforce rootpath check in fs_location query
  NFS: abort nfs_atomic_open_v23 if name is too long.
  nfs: don't invalidate dentries on transient errors
  nfs: Avoid flushing many pages with NFS_FILE_SYNC
  nfs: propagate readlink errors in nfs_symlink_filler
  MAINTAINERS: Change email address for Trond Myklebust
  NFSv4: Fix memory leak in nfs4_set_security_label

Pull memblock fixes from Mike Rapoport:
 "Fix validation of NUMA coverage.

  memblock_validate_numa_coverage() was checking for a unset node ID
  using NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID was
  specified by buggy firmware.

  Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in
  memblock_set_node() and use NUMA_NO_NODE in x86::numa_init()"

* tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  x86/mm/numa: Use NUMA_NO_NODE when calling memblock_set_node()
  memblock: make memblock_set_node() also warn about use of MAX_NUMNODES

In case of token is released due to token->state == BNXT_HWRM_DEFERRED,
released token (set to NULL) is used in log messages. This issue is
expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But
this error code is returned by recent firmware. So some firmware may not
return it. This may lead to NULL pointer dereference.
Adjust this issue by adding token pointer check.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 8fa4219d ("bnxt_en: add dynamic debug support for HWRM messages")
Suggested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240611082547.12178-1-amishin@t-argos.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>