- 01 May, 2005 40 commits
-
-
Peter Missel authored
This is take two of a patch that should have appeared two days ago, before yesterday's "remote control" patch for the same card. This patch sets unconnected GPIO to Output to keep them from floating (just good driver writing practice, being nice to the chip), and uses GPIO16 to switch TV vs. FM - this pin switches inputs onto the tuner, as well as the audio output from the tuner into the 7135 SIF input. Consequently, FM radio support is being un-commented because it's now working (sort of, see below). These two patches get the card almost fully operational; there appears to be a bug in tda8290.c remaining that puts an offset onto the tuned frequency in FM radio mode. We're investigating. Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Peter Missel authored
Subject says it ... this card's IR microcontroller design and attachment are compatible to the company's previous designs, so the patch was as simple as it gets. DESC LifeView FlyTV Platinum FM: GPIO usage EDESC From: Peter Missel <peter.missel@onlinehome.de> This is take two of a patch that should have appeared two days ago, before yesterday's "remote control" patch for the same card. This patch sets unconnected GPIO to Output to keep them from floating (just good driver writing practice, being nice to the chip), and uses GPIO16 to switch TV vs. FM - this pin switches inputs onto the tuner, as well as the audio output from the tuner into the 7135 SIF input. Consequently, FM radio support is being un-commented because it's now working (sort of, see below). These two patches get the card almost fully operational; there appears to be a bug in tda8290.c remaining that puts an offset onto the tuned frequency in FM radio mode. We're investigating. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
It's trivial for the resize option to auto-get the underlying device size, while it's harder for the user. I've copied the code from jfs. Since of the different reiserfs option parser (which does not use the superior match_token used by almost every other filesystem), I've had to use the "resize=auto" and not "resize" option to specify this behaviour. Changing the option parser to the kernel one wouldn't be bad but I've no time to do this cleanup in this moment. Btw, the mount(8) man page should be updated to include this option. Cc the relevant people, please (I hope I cc'ed the right people). Cc: <reiserfs-dev@namesys.com> Cc: <reiserfs-list@namesys.com> Cc: <mtk-manpages@gmx.net> Cc: Alex Zarochentsev <zam@namesys.com> Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Paul E. McKenney authored
Update the RCU documentation to allow for the new synchronize_rcu() and synchronize_sched() primitives. Fix a few other nits as well. Signed-off-by:
Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by:
-
Paul E. McKenney authored
This patch changes calls to synchronize_kernel(), deprecated in the earlier "Deprecate synchronize_kernel, GPL replacement" patch to instead call the new synchronize_rcu() and synchronize_sched() APIs. Signed-off-by:
-
Paul E. McKenney authored
The synchronize_kernel() primitive is used for quite a few different purposes: waiting for RCU readers, waiting for NMIs, waiting for interrupts, and so on. This makes RCU code harder to read, since synchronize_kernel() might or might not have matching rcu_read_lock()s. This patch creates a new synchronize_rcu() that is to be used for RCU readers and a new synchronize_sched() that is used for the rest. These two new primitives currently have the same implementation, but this is might well change with additional real-time support. Both new primitives are GPL-only, the old primitive is deprecated. Signed-off-by:
-
Paul E. McKenney authored
Add a deprecated_for_modules macro that allows symbols to be deprecated only when used by modules, as suggested by Andrew Morton some months back. Signed-off-by:
-
Paul E. McKenney authored
The gpl exports need to be put back. Moving them to GPL -- but in a measured manner, as I proposed on this list some months ago -- is fine. Changing these particular exports precipitously is most definitely -not- fine. Here is my earlier proposal: http://marc.theaimsgroup.com/?l=linux-kernel&m=110520930301813&w=2 See below for a patch that puts the exports back, along with an updated version of my earlier patch that starts the process of moving them to GPL. I will also be following this message with RFC patches that introduce two (EXPORT_SYMBOL_GPL) interfaces to replace synchronize_kernel(), which then becomes deprecated. Signed-off-by: <paulmck@us.ibm.com> Signed-off-by:
-
Daniel Drake authored
The current logic assumes that a /proc/<PID>/task directory should have a hardlink count of 3, probably counting ".", "..", and a directory for a single child task. It's fairly obvious that this doesn't work out correctly when a PID has more than one child task, which is quite often the case. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
Daniel Drake authored
The pid directories in /proc/ currently return the wrong hardlink count - 3, when there are actually 4 : ".", "..", "fd", and "task". This is easy to notice using find(1): cd /proc/<pid> find In the output, you'll see a message similar to: find: WARNING: Hard link count is wrong for .: this may be a bug in your filesystem driver. Automatically turning on find's -noleaf option. Earlier results may have failed to include directories that should have been searched. http://bugs.gentoo.org/show_bug.cgi?id=86031 I also noticed that CONFIG_SECURITY can add a 5th: attr, and performed a similar fix on the task directories too. Signed-off-by:
-
Stas Sergeev authored
The attached patch moves the IRQ-related SA_xxx flags (namely, SA_PROBE, SA_SAMPLE_RANDOM and SA_SHIRQ) from all the arch-specific headers to linux/signal.h. This looks like a left-over after the irq-handling code was consolidated. The code was moved to kernel/irq/*, but the flags are still left per-arch. Right now, adding a new IRQ flag to the arch-specific header, like this patch does: http://cvs.sourceforge.net/viewcvs.py/*checkout*/alsa/alsa-driver/utils/patches/pcsp-kernel-2.6.10-03.diff?rev=1.1 no longer works, it breaks the compilation for all other arches, unless you add that flag to all the other arch-specific headers too. So I think such a clean-up makes sense. Signed-off-by:
Stas Sergeev <stsp@aknet.ru> Signed-off-by:
-
Matt Mackall authored
Arrange for all kernel printks to be no-ops. Only available if CONFIG_EMBEDDED. This patch saves about 375k on my laptop config and nearly 100k on minimal configs. Signed-off-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Matt Mackall authored
Remove PAGE_BUG - repalce it with BUG and BUG_ON. Signed-off-by:
-
Matt Mackall authored
This patch eliminates all kernel BUGs, trims about 35k off the typical kernel, and makes the system slightly faster. Signed-off-by:
-
Matt Mackall authored
Add a pair of rlimits for allowing non-root tasks to raise nice and rt priorities. Defaults to traditional behavior. Originally written by Chris Wright. The patch implements a simple rlimit ceiling for the RT (and nice) priorities a task can set. The rlimit defaults to 0, meaning no change in behavior by default. A value of 50 means RT priority levels 1-50 are allowed. A value of 100 means all 99 privilege levels from 1 to 99 are allowed. CAP_SYS_NICE is blanket permission. (akpm: see http://www.uwsg.iu.edu/hypermail/linux/kernel/0503.1/1921.html for tips on integrating this with PAM). Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Cornelia Huck authored
Synchronize documentation with current interface. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Cornelia Huck authored
The ioctl32_conversion routines will be deprecated: Remove them from the crypto driver. Signed-off-by:
-
Cornelia Huck authored
The ioctl32_conversion routines will be deprecated: Remove them from dasd_cmb and handle the three cmb ioctls like all other dasd ioctls. Signed-off-by:
-
Horst Hummel authored
The first blocks on a cdl formatted dasd device are smaller than the blocksize of the device. Read requests are padded with a 'e5' pattern. Write requests should not pad the (user) buffer with 'e5' because a write request is not allowed to modify the buffer. Signed-off-by:
-
Stefan Weinhuber authored
The DASD device driver never reorders the I/O requests and relies on the hardware to write all data to nonvolatile storage before signaling a successful write. Hence, the only thing we have to do to support write barriers is to set the queue ordered flag. Signed-off-by:
-
Horst Hummel authored
The independent read-only flags in devmap, dasd_device and gendisk are not kept in sync. Use one bit per feature in the dasd driver and keep that bit in sync with the gendisk bit. Signed-off-by:
-
Michael Holzheu authored
The current limitation of 16 characters of the debug feature names turned out to be insufficient. Increase it to 64 characters. Signed-off-by:
-
Martin Schwidefsky authored
An arbitrary guest must not be allowed to trigger cmm actions. Only one specific guest namely the one that serves as the resource monitor may send cmm messages. Add a parameter that allows to specify the guest that may send messages. z/VMs resource manager has the name 'VMRMSVM' which is the default. Signed-off-by:
-
Peter Oberparleiter authored
Provide an easy way to define a non-zero storage key at compile time. This is useful for debugging purposes. Signed-off-by:
-
Heiko Carstens authored
The memory setup didn't take care of memory holes and this makes the memory management think there would be more memory available than there is in reality. That causes the OOM killer to kill processes even if there is enough memory left that can be written to the swap space. The patch fixes this by using free_area_init_node with an array of memory holes instead of free_area_init. Further the patch cleans up the code in setup.c by splitting setup_arch into smaller pieces. Signed-off-by:
-
Martin Schwidefsky authored
Fix overflow in calculation of the new tod value in stop_hz_timer and fix wrong virtual timer list idle time in case the virtual timer is already expired in stop_cpu_timer. Signed-off-by:
-
Martin Schwidefsky authored
Regenerate the default configuration for s390. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Use the set_disk_ro() API when the backing file is read-only, to mark the disk read-only, during the ->open(). The current hack does not work when doing a mount -o remount. Also, mark explicitly the code paths which should no more be triggerable (I've removed the WARN_ON(1) things). They should actually become BUG()s probably but I'll avoid that since I'm not so sure the change works so well. I gave it only some limited testing. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Add some commentary about UML internals, for a strange trick. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Use this: .set_page_dirty = __set_page_dirty_nobuffers, We already dropped the inclusion of <linux/buffer_head.h>, and we don't have a backing block device for this FS. "Without having looked at it, I'm sure that hostfs does not use buffer_heads. So setting your ->set_page_dirty a_op to point at __set_page_dirty_nobuffers() is a reasonable thing to do - it'll provide a slight speedup." This speedup is one less spinlock held and one less conditional branch, which isn't bad. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Fix some console locking problems (including scheduling in atomic) and various reorderings and cleanup in that code. Not yet ready for 2.6.12 probably. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Reuse asm-x86-64/unistd.h to build our syscall table, like x86-64 already does. Like for i386, we must add some #defines for all the (right!) changes UML does to x86-64 syscall table. Note: I noted a bogus: [ __NR_sched_yield ] = (syscall_handler_t *) yield, while doing this patch (which could only be a workaround for some strange bug, but I would ignore this possibility). I'm changing this without notice. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Fix the moved syscall table for the x86_64 SUBARCH: - redirect __NR_chown and such to versions aware of 32-bit UIDs, - avoid the useless hack for sys_nfsservctl, - use sys_sendfile64 in the table rather than sys_sendfile. - __NR_uselib is sys_ni_syscall on x86_64 (which does not support A.OUT). - __NR_getrlimit is sys_getrlimit, not sys_old_getrlimit Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Split the i386 entry.S files into entry.S and syscall_table.S which is included in the previous one (so actually there is no difference between them) and use the syscall_table.S in the UML build, instead of tracking by hand the syscall table changes (which is inherently error-prone). We must only insert the right #defines to inject the changes we need from the i386 syscall table (for instance some different function names); also, we don't implement some i386 syscalls, as ioperm(), nor some TLS-related ones (yet to provide). Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
GCC 2.95 uses __va_copy instead of va_copy. Handle it inside compiler.h instead of in a casual file, and avoid the risk that this breaks with a newer compiler (which it could do). Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Cleanup: make an inline of this empty proc. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
We want to make possible, for the user, to enable the i586 AES implementation. This requires a restructure. - Add a CONFIG_UML_X86 to notify that we are building a UML for i386. - Rename CONFIG_64_BIT to CONFIG_64BIT as is used for all other archs - Tell crypto/Kconfig that UML_X86 is as good as X86 - Tell it that it must exclude not X86_64 but 64BIT, which will give the same results. - Tell kbuild to descend down into arch/i386/crypto/ to build what's needed. Signed-off-by:
-
Rob Landley authored
Old versions of sed from 1998 (predating the first release of gcc 2.95, but still in use by debian stable) don't understand the single-line version of the sed append command. Since newer versions of sed still understand the... ahem, "vintage" form of the command, change our code to use that. Signed-off-by:
Rob Landley <rob@landley.net> Acked-by:
Ian McDonald <imcdnzl@gmail.com> Signed-off-by:
-
Andree Leidenfrost authored
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Fix the error path, which is triggered when the processor misses the fpx regs (i.e. the "fxsr" cpuinfo feature). For instance by VIA C3 Samuel2. Signed-off-by: -
blaisorblade@yahoo.it authored
This trick is useless, because sys_ni.c will handle this problem by itself, like it does even on UML for other syscalls. Also, it does not provide the NFSD syscall when NFSD is compiled as a module, which is a big problem. Signed-off-by:
-
