This is a preliminary patch to add MT7988 SoC support since it runs 3
macs instead of 2.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/3563e5fab367e7d79a7f1296fabaa5c20f202d7a.1690246066.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce version field in mtk_soc_data data structure in order to
make mtk_eth driver easier to maintain for chipset configuration
codebase. Get rid of MTK_NETSYS_V2 bit in chip capabilities.
This is a preliminary patch to introduce support for MT7988 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/e52fae302ca135436e5cdd26d38d87be2da63055.1690246066.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce DT bindings for the MT7988 SoC to mediatek,net.yaml.
The MT7988 SoC got 3 Ethernet MACs operating at a maximum of
10 Gigabit/sec supported by 2 packet processor engines for
offloading tasks.
The first MAC is hard-wired to a built-in switch which exposes
four 1000Base-T PHYs as user ports.
It also comes with built-in 2500Base-T PHY which can be used
with the 2nd GMAC.
The 2nd and 3rd GMAC can be connected to external PHYs or provide
SFP(+) cages attached via SGMII, 1000Base-X, 2500Base-X, USXGMII,
5GBase-KR or 10GBase-KR.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/3c83d2c0d629dac064ec4396132538c52e77a57f.1690246066.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Document the Ethernet controller found in the MediaTek MT7621 MIPS SoC
family which is supported by the mtk_eth_soc driver.

Fixes: 889bcbde ("net: ethernet: mediatek: support MT7621 SoC ethernet hardware")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/ec4371c4b5a331c5217b5f13a0c9e6c444838e14.1690246066.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230724211905.805665-1-robh@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230724211859.805481-1-robh@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Petr Machata says:

====================
mlxsw: Speed up transceiver module EEPROM dump

Ido Schimmel writes:

Old firmware versions could only read up to 48 bytes from a transceiver
module's EEPROM in one go. Newer versions can read up to 128 bytes,
resulting in fewer transactions.

Query support for the new capability during driver initialization and if
supported, read up to 128 bytes in one go.

This is going to be especially useful for upcoming transceiver module
firmware flashing support.

Before:

 # perf stat -e devlink:devlink_hwmsg -- ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50
 [...]
  Performance counter stats for 'ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50':

                  3      devlink:devlink_hwmsg

After:

 # perf stat -e devlink:devlink_hwmsg -- ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50
 [...]
  Performance counter stats for 'ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50':

                  1      devlink:devlink_hwmsg

Patches #1-#4 are preparations / cleanups.

Patch #5 adds support for the new read size.
====================

Link: https://lore.kernel.org/r/cover.1690281940.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Old firmware versions could only read up to 48 bytes from a transceiver
module's EEPROM in one go. Newer versions can read up to 128 bytes,
resulting in fewer transactions.

Query support for the new capability during driver initialization and if
supported, read up to 128 bytes in one go.

This is going to be especially useful for upcoming transceiver module
firmware flashing support.

Before:

 # perf stat -e devlink:devlink_hwmsg -- ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50
 [...]
  Performance counter stats for 'ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50':

                  3      devlink:devlink_hwmsg

After:

 # perf stat -e devlink:devlink_hwmsg -- ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50
 [...]
  Performance counter stats for 'ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50':

                  1      devlink:devlink_hwmsg
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/99d1618e8cd5acefb2f795dfde1a5b41caa07dcb.1690281940.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The layout of the register always supported 128 bytes payloads, but the
driver defined the register with a shorter length because it uses a
maximum payload size of 48 bytes. Increase the register's length in
preparation for using 128 bytes payloads.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/ba5c0f631e2cfd61bd21218d0cbfe03fbfe521f9.1690281940.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The 'lock' argument is always set to the default value of '0'. Remove it
from the arguments list.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/fb5dd22830622ceeda1c2d6431c27fccd0687aca.1690281940.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

MCAM register reports the device supported management features. Querying
this register exposes if features are supported with the current
firmware version in the current ASIC. Then, the driver can separate
between different implementations dynamically.

MCAM register supports querying whether the MCIA register supports 128
bytes payloads or only 48 bytes. Add support for the register as
preparation for allowing larger MCIA transactions.

Note that the access to the bits in the field 'mng_feature_cap_mask' is
not same to other mask fields in other registers. In most of the cases
bit #0 is the first one in the last dword, in MCAM register, bits #0-#31
are in the first dword and so on. Declare the mask field using bits
arrays per dword to simplify the access.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/1427a3f57ba93db1c5dd4f982bfb31dd5c82356e.1690281940.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The array 'mlxsw_reg_infos' is ordered by registers' IDs. The ID of MPSC
register is 0x9080, so it should be after MCDA (register ID 0x9063) and
not after MTUTC (register ID 0x9055). Note that the register's fields are
defined in the correct place in the file, only the definition in
'mlxsw_reg_infos' is wrong. This issue was found while adding new
register which supposed to be before mpsc.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/c5e270cd5769f301fe81235622215143506e1b48.1690281940.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Each regulator node, which references common regulator.yaml schema,
should disallow additional or unevaluated properties.  Otherwise
mistakes in properties will go unnoticed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230725123711.149230-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The Broadcom ASP 2.0 Ethernet controller is only present on Broadcom STB
SoCs.  Hence add a dependency on ARCH_BRCMSTB, to prevent asking the
user about this driver when configuring a kernel without Broadcom
ARM-based set-top box chipset support.

Fixes: 490cb412 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/1e8b998aa8dcc6e38323e295ee2430b48245cc79.1690299794.git.geert+renesas@glider.beSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Microchip LAN8740/LAN8742 PHYs support basic unicast, broadcast, and
Magic Packet WoL.  They have one pattern filter matching up to 128 bytes
of frame data, which can be used to implement ARP or multicast WoL.

ARP WoL matches any ARP frame with broadcast address.

Multicast WoL matches any multicast frame.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/1690329270-2873-1-git-send-email-Tristram.Ha@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unused HAVE_HW_TIME_STAMP feature define (introduced by
commit ac45f602 ("net: infrastructure for hardware time stamping").
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
ice: switchdev bridge offload

Wojciech Drewek says:

Linux bridge provides ability to learn MAC addresses and vlans
detected on bridge's ports. As a result of this, FDB (forward data base)
entries are created and they can be offloaded to the HW. By adding
VF's port representors to the bridge together with the uplink netdev,
we can learn VF's and link partner's MAC addresses. This is achieved
by slow/exception-path, where packets that do not match any filters
(FDB entries in this case) are send to the bridge ports.

Driver keeps track of the netdevs added to the bridge
by listening for NETDEV_CHANGEUPPER event. We distinguish two types
of bridge ports: uplink port and VF's representor port. Linux
bridge always learns src MAC of the packet on rx path. With the
current slow-path implementation, it means that we will learn
VF's MAC on port repr (when the VF transmits the packet) and
link partner's MAC on uplink (when we receive it on uplink from LAN).

The driver is notified about learning of the MAC/VLAN by
SWITCHDEV_FDB_{ADD|DEL}_TO_DEVICE events. This is followed by creation
of the HW filter. The direction of the filter is based on port
type (uplink or VF repr). In case of the uplink, rule forwards
the packets to the LAN (matching on link partner's MAC). When the
notification is received on VF repr then the rule forwards the
packets to the associated VF (matching on VF's MAC).

This approach would not work on its own however. This is because if
one of the directions is offloaded, then the bridge would not be able
to learn the other one. If the egress rule is added (learned on uplink)
then the response from the VF will be sent directly to the LAN.
The packet will not got through slow-path, it would not be seen on
VF's port repr. Because of that, the bridge would not learn VF's MAC.

This is solved by introducing guard rule. It prevents forward rule from
working until the opposite direction is offloaded.

Aging is not fully supported yet, aging time is static for now. The
follow up submissions will introduce counters that will allow us to
keep track if the rule is actually being used or not.

A few fixes/changes are needed for this feature to work with ice driver.
These are introduced in first 5 patches.
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ice: add tracepoints for the switchdev bridge
  ice: implement static version of ageing
  ice: implement bridge port vlan
  ice: Add VLAN FDB support in switchdev mode
  ice: Add guard rule when creating FDB in switchdev
  ice: Switchdev FDB events support
  ice: Implement basic eswitch bridge setup
  ice: Unset src prune on uplink VSI
  ice: Disable vlan pruning for uplink VSI
  ice: Don't tx before switchdev is fully configured
  ice: Prohibit rx mode change in switchdev mode
  ice: Skip adv rules removal upon switchdev release
====================

Link: https://lore.kernel.org/r/20230724161152.2177196-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The IEEE1588 Standard specifies that the timestamps of Packets must be
captured when the PTP message timestamp point (leading edge of first
octet after the start of frame delimiter) crosses the boundary between
the node and the network. As the MAC latches the timestamp at an
internal point, the captured timestamp must be corrected for the
additional path latency, as described in the publicly available
datasheet [1].

This patch only corrects for the MAC-Internal delay, which can be read
out from the MAC_Ingress_Timestamp_Latency register, since the Phy
framework currently does not support querying the Phy ingress and egress
latency. The Closs Domain Crossing Circuits errors as indicated in [1]
are already being accounted in the stmmac_get_tx_hwtstamp() function and
are not corrected here.

As the Latency varies for different link speeds and MII
modes of operation, the correction value needs to be updated on each
link state change.

As the delay also causes a phase shift in the timestamp counter compared
to the rest of the network, this correction will also reduce phase error
when generating PPS outputs from the timestamp counter.

[1] i.MX8MP Reference Manual, rev.1 Section 11.7.2.5.3 "Timestamp
correction"
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230719-stmmac_correct_mac_delay-v2-1-3366f38ee9a6@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

mdiobus_is_registered_device() doesn't checking that "addr" was valid
before dereferencing bus->mdio_map[]. Extract the code that checks
this from mdiobus_get_phy(), and use it here as well.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1qNxvu-00111m-1V@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The last s390 machine that supported FDDI was z900 ('7th generation',
released in 2000). The oldest machine generation currently supported by
the Linux kernel is MARCH_Z10 (released 2008). If there is still a usecase
for connecting a Linux on s390 instance to a LAN Channel Station (LCS), it
can only do so via Ethernet.

Randy Dunlap[1] found that LCS over FDDI has never worked, when FDDI
was compiled as module. Instead of fixing that, remove the FDDI option
from the lcs driver.

While at it, make the CONFIG_LCS description a bit more helpful.

References:
[1] https://lore.kernel.org/netdev/20230621213742.8245-1-rdunlap@infradead.org/Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230724131546.3597001-1-wintera@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There are currently two paths that call remove_xps_queue():
1. __netif_set_xps_queue -> remove_xps_queue
2. clean_xps_maps -> remove_xps_queue_cpu -> remove_xps_queue
There is no need to check dev_maps in remove_xps_queue() because
dev_maps has been checked on these two paths.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230724023735.2751602-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Leon Romanovsky says:

====================
Support UDP encapsulation in packet offload mode

As was raised by Ilia in this thread [1], the ESP over UDP feature is
supported in packet offload mode. So comes this series, which adds
relevant bits to the mlx5 driver and opens XFRM core code to accept
such configuration.

NAT-T is part of IKEv2 and strongswan uses it automatically [2].

[1] https://lore.kernel.org/all/20230718092405.4124345-1-quic_ilial@quicinc.com
[2] https://wiki.strongswan.org/projects/1/wiki/NatTraversal
====================

Link: https://lore.kernel.org/r/cover.1689757619.git.leon@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Since mlx5 supports UDP encapsulation in packet offload, change the XFRM
core to allow users to configure it.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Extend mlx5 IPsec packet offload to support UDP encapsulation
of IPsec ESP packets.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Set relevant IPsec capability to indicate if flow steering supports UDP
encapsulation and decapsulation of IPsec ESP packets.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Provide an ability to check if flow steering supports UDP
encapsulation and decapsulation of IPsec ESP packets.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Russell King says:

====================
Remove legacy phylink behaviour

This series removes the - as far as I can tell - unreachable code in
mtk_eth_soc that relies upon legacy phylink behaviour, and then removes
the support in phylink for this legacy behaviour.

Patch 1 removes the clocking configuration from mtk_eth_soc for non-
TRGMII, non-serdes based interface modes, and disables those interface
modes prior to phylink configuration.

Patch 2 removes the mac_pcs_get_state() method from mtk_eth_soc which
I believe is also not used - mtk_eth_soc appears not to be used with
SFPs (which would use a kind of in-band mode) nor does any DT appear
to specify in-band mode for any non-serdes based interface mode.

With both of those dealt with, the kernel is now free of any driver
relying on the phylink legacy mode. Therefore, patch 3 removes support
for this.

Finally, with the advent of a new driver being submitted today that
makes use of state->speed in the mac_config() path, patch 4 ensures that
any phylink_link_state member that should not be used in mac_config is
either cleared or set to an invalid value.
====================

Link: https://lore.kernel.org/r/ZLw8DoRskRXLQK37@shell.armlinux.org.ukSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Explicitly invalidate the phylink_link_state structure members in
mac_config that do not contain reliable information for this function,
thereby preventing their future incorrect use.
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Strip out all the pre-March 2020 legacy code from phylink now that the
last user of it is gone.
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Remove the .mac_pcs_get_state function, since as far as I can tell is
never called - no DT appears to specify an in-band-status management
nor SFP support for this driver.

Removal of this, along with the previous patch to remove the incorrect
clocking configuration, means that the driver becomes non-legacy, so
we can remove the "legacy_pre_march2020" status from this driver.
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

MT7623 GMAC0 attempts to configure the system clocking according to the
required speed in the .mac_config callback for non-SGMII, non-baseX and
non-TRGMII modes.

state->speed setting has never been reliable in the .mac_config
callback - there are cases where this is not the link speed,
particularly via ethtool paths, so this has always been unreliable (as
detailed in phylink's documentation.)

There is the additional issue that mtk_gmac0_rgmii_adjust() will only
be called if state->interface changes, which means it only configures
the system clocking on the very first .mac_config call, which will be
made when the network device is first brought up before any link is
established.

Essentially, this code is incredibly buggy, and probably never worked.

Moreover, checking the in-kernel DT files, it seems no platform makes
use of this code path.

Therefore, let's remove it, and disable interface modes for port 0 that
are not SGMII, 1000base-X, 2500base-X or TRGMII on the MT7623.
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

As of today, hardware does not support installing tc filter
rules based on priority. This patch adds support to install
the hardware rules based on priority. The final hardware rules
will not be dependent on rule installation order, it will be strictly
priority based, same as software.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721043925.2627806-1-sumang@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The MPTCP code uses the assumption that the tcp_win_from_space() helper
does not use any TCP-specific field, and thus works correctly operating
on an MPTCP socket.

The commit dfa2f048 ("tcp: get rid of sysctl_tcp_adv_win_scale")
broke such assumption, and as a consequence most MPTCP connections stall
on zero-window event due to auto-tuning changing the rcv buffer size
quite randomly.

Address the issue syncing again the MPTCP auto-tuning code with the TCP
one. To achieve that, factor out the windows size logic in socket
independent helpers, and reuse them in mptcp_rcv_space_adjust(). The
MPTCP level scaling_ratio is selected as the minimum one from the all
the subflows, as a worst-case estimate.

Fixes: dfa2f048 ("tcp: get rid of sysctl_tcp_adv_win_scale")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20230720-upstream-net-next-20230720-mptcp-fix-rcv-buffer-auto-tuning-v1-1-175ef12b8380@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Replace kstrtoint() by kstrtobool() in the sysfs _store() functions.
This improves the user usability and simplify the code.

With this fix, it is now possible to use [YyNn] to set and unset a
feature. Old behaviour is still unchanged.

kstrtobool() is also safer and doesn't need the extra validation that
is required when converting a string to bool (end field in the struct),
which makes the code simpler.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721092146.4036622-2-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

According to the sysfs.rst documentation, _show() functions should only
use sysfs_emit() instead of snprintf().

Since snprintf() shouldn't be used in the sysfs _show() path, replace it
by sysfs_emit().
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721092146.4036622-1-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cited commit under 'Fixes' tag introduced new member to struct
net_device without providing description of it - fix it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20230720141613.61488b9e@canb.auug.org.au/
Fixes: 13ce2daa ("xsk: add new netlink attribute dedicated for ZC max frags")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Simon Horman <simon.horman@corigine.com> # build-tested
Link: https://lore.kernel.org/r/20230721145808.596298-1-maciej.fijalkowski@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On qdisc destruction, the ingress_destroy() needs to update the correct
entry, that is, tcx_entry_update must NULL the dev->tcx_ingress pointer.
Therefore, fix the typo.

Fixes: e420bed0 ("bpf: Add fd-based tcx multi-prog infra with link support")
Reported-by: syzbot+bdcf141f362ef83335cf@syzkaller.appspotmail.com
Reported-by: syzbot+b202b7208664142954fa@syzkaller.appspotmail.com
Reported-by: syzbot+14736e249bce46091c18@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+bdcf141f362ef83335cf@syzkaller.appspotmail.com
Tested-by: syzbot+b202b7208664142954fa@syzkaller.appspotmail.com
Tested-by: syzbot+14736e249bce46091c18@syzkaller.appspotmail.com
Tested-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20230721233330.5678-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add tracepoints for the following events:
- Add FDB entry
- Delete FDB entry
- Create bridge VLAN
- Cleanup bridge VLAN
- Link port to the bridge
- Unlink port from the bridge
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Remove fdb entries always when ageing time expired.

Allow user to set ageing time using port object attribute.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Port VLAN in this case means push and pop VLAN action on specific vid.
There are a few limitation in hardware:
- push and pop can't be used separately
- if port VLAN is used there can't be any trunk VLANs, because pop
  action is done on all traffic received by VSI in port VLAN mode
- port VLAN mode on uplink port isn't supported

Reflect these limitations in code using dev_info to inform the user
about unsupported configuration.

In bridge mode there is a need to configure port vlan without resetting
VFs. To do that implement ice_port_vlan_on/off() functions. They are
only configuring correct vlan_ops to allow setting port vlan.

We also need to clear port vlan without resetting the VF which is not
supported right now. Change it by implementing clear_port_vlan ops.
As previous VLAN configuration isn't always the same, store current
config while creating port vlan and restore it in clear function.

Configuration steps:
- configure switchdev with bridge
- #bridge vlan add dev eth0 vid 120 pvid untagged
- #bridge vlan add dev eth1 vid 120 pvid untagged
- ping from VF0 to VF1
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>