- 26 Jul, 2019 40 commits
-
-
David S. Miller authored
[ Upstream commit 621ccc6c ] Rename _P to _P_VAL and _R to _R_VAL to avoid global namespace conflicts: drivers/media/dvb-frontends/tua6100.c: In function ‘tua6100_set_params’: drivers/media/dvb-frontends/tua6100.c:79: warning: "_P" redefined #define _P 32 In file included from ./include/acpi/platform/aclinux.h:54, from ./include/acpi/platform/acenv.h:152, from ./include/acpi/acpi.h:22, from ./include/linux/acpi.h:34, from ./include/linux/i2c.h:17, from drivers/media/dvb-frontends/tua6100.h:30, from drivers/media/dvb-frontends/tua6100.c:32: ./include/linux/ctype.h:14: note: this is the location of the previous definition #define _P 0x10 /* punct */ Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe Leroy authored
[ Upstream commit c9cca703 ] The MPC885 reference manual states: SEC Lite-initiated 8xx writes can occur only on 32-bit-word boundaries, but reads can occur on any byte boundary. Writing back a header read from a non-32-bit-word boundary will yield unpredictable results. In order to ensure that, cra_alignmask is set to 3 for SEC1. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 9c4a7965 ("crypto: talitos - Freescale integrated security engine (SEC) driver") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit eae55a58 ] The driver assumes that the ICV is as a single piece in the last element of the scatterlist. This assumption is wrong. This patch ensures that the ICV is properly handled regardless of the scatterlist layout. Fixes: 9c4a7965 ("crypto: talitos - Freescale integrated security engine (SEC) driver") Signed-off-by:
-
Ioana Ciornei authored
[ Upstream commit 82c76aca ] In general, we don't want MAC drivers calling phy_attach_direct with the net_device being NULL. Add checks against this in all the functions calling it: phy_attach() and phy_connect_direct(). Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Shailendra Verma authored
[ Upstream commit 6995a659 ] Fix to avoid possible memory leak if the decoder initialization got failed.Free the allocated memory for file handle object before return in case decoder initialization fails. Signed-off-by:
Shailendra Verma <shailendra.v@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Kefeng Wang authored
[ Upstream commit 50710eee ] if saa7164_proc_create() fails, saa7164_fini() will trigger a warning, name 'saa7164' WARNING: CPU: 1 PID: 6311 at fs/proc/generic.c:672 remove_proc_entry+0x1e8/0x3a0 ? remove_proc_entry+0x1e8/0x3a0 ? try_stop_module+0x7b/0x240 ? proc_readdir+0x70/0x70 ? rcu_read_lock_sched_held+0xd7/0x100 saa7164_fini+0x13/0x1f [saa7164] __x64_sys_delete_module+0x30c/0x480 ? __ia32_sys_delete_module+0x480/0x480 ? __x64_sys_clock_gettime+0x11e/0x1c0 ? __x64_sys_timer_create+0x1a0/0x1a0 ? trace_hardirqs_off_caller+0x40/0x180 ? do_syscall_64+0x18/0x450 do_syscall_64+0x9f/0x450 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix it by checking the return of proc_create_single() before calling remove_proc_entry(). Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: use 0444 instead of S_IRUGO] [hverkuil-cisco@xs4all.nl: use pr_info instead of KERN_INFO] Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit 518fa4e0 ] You can't memset the contents of a __user pointer. Instead, call copy_to_user to copy links.reserved (which is zeroed) to the user memory. This fixes this sparse warning: SPARSE:drivers/media/mc/mc-device.c drivers/media/mc/mc-device.c:521:16: warning: incorrect type in argument 1 (different address spaces) Fixes: f4930887 ("media: media_device_enum_links32: clean a reserved field") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit da201963 ] Some compilers will complain when using a member of a struct to initialize another member, in the same struct initialization. For instance: debian:8 Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0) oraclelinux:7 clang version 3.4.2 (tags/RELEASE_34/dot2-final) Produce: ui/browsers/annotate.c:104:12: error: variable 'ops' is uninitialized when used within its own initialization [-Werror,-Wuninitialized] (!ops.current_entry || ^~~ 1 error generated. So use an extra variable, initialized just before that struct, to have the value used in the expressions used to init two of the struct members. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: c298304b ("perf annotate: Use a ops table for annotation_line__write()") Link: https://lkml.kernel.org/n/tip-f9nexro58q62l3o9hez8hr0i@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Vandana BN authored
[ Upstream commit 5d2e73a5 ] SyzKaller hit the null pointer deref while reading from uninitialized udev->product in zr364xx_vidioc_querycap(). ================================================================== BUG: KASAN: null-ptr-deref in read_word_at_a_time+0xe/0x20 include/linux/compiler.h:274 Read of size 1 at addr 0000000000000000 by task v4l_id/5287 CPU: 1 PID: 5287 Comm: v4l_id Not tainted 5.1.0-rc3-319004-g43151d6 #6 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 kasan_report.cold+0x5/0x3c mm/kasan/report.c:321 read_word_at_a_time+0xe/0x20 include/linux/compiler.h:274 strscpy+0x8a/0x280 lib/string.c:207 zr364xx_vidioc_querycap+0xb5/0x210 drivers/media/usb/zr364xx/zr364xx.c:706 v4l_querycap+0x12b/0x340 drivers/media/v4l2-core/v4l2-ioctl.c:1062 __video_do_ioctl+0x5bb/0xb40 drivers/media/v4l2-core/v4l2-ioctl.c:2874 video_usercopy+0x44e/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3056 v4l2_ioctl+0x14e/0x1a0 drivers/media/v4l2-core/v4l2-dev.c:364 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xced/0x12f0 fs/ioctl.c:696 ksys_ioctl+0xa0/0xc0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:718 do_syscall_64+0xcf/0x4f0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f3b56d8b347 Code: 90 90 90 48 8b 05 f1 fa 2a 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 90 90 90 90 90 90 90 90 90 90 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c1 fa 2a 00 31 d2 48 29 c2 64 RSP: 002b:00007ffe005d5d68 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f3b56d8b347 RDX: 00007ffe005d5d70 RSI: 0000000080685600 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400884 R13: 00007ffe005d5ec0 R14: 0000000000000000 R15: 0000000000000000 ================================================================== For this device udev->product is not initialized and accessing it causes a NULL pointer deref. The fix is to check for NULL before strscpy() and copy empty string, if product is NULL Reported-by: syzbot+66010012fd4c531a1a96@syzkaller.appspotmail.com Signed-off-by:
Vandana BN <bnvandana@gmail.com> Signed-off-by:
-
Eric Biggers authored
[ Upstream commit eeacfdc6 ] Replace some BUG_ON()s with WARN_ON_ONCE() and returning an error code, and move the check for len divisible by FS_CRYPTO_BLOCK_SIZE into fscrypt_crypt_block() so that it's done for both encryption and decryption, not just encryption. Reviewed-by:
Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
sumitg authored
[ Upstream commit 3e0f7243 ] Fixing use-after-free within __v4l2_ctrl_handler_setup(). Memory is being freed with kfree(new_ref) for duplicate control reference entry but ctrl->cluster pointer is still referring to freed duplicate entry resulting in error on access. Change done to update cluster pointer only when new control reference is added. ================================================================== BUG: KASAN: use-after-free in __v4l2_ctrl_handler_setup+0x388/0x428 Read of size 8 at addr ffffffc324e78618 by task systemd-udevd/312 Allocated by task 312: Freed by task 312: The buggy address belongs to the object at ffffffc324e78600 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 24 bytes inside of 64-byte region [ffffffc324e78600, ffffffc324e78640) The buggy address belongs to the page: page:ffffffbf0c939e00 count:1 mapcount:0 mapping: (null) index:0xffffffc324e78f80 flags: 0x4000000000000100(slab) raw: 4000000000000100 0000000000000000 ffffffc324e78f80 000000018020001a raw: 0000000000000000 0000000100000001 ffffffc37040fb80 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffc324e78500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffffffc324e78580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffffffc324e78600: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffffffc324e78680: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffffffc324e78700: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc ================================================================== Suggested-by:
Sumit Gupta <sumitg@nvidia.com> Signed-off-by:
-
Kefeng Wang authored
[ Upstream commit 20059cbb ] vim2m_device_release() will be called by video_unregister_device() to release various objects. There are two double-free issue, 1. dev->m2m_dev will be freed twice in error_m2m path/vim2m_device_release 2. the error_v4l2 and error_free path in vim2m_probe() will release same objects, since vim2m_device_release has done. Fixes: ea6c7e34 ("media: vim2m: replace devm_kzalloc by kzalloc") Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
-
Anirudh Gupta authored
[ Upstream commit b38ff407 ] Family of src/dst can be different from family of selector src/dst. Use xfrm selector family to validate address prefix length, while verifying new sa from userspace. Validated patch with this command: ip xfrm state add src 1.1.6.1 dst 1.1.6.2 proto esp spi 4260196 \ reqid 20004 mode tunnel aead "rfc4106(gcm(aes))" \ 0x1111016400000000000000000000000044440001 128 \ sel src 1011:1:4::2/128 sel dst 1021:1:4::2/128 dev Port5 Fixes: 07bf7908 ("xfrm: Validate address prefix lengths in the xfrm selector.") Signed-off-by:
Anirudh Gupta <anirudh.gupta@sophos.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Jeremy Sowden authored
[ Upstream commit 7c80eb1c ] In both functions, if pfkey_xfrm_policy2msg failed we leaked the newly allocated sk_buff. Free it on error. Fixes: 55569ce2 ("Fix conversion between IPSEC_MODE_xxx and XFRM_MODE_xxx.") Reported-by: syzbot+4f0529365f7f2208d9f0@syzkaller.appspotmail.com Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit f9070dc9 ] The locking in force_sig_info is not prepared to deal with a task that exits or execs (as sighand may change). The is not a locking problem in force_sig as force_sig is only built to handle synchronous exceptions. Further the function force_sig_info changes the signal state if the signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the delivery of the signal. The signal SIGKILL can not be ignored and can not be blocked and SIGNAL_UNKILLABLE won't prevent it from being delivered. So using force_sig rather than send_sig for SIGKILL is confusing and pointless. Because it won't impact the sending of the signal and and because using force_sig is wrong, replace force_sig with send_sig. Cc: Daniel Lezcano <daniel.lezcano@free.fr> Cc: Serge Hallyn <serge@hallyn.com> Cc: Oleg Nesterov <oleg@redhat.com> Fixes: cf3f8921 ("pidns: add reboot_pid_ns() to handle the reboot syscall") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Michal Kalderon authored
[ Upstream commit 8366d520 ] In 100g mode the doorbell bar is united for both engines. Set the correct offset in the hwfn so that the doorbell returned for RoCE is in the affined hwfn. Signed-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Denis Bolotin <denis.bolotin@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Jian Shen authored
[ Upstream commit ffab9691 ] Allocate CPU rmap and add entry for each irq. CPU rmap is used in aRFS to get the queue number of the rx completion interrupts. In additional, remove the calling of irq_set_affinity_notifier() in hns3_nic_init_irq(), because we have registered notifier in irq_cpu_rmap_add() for each vector, otherwise it may cause use-after-free issue. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit a976ca79 ] When we trigger NAPI we are disabling interrupts but in case we receive or send a packet in the meantime, as interrupts are disabled, we will miss this event. Trigger both NAPI instances (RX and TX) when at least one event happens so that we don't miss any interrupts. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 0620ec6c ] In case we don't use a given address entry we need to clear it because it could contain previous values that are no longer valid. Found out while running stmmac selftests. Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 9463c445 ] In case we don't use a given address entry we need to clear it because it could contain previous values that are no longer valid. Found out while running stmmac selftests. Signed-off-by:
-
Horia Geantă authored
[ Upstream commit dcd9c76e ] When enabling IOMMU support, the following issue becomes visible in the AEAD zero-length case. Even though the output sequence length is set to zero, the crypto engine tries to prefetch 4 S/G table entries (since SGF bit is set in SEQ OUT PTR command - which is either generated in SW in case of caam/jr or in HW in case of caam/qi, caam/qi2). The DMA read operation will trigger an IOMMU fault since the address in the SEQ OUT PTR is "dummy" (set to zero / not obtained via DMA API mapping). 1. In case of caam/jr, avoid the IOMMU fault by clearing the SGF bit in SEQ OUT PTR command. 2. In case of caam/qi - setting address, bpid, length to zero for output entry in the compound frame has a special meaning (cf. CAAM RM): "Output frame = Unspecified, Input address = Y. A unspecified frame is indicated by an unused SGT entry (an entry in which the Address, Length, and BPID fields are all zero). SEC obtains output buffers from BMan as prescribed by the preheader." Since no output buffers are needed, modify the preheader by setting (ABS = 1, ADDBUF = 0): -"ABS = 1 means obtain the number of buffers in ADDBUF (0 or 1) from the pool POOL ID" -ADDBUF: "If ABS is set, ADD BUF specifies whether to allocate a buffer or not" 3. In case of caam/qi2, since engine: -does not support FLE[FMT]=2'b11 ("unused" entry) mentioned in DPAA2 RM -requires output entry to be present, even if not used the solution chosen is to leave output frame list entry zeroized. Fixes: 763069ba ("crypto: caam - handle zero-length AEAD output") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 2c41cc0b ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/media/platform/qcom/venus/firmware.c:90:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 82, but without a corresponding object release within this function. drivers/media/platform/qcom/venus/firmware.c:94:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 82, but without a corresponding object release within this function. drivers/media/platform/qcom/venus/firmware.c:128:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 82, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Acked-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Jungo Lin authored
[ Upstream commit f4930887 ] In v4l2-compliance utility, test MEDIA_IOC_ENUM_ENTITIES will check whether reserved field of media_links_enum filled with zero. However, for 32 bit program, the reserved field is missing copy from kernel space to user space in media_device_enum_links32 function. This patch adds the cleaning a reserved field logic in media_device_enum_links32 function. Signed-off-by:
Jungo Lin <jungo.lin@mediatek.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit e08f0761 ] In case ioremap fails, the fix returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit 0c7aa329 ] The commit d790b7ed ("[media] vb2-dma-sg: move dma_(un)map_sg here") left dma_desc_nent unset. It previously contained the number of DMA descriptors as returned from dma_map_sg(). We can now (since the commit referred to above) obtain the same value from the sg_table and drop dma_desc_nent altogether. Tested on OLPC XO-1.75 machine. Doesn't affect the OLPC XO-1's Cafe driver, since that one doesn't do DMA. [mchehab+samsung@kernel.org: fix a checkpatch warning] Fixes: d790b7ed ("[media] vb2-dma-sg: move dma_(un)map_sg here") Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Akinobu Mita authored
[ Upstream commit 6e4ab830 ] If the requested framesize by VIDIOC_SUBDEV_S_FMT is larger than supported framesizes, it causes an out of bounds array access and the resulting framesize is unexpected. Avoid out of bounds array access and select the default framesize. Cc: Wenyou Yang <wenyou.yang@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit 3e03e792 ] Selftests report the following: [ 2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place" [ 2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41 [ 3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place" [ 3.043185] 00000000: fe dc ba 98 76 54 32 10 [ 3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place" [ 3.073818] 00000000: 7d 33 88 93 0f 93 b2 42 This above dumps show that the actual output IV is indeed the input IV. This is due to the IV not being copied back into the request. This patch fixes that. Signed-off-by:
-
Daniel Gomez authored
[ Upstream commit 24e4cf77 ] MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT OF mathing mechanism and register it. Before this patch: modinfo drivers/media/rc/ir-spi.ko | grep alias After this patch: modinfo drivers/media/rc/ir-spi.ko | grep alias alias: of:N*T*Cir-spi-ledC* alias: of:N*T*Cir-spi-led Reported-by:
Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by:
Daniel Gomez <dagmcr@gmail.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 6cf97230 ] dvb_usb_device_exit() frees and uses the device name in that order. Fix by storing the name in a buffer before freeing it. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+26ec41e9f788b3eba396@syzkaller.appspotmail.com Signed-off-by:
-
Jeremy Sowden authored
[ Upstream commit 17f78dd1 ] A handler for BATADV_TVLV_ROAM was being registered when the translation-table was initialized, but not unregistered when the translation-table was freed. Unregister it. Fixes: 122edaa0 ("batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packets") Reported-by: syzbot+d454a826e670502484b8@syzkaller.appspotmail.com Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Daniel Baluta authored
[ Upstream commit 2899872b ] As detected by kmemleak running on i.MX6ULL board: nreferenced object 0xd8366600 (size 64): comm "swapper/0", pid 1, jiffies 4294937370 (age 933.220s) hex dump (first 32 bytes): 64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72 dummy-iomuxc-gpr 40 32 30 65 34 30 30 30 00 e3 f3 ab fe d1 1b dd @20e4000........ backtrace: [<b0402aec>] kasprintf+0x2c/0x54 [<a6fbad2c>] regmap_debugfs_init+0x7c/0x31c [<9c8d91fa>] __regmap_init+0xb5c/0xcf4 [<5b1c3d2a>] of_syscon_register+0x164/0x2c4 [<596a5d80>] syscon_node_to_regmap+0x64/0x90 [<49bd597b>] imx6ul_init_machine+0x34/0xa0 [<250a4dac>] customize_machine+0x1c/0x30 [<2d19fdaf>] do_one_initcall+0x7c/0x398 [<e6084469>] kernel_init_freeable+0x328/0x448 [<168c9101>] kernel_init+0x8/0x114 [<913268aa>] ret_from_fork+0x14/0x20 [<ce7b131a>] 0x0 Root cause is that map->debugfs_name is allocated using kasprintf and then the pointer is lost by assigning it other memory address. Reported-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Rakesh Pillai authored
[ Upstream commit 42f1bc43 ] Currently the protected management frames are not appended with the MIC_LEN which results in the protected management frames being encoded incorrectly. Add the extra space at the end of the protected management frames to fix this encoding error for the protected management frames. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: 1807da49 ("ath10k: wmi: add management tx by reference support over wmi") Signed-off-by:
Rakesh Pillai <pillair@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Anilkumar Kolli authored
[ Upstream commit d8792393 ] Increase pulse width range from 1-2usec to 0-4usec. During data traffic HW occasionally fails detecting radar pulses, so that SW cannot get enough radar reports to achieve the success rate. Tested ath10k hw and fw: * QCA9888(10.4-3.5.1-00052) * QCA4019(10.4-3.2.1.1-00017) * QCA9984(10.4-3.6-00104) * QCA988X(10.2.4-1.0-00041) Tested ath9k hw: AR9300 Tested-by:
Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by:
Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by:
-
Maya Erez authored
[ Upstream commit e10b0edd ] Interrupt is set in ICM (ICR & ~IMV) rising trigger. As the driver masks the IRQ after clearing it, there can be a race where an additional spurious interrupt is triggered when the driver unmask the IRQ. This can happen in case HW triggers an interrupt after the clear and before the mask. To prevent the second spurious interrupt the driver needs to mask the IRQ before reading and clearing it. Signed-off-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
-
Wen Gong authored
[ Upstream commit 49ed34b8 ] For some SDIO chip, the peer id is 65535 for MPDU with error status, then test_bit will trigger buffer overflow for peer's memory, if kasan enabled, it will report error. Reason is when station is in disconnecting status, firmware do not delete the peer info since it not disconnected completely, meanwhile some AP will still send data packet to station, then hardware will receive the packet and send to firmware, firmware's logic will report peer id of 65535 for MPDU with error status. Add check for overflow the size of peer's peer_ids will avoid the buffer overflow access. Call trace of kasan: dump_backtrace+0x0/0x2ec show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xc8/0xec print_address_description+0x74/0x240 kasan_report+0x250/0x26c __asan_report_load8_noabort+0x20/0x2c ath10k_peer_find_by_id+0x180/0x1e4 [ath10k_core] ath10k_htt_t2h_msg_handler+0x100c/0x2fd4 [ath10k_core] ath10k_htt_htc_t2h_msg_handler+0x20/0x34 [ath10k_core] ath10k_sdio_irq_handler+0xcc8/0x1678 [ath10k_sdio] process_sdio_pending_irqs+0xec/0x370 sdio_run_irqs+0x68/0xe4 sdio_irq_work+0x1c/0x28 process_one_work+0x3d8/0x8b0 worker_thread+0x508/0x7cc kthread+0x24c/0x264 ret_from_fork+0x10/0x18 Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Signed-off-by:
Wen Gong <wgong@codeaurora.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 5d6751ea ] The "ev->traffic_class" and "reply->ac" variables come from the network and they're used as an offset into the wmi->stream_exist_for_ac[] array. Those variables are u8 so they can be 0-255 but the stream_exist_for_ac[] array only has WMM_NUM_AC (4) elements. We need to add a couple bounds checks to prevent array overflows. I also modified one existing check from "if (traffic_class > 3) {" to "if (traffic_class >= WMM_NUM_AC) {" just to make them all consistent. Fixes: bdcd8170 (" Add ath6kl cleaned up driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Maya Erez authored
[ Upstream commit 7441be71 ] When MISC interrupt is triggered due to HALP bit, in parallel to mbox events handling by the MISC threaded IRQ, new mbox interrupt can be missed in the following scenario: 1. MISC ICR is read in the IRQ handler 2. Threaded IRQ is completed and all MISC interrupts are unmasked 3. mbox interrupt is set by FW 4. HALP is masked The mbox interrupt in step 3 can be missed due to constant high level of ICM. Masking all MISC IRQs instead of masking only HALP bit in step 4 will guarantee that ICM will drop to 0 and interrupt will be triggered once MISC interrupts will be unmasked. Signed-off-by:
-
Surabhi Vishnoi authored
[ Upstream commit 9280f4fc ] The enum value for WMI_TLV_STAT_PDEV, WMI_TLV_STAT_VDEV and WMI_TLV_STAT_PEER is wrong, due to which the vdev stats are not received from firmware in wmi_update_stats event. Fix the enum values for above stats to receive all stats from firmware in WMI_TLV_UPDATE_STATS_EVENTID. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: f40a307e ("ath10k: Fill rx duration for each peer in fw_stats for WCN3990) Signed-off-by:
Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by:
-
Tim Schumacher authored
[ Upstream commit 2f90c7e5 ] Right now, if an error is encountered during the SREV register read (i.e. an EIO in ath9k_regread()), that error code gets passed all the way to __ath9k_hw_init(), where it is visible during the "Chip rev not supported" message. ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits ath: phy2: Mac Chip Rev 0x0f.3 is not supported by this driver ath: phy2: Unable to initialize hardware; initialization status: -95 ath: phy2: Unable to initialize hardware; initialization status: -95 ath9k_htc: Failed to initialize the device Check for -EIO explicitly in ath9k_hw_read_revisions() and return a boolean based on the success of the operation. Check for that in __ath9k_hw_init() and abort with a more debugging-friendly message if reading the revisions wasn't successful. ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits ath: phy2: Failed to read SREV register ath: phy2: Could not read hardware revision ath: phy2: Unable to initialize hardware; initialization status: -95 ath: phy2: Unable to initialize hardware; initialization status: -95 ath9k_htc: Failed to initialize the device This helps when debugging by directly showing the first point of failure and it could prevent possible errors if a 0x0f.3 revision is ever supported. Signed-off-by:
Tim Schumacher <timschumi@gmx.de> Signed-off-by:
-
Emil Renner Berthing authored
[ Upstream commit 47300728 ] This fixes tx and bi-directional dma transfers on rk3399-gru-kevin. It seems the SPI fifo must have room for 2 bursts when the dma_tx_req signal is generated or it might skip some words. This in turn makes the rx dma channel never complete for bi-directional transfers. Fix it by setting tx burst length to fifo_len / 4 and the dma watermark to fifo_len / 2. However the rk3399 TRM says (sic): "DMAC support incrementing-address burst and fixed-address burst. But in the case of access SPI and UART at byte or halfword size, DMAC only support fixed-address burst and the address must be aligned to word." So this relies on fifo_len being a multiple of 16 such that the burst length (= fifo_len / 4) is a multiple of 4 and the addresses will be word-aligned. Fixes: dcfc861d ("spi: rockchip: adjust dma watermark and burstlen") Signed-off-by:
Emil Renner Berthing <kernel@esmil.dk> Signed-off-by:
-
