gb_connection_disable_rx() fn is required to be used by other modules
(e.g. bridged-phy drivers) and so export it.

Testing Done: Tested on gbsim.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In order to help bridged-phy drivers to define init()/exit()
functions, define helper macro in gpbridge.h file.

Testing Done: Tested on gbsim.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This creates a gpbridge "bus" that will be used to create devices that
are the bridged phy devices that correspond to the protocols being
implemented.

Testing Done: Tested on gbsim.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
[vaibhav.hiremath@linaro.org: 1.Changed code to retain init/exit fns of
drivers. 2.Exit path fix. 3. Fixed review comments]
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This reverts commit b957ade7b3e4ab8c149c53346dbf02e977b7f3a7.

The interface version is now managed as part of the firmware-management
protocol. This operation is already removed from the greybus
specifications.

Drop interface version support from greybus.

Tested with gbsim (sysfs file not available after this patch).
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Acked-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Function gb_audio_manager_remove_all() to remove all audio modules,
doesn't control correctly 'ida' counting.
Signed-off-by: Dinko Mironov <dmironov@mm-sol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

SW-4894, SW-4389, and share a common root cause, namely that
the power-on reset configuration of the APBridgeA-Switch link of PWM
Gear 1, 1 Lane, Slow Auto, is insufficient to handle some required
traffic loads, such as 3 audio streams plus boot-over-UniPro or 4 audio
streams.

The correct long-term solution is to implement a UniPro Power Mode
Manager as in that considers the demands placed on the network,
and adjusts power modes accordingly.

The present commit implements a short-term, brute-force hack to allow
continued system testing:
- Upon receiving an SVC HELLO request, schedule deferred work to
  reconfigure the APB1-Switch link to PWM G2, 1 lane, Slow Auto
- When the Camera driver transitions a White Camera module from active to
  inactive, return the APB1-Switch link to PWM G2, 1 lane, Slow Auto

The Camera driver already steps up the APBridgeA-Camera link speed while a
camera module is active, which affords sufficient margin for simultaneous
audio and hotplug activity, and the Camera driver already steps down the
link speed thereafter: the change made by the present patch is simply to
tweak the stepped-down power mode to match the new baseline configuration.
Signed-off-by: Mitchell Tasman <tasman@leaflabs.com>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The new ctrl device under interface is missing a MODULE uevent var,
add it.

Testing Done:
cat 'uevent' from ctrl device.
$ cat 1-3.3.ctrl/uevent
DEVTYPE=greybus_control
BUS=1
MODULE=3
INTERFACE=3
GREYBUS_ID=fffe0001/ffee0011
Signed-off-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Its possible that the Module may fail to download the next stage
firmware, or to jump into it and boot into the new personality.

We have already seen examples of both of these cases on EVT 1.5.

This patch implements timeouts in the bootrom bundle driver, which now
expects the next request from the Module to be received at the AP within
1 second of the previous request/response. The time interval can be
increased later if required.

The timeouts are added between:
- AP_READY and FIRMWARE_SIZE operations
- FIRMWARE_SIZE and GET_FIRMWARE operations
- Two GET_FIRMWARE operations
- GET_FIRMWARE and READY_TO_BOOT operations
- READY_TO_BOOT operation and the call to the ->disconnect() event of
  the bootrom bundle (once the new hotplug request is received).

The timeout for the last case is kept at 5 seconds right now (random
value), as it may take a bit longer.

Because 'bootrom->fw' can be accessed simultaneously (from timeout
handler and incoming requests) and one of them can potentially free the
'->fw' structure, a mutex is also added to take care of such races while
accessing 'bootrom->fw' structure.

Also note that the '!bootrom->fw' check is moved to free_firmware()
routine.

Tested on EVT 1.5, by faking errors on certain requests, so that the
bootrom doesn't send any more requests. Normal case is working just
fine for audio and GP modules.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Use standard API greybus_set_drvdata() while setting private
data pointers for mgmt & data connection.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Earlier codec->lock protects almost complete register/unregister
module function. This can be reduced to specific operations.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Modify sequence of register_module & unregister_module in bundle
driver. This would affect the uevent generated for above user
space. Accordingly, we need to modify snd_soc_xxx sequence in
register_module() in codec driver.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Each module maintains connected status & a lock to protect it.
Using codec->lock we can safely serialize ASoC specific callbacks
(in response to mixer_ctl update or dai_ops) and gb module
disconnect. Thus is_connected field can be removed.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove unnecessary lock & list maintained in GB audio bundle
driver
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

read/write_lock_irqsave mechanism was used to protect modules
list & kobject_xxx() in gb_audio_manager. Since kobject_xxx calls
can sleep spin_lock variants can't be used there. So use rw_sem
for protecting modules_list.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Create a macro representing the length of the firmware file's name and
use that instead of using magic number in the code.
Suggested-by: Greg Kroah-Hartman <gregkh@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch adds Firmware Download Protocol support to firmware core,
which allows an Interface to download a firmware package over Unipro.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jun Li <li_jun@projectara.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The invalid request type has been redefined as 0x7f.

Also remove the redundant redefinition of the invalid type from the
operation header.

Note that operation type 0x00 has been repurposed for the new generic
ping operation, which will be used to implement proper connection tear
down.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Define the SVC version request, which need not need to stay the same as
the legacy version request.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove the unsupported version request from the loopback-driver request
handler.

Unsupported requests are already handled and logged using the default
case.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Implement the unidirectional mode-switch operation.

This operation will be used in the implementation of the new generic
mode-switch functionality.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add helper functions for initiating unidirectional operations and
waiting for them to have been acknowledged as sent by the host device.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add support for initiating unidirectional operations, that is, sending
requests that do not require responses.

Note that we already handle incoming unidirectional operations.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Fix and update gb_operation_request_send() documentation and add
kernel-doc formatting.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Update the function name, which has gained a timeout suffix.

Also fix the kernel-doc formatting.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove unused function prototype that was left after a recent change.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

correct sysfs paths typo. (s/device/devices).
Signed-off-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add description for greybus host device bus_id attribute
Signed-off-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The greybus host device id can only be read by parsing the uevent if one
wants to identify a specific host device 'or' bus. This is 'lsgb' uses
today.

This change adds a bus_id attribute so libraries can identify multiple
host devices 'or' bus if they exist.

Testing Done:
Tested on Arche,
'cat /sys/bus/greybus/devices/greysbus1/bus_id'
Signed-off-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

A recent commit inadvertently disabled E2EFC on all interface
connections, due to a failure to clear the ES3 bootrom quirk flags
during mode switch.

Testing Done: Verified that the CPort flags are again set to 0x7 for
non-bootrom interface connections.

Fixes: 5b638080e94e ("svc: keep interfaces registered during
mode switch")
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

All firmware packages on the Modules or Interfaces are now managed by a
special Firmware Management Protocol. The Interface Manifest shall
at least contain the Firmware Management Bundle and a Firmware
Management Protocol CPort within it.

The bundle may contain additional CPorts based on the extra
functionality required to manage firmware packages.

For example, this is how the Firmware Management Bundle of the Interface
Manifest may look like:

	; Firmware Management Bundle (Bundle 1):
	[bundle-descriptor 1]
	class = 0x16

	; (Mandatory) Firmware Management Protocol on CPort 1
	[cport-descriptor 1]
	bundle = 1
	protocol = 0x18

	; (Optional) Firmware Download Protocol on CPort 2
	[cport-descriptor 2]
	bundle = 1
	protocol = 0x17

	; (Optional) SPI protocol on CPort 3
	[cport-descriptor 3]
	bundle = 1
	protocol = 0x0b

	; (Optional) Component Authentication Protocol (CAP) on CPort 4
	[cport-descriptor 4]
	bundle = 1
	protocol = 0xXX //TBD

This patch adds the basic firmware-management bundle driver, which just
creates a firmware-management connection. Support for individual
protocols will be added separately.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Originally, idea was to use widget_type to identify jack_type.
However, suggestive way is to identify jack based on jack
attributes.

Changes already exists in codec FW to report jack attributes.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This fields actually populates jack attribute. Thus, renamed to
reflect the real purpose.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

gb_activate_tx/rx is triggered from _prepare() & gb_deactivate
from shutdown(). This may cause protocol error in case shutdown
executes without _prepare due to some hw_params failure.

Also, reorganise _prepare & _shutdown calls to make it more
readable & cleaner.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Update Makefile in response to SND_SOC_DYNAMIC_DAILINK cflag
removal.

Update files for msm-dynamic-dailink.h header file removal.

Update in response to API name changes. Also, acquire sound card
controls_rwsem before adding kcontrols to avoid deadlock.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We missed this only for bundle device, fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For every time SVC instance is created, memories for storing the rail IDs
are allocated, however, they are not freed when the SVC is destroyed.
This patch fixes the memory leak by freeing the memory when debugfs for
SVC is no longer needed.

Testing Done:
- Check pwrmon debugfs after turning on and off SVC
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The power rail names and counts are unnecessarily stored in the gb_svc
structure once the SVC created, this causes waste of memory usage. This
patch removes rail names and rail counts storage from th gb_svc
structure.

Testing Done:
- Validated the readings from /d/greybus/1-svc/pwrmon/*
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Implement the new interface mailbox-event operation.

The event is sent by the SVC under certain conditions when an interface
updates its mailbox value. Specifically, this event will be used to
implement the new mode-switch functionality.

Upon reception the AP verifies that the interface is known and that the
mailbox has the expected MAILBOX_GREYBUS value. If so, the interface is
disabled before being re-enabled (re-enumerated).

Note that during mode-switch, the interface will typically already be in
a disabled state when the mailbox is written (with the ES3 bootrom being
the notable exception).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Implement the new module inserted and removed operations.

The SVC sends these after detecting a module insertion or removal, and
in the former case after having determined the module geometry (i.e.
position and size).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Implement the interface activation and power-down sequences.

Note that all the required SVC operations have not yet been implemented
so some stub functions are used for now.

Support for hibernating the UniPro link depends on future
power-management work so a stub function is used also for this.

Interface type handling will be refined later.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>