The mic boosts (NID 0x08 and 0x18) are input-amps, not output-amps.
Fix the initial verbs for them.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of fixed kcontrol_new element, build "Input Source" controls
dynamically.  If the number of input-source items is 0 or 1, we don't
need to create such a control.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The reference NID for the analog outputs of STAC/IDT codecs is set
to a fixed number 0x02.  But this isn't always correct and in many
codecs it points to a non-existing NID.

This patch fixes the initialization of the PCM reference NID taken
from the actually probed DAC list.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

An intel board (8086:0204) works only with model=ref.

Reference: Novell bug #406529
	https://bugzilla.novell.com/show_bug.cgi?id=406529Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add another LanParty reference board SND_PCI_QUIRK to quirk lists of
all codec families.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a define for DFI PCI vendor id.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some revisions of the 92hd8xxx codec's not supporting port power
downs in which the using of it causes capture and also randomly
playback streams to not function at all. Thus by disabling it by
default and adding a option to enable it manually will fix all issue
on current and future revisions.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Port 0xe power mapping was incorrect set to 0x80 changed to the correct
value 0x40.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Gateway T1616 laptop needs EAPD always on while the current STAC9205
code turns off per HP plug.  Added a new model "eapd" to keep it on.

Reference: Novell bnc#467597
	https://bugzilla.novell.com/show_bug.cgi?id=467597Signed-off-by: Takashi Iwai <tiwai@suse.de>

Check the present pin control bit and avoid the write if it's already
set in patch_sigmatel.c.  This will reduce the number of verb execs at
jack plugging.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added model=hp-dv5 for HP dv4 (103c:30f7).

Reference: kernel bug #12440
	http://bugzilla.kernel.org/show_bug.cgi?id=12440Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Get rid of old VAIO static hack codes for STAC9872 and use the BIOS
auto-parser for all models.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

On the 92hd8xxx codecs port 0xe needs the connection selected to be the
last DAC in the list.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some laptops like VAIO have multiple codecs and uses ALC262 only for
the SPIDF output without analog I/O.  So far, the codec-parser assumes
the presence of analog I/O and returned an error for such a case.

This patch adds some hacks to allow the digital-only configuration for
ALC262.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Assign the proper PCM digital I/O type (HDA_PCM_TYPE_*) for the digital
I/O on STAC/IDT codecs.  HDA_PCM_TYPE_HDMI is assigned for the HDMI I/O.

A similar framework is implemented to patch_realtek.c, but it's not
set up and still using only HDA_PCM_TYPE_SPDIF yet.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add dig_out_type and dig_in_type fields to autocfg struct.
A proper HDA_PCM_TYPE_* value is assigned to these fields according
to the pin-jack location type value.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Don't break the loop in snd_hda_codec_build_pcms() even if the item
has no substreams.

It's possible that it's an empty item and the next item containing
the valid substreams (e.g. realtek codecs may create the analog
and alt-analog but no digitl streams).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use the standard STAC/IDT auto-probing routine for non-static
STAC9872 codec probing.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Accept non-SPDIF digital I/O pins as the digital pins.
These are usually corresponding to HDMI I/O.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the debug prints for digital I/O pin detections in
snd_hda_parse_pin_def_config() function.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

STAC/IDT codecs have often too large volume scales such as -96dB,
and exposing this as is results in too large scale in percentage
representation.

This patch adds the check of the volume scale and halves the
volume range if it's too large automatically.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added the volume offset to base for the standard volume controls
to handle elements with too big volume scales like -96dB..0dB.
For such elements, you can set the base volume to reduce the range.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fixed invalid power mappings for ports 0xd and 0xe on 93hd83xxx codecs.
They were shifted right one too many bits.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the 82801H variants 1071:8227 and 8086:2503 to use ALC883_MITAC

Reference: Ubuntu bug 210865
    https://bugs.launchpad.net/bugs/210865Signed-off-by: Luke Yelavich <themuso@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The codec-parsing of STAC925x was utterly broken due to its unique
design unlike other STAC codecs.  It has a volume control only in NID
0x0e (similar as STAC9200), but the parser assumes that the amp is
available on each DAC widget.

The patch fixes the whole wrong stories: fix the initial volume,
assign the fixed "Master" volume, and avoid to create wrong volume
controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The value set in the commit 2465fb66
is actually wrong.  The value range is from 0 to 0x1f while the patch
sets to 0x7f.  Let's fix it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix HP dv5 (103c:3603) built-in mic input.

Reference: kernel bug 12440
	http://bugzilla.kernel.org/show_bug.cgi?id=12440Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org

The selector widget 0x0e isn't initialized properly in the whole probe
process, thus it can be a wrong value depending on the BIOS setup.

This patch adds the init verb to set it to the max & unmuted.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix the bug introduced in commit c15c5060:
  sound/pci/hda/patch_sigmatel.c: In function ‘patch_stac92hd83xxx’:
  sound/pci/hda/patch_sigmatel.c:4765: warning: assignment from incompatible pointer type
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Have the Samsung Q45 (144d:c510) select ALC262_HIPPO by default

Reference: Ubuntu bug 200210
	http://launchpad.net/bugs/200210Signed-off-by: Luke Yelavich <themuso@ubuntu.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Resetting HP pinctl at the unplugged state may cause a sort of regression
on some devices because of their wrong pin configuration.

A simple workaround is to disable the pin reset.  This is ugly and may be
not good from the power-saving POV (if any), but damn simple.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org

Added amp nid for stac92hd8xxx families of codecs so the input amp
mixer is created.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

CF-74 does the headphone/speaker switching on hardware, thus the driver
shouldn't do any software-toggling of pins.  Otherwise it results in a
silent headphone output.

This patch simply resets the hp_detect flag to fix the problem.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Update models in patch_sigmatel.c, mainly for the last Gateway updates.
Signed-off-by: Takashi Iwai <tiwai@suse.de>