- 16 May, 2022 7 commits
-
-
Omar Sandoval authored
new_inode() always returns an inode with i_blocks and i_bytes set to 0 (via inode_init_always()). Remove the unnecessary call to inode_set_bytes() in btrfs_new_inode(). Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Omar Sandoval authored
btrfs_new_inode() always returns an inode with i_size and disk_i_size set to 0 (via inode_init_always() and btrfs_alloc_inode(), respectively). Remove the unnecessary calls to btrfs_i_size_write() in btrfs_mkdir() and btrfs_create_subvol_root(). Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Omar Sandoval authored
This is a trivial wrapper around btrfs_add_link(). The only thing it does other than moving arguments around is translating a > 0 return value to -EEXIST. As far as I can tell, btrfs_add_link() won't return > 0 (and if it did, the existing callsites in, e.g., btrfs_mkdir() would be broken). The check itself dates back to commit 2c90e5d6 ("Btrfs: still corruption hunting"), so it's probably left over from debugging. Let's just get rid of btrfs_add_nondir(). Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Omar Sandoval authored
When btrfs_qgroup_inherit(), btrfs_alloc_tree_block, or btrfs_insert_root() fail in create_subvol(), we return without freeing anon_dev. Reorganize the error handling in create_subvol() to fix this. Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Omar Sandoval authored
btrfs_rename() and btrfs_rename_exchange() don't account for enough items. Replace the incorrect explanations with a specific breakdown of the number of items and account them accurately. Note that this glosses over RENAME_WHITEOUT because the next commit is going to rework that, too. Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Omar Sandoval authored
__btrfs_unlink_inode() calls btrfs_update_inode() on the parent directory in order to update its size and sequence number. Make sure we account for it. Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Linus Torvalds authored
-
- 15 May, 2022 8 commits
-
-
Linus Torvalds authored
Merge tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here is one fix, and three documentation updates for 5.18-rc7. The fix is for the firmware loader which resolves a long-reported problem where the credentials of the firmware loader could be set to a userspace process without enough permissions to actually load the firmware image. Many Android vendors have been reporting this for quite some time. The documentation updates are for the embargoed-hardware-issues.rst file to add a new entry, change an existing one, and sort the list to make changes easier in the future. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation/process: Update ARM contact for embargoed hardware issues Documentation/process: Add embargoed HW contact for Ampere Computing Documentation/process: Make groups alphabetical and use tabs consistently firmware_loader: use kernel credentials when reading firmware
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are two small driver fixes for 5.18-rc7 that resolve reported problems: - slimbus driver irq bugfix - interconnect sync state bugfix Both of these have been in linux-next with no reported problems" * tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: slimbus: qcom: Fix IRQ check in qcom_slim_probe interconnect: Restore sync state by ignoring ipa-virt in provider count
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty n_gsm and serial driver fixes for 5.18-rc7 that resolve reported problems. They include: - n_gsm fixes for reported issues - 8250_mtk driver fixes for some platforms - fsl_lpuart driver fix for reported problem. - digicolor driver fix for reported problem. All have been in linux-next for a while with no reported problems" * tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: fsl_lpuart: Don't enable interrupts too early tty: n_gsm: fix invalid gsmtty_write_room() result tty: n_gsm: fix mux activation issues in gsm_config() tty: n_gsm: fix buffer over-read in gsm_dlci_data() serial: 8250_mtk: Fix register address for XON/XOFF character serial: 8250_mtk: Make sure to select the right FEATURE_SEL serial: 8250_mtk: Fix UART_EFR register address tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small fixes for reported issues with some USB drivers. They include: - xhci fixes for xhci-mtk platform driver - typec driver fixes for reported problems. - cdc-wdm read-stuck fix - gadget driver fix for reported race condition - new usb-serial driver ids All of these have been in linux-next with no reported problems" * tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci-mtk: remove bandwidth budget table usb: xhci-mtk: fix fs isoc's transfer error usb: gadget: fix race when gadget driver register via ioctl usb: typec: tcpci_mt6360: Update for BMC PHY setting usb: gadget: uvc: allow for application to cleanly shutdown usb: typec: tcpci: Don't skip cleanup in .remove() on error usb: cdc-wdm: fix reading stuck on device close USB: serial: qcserial: add support for Sierra Wireless EM7590 USB: serial: option: add Fibocom MA510 modem USB: serial: option: add Fibocom L610 modem USB: serial: pl2303: add device id for HP LM930 Display
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: - Fix KVM PR on 32-bit, which was broken by some MMU code refactoring. Thanks to: Alexander Graf, and Matt Evans. * tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix for the handling of unpopulated sub-pmd spaces. The copy & pasta from the corresponding s390 code screwed up the address calculation for marking the sub-pmd ranges via memset by omitting the ALIGN_DOWN() to calculate the proper start address. It's a mystery why this code is not generic and shared because there is nothing architecture specific in there, but that's too intrusive for a backportable fix" * tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix marking of unused sub-pmd ranges
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "The recent expansion of the sched switch tracepoint inserted a new argument in the middle of the arguments. This reordering broke BPF programs which relied on the old argument list. While tracepoints are not considered stable ABI, it's not trivial to make BPF cope with such a change, but it's being worked on. For now restore the original argument order and move the new argument to the end of the argument list" * tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/tracing: Append prev_state to tp args instead
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single fix for a recent (introduced in 5.16) regression in the core interrupt code. The consolidation of the interrupt handler invocation code added an unconditional warning when generic_handle_domain_irq() is invoked from outside hard interrupt context. That's overbroad as the requirement for invoking these handlers in hard interrupt context is only required for certain interrupt types. The subsequently called code already contains a warning which triggers conditionally for interrupt chips which indicate this requirement in their properties. Remove the overbroad one" * tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()
-
- 14 May, 2022 1 commit
-
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix two NDEBUG warnings in 'perf bench numa' - Fix ARM coresight `perf test` failure - Sync linux/kvm.h with the kernel sources - Add James and Mike as Arm64 performance events reviewers * tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: MAINTAINERS: Add James and Mike as Arm64 performance events reviewers tools headers UAPI: Sync linux/kvm.h with the kernel sources perf tests: Fix coresight `perf test` failure. perf bench: Fix two numa NDEBUG warnings
-
- 13 May, 2022 24 commits
-
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull more drm fixes from Dave Airlie: "Turns out I was right, some fixes hadn't made it to me yet. The vmwgfx ones also popped up later, but all seem like bad enough things to fix. The dma-buf, vc4 and nouveau ones are all pretty small. The fbdev fixes are a bit more complicated: a fix to cleanup fbdev devices properly, uncovered some use-after-free bugs in existing drivers. Then the fix for those bugs wasn't correct. This reverts that fix, and puts the proper fixes in place in the drivers to avoid the use-after-frees. This has had a fair number of eyes on it at this stage, and I'm confident enough that it puts things in the right place, and is less dangerous than reverting our way out of the initial change at this stage. fbdev: - revert NULL deref fix that turned into a use-after-free - prevent use-after-free in fbdev - efifb/simplefb/vesafb: fix cleanup paths to avoid use-after-frees dma-buf: - fix panic in stats setup vc4: - fix hdmi build nouveau: - tegra iommu present fix - fix leak in backlight name vmwgfx: - Black screen due to fences using FIFO checks on SVGA3 - Random black screens on boot due to uninitialized drm_mode_fb_cmd2 - Hangs on SVGA3 due to command buffers being used with gbobjects" * tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drm: drm/vmwgfx: Disable command buffers on svga3 without gbobjects drm/vmwgfx: Initialize drm_mode_fb_cmd2 drm/vmwgfx: Fix fencing on SVGAv3 drm/vc4: hdmi: Fix build error for implicit function declaration dma-buf: call dma_buf_stats_setup after dmabuf is in valid list fbdev: efifb: Fix a use-after-free due early fb_info cleanup drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name() drm/nouveau/tegra: Stop using iommu_present() fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove fbdev: Prevent possible use-after-free in fb_release() Revert "fbdev: Make fb_release() return -ENODEV if fbdev was unregistered"
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Multiple fixes to fbdev to address a regression at unregistration, an iommu detection improvement for nouveau, a memory leak fix for nouveau, pointer dereference fix for dma_buf_file_release(), and a build breakage fix for vc4 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220513073044.ymayac7x7bzatrt7@houat
-
Dave Airlie authored
Merge tag 'vmwgfx-drm-fixes-5.18-2022-05-13' of https://gitlab.freedesktop.org/zack/vmwgfx into drm-fixes vmwgfx fixes for: - Black screen due to fences using FIFO checks on SVGA3 - Random black screens on boot due to uninitialized drm_mode_fb_cmd2 - Hangs on SVGA3 due to command buffers being used with gbobjects Signed-off-by: Dave Airlie <airlied@redhat.com> From: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/a1d32799e4c74b8540216376d7576bb783ca07ba.camel@vmware.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fixes from Andreas Gruenbacher: "We've finally identified commit dc732906 ("gfs2: Introduce flag for glock holder auto-demotion") to be the other cause of the filesystem corruption we've been seeing. This feature isn't strictly necessary anymore, so we've decided to stop using it for now. With this and the gfs_iomap_end rounding fix you've already seen ("gfs2: Fix filesystem block deallocation for short writes" in this pull request), we're corruption free again now. - Fix filesystem block deallocation for short writes. - Stop using glock holder auto-demotion for now. - Get rid of buffered writes inefficiencies due to page faults being disabled. - Minor other cleanups" * tag 'gfs2-v5.18-rc4-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Stop using glock holder auto-demotion for now gfs2: buffered write prefaulting gfs2: Align read and write chunks to the page cache gfs2: Pull return value test out of should_fault_in_pages gfs2: Clean up use of fault_in_iov_iter_{read,write}able gfs2: Variable rename gfs2: Fix filesystem block deallocation for short writes
-
Andreas Gruenbacher authored
We're having unresolved issues with the glock holder auto-demotion mechanism introduced in commit dc732906. This mechanism was assumed to be essential for avoiding frequent short reads and writes until commit 296abc0d ("gfs2: No short reads or writes upon glock contention"). Since then, when the inode glock is lost, it is simply re-acquired and the operation is resumed. This means that apart from the performance penalty, we might as well drop the inode glock before faulting in pages, and re-acquire it afterwards. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
-
Andreas Gruenbacher authored
In gfs2_file_buffered_write, to increase the likelihood that all the user memory we're trying to write will be resident in memory, carry out the write in chunks and fault in each chunk of user memory before trying to write it. Otherwise, some workloads will trigger frequent short "internal" writes, causing filesystem blocks to be allocated and then partially deallocated again when writing into holes, which is wasteful and breaks reservations. Neither the chunked writes nor any of the short "internal" writes are user visible. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four fixes, all in drivers. These patches mosly fix error legs and exceptional conditions (scsi_dh_alua, qla2xxx). The lpfc fixes are for coding issues with lpfc features" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE scsi: lpfc: Fix split code for FLOGI on FCoE scsi: qla2xxx: Fix missed DMA unmap for aborted commands scsi: scsi_dh_alua: Properly handle the ALUA transitioning state
-
Andreas Gruenbacher authored
Align the chunks that reads and writes are carried out in to the page cache rather than the user buffers. This will be more efficient in general, especially for allocating writes. Optimizing the case that the user buffer is gfs2 backed isn't very useful; we only need to make sure we won't deadlock. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
-
Andreas Gruenbacher authored
Pull the return value test of the previous read or write operation out of should_fault_in_pages(). In a following patch, we'll fault in pages before the I/O and there will be no return value to check. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
-
Andreas Gruenbacher authored
No need to store the return value of the fault_in functions in separate variables. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
-
Andreas Gruenbacher authored
Instead of counting the number of bytes read from the filesystem, functions gfs2_file_direct_read and gfs2_file_read_iter count the number of bytes written into the user buffer. Conversely, functions gfs2_file_direct_write and gfs2_file_buffered_write count the number of bytes read from the user buffer. This is nothing but confusing, so change the read functions to count how many bytes they have read, and the write functions to count how many bytes they have written. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
-
Andreas Gruenbacher authored
When a write cannot be carried out in full, gfs2_iomap_end() releases blocks that have been allocated for this write but haven't been used. To compute the end of the allocation, gfs2_iomap_end() incorrectly rounded the end of the attempted write down to the next block boundary to arrive at the end of the allocation. It would have to round up, but the end of the allocation is also available as iomap->offset + iomap->length, so just use that instead. In addition, use round_up() for computing the start of the unused range. Fixes: 64bc06bb ("gfs2: iomap buffered write support") Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fix from Ilya Dryomov: "Two fixes to properly maintain xattrs on async creates and thus preserve SELinux context on newly created files and to avoid improper usage of folio->private field which triggered BUG_ONs. Both marked for stable" * tag 'ceph-for-5.18-rc7' of https://github.com/ceph/ceph-client: ceph: check folio PG_private bit instead of folio->private ceph: fix setting of xattrs on async created inodes
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "One more pull request. There was a bug in the fix to ensure that gss- proxy continues to work correctly after we fixed the AF_LOCAL socket leak in the RPC code. This therefore reverts that broken patch, and replaces it with one that works correctly. Stable fixes: - SUNRPC: Ensure that the gssproxy client can start in a connected state Bugfixes: - Revert "SUNRPC: Ensure gss-proxy connects on setup" - nfs: fix broken handling of the softreval mount option" * tag 'nfs-for-5.18-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: fix broken handling of the softreval mount option SUNRPC: Ensure that the gssproxy client can start in a connected state Revert "SUNRPC: Ensure gss-proxy connects on setup"
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull misc fixes from Andrew Morton: "Seven MM fixes, three of which address issues added in the most recent merge window, four of which are cc:stable. Three non-MM fixes, none very serious" [ And yes, that's a real pull request from Andrew, not me creating a branch from emailed patches. Woo-hoo! ] * tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: MAINTAINERS: add a mailing list for DAMON development selftests: vm: Makefile: rename TARGETS to VMTARGETS mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool mailmap: add entry for martyna.szapar-mudlaw@intel.com arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map procfs: prevent unprivileged processes accessing fdinfo dir mm: mremap: fix sign for EFAULT error return value mm/hwpoison: use pr_err() instead of dump_page() in get_any_page() mm/huge_memory: do not overkill when splitting huge_zero_page Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: - TLB invalidation workaround for Qualcomm Kryo-4xx "gold" CPUs - Fix broken dependency in the vDSO Makefile - Fix pointer authentication overrides in ISAR2 ID register * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs arm64: cpufeature: remove duplicate ID_AA64ISAR2_EL1 entry arm64: vdso: fix makefile dependency on vdso.so
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Restrict ltq-cputemp to SOC_XWAY to fix build failure - Add OF device ID table to tmp401 driver to enable auto-load * tag 'hwmon-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ltq-cputemp) restrict it to SOC_XWAY hwmon: (tmp401) Add OF device ID table
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Pretty quiet week on the fixes front, 4 amdgpu and one i915 fix. I think there might be a few misc fbdev ones outstanding, but I'll see if they are necessary and pass them on if so. amdgpu: - Disable ASPM for VI boards on ADL platforms - S0ix DCN3.1 display fix - Resume regression fix - Stable pstate fix i915: - fix for kernel memory corruption when running a lot of OpenCL tests in parallel" * tag 'drm-fixes-2022-05-13' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2) Revert "drm/amd/pm: keep the BACO feature enabled for suspend" drm/i915: Fix race in __i915_vma_remove_closed drm/amd/display: undo clearing of z10 related function pointers drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems
-
Zack Rusin authored
With very limited vram on svga3 it's difficult to handle all the surface migrations. Without gbobjects, i.e. the ability to store surfaces in guest mobs, there's no reason to support intermediate svga2 features, especially because we can fall back to fb traces and svga3 will never support those in-between features. On svga3 we wither want to use fb traces or screen targets (i.e. gbobjects), nothing in between. This fixes presentation on a lot of fusion/esxi tech previews where the exposed svga3 caps haven't been finalized yet. Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: 2cd80dbd ("drm/vmwgfx: Add basic support for SVGA3") Cc: <stable@vger.kernel.org> # v5.14+ Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-5-zack@kde.org
-
Zack Rusin authored
Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags and modifiers which were never initialized. Garbage in those members can cause random failures during the bringup of the fbcon. Initializing the structure fixes random blank screens after bootup due to flags/modifiers mismatches during the fbcon bring up. Fixes: dabdcdc9 ("drm/vmwgfx: Switch to mode_cmd2") Signed-off-by: Zack Rusin <zackr@vmware.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org
-
Zack Rusin authored
Port of the vmwgfx to SVGAv3 lacked support for fencing. SVGAv3 removed FIFO's and replaced them with command buffers and extra registers. The initial version of SVGAv3 lacked support for most advanced features (e.g. 3D) which made fences unnecessary. That is no longer the case, especially as 3D support is being turned on. Switch from FIFO commands and capabilities to command buffers and extra registers to enable fences on SVGAv3. Fixes: 2cd80dbd ("drm/vmwgfx: Add basic support for SVGA3") Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-5-zack@kde.org
-
Greg Kroah-Hartman authored
Merge tag 'icc-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Pull interconnect fixes from Georgi: "interconnect fixes for v5.18-rc This contains an additional fix for sc7180 and sdx55 platforms that helps them to enter suspend even on devices that don't have the most recent DT changes. - interconnect: Restore sync state by ignoring ipa-virt in provider count Signed-off-by: Georgi Djakov <djakov@kernel.org>" * tag 'icc-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: Restore sync state by ignoring ipa-virt in provider count
-
Adrian-Ken Rueegsegger authored
The unused part precedes the new range spanned by the start, end parameters of vmemmap_use_new_sub_pmd(). This means it actually goes from ALIGN_DOWN(start, PMD_SIZE) up to start. Use the correct address when applying the mark using memset. Fixes: 8d400913 ("x86/vmemmap: handle unpopulated sub-pmd ranges") Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220509090637.24152-2-ken@codelabs.ch
-
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serialGreg Kroah-Hartman authored
Johan writes: USB-serial fixes for 5.18-rc7 Here are some new device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-5.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: qcserial: add support for Sierra Wireless EM7590 USB: serial: option: add Fibocom MA510 modem USB: serial: option: add Fibocom L610 modem USB: serial: pl2303: add device id for HP LM930 Display
-