- 13 Aug, 2015 15 commits
-
-
Zhaoyang Liu authored
This patch adds support for 8997 chipset to mwifiex with SDIO/PCIe/USB interface. The corresponding firmware image files are located in: "mrvl/sd8997_uapsta.bin" "mrvl/pcie8997_uapsta.bin" "mrvl/usb8997_uapsta.bin" Signed-off-by:
Zhaoyang Liu <liuzy@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Dan Carpenter authored
The current code returns success if kmalloc fails. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Larry Finger authored
In this driver, two variables are masked by one quantity, and then tested against a second number with more bits that the mask. Accordingly, the test always fails. To minimize the possibility of such typos, a symbolic definition of the mask is created and used. The separate load and mask operations are also combined into a single statement. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Larry Finger authored
This driver is converted to use the common firmware header struct. Because the old header definition failed to indicate that the multi-byte entries should be little endian, several problems were thus exposed. These are fixed. Signed-off-by:
-
Larry Finger authored
This driver is converted to use the common firmware header struct. Because the old header definition failed to indicate that the multi-byte entries should be little endian, several problems were thus exposed. These are fixed. Signed-off-by:
-
Larry Finger authored
This driver is converted to use the common firmware header struct. Because the old header definition failed to indicate that the multi-byte entries should be little endian, several problems were thus exposed. These are fixed. Signed-off-by:
-
Larry Finger authored
This driver is converted to use the common firmware header struct. Because the old header definition failed to indicate that the multi-byte entries should be little endian, several problems were thus exposed. These are fixed. Signed-off-by:
-
Larry Finger authored
The drivers are converted to use the common firmware header struct. Because the old header definition failed to indicate that the multi-byte entries should be little endian, several problems were thus exposed. These are fixed. Signed-off-by:
-
Larry Finger authored
Commit e996db69 (rtlwifi: rtl8192c: Add init codes for "fw_version" and "fw_subversion") added initialization for fw_version, but failed to note that the variable in the firmware header is little-endian. The following Sparse warning results: CHECK drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c:242:36: warning: incorrect type in assignment (different base types) drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c:242:36: expected unsigned short [unsigned] [usertype] fw_version drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c:242:36: got restricted __le16 [usertype] version When fixing this problem, I noticed that several of the drivers contain nearly identical copies of the firmware header struct, and that only the one used in rtl8192c{e,u} had correct endian notation. The struct has been moved into a common header, and the other drivers will be fixed in subsequant patches. Signed-off-by:
-
Vineet Gupta authored
There's already a generic implementation so use that instead. Signed-off-by: -
Nicholas Mc Guire authored
Return type of wait_for_completion_timeout is unsigned long not int. As time_left is exclusively used for wait_for_completion_timeout here its type is simply changed to unsigned long. API conformance testing for completions with coccinelle spatches are being used to locate API usage inconsistencies: ./drivers/net/wireless/ath/ath9k/link.c:197 int return assigned to unsigned long Patch was compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m, Patch is against 4.1-rc3 (localversion-next is -next-20150514) Signed-off-by:Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
-
Nicholas Mc Guire authored
Return type of wait_for_completion_timeout is unsigned long not int. As time_left is exclusively used for wait_for_completion_timeout here its type is simply changed to unsigned long. API conformance testing for completions with coccinelle spatches are being used to locate API usage inconsistencies: ./drivers/net/wireless/ath/ath9k/wmi.c:331 int return assigned to unsigned long Patch was compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m, CONFIG_ATH9K_HTC=m Patch is against 4.1-rc3 (localversion-next is -next-20150514) Signed-off-by:
-
Nicholas Mc Guire authored
Return type of wait_for_completion_timeout is unsigned long not int. As time_left is exclusively used for wait_for_completion_timeout here its type is simply changed to unsigned long. API conformance testing for completions with coccinelle spatches are being used to locate API usage inconsistencies: ./drivers/net/wireless/ath/ath9k/htc_drv_init.c:81 int return assigned to unsigned long Patch was compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m, CONFIG_ATH9K_HTC=m Patch is against 4.1-rc3 (localversion-next is -next-20150514) Signed-off-by:
-
Nicholas Mc Guire authored
Return type of wait_for_completion_timeout is unsigned long not int. As time_left is exclusively used for wait_for_completion_timeout here its type is simply changed to unsigned long. API conformance testing for completions with coccinelle spatches are being used to locate API usage inconsistencies: ./drivers/net/wireless/ath/ath9k/htc_hst.c:171 int return assigned to unsigned long ./drivers/net/wireless/ath/ath9k/htc_hst.c:277 int return assigned to unsigned long ./drivers/net/wireless/ath/ath9k/htc_hst.c:206 int return assigned to unsigned long Patch was compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m, CONFIG_ATH9K_HTC=m Patch is against 4.1-rc3 (localversion-next is -next-20150514) Signed-off-by:
-
Cheolhyun Park authored
Signed-off-by:
Cheolhyun Park <pch851130@gmail.com> Signed-off-by:
-
- 10 Aug, 2015 11 commits
-
-
Bertold Van den Bergh authored
Make ath_opmode_to_string return "OCB" for NL80211_IFTYPE_OCB. Currently it will return "UNKNOWN". Signed-off-by:
Bertold Van den Bergh <bertold.vandenbergh@esat.kuleuven.be> Signed-off-by:
-
Hauke Mehrtens authored
bus->host_pdev is part of a union so bus->host_pdev != NULL is probably also true for PCIe devices, because there it accesses bus->host_pci. If we access the dev member at the offset defined in struct platform_device in struct pci_dev instead we probably get something else. This patch adds a new function which returns the host dev struct and NULL if we do not have a host dev. When this gets registered on MIPS brcm47xx we do not have a host dev in some situations. This function could also be used in other places. This problem was introduced in this commit: commit cae761b5 Author: Rafa? Mi?ecki <zajec5@gmail.com> Date: Sun Jun 28 17:17:13 2015 +0200 bcma: populate bus DT subnodes as platform_device-s Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Jakub Kicinski authored
mac80211 requires that rx path does not run concurrently with tx status reporting. Add a spinlock which will ensure that. Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
-
Jakub Kicinski authored
mac80211 requires that rx path does not run concurrently with tx status reporting. Since rx path is run in driver tasklet, tx status cannot be reported directly from interrupt context (there would be no way to lock it out). Add tasklet for tx and move all possible code from irq handler there. Note: tx tasklet is needed because workqueue is queued very rarely and that kills TCP performance. Signed-off-by: -
Jakub Kicinski authored
Rx is run inside a tasklet so ieee80211_rx() should be used instead of ieee80211_rx_ni(). Signed-off-by:
-
Jakub Kicinski authored
DMA to variables located on the stack is a bad idea. For simplicity and to avoid frequent allocations create a buffer inside the device structure. Protect this buffer with vendor_req_mutex. Don't protect vendor requests which don't use this buffer. Signed-off-by:
-
Eliad Peller authored
When starting a p2p mgmt interface, enable its device role. This allows us to keep the sta role disabled and scan on the dev role. In general, p2p management interfaces cannot send vif-specific commands to FW, as the vif role id is invalid. Only off-channel data and scans happen on this vif, so most ops are not relevant. If the vif is a p2p mgmt vif, block some mac80211 ops. Configure rate policies for p2p mgmt interface, as otherwise p2p packets come out with arbitrary rates. Since wpa_supplicant currently doesn't support standalone p2p device mode (without another attached managed interface), add p2p device to the allowed interface combinations without decreasing the allowed station count. Moreover, increase the station count in some cases, as AP mode usually starts as station interface, and the AP interface is now different from the p2p management one). Signed-off-by:
Arik Nemtsov <arik@wizery.com> Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
-
Eliad Peller authored
Add definitions and function prototypes for generic_cfg command. Signed-off-by:
-
Eliad Peller authored
Add support for long intervals on sched scan. If configured, the original request interval will be used num_short_interval times, and then the long interval will be used. While on it, fix the scan command field names to reflect the expected value is in ms (rather than secs). These values will be taken from the conf file, so bump its version accordingly. Signed-off-by:
Eyal Shapira <eyal@wizery.com> Signed-off-by:
-
Machani, Yaniv authored
Added support for a new time sync event the event data contains the WiLink TSF value. To trigger the event, a HW modification is required, so as a supporting firmware binary. Signed-off-by:
Yaniv Machani <yanivma@ti.com> Signed-off-by:
-
Amitkumar Karwar authored
Commit d8d2f19f ("mwifiex: silence TDLS link delete failure for nonexistent link") lowers the priority of error message when TDLS link is already deleted. But it had got increased by commit acebe8c1 ("mwifiex: change dbg print func to mwifiex_dbg") Reported-by:
Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by:
-
- 07 Aug, 2015 1 commit
-
-
Felix Fietkau authored
kbuild bot reported that commit 592fa228 ("ath9k: remove struct ath_atx_ac") broke the build when CONFIG_ATH9K_STATION_STATISTICS is y. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Fixes: 592fa228 ("ath9k: remove struct ath_atx_ac") Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
- 06 Aug, 2015 13 commits
-
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2015-08-04' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * Deprecate -10.ucode * Clean ups towards multiple Rx queues * Add support for longer CMD IDs. This will be required by new firmwares since we are getting close to the u8 limit. * bugfixes for the D0i3 power state * Add basic support for FTM * More random that doesn't really stand out
-
Guy Mishol authored
add comments to the antenna diversity reading Signed-off-by:
Guy Mishol <guym@ti.com> Signed-off-by:
-
Amitkumar Karwar authored
For PCIe/USB chipsets, preallocated skb buffers are reused for event handling. mwifiex_check_uap_capabilties() performs skb_pull(). This patch adds missing skb_push() to restore skb's data pointer/length. This bug was introduced by commit debfc600 ("mwifiex: update AP WMM settings from BSS_START event") Signed-off-by:
Nishant Sarmukadam <nishants@marvell.com> Signed-off-by:
-
Guy Mishol authored
add option to dynamically configure the fw which debug traces to open Signed-off-by:
-
Amitkumar Karwar authored
Preallocated event SKBs are getting reused for PCIe chipset. Their physical addresses are shared with firmware so that firmware can write data into them. This patch makes sure that SKB is cleared and length is set to default while submitting it to firmware. Signed-off-by:
-
Zhaoyang Liu authored
System crash was observed if one of the driver initialisation commands is timed out. The reason is our timeout handler triggers firmware dump, meanwhile driver initialisation error paths have already freed the adapter structure. Firmware hasn't yet completely initialized. So collecting firmware dump is not needed in this case. Command timeout handler is modified in this patch to fix the crash issue. Signed-off-by:
-
Zhaoyang Liu authored
When WLAN interface is up and running, driver unload and load was causing command timeout error. We enable Rx data by updating RX ring read pointer in init_fw_port(). It should be done when FW is completely intialialised. Command timeout is fixed in this patch by moving init_fw_port() call to mwifiex_init_fw_complete(). Signed-off-by:
-
Xinming Hu authored
Variable pos is u8 here, so memcpy is needed to store u16 aid. At the same time, aid should be platform independent, upper layer utility(wpa_supplicant,etc.,) parse it as le16, so keep it le16 here. Signed-off-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
-
Felix Fietkau authored
Use list_empty(&tid->list) instead Signed-off-by:
-
Felix Fietkau authored
struct ath_atx_ac contains a list of active TIDs belonging to one WMM AC. This patch changes the code to track active station TIDs in the txq directly. Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
Janusz.Dziedzic@tieto.com authored
Setup rxfiler correctly for offchannel ctx. This fix problem we didn't configure rxfilter, next didn't receive probe requests and next failed p2p_find. This was seen when ath9k loaded with use_chanctx=1 Signed-off-by:
Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by:
-
Janusz.Dziedzic@tieto.com authored
While mac80211 setup this per HW, set same rxfilter configuration for all chanctx. Signed-off-by:
-
