- 08 Apr, 2021 1 commit
-
-
Josh Hunt authored
Currently only root can write files under /proc/pressure. Relax this to allow tasks running as unprivileged users with CAP_SYS_RESOURCE to be able to write to these files. Signed-off-by:
Josh Hunt <johunt@akamai.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Link: https://lkml.kernel.org/r/20210402025833.27599-1-johunt@akamai.com
-
- 25 Mar, 2021 3 commits
-
-
Barry Song authored
mask is built in build_balance_mask() by for_each_cpu(i, sg_span), so it must be a subset of sched_group_span(sg). So the cpumask_and() call is redundant - remove it. [ mingo: Adjusted the changelog a bit. ] Signed-off-by:
Barry Song <song.bao.hua@hisilicon.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
Valentin Schneider <Valentin.Schneider@arm.com> Link: https://lore.kernel.org/r/20210325023140.23456-1-song.bao.hua@hisilicon.com
-
Rasmus Villemoes authored
-1 is -EPERM which is a somewhat odd error to return from sched_dynamic_write(). No other callers care about which negative value is used. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Link: https://lore.kernel.org/r/20210325004515.531631-2-linux@rasmusvillemoes.dk
-
Rasmus Villemoes authored
Use the enum names which are also what is used in the switch() in sched_dynamic_update(). Signed-off-by:
-
- 23 Mar, 2021 4 commits
-
-
Aubrey Li authored
A long-tail load balance cost is observed on the newly idle path, this is caused by a race window between the first nr_running check of the busiest runqueue and its nr_running recheck in detach_tasks. Before the busiest runqueue is locked, the tasks on the busiest runqueue could be pulled by other CPUs and nr_running of the busiest runqueu becomes 1 or even 0 if the running task becomes idle, this causes detach_tasks breaks with LBF_ALL_PINNED flag set, and triggers load_balance redo at the same sched_domain level. In order to find the new busiest sched_group and CPU, load balance will recompute and update the various load statistics, which eventually leads to the long-tail load balance cost. This patch clears LBF_ALL_PINNED flag for this race condition, and hence reduces the long-tail cost of newly idle balance. Signed-off-by:
Aubrey Li <aubrey.li@linux.intel.com> Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/1614154549-116078-1-git-send-email-aubrey.li@intel.com
-
Barry Song authored
update_idle_core() is only done for the case of sched_smt_present. but test_idle_cores() is done for all machines even those without SMT. This can contribute to up 8%+ hackbench performance loss on a machine like kunpeng 920 which has no SMT. This patch removes the redundant test_idle_cores() for !SMT machines. Hackbench is ran with -g {2..14}, for each g it is ran 10 times to get an average. $ numactl -N 0 hackbench -p -T -l 20000 -g $1 The below is the result of hackbench w/ and w/o this patch: g= 2 4 6 8 10 12 14 w/o: 1.8151 3.8499 5.5142 7.2491 9.0340 10.7345 12.0929 w/ : 1.8428 3.7436 5.4501 6.9522 8.2882 9.9535 11.3367 +4.1% +8.3% +7.3% +6.3% Signed-off-by:Mel Gorman <mgorman@suse.de> Link: https://lkml.kernel.org/r/20210320221432.924-1-song.bao.hua@hisilicon.com
-
Shakeel Butt authored
We noticed that the cost of psi increases with the increase in the levels of the cgroups. Particularly the cost of cpu_clock() sticks out as the kernel calls it multiple times as it traverses up the cgroup tree. This patch reduces the calls to cpu_clock(). Performed perf bench on Intel Broadwell with 3 levels of cgroup. Before the patch: $ perf bench sched all # Running sched/messaging benchmark... # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.747 [sec] # Running sched/pipe benchmark... # Executed 1000000 pipe operations between two processes Total time: 3.516 [sec] 3.516689 usecs/op 284358 ops/sec After the patch: $ perf bench sched all # Running sched/messaging benchmark... # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.640 [sec] # Running sched/pipe benchmark... # Executed 1000000 pipe operations between two processes Total time: 3.329 [sec] 3.329820 usecs/op 300316 ops/sec Signed-off-by:Shakeel Butt <shakeelb@google.com> Signed-off-by:
-
Valentin Schneider authored
Most callsites were covered by commit a8b62fd0 ("stop_machine: Add function and caller debug info") but this skipped queue_stop_cpus_work(). Add caller debug info to it. Signed-off-by:
-
- 21 Mar, 2021 1 commit
-
-
Ingo Molnar authored
Fix ~42 single-word typos in scheduler code comments. We have accumulated a few fun ones over the years. :-) Signed-off-by:
-
- 17 Mar, 2021 1 commit
-
-
Piotr Figiel authored
For userspace checkpoint and restore (C/R) a way of getting process state containing RSEQ configuration is needed. There are two ways this information is going to be used: - to re-enable RSEQ for threads which had it enabled before C/R - to detect if a thread was in a critical section during C/R Since C/R preserves TLS memory and addresses RSEQ ABI will be restored using the address registered before C/R. Detection whether the thread is in a critical section during C/R is needed to enforce behavior of RSEQ abort during C/R. Attaching with ptrace() before registers are dumped itself doesn't cause RSEQ abort. Restoring the instruction pointer within the critical section is problematic because rseq_cs may get cleared before the control is passed to the migrated application code leading to RSEQ invariants not being preserved. C/R code will use RSEQ ABI address to find the abort handler to which the instruction pointer needs to be set. To achieve above goals expose the RSEQ ABI address and the signature value with the new ptrace request PTRACE_GET_RSEQ_CONFIGURATION. This new ptrace request can also be used by debuggers so they are aware of stops within restartable sequences in progress. Signed-off-by:
Piotr Figiel <figiel@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Michal Miroslaw <emmir@google.com> Reviewed-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Link: https://lkml.kernel.org/r/20210226135156.1081606-1-figiel@google.com
-
- 10 Mar, 2021 2 commits
-
-
Edmundo Carmona Antoranz authored
Since 565790d2 (sched: Fix balance_callback(), 2020-05-11), there is no longer a need to reuse the result value of the call to finish_task_switch() inside schedule_tail(), therefore the variable used to hold that value (rq) is no longer needed. Signed-off-by:
Edmundo Carmona Antoranz <eantoranz@gmail.com> Signed-off-by:
-
Clement Courbet authored
A significant portion of __calc_delta() time is spent in the loop shifting a u64 by 32 bits. Use `fls` instead of iterating. This is ~7x faster on benchmarks. The generic `fls` implementation (`generic_fls`) is still ~4x faster than the loop. Architectures that have a better implementation will make use of it. For example, on x86 we get an additional factor 2 in speed without dedicated implementation. On GCC, the asm versions of `fls` are about the same speed as the builtin. On Clang, the versions that use fls are more than twice as slow as the builtin. This is because the way the `fls` function is written, clang puts the value in memory: https://godbolt.org/z/EfMbYe. This bug is filed at https://bugs.llvm.org/show_bug.cgi?idI406. ``` name cpu/op BM_Calc<__calc_delta_loop> 9.57ms Â=B112% BM_Calc<__calc_delta_generic_fls> 2.36ms Â=B113% BM_Calc<__calc_delta_asm_fls> 2.45ms Â=B113% BM_Calc<__calc_delta_asm_fls_nomem> 1.66ms Â=B112% BM_Calc<__calc_delta_asm_fls64> 2.46ms Â=B113% BM_Calc<__calc_delta_asm_fls64_nomem> 1.34ms Â=B115% BM_Calc<__calc_delta_builtin> 1.32ms Â=B111% ``` Signed-off-by:
Clement Courbet <courbet@google.com> Signed-off-by:
Josh Don <joshdon@google.com> Signed-off-by:
-
- 06 Mar, 2021 28 commits
-
-
Chengming Zhou authored
The commit 36b238d5 ("psi: Optimize switching tasks inside shared cgroups") only update cgroups whose state actually changes during a task switch only in task preempt case, not in task sleep case. We actually don't need to clear and set TSK_ONCPU state for common cgroups of next and prev task in sleep case, that can save many psi_group_change especially when most activity comes from one leaf cgroup. sleep before: psi_dequeue() while ((group = iterate_groups(prev))) # all ancestors psi_group_change(prev, .clear=TSK_RUNNING|TSK_ONCPU) psi_task_switch() while ((group = iterate_groups(next))) # all ancestors psi_group_change(next, .set=TSK_ONCPU) sleep after: psi_dequeue() nop psi_task_switch() while ((group = iterate_groups(next))) # until (prev & next) psi_group_change(next, .set=TSK_ONCPU) while ((group = iterate_groups(prev))) # all ancestors psi_group_change(prev, .clear=common?TSK_RUNNING:TSK_RUNNING|TSK_ONCPU) When a voluntary sleep switches to another task, we remove one call of psi_group_change() for every common cgroup ancestor of the two tasks. Co-developed-by:
Muchun Song <songmuchun@bytedance.com> Signed-off-by:
Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by:
-
Johannes Weiner authored
Move the unlikely branches out of line. This eliminates undesirable jumps during wakeup and sleeps for workloads that aren't under any sort of resource pressure. Signed-off-by:
-
Chengming Zhou authored
Move the reclaim detection from the timer tick to the task state tracking machinery using the recently added ONCPU state. And we also add task psi_flags changes checking in the psi_task_switch() optimization to update the parents properly. In terms of performance and cost, this ONCPU task state tracking is not cheaper than previous timer tick in aggregate. But the code is simpler and shorter this way, so it's a maintainability win. And Johannes did some testing with perf bench, the performace and cost changes would be acceptable for real workloads. Thanks to Johannes Weiner for pointing out the psi_task_switch() optimization things and the clearer changelog. Co-developed-by:
-
Chengming Zhou authored
The FULL state doesn't exist for the CPU resource at the system level, but exist at the cgroup level, means all non-idle tasks in a cgroup are delayed on the CPU resource which used by others outside of the cgroup or throttled by the cgroup cpu.max configuration. Co-developed-by:
-
Barry Song authored
As long as NUMA diameter > 2, building sched_domain by sibling's child domain will definitely create a sched_domain with sched_group which will span out of the sched_domain: +------+ +------+ +-------+ +------+ | node | 12 |node | 20 | node | 12 |node | | 0 +---------+1 +--------+ 2 +-------+3 | +------+ +------+ +-------+ +------+ domain0 node0 node1 node2 node3 domain1 node0+1 node0+1 node2+3 node2+3 + domain2 node0+1+2 | group: node0+1 | group:node2+3 <-------------------+ when node2 is added into the domain2 of node0, kernel is using the child domain of node2's domain2, which is domain1(node2+3). Node 3 is outside the span of the domain including node0+1+2. This will make load_balance() run based on screwed avg_load and group_type in the sched_group spanning out of the sched_domain, and it also makes select_task_rq_fair() pick an idle CPU outside the sched_domain. Real servers which suffer from this problem include Kunpeng920 and 8-node Sun Fire X4600-M2, at least. Here we move to use the *child* domain of the *child* domain of node2's domain2 as the new added sched_group. At the same, we re-use the lower level sgc directly. +------+ +------+ +-------+ +------+ | node | 12 |node | 20 | node | 12 |node | | 0 +---------+1 +--------+ 2 +-------+3 | +------+ +------+ +-------+ +------+ domain0 node0 node1 +- node2 node3 | domain1 node0+1 node0+1 | node2+3 node2+3 | domain2 node0+1+2 | group: node0+1 | group:node2 <-------------------+ While the lower level sgc is re-used, this patch only changes the remote sched_groups for those sched_domains playing grandchild trick, therefore, sgc->next_update is still safe since it's only touched by CPUs that have the group span as local group. And sgc->imbalance is also safe because sd_parent remains the same in load_balance and LB only tries other CPUs from the local group. Moreover, since local groups are not touched, they are still getting roughly equal size in a TL. And should_we_balance() only matters with local groups, so the pull probability of those groups are still roughly equal. Tested by the below topology: qemu-system-aarch64 -M virt -nographic \ -smp cpus=8 \ -numa node,cpus=0-1,nodeid=0 \ -numa node,cpus=2-3,nodeid=1 \ -numa node,cpus=4-5,nodeid=2 \ -numa node,cpus=6-7,nodeid=3 \ -numa dist,src=0,dst=1,val=12 \ -numa dist,src=0,dst=2,val=20 \ -numa dist,src=0,dst=3,val=22 \ -numa dist,src=1,dst=2,val=22 \ -numa dist,src=2,dst=3,val=12 \ -numa dist,src=1,dst=3,val=24 \ -m 4G -cpu cortex-a57 -kernel arch/arm64/boot/Image w/o patch, we get lots of "groups don't span domain->span": [ 0.802139] CPU0 attaching sched-domain(s): [ 0.802193] domain-0: span=0-1 level=MC [ 0.802443] groups: 0:{ span=0 cap=1013 }, 1:{ span=1 cap=979 } [ 0.802693] domain-1: span=0-3 level=NUMA [ 0.802731] groups: 0:{ span=0-1 cap=1992 }, 2:{ span=2-3 cap=1943 } [ 0.802811] domain-2: span=0-5 level=NUMA [ 0.802829] groups: 0:{ span=0-3 cap=3935 }, 4:{ span=4-7 cap=3937 } [ 0.802881] ERROR: groups don't span domain->span [ 0.803058] domain-3: span=0-7 level=NUMA [ 0.803080] groups: 0:{ span=0-5 mask=0-1 cap=5843 }, 6:{ span=4-7 mask=6-7 cap=4077 } [ 0.804055] CPU1 attaching sched-domain(s): [ 0.804072] domain-0: span=0-1 level=MC [ 0.804096] groups: 1:{ span=1 cap=979 }, 0:{ span=0 cap=1013 } [ 0.804152] domain-1: span=0-3 level=NUMA [ 0.804170] groups: 0:{ span=0-1 cap=1992 }, 2:{ span=2-3 cap=1943 } [ 0.804219] domain-2: span=0-5 level=NUMA [ 0.804236] groups: 0:{ span=0-3 cap=3935 }, 4:{ span=4-7 cap=3937 } [ 0.804302] ERROR: groups don't span domain->span [ 0.804520] domain-3: span=0-7 level=NUMA [ 0.804546] groups: 0:{ span=0-5 mask=0-1 cap=5843 }, 6:{ span=4-7 mask=6-7 cap=4077 } [ 0.804677] CPU2 attaching sched-domain(s): [ 0.804687] domain-0: span=2-3 level=MC [ 0.804705] groups: 2:{ span=2 cap=934 }, 3:{ span=3 cap=1009 } [ 0.804754] domain-1: span=0-3 level=NUMA [ 0.804772] groups: 2:{ span=2-3 cap=1943 }, 0:{ span=0-1 cap=1992 } [ 0.804820] domain-2: span=0-5 level=NUMA [ 0.804836] groups: 2:{ span=0-3 mask=2-3 cap=3991 }, 4:{ span=0-1,4-7 mask=4-5 cap=5985 } [ 0.804944] ERROR: groups don't span domain->span [ 0.805108] domain-3: span=0-7 level=NUMA [ 0.805134] groups: 2:{ span=0-5 mask=2-3 cap=5899 }, 6:{ span=0-1,4-7 mask=6-7 cap=6125 } [ 0.805223] CPU3 attaching sched-domain(s): [ 0.805232] domain-0: span=2-3 level=MC [ 0.805249] groups: 3:{ span=3 cap=1009 }, 2:{ span=2 cap=934 } [ 0.805319] domain-1: span=0-3 level=NUMA [ 0.805336] groups: 2:{ span=2-3 cap=1943 }, 0:{ span=0-1 cap=1992 } [ 0.805383] domain-2: span=0-5 level=NUMA [ 0.805399] groups: 2:{ span=0-3 mask=2-3 cap=3991 }, 4:{ span=0-1,4-7 mask=4-5 cap=5985 } [ 0.805458] ERROR: groups don't span domain->span [ 0.805605] domain-3: span=0-7 level=NUMA [ 0.805626] groups: 2:{ span=0-5 mask=2-3 cap=5899 }, 6:{ span=0-1,4-7 mask=6-7 cap=6125 } [ 0.805712] CPU4 attaching sched-domain(s): [ 0.805721] domain-0: span=4-5 level=MC [ 0.805738] groups: 4:{ span=4 cap=984 }, 5:{ span=5 cap=924 } [ 0.805787] domain-1: span=4-7 level=NUMA [ 0.805803] groups: 4:{ span=4-5 cap=1908 }, 6:{ span=6-7 cap=2029 } [ 0.805851] domain-2: span=0-1,4-7 level=NUMA [ 0.805867] groups: 4:{ span=4-7 cap=3937 }, 0:{ span=0-3 cap=3935 } [ 0.805915] ERROR: groups don't span domain->span [ 0.806108] domain-3: span=0-7 level=NUMA [ 0.806130] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5985 }, 2:{ span=0-3 mask=2-3 cap=3991 } [ 0.806214] CPU5 attaching sched-domain(s): [ 0.806222] domain-0: span=4-5 level=MC [ 0.806240] groups: 5:{ span=5 cap=924 }, 4:{ span=4 cap=984 } [ 0.806841] domain-1: span=4-7 level=NUMA [ 0.806866] groups: 4:{ span=4-5 cap=1908 }, 6:{ span=6-7 cap=2029 } [ 0.806934] domain-2: span=0-1,4-7 level=NUMA [ 0.806953] groups: 4:{ span=4-7 cap=3937 }, 0:{ span=0-3 cap=3935 } [ 0.807004] ERROR: groups don't span domain->span [ 0.807312] domain-3: span=0-7 level=NUMA [ 0.807386] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5985 }, 2:{ span=0-3 mask=2-3 cap=3991 } [ 0.807686] CPU6 attaching sched-domain(s): [ 0.807710] domain-0: span=6-7 level=MC [ 0.807750] groups: 6:{ span=6 cap=1017 }, 7:{ span=7 cap=1012 } [ 0.807840] domain-1: span=4-7 level=NUMA [ 0.807870] groups: 6:{ span=6-7 cap=2029 }, 4:{ span=4-5 cap=1908 } [ 0.807952] domain-2: span=0-1,4-7 level=NUMA [ 0.807985] groups: 6:{ span=4-7 mask=6-7 cap=4077 }, 0:{ span=0-5 mask=0-1 cap=5843 } [ 0.808045] ERROR: groups don't span domain->span [ 0.808257] domain-3: span=0-7 level=NUMA [ 0.808571] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6125 }, 2:{ span=0-5 mask=2-3 cap=5899 } [ 0.808848] CPU7 attaching sched-domain(s): [ 0.808860] domain-0: span=6-7 level=MC [ 0.808880] groups: 7:{ span=7 cap=1012 }, 6:{ span=6 cap=1017 } [ 0.808953] domain-1: span=4-7 level=NUMA [ 0.808974] groups: 6:{ span=6-7 cap=2029 }, 4:{ span=4-5 cap=1908 } [ 0.809034] domain-2: span=0-1,4-7 level=NUMA [ 0.809055] groups: 6:{ span=4-7 mask=6-7 cap=4077 }, 0:{ span=0-5 mask=0-1 cap=5843 } [ 0.809128] ERROR: groups don't span domain->span [ 0.810361] domain-3: span=0-7 level=NUMA [ 0.810400] groups: 6:{ span=0-1,4-7 mask=6-7 cap=5961 }, 2:{ span=0-5 mask=2-3 cap=5903 } w/ patch, we don't get "groups don't span domain->span" any more: [ 1.486271] CPU0 attaching sched-domain(s): [ 1.486820] domain-0: span=0-1 level=MC [ 1.500924] groups: 0:{ span=0 cap=980 }, 1:{ span=1 cap=994 } [ 1.515717] domain-1: span=0-3 level=NUMA [ 1.515903] groups: 0:{ span=0-1 cap=1974 }, 2:{ span=2-3 cap=1989 } [ 1.516989] domain-2: span=0-5 level=NUMA [ 1.517124] groups: 0:{ span=0-3 cap=3963 }, 4:{ span=4-5 cap=1949 } [ 1.517369] domain-3: span=0-7 level=NUMA [ 1.517423] groups: 0:{ span=0-5 mask=0-1 cap=5912 }, 6:{ span=4-7 mask=6-7 cap=4054 } [ 1.520027] CPU1 attaching sched-domain(s): [ 1.520097] domain-0: span=0-1 level=MC [ 1.520184] groups: 1:{ span=1 cap=994 }, 0:{ span=0 cap=980 } [ 1.520429] domain-1: span=0-3 level=NUMA [ 1.520487] groups: 0:{ span=0-1 cap=1974 }, 2:{ span=2-3 cap=1989 } [ 1.520687] domain-2: span=0-5 level=NUMA [ 1.520744] groups: 0:{ span=0-3 cap=3963 }, 4:{ span=4-5 cap=1949 } [ 1.520948] domain-3: span=0-7 level=NUMA [ 1.521038] groups: 0:{ span=0-5 mask=0-1 cap=5912 }, 6:{ span=4-7 mask=6-7 cap=4054 } [ 1.522068] CPU2 attaching sched-domain(s): [ 1.522348] domain-0: span=2-3 level=MC [ 1.522606] groups: 2:{ span=2 cap=1003 }, 3:{ span=3 cap=986 } [ 1.522832] domain-1: span=0-3 level=NUMA [ 1.522885] groups: 2:{ span=2-3 cap=1989 }, 0:{ span=0-1 cap=1974 } [ 1.523043] domain-2: span=0-5 level=NUMA [ 1.523092] groups: 2:{ span=0-3 mask=2-3 cap=4037 }, 4:{ span=4-5 cap=1949 } [ 1.523302] domain-3: span=0-7 level=NUMA [ 1.523352] groups: 2:{ span=0-5 mask=2-3 cap=5986 }, 6:{ span=0-1,4-7 mask=6-7 cap=6102 } [ 1.523748] CPU3 attaching sched-domain(s): [ 1.523774] domain-0: span=2-3 level=MC [ 1.523825] groups: 3:{ span=3 cap=986 }, 2:{ span=2 cap=1003 } [ 1.524009] domain-1: span=0-3 level=NUMA [ 1.524086] groups: 2:{ span=2-3 cap=1989 }, 0:{ span=0-1 cap=1974 } [ 1.524281] domain-2: span=0-5 level=NUMA [ 1.524331] groups: 2:{ span=0-3 mask=2-3 cap=4037 }, 4:{ span=4-5 cap=1949 } [ 1.524534] domain-3: span=0-7 level=NUMA [ 1.524586] groups: 2:{ span=0-5 mask=2-3 cap=5986 }, 6:{ span=0-1,4-7 mask=6-7 cap=6102 } [ 1.524847] CPU4 attaching sched-domain(s): [ 1.524873] domain-0: span=4-5 level=MC [ 1.524954] groups: 4:{ span=4 cap=958 }, 5:{ span=5 cap=991 } [ 1.525105] domain-1: span=4-7 level=NUMA [ 1.525153] groups: 4:{ span=4-5 cap=1949 }, 6:{ span=6-7 cap=2006 } [ 1.525368] domain-2: span=0-1,4-7 level=NUMA [ 1.525428] groups: 4:{ span=4-7 cap=3955 }, 0:{ span=0-1 cap=1974 } [ 1.532726] domain-3: span=0-7 level=NUMA [ 1.532811] groups: 4:{ span=0-1,4-7 mask=4-5 cap=6003 }, 2:{ span=0-3 mask=2-3 cap=4037 } [ 1.534125] CPU5 attaching sched-domain(s): [ 1.534159] domain-0: span=4-5 level=MC [ 1.534303] groups: 5:{ span=5 cap=991 }, 4:{ span=4 cap=958 } [ 1.534490] domain-1: span=4-7 level=NUMA [ 1.534572] groups: 4:{ span=4-5 cap=1949 }, 6:{ span=6-7 cap=2006 } [ 1.534734] domain-2: span=0-1,4-7 level=NUMA [ 1.534783] groups: 4:{ span=4-7 cap=3955 }, 0:{ span=0-1 cap=1974 } [ 1.536057] domain-3: span=0-7 level=NUMA [ 1.536430] groups: 4:{ span=0-1,4-7 mask=4-5 cap=6003 }, 2:{ span=0-3 mask=2-3 cap=3896 } [ 1.536815] CPU6 attaching sched-domain(s): [ 1.536846] domain-0: span=6-7 level=MC [ 1.536934] groups: 6:{ span=6 cap=1005 }, 7:{ span=7 cap=1001 } [ 1.537144] domain-1: span=4-7 level=NUMA [ 1.537262] groups: 6:{ span=6-7 cap=2006 }, 4:{ span=4-5 cap=1949 } [ 1.537553] domain-2: span=0-1,4-7 level=NUMA [ 1.537613] groups: 6:{ span=4-7 mask=6-7 cap=4054 }, 0:{ span=0-1 cap=1805 } [ 1.537872] domain-3: span=0-7 level=NUMA [ 1.537998] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6102 }, 2:{ span=0-5 mask=2-3 cap=5845 } [ 1.538448] CPU7 attaching sched-domain(s): [ 1.538505] domain-0: span=6-7 level=MC [ 1.538586] groups: 7:{ span=7 cap=1001 }, 6:{ span=6 cap=1005 } [ 1.538746] domain-1: span=4-7 level=NUMA [ 1.538798] groups: 6:{ span=6-7 cap=2006 }, 4:{ span=4-5 cap=1949 } [ 1.539048] domain-2: span=0-1,4-7 level=NUMA [ 1.539111] groups: 6:{ span=4-7 mask=6-7 cap=4054 }, 0:{ span=0-1 cap=1805 } [ 1.539571] domain-3: span=0-7 level=NUMA [ 1.539610] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6102 }, 2:{ span=0-5 mask=2-3 cap=5845 } Signed-off-by:Meelis Roos <mroos@linux.ee> Link: https://lkml.kernel.org/r/20210224030944.15232-1-song.bao.hua@hisilicon.com
-
Vincent Donnefort authored
Factorizing and unifying cpuhp callback range invocations, especially for the hotunplug path, where two different ways of decrementing were used. The first one, decrements before the callback is called: cpuhp_thread_fun() state = st->state; st->state--; cpuhp_invoke_callback(state); The second one, after: take_down_cpu()|cpuhp_down_callbacks() cpuhp_invoke_callback(st->state); st->state--; This is problematic for rolling back the steps in case of error, as depending on the decrement, the rollback will start from N or N-1. It also makes tracing inconsistent, between steps run in the cpuhp thread and the others. Additionally, avoid useless cpuhp_thread_fun() loops by skipping empty steps. Signed-off-by:Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by:
-
Vincent Donnefort authored
The atomic states (between CPUHP_AP_IDLE_DEAD and CPUHP_AP_ONLINE) are triggered by the CPUHP_BRINGUP_CPU step. If the latter fails, no atomic state can be rolled back. DEAD callbacks too can't fail and disallow recovery. As a consequence, during hotunplug, the fail injection interface should prohibit all states from CPUHP_BRINGUP_CPU to CPUHP_ONLINE. Signed-off-by:
-
Vincent Donnefort authored
Currently, the only way of resetting the fail injection is to trigger a hotplug, hotunplug or both. This is rather annoying for testing and, as the default value for this file is -1, it seems pretty natural to let a user write it. Signed-off-by:
-
Vincent Donnefort authored
Being called for each dequeue, util_est reduces the number of its updates by filtering out when the EWMA signal is different from the task util_avg by less than 1%. It is a problem for a sudden util_avg ramp-up. Due to the decay from a previous high util_avg, EWMA might now be close enough to the new util_avg. No update would then happen while it would leave ue.enqueued with an out-of-date value. Taking into consideration the two util_est members, EWMA and enqueued for the filtering, ensures, for both, an up-to-date value. This is for now an issue only for the trace probe that might return the stale value. Functional-wise, it isn't a problem, as the value is always accessed through max(enqueued, ewma). This problem has been observed using LISA's UtilConvergence:test_means on the sd845c board. No regression observed with Hackbench on sd845c and Perf-bench sched pipe on hikey/hikey960. Signed-off-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by:
-
Valentin Schneider authored
Syzbot reported a handful of occurrences where an sd->nr_balance_failed can grow to much higher values than one would expect. A successful load_balance() resets it to 0; a failed one increments it. Once it gets to sd->cache_nice_tries + 3, this *should* trigger an active balance, which will either set it to sd->cache_nice_tries+1 or reset it to 0. However, in case the to-be-active-balanced task is not allowed to run on env->dst_cpu, then the increment is done without any further modification. This could then be repeated ad nauseam, and would explain the absurdly high values reported by syzbot (86, 149). VincentG noted there is value in letting sd->cache_nice_tries grow, so the shift itself should be fixed. That means preventing: """ If the value of the right operand is negative or is greater than or equal to the width of the promoted left operand, the behavior is undefined. """ Thus we need to cap the shift exponent to BITS_PER_TYPE(typeof(lefthand)) - 1. I had a look around for other similar cases via coccinelle: @expr@ position pos; expression E1; expression E2; @@ ( E1 >> E2@pos | E1 >> E2@pos ) @cst depends on expr@ position pos; expression expr.E1; constant cst; @@ ( E1 >> cst@pos | E1 << cst@pos ) @script:python depends on !cst@ pos << expr.pos; exp << expr.E2; @@ # Dirty hack to ignore constexpr if exp.upper() != exp: coccilib.report.print_report(pos[0], "Possible UB shift here") The only other match in kernel/sched is rq_clock_thermal() which employs sched_thermal_decay_shift, and that exponent is already capped to 10, so that one is fine. Fixes: 5a7f5559 ("sched/fair: Relax constraint on task's load during load balance") Reported-by: syzbot+d7581744d5fd27c9fbe1@syzkaller.appspotmail.com Signed-off-by: -
Vincent Donnefort authored
The sub_positive local version is saving an explicit load-store and is enough for the cpu_util_next() usage. Signed-off-by:
Quentin Perret <qperret@google.com> Reviewed-by:
-
Vincent Donnefort authored
find_energy_efficient_cpu() (feec()) computes for each perf_domain (pd) an energy delta as follows: feec(task) for_each_pd base_energy = compute_energy(task, -1, pd) -> for_each_cpu(pd) -> cpu_util_next(cpu, task, -1) energy_delta = compute_energy(task, dst_cpu, pd) -> for_each_cpu(pd) -> cpu_util_next(cpu, task, dst_cpu) energy_delta -= base_energy Then it picks the best CPU as being the one that minimizes energy_delta. cpu_util_next() estimates the CPU utilization that would happen if the task was placed on dst_cpu as follows: max(cpu_util + task_util, cpu_util_est + _task_util_est) The task contribution to the energy delta can then be either: (1) _task_util_est, on a mostly idle CPU, where cpu_util is close to 0 and _task_util_est > cpu_util. (2) task_util, on a mostly busy CPU, where cpu_util > _task_util_est. (cpu_util_est doesn't appear here. It is 0 when a CPU is idle and otherwise must be small enough so that feec() takes the CPU as a potential target for the task placement) This is problematic for feec(), as cpu_util_next() might give an unfair advantage to a CPU which is mostly busy (2) compared to one which is mostly idle (1). _task_util_est being always bigger than task_util in feec() (as the task is waking up), the task contribution to the energy might look smaller on certain CPUs (2) and this breaks the energy comparison. This issue is, moreover, not sporadic. By starving idle CPUs, it keeps their cpu_util < _task_util_est (1) while others will maintain cpu_util > _task_util_est (2). Fix this problem by always using max(task_util, _task_util_est) as a task contribution to the energy (ENERGY_UTIL). The new estimated CPU utilization for the energy would then be: max(cpu_util, cpu_util_est) + max(task_util, _task_util_est) compute_energy() still needs to know which OPP would be selected if the task would be migrated in the perf_domain (FREQUENCY_UTIL). Hence, cpu_util_next() is still used to estimate the maximum util within the pd. Signed-off-by: -
Vincent Guittot authored
Start to update last_blocked_load_update_tick to reduce the possibility of another cpu starting the update one more time Signed-off-by:
-
Vincent Guittot authored
Instead of waking up a random and already idle CPU, we can take advantage of this_cpu being about to enter idle to run the ILB and update the blocked load. Signed-off-by:
-
Vincent Guittot authored
Reorder the tests and skip useless ones when no load balance has been performed and rq lock has not been released. Signed-off-by:
-
Vincent Guittot authored
Remove the specific case for handling this_cpu outside for_each_cpu() loop when running ILB. Instead we use for_each_cpu_wrap() and start with the next cpu after this_cpu so we will continue to finish with this_cpu. update_nohz_stats() is now used for this_cpu too and will prevents unnecessary update. We don't need a special case for handling the update of nohz.next_balance for this_cpu anymore because it is now handled by the loop like others. Signed-off-by:
-
Vincent Guittot authored
idle load balance is the only user of update_nohz_stats and doesn't use force parameter. Remove it Signed-off-by:
-
Vincent Guittot authored
The return of _nohz_idle_balance() is not used anymore so we can remove it Signed-off-by:
-
Vincent Guittot authored
newidle_balance runs with both preempt and irq disabled which prevent local irq to run during this period. The duration for updating the blocked load of CPUs varies according to the number of CPU cgroups with non-decayed load and extends this critical period to an uncontrolled level. Remove the update from newidle_balance and trigger a normal ILB that will take care of the update instead. This reduces the IRQ latency from O(nr_cgroups * nr_nohz_cpus) to O(nr_cgroups). Signed-off-by:
-
Sebastian Andrzej Siewior authored
The recent addition of in_serving_softirq() to kconv.h results in compile failure on PREEMPT_RT because it requires task_struct::softirq_disable_cnt. This is not available if kconv.h is included from sched.h. It is not needed to include kconv.h from sched.h. All but the net/ user already include the kconv header file. Move the include of the kconv.h header from sched.h it its users. Additionally include sched.h from kconv.h to ensure that everything task_struct related is available. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Andrey Konovalov <andreyknvl@google.com> Link: https://lkml.kernel.org/r/20210218173124.iy5iyqv3a4oia4vv@linutronix.de
-
Valentin Schneider authored
Since, when ->stop_pending, only the stopper can uninstall p->migration_pending. This could simplify a few ifs, because: (pending != NULL) => (pending == p->migration_pending) Also, the fatty comment above affine_move_task() probably needs a bit of gardening. Signed-off-by:
-
Mathieu Desnoyers authored
The function sync_runqueues_membarrier_state() should copy the membarrier state from the @mm received as parameter to each runqueue currently running tasks using that mm. However, the use of smp_call_function_many() skips the current runqueue, which is unintended. Replace by a call to on_each_cpu_mask(). Fixes: 227a4aad ("sched/membarrier: Fix p->mm->membarrier_state racy load") Reported-by:
Nadav Amit <nadav.amit@gmail.com> Signed-off-by:
-
Peter Zijlstra authored
Now that we have set_affinity_pending::stop_pending to indicate if a stopper is in progress, and we have the guarantee that if that stopper exists, it will (eventually) complete our @pending we can simplify the refcount scheme by no longer counting the stopper thread. Fixes: 6d337eab ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()") Cc: stable@kernel.org Signed-off-by:
-
Peter Zijlstra authored
Consider: sched_setaffinity(p, X); sched_setaffinity(p, Y); Then the first will install p->migration_pending = &my_pending; and issue stop_one_cpu_nowait(pending); and the second one will read p->migration_pending and _also_ issue: stop_one_cpu_nowait(pending), the _SAME_ @pending. This causes stopper list corruption. Add set_affinity_pending::stop_pending, to indicate if a stopper is in progress. Fixes: 6d337eab ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()") Cc: stable@kernel.org Signed-off-by:
-
Peter Zijlstra authored
When the purpose of migration_cpu_stop() is to migrate the task to 'any' valid CPU, don't migrate the task when it's already running on a valid CPU. Fixes: 6d337eab ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()") Cc: stable@kernel.org Signed-off-by:
-
Peter Zijlstra authored
The SCA_MIGRATE_ENABLE and task_running() cases are almost identical, collapse them to avoid further duplication. Fixes: 6d337eab ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()") Cc: stable@kernel.org Signed-off-by:
-
Peter Zijlstra authored
When affine_move_task() issues a migration_cpu_stop(), the purpose of that function is to complete that @pending, not any random other p->migration_pending that might have gotten installed since. This realization much simplifies migration_cpu_stop() and allows further necessary steps to fix all this as it provides the guarantee that @pending's stopper will complete @pending (and not some random other @pending). Fixes: 6d337eab ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()") Cc: stable@kernel.org Signed-off-by:
-
Peter Zijlstra authored
When affine_move_task(p) is called on a running task @p, which is not otherwise already changing affinity, we'll first set p->migration_pending and then do: stop_one_cpu(cpu_of_rq(rq), migration_cpu_stop, &arg); This then gets us to migration_cpu_stop() running on the CPU that was previously running our victim task @p. If we find that our task is no longer on that runqueue (this can happen because of a concurrent migration due to load-balance etc.), then we'll end up at the: } else if (dest_cpu < 1 || pending) { branch. Which we'll take because we set pending earlier. Here we first check if the task @p has already satisfied the affinity constraints, if so we bail early [A]. Otherwise we'll reissue migration_cpu_stop() onto the CPU that is now hosting our task @p: stop_one_cpu_nowait(cpu_of(rq), migration_cpu_stop, &pending->arg, &pending->stop_work); Except, we've never initialized pending->arg, which will be all 0s. This then results in running migration_cpu_stop() on the next CPU with arg->p == NULL, which gives the by now obvious result of fireworks. The cure is to change affine_move_task() to always use pending->arg, furthermore we can use the exact same pattern as the SCA_MIGRATE_ENABLE case, since we'll block on the pending->done completion anyway, no point in adding yet another completion in stop_one_cpu(). This then gives a clear distinction between the two migration_cpu_stop() use cases: - sched_exec() / migrate_task_to() : arg->pending == NULL - affine_move_task() : arg->pending != NULL; And we can have it ignore p->migration_pending when !arg->pending. Any stop work from sched_exec() / migrate_task_to() is in addition to stop works from affine_move_task(), which will be sufficient to issue the completion. Fixes: 6d337eab ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()") Cc: stable@kernel.org Signed-off-by:
-
