When creating MFD platform devices the firmware node is left unset.
This, in particular, prevents GPIO library to use it for different
purposes. Propagate firmware node from the parent device and let
GPIO library do the right thing.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Some of the drivers do not set parent device. This may lead to obstacles
during debugging or understanding the device relations from the Linux
point of view. Assign parent device for GPIO chips created by these
drivers.

While at it, let GPIO library to assign of_node from the parent device.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.

For the details one may look into the of_gpio_dev_init() implementation.

While at it, remove duplicate parent device assignment where it is the case.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Merge tag 'intel-gpio-v5.17-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next

intel-gpio for v5.17-1

- Don't set type for IRQ already in use in case of ACPI
- Drop unused call from GPIO ACPI library
- Clean up ML IOH and PCH GPIO drivers to make it closer to each other
- Clarify use of register file version in DesignWare driver
- other minor tweaks

Some GPIO providers set names for GPIO lines that match the names of
the pins on the SoC, or variations on that theme. These names are
generic more often that not, such as pioC12 in the at91 case. These
generic names block the possibility to set more useful GPIO line
names with device properties (i.e. gpio-line-names).

Allow overriding a generic name given by the GPIO driver if there is
a name given to the GPIO line using device properties, but leave the
generic name alone if no better name is available.

However, there is a risk. If user space is depending on the above
mentioned fixed GPIO names, AND there are device properties that
previously did not reach the surface, the name change might cause
regressions. But hopefully this stays below the radar...
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Use '-o' within [] in order to avoid spawning two processes for test.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

'==' is a bashisms and not understood by POSIX shell. Drop it from
gpio-sim selftests.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Add an ACPI HID(AMDIF031) and pin number in the pt_gpio_acpi_match.
Signed-off-by: Yuchang Hsu <Richard_Hsu@asmedia.com.tw>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Extend the existing Tegra186 GPIO controller driver with support for the
GPIO controller found on Tegra234. While the programming model remains
the same, the number of pins has slightly changed.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controller found on Tegra234. The number of pins is
slightly different, but the programming model remains the same.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
[treding@nvidia.com: update device tree bindings]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Convert the Tegra186 GPIO controller device tree bindings from free-form
text format to json-schema.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Convert the NVIDIA Tegra GPIO controller device tree bindings from
free-form text format to json-schema.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The double `all' in the comment in line 327 is repeated. Remove one
of them from the comment.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Add a set of tests for the new gpio-sim module. This is a pure shell
test-suite and uses the helper programs available in the gpio selftests
directory. These test-cases only test the functionalities exposed by the
gpio-sim driver, not those handled by core gpiolib code.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Add a simple program that allows to read GPIO line names from the
character device. This will be used in gpio-sim selftests.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Add a simple program that allows to retrieve chip properties from the
GPIO character device. This will be used in gpio-sim selftests.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Implement a new, modern GPIO testing module controlled by configfs
attributes instead of module parameters. The goal of this driver is
to provide a replacement for gpio-mockup that will be easily extensible
with new features and doesn't require reloading the module to change
the setup.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

If the driver sets the fwnode in struct gpio_chip, let it take
precedence over the of_node. This only affects OF-based systems,
ACPI needs to be converted separately.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Software nodes allow us to represent hierarchies for device components
that don't have their struct device representation yet - for instance:
banks of GPIOs under a common GPIO expander. The core gpiolib core
however doesn't offer any way of passing this information from the
drivers.

This extends struct gpio_chip with a pointer to fwnode that can be set
by the driver and used to pass device properties for child nodes.

This is similar to how we handle device-tree sub-nodes with
CONFIG_OF_GPIO enabled.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Currently all users of gpiod_add_hogs() call it only once at system
init so there never was any need for a mechanism allowing to remove
them. Now the upcoming gpio-sim will need to tear down chips with hogged
lines so provide a function that allows to remove hogs.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

The double `the' in the comment in line 142 is repeated. Remove one
of them from the comment.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The gpio-aspeed-sgpio driver implements an irq_chip which need to be
invoked from hardirq context. Since spin_lock() can sleep with
PREEMPT_RT, it is no longer legal to invoke it while interrupts are
disabled.
This also causes lockdep to complain about:
[   25.919465] [ BUG: Invalid wait context ]
because aspeed_sgpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The gpio-aspeed driver implements an irq_chip which need to be invoked
from hardirq context. Since spin_lock() can sleep with PREEMPT_RT, it is
no longer legal to invoke it while interrupts are disabled.
This also causes lockdep to complain about:
[    0.649797] [ BUG: Invalid wait context ]
because aspeed_gpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Several drivers read the 'ngpios' device property on their own, but
since it's defined as a standard GPIO property in the device tree bindings
anyway, it's a good candidate for generalization. If the driver didn't
set its gc->ngpio, try to read the 'ngpios' property from the GPIO
device's firmware node before bailing out.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Drop unneeded whitespaces and put the variables of the same type
together for consistency with the rest of the code.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Commit ea708ac5 ("gpio: xlp: Remove Netlogic XLP variants") has
build errors with CONFIG_ACPI:

drivers/gpio/gpio-xlp.c:300:23: error: 'GPIO_VARIANT_VULCAN' undeclared here (not in a function)

and !CONFIG_OF:

drivers/gpio/gpio-xlp.c:267:11: error: 'struct gpio_chip' has no member named 'of_node'

Fix these errors.

Fixes: ea708ac5 ("gpio: xlp: Remove Netlogic XLP variants")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Use the standard gpiochip request/release resource functions so that any
GPIOs used as interrupts are properly locked.  This allows libgpiod to
correctly show these GPIOs as in-use.
Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Currently the GPIO Aggregator does not support interrupts.  This means
that kernel drivers going from a GPIO to an IRQ using gpiod_to_irq(),
and userspace applications using line events do not work.

Add interrupt support by providing a gpio_chip.to_irq() callback, which
just calls into the parent GPIO controller.

Note that this does not implement full interrupt controller (irq_chip)
support, so using e.g. gpio-keys with "interrupts" instead of "gpios"
still does not work.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

This saves 20 bytes on arm32, and 44 bytes on arm64.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

First of all, it's obvious that different versions can't be provided
simultaneously. Hence, versions can't be bit masks.

Second, due to above we have to mask out the version field in the flags
and only that can be evaluated against the certain version.

Clarify all above by:
 - introducing GPIO_REG_OFFSET_V1 and GPIO_REG_OFFSET_MASK
 - replacing conditional to mask out bits and compare to a version

Luckily there is no functional change, so no need to backport this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>

The ML IOH driver is very similar to the PCH driver.  To make it more
similar, tweak the whitespace in ioh_gpio_direction_output() and
ioh_gpio_direction_input().  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The ML IOH driver is very similar to the PCH driver.  To make it more
similar, replace "1 << nr" with "BIT(nr)".  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

ioh_gpio_probe() repeats the "&pdev->dev" expression several times.  Cache
the result as "struct device *dev" to reduce the repetition.  No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

pch_gpio_probe() repeats the "&pdev->dev" expression several times.  Cache
the result as "struct device *dev" to reduce the repetition.  No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Previously, pch_gpio_probe() tested the Device ID to determine the type of
IOH.  But the driver core has already matched the Device ID with one of the
IDs in the pch_gpio_pcidev_id[] table, and we can supply the IOH type there
as .driver_data.

Use the pci_device_id.driver_data to learn the IOH type instead of testing
the Device ID again.

No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

To improve human readability and enable automatic validation, the tuples
in "interrupts" properties should be grouped using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

When ACPI device pointer available use it, otherwise take parent of GPIO chip.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really
should not change the type underneath the current owner.

I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay
Trail tablet, when the Boot OS selection in the BIOS is set to Android.
In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and
the _CRS resources for this device include a GpioInt pointing to a GPIO
already in use by an _AEI handler, with a different type then specified
in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get()
call done by the i2c-core-acpi.c code changing the type breaking the
_AEI handler.

Now this clearly is a bug in the DSDT of this tablet (in Android mode),
but in general calling irq_set_irq_type() on an IRQ which already is
in use seems like a bad idea.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

If all we want to manage is a single pointer, there's no need to
manually allocate and add a new devres. We can simply use
devm_add_action_or_reset() and shrink the code by a good bit.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Remove never used devm_acpi_dev_remove_driver_gpios().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>