- 28 Feb, 2019 7 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/block/floppy.c: In function 'request_done': drivers/block/floppy.c:2233:24: warning: variable 'q' set but not used [-Wunused-but-set-variable] It's never used and can be removed. Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Heinz Mauelshagen authored
null_handle_bio() erroneously uses the bio_op macro which masks respective request flag bits including REQ_FUA out thus failing the check. Fix by checking bio->bi_opf directly. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
zhengbin authored
If __device_add_disk-->bdi_register_owner-->bdi_register--> bdi_register_va-->device_create_vargs fails, bdi->dev is still NULL, __device_add_disk-->register_disk will visit bdi->dev->kobj. This patch fixes that. Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Carlos Maiolino authored
guard_bio_eod() can truncate a segment in bio to allow it to do IO on odd last sectors of a device. It already checks if the IO starts past EOD, but it does not consider the possibility of an IO request starting within device boundaries can contain more than one segment past EOD. In such cases, truncated_bytes can be bigger than PAGE_SIZE, and will underflow bvec->bv_len. Fix this by checking if truncated_bytes is lower than PAGE_SIZE. This situation has been found on filesystems such as isofs and vfat, which doesn't check the device size before mount, if the device is smaller than the filesystem itself, a readahead on such filesystem, which spans EOD, can trigger this situation, leading a call to zero_user() with a wrong size possibly corrupting memory. I didn't see any crash, or didn't let the system run long enough to check if memory corruption will be hit somewhere, but adding instrumentation to guard_bio_end() to check truncated_bytes size, was enough to see the error. The following script can trigger the error. MNT=/mnt IMG=./DISK.img DEV=/dev/loop0 mkfs.vfat $IMG mount $IMG $MNT cp -R /etc $MNT &> /dev/null umount $MNT losetup -D losetup --find --show --sizelimit 16247280 $IMG mount $DEV $MNT find $MNT -type f -exec cat {} + >/dev/null Kudos to Eric Sandeen for coming up with the reproducer above Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Dongli Zhang authored
Replace set->map[0] with set->map[HCTX_TYPE_DEFAULT] to avoid hardcoding. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
There is no need to only iterate in chunks of PAGE_SIZE or less in bvec_iter_advance, given that the callers pass in the chunk length that they are operating on - either that already is less than PAGE_SIZE because they do classic page-based iteration, or it is larger because the caller operates on multi-page bvecs. This should help shaving off a few cycles of the I/O hot path. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Ming Lei authored
mp_bvec_for_each_segment() is a bit big for the iteration, so introduce a light-weight helper for iterating over pages, then 32bytes stack space can be saved. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 27 Feb, 2019 3 commits
-
-
Ming Lei authored
Introduce a fast path for single-page bvec IO, then we can avoid to call bvec_split_segs() unnecessarily. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Ming Lei authored
Introduce a fast path for single-page bvec IO, then blk_bvec_map_sg() can be avoided. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Ming Lei authored
Single-page bvec can often be seen in small BS workloads, so introduce bvec_nth_page() for avoiding to call nth_page() unnecessarily, which looks not cheap. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 24 Feb, 2019 4 commits
-
-
Christoph Hellwig authored
Store the request queue the last bio was submitted to in the iocb private data in addition to the cookie so that we find the right block device. Also refactor the common direct I/O bio submission code into a nice little helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Modified to use bio_set_polled(). Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
For the upcoming async polled IO, we can't sleep allocating requests. If we do, then we introduce a deadlock where the submitter already has async polled IO in-flight, but can't wait for them to complete since polled requests must be active found and reaped. Utilize the helper in the blockdev DIRECT_IO code. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Just call blk_poll on the iocb cookie, we can derive the block device from the inode trivially. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
This new methods is used to explicitly poll for I/O completion for an iocb. It must be called for any iocb submitted asynchronously (that is with a non-null ki_complete) which has the IOCB_HIPRI flag set. The method is assisted by a new ki_cookie field in struct iocb to store the polling cookie. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 22 Feb, 2019 2 commits
-
-
Dongli Zhang authored
Commit 0da03cab ("loop: Fix deadlock when calling blkdev_reread_part()") moves blkdev_reread_part() out of the loop_ctl_mutex. However, GENHD_FL_NO_PART_SCAN is set before __blkdev_reread_part(). As a result, __blkdev_reread_part() will fail the check of GENHD_FL_NO_PART_SCAN and will not rescan the loop device to delete all partitions. Below are steps to reproduce the issue: step1 # dd if=/dev/zero of=tmp.raw bs=1M count=100 step2 # losetup -P /dev/loop0 tmp.raw step3 # parted /dev/loop0 mklabel gpt step4 # parted -a none -s /dev/loop0 mkpart primary 64s 1 step5 # losetup -d /dev/loop0 Step5 will not be able to delete /dev/loop0p1 (introduced by step4) and there is below kernel warning message: [ 464.414043] __loop_clr_fd: partition scan of loop0 failed (rc=-22) This patch sets GENHD_FL_NO_PART_SCAN after blkdev_reread_part(). Fixes: 0da03cab ("loop: Fix deadlock when calling blkdev_reread_part()") Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Dongli Zhang authored
Do not print warn message when the partition scan returns 0. Fixes: d57f3374 ("loop: Move special partition reread handling in loop_clr_fd()") Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 21 Feb, 2019 3 commits
-
-
Ming Lei authored
Block bounce needs to allocate new page for doing IO, and the new page has to be updated to bvec table. Commit 6dc4f100 switches __blk_queue_bounce() to use the new bio_for_each_segment_all() interface. Unfortunately the new bio_for_each_segment_all() can't be used to update bvec table. This patch fixes this issue by retrieving bvec from the table directly, then the new allocated page can be updated to the bio. This way is safe because the cloned bio is single page bvec. Fixes: 6dc4f100 ("block: allow bio_for_each_segment_all() to iterate over multi-page bvec") Cc: Christoph Hellwig <hch@lst.de> Cc: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe changes for 5.1 from Christoph * 'nvme-5.1' of git://git.infradead.org/nvme: (22 commits) nvme-rdma: use nr_phys_segments when map rq to sgl nvmet: convert to SPDX identifiers nvmet-rdma: convert to SPDX identifiers nvme-loop: convert to SPDX identifiers nvmet-fcloop: convert to SPDX identifiers nvmet-fc: convert to SPDX identifiers nvme: convert to SPDX identifiers nvme-pci: convert to SPDX identifiers nvme-lightnvm: convert to SPDX identifiers nvme-rdma: convert to SPDX identifiers nvme-fc: convert to SPDX identifiers nvme-fabrics: convert to SPDX identifiers nvme-tcp.h: fix SPDX header nvme_ioctl.h: remove duplicate GPL boilerplate nvme: return error from nvme_alloc_ns() nvme: avoid that deleting a controller triggers a circular locking complaint nvme: introduce a helper function for controller deletion nvme: unexport nvme_delete_ctrl_sync() nvme-pci: check kstrtoint() return value in queue_count_set() nvme-fabrics: document the poll function argument ...
-
Chaitanya Kulkarni authored
Use blk_rq_nr_phys_segments() instead of blk_rq_payload_bytes() to check if a command contains data to be mapped. This fixes the case where a struct request contains LBAs, but it has no payload, such as Write Zeroes support. Fixes: 6e02318e ("nvme: add support for the Write Zeroes command") Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
- 20 Feb, 2019 21 commits
-
-
Christoph Hellwig authored
Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Christoph Hellwig authored
Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Christoph Hellwig authored
Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Christoph Hellwig authored
Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Christoph Hellwig authored
Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Christoph Hellwig authored
Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Christoph Hellwig authored
Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Christoph Hellwig authored
Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Christoph Hellwig authored
Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Christoph Hellwig authored
Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Christoph Hellwig authored
Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Christoph Hellwig authored
For .h files we need to use /* */ style comments. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Christoph Hellwig authored
We already have a ЅPDX header, so no need to duplicate the information. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-
Hannes Reinecke authored
nvme_alloc_ns() might fail, so we should be returning an error code. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Bart Van Assche authored
Rework nvme_delete_ctrl_sync() such that it does not have to wait for queued work. This patch avoids that test nvme/008 triggers the following complaint: WARNING: possible circular locking dependency detected 5.0.0-rc6-dbg+ #10 Not tainted ------------------------------------------------------ nvme/7918 is trying to acquire lock: 000000009a1a7b69 ((work_completion)(&ctrl->delete_work)){+.+.}, at: __flush_work+0x379/0x410 but task is already holding lock: 00000000ef5a45b4 (kn->count#389){++++}, at: kernfs_remove_self+0x196/0x210 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (kn->count#389){++++}: lock_acquire+0xc5/0x1e0 __kernfs_remove+0x42a/0x4a0 kernfs_remove_by_name_ns+0x45/0x90 remove_files.isra.1+0x3a/0x90 sysfs_remove_group+0x5c/0xc0 sysfs_remove_groups+0x39/0x60 device_remove_attrs+0x68/0xb0 device_del+0x24d/0x570 cdev_device_del+0x1a/0x50 nvme_delete_ctrl_work+0xbd/0xe0 process_one_work+0x4f1/0xa40 worker_thread+0x67/0x5b0 kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 -> #0 ((work_completion)(&ctrl->delete_work)){+.+.}: __lock_acquire+0x1323/0x17b0 lock_acquire+0xc5/0x1e0 __flush_work+0x399/0x410 flush_work+0x10/0x20 nvme_delete_ctrl_sync+0x65/0x70 nvme_sysfs_delete+0x4f/0x60 dev_attr_store+0x3e/0x50 sysfs_kf_write+0x87/0xa0 kernfs_fop_write+0x186/0x240 __vfs_write+0xd7/0x430 vfs_write+0xfa/0x260 ksys_write+0xab/0x130 __x64_sys_write+0x43/0x50 do_syscall_64+0x71/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(kn->count#389); lock((work_completion)(&ctrl->delete_work)); lock(kn->count#389); lock((work_completion)(&ctrl->delete_work)); *** DEADLOCK *** 3 locks held by nvme/7918: #0: 00000000e2223b44 (sb_writers#6){.+.+}, at: vfs_write+0x1eb/0x260 #1: 000000003404976f (&of->mutex){+.+.}, at: kernfs_fop_write+0x128/0x240 #2: 00000000ef5a45b4 (kn->count#389){++++}, at: kernfs_remove_self+0x196/0x210 stack backtrace: CPU: 4 PID: 7918 Comm: nvme Not tainted 5.0.0-rc6-dbg+ #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x86/0xca print_circular_bug.isra.36.cold.54+0x173/0x1d5 check_prev_add.constprop.45+0x996/0x1110 __lock_acquire+0x1323/0x17b0 lock_acquire+0xc5/0x1e0 __flush_work+0x399/0x410 flush_work+0x10/0x20 nvme_delete_ctrl_sync+0x65/0x70 nvme_sysfs_delete+0x4f/0x60 dev_attr_store+0x3e/0x50 sysfs_kf_write+0x87/0xa0 kernfs_fop_write+0x186/0x240 __vfs_write+0xd7/0x430 vfs_write+0xfa/0x260 ksys_write+0xab/0x130 __x64_sys_write+0x43/0x50 do_syscall_64+0x71/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Bart Van Assche authored
This patch does not change any functionality but makes the next patch in this series easier to read. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Bart Van Assche authored
Since nvme_delete_ctrl_sync() is not called from any other kernel module, unexport it. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Bart Van Assche authored
This patch avoids that the compiler complains about 'ret' being set but not being used when building with W=1. Fixes: 3b6592f7 ("nvme: utilize two queue maps, one for reads and one for writes") # v5.0-rc1 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Bart Van Assche authored
This patch avoids that the kernel-doc tool reports a warning when building with W=1. Fixes: 26c68227 ("nvme-fabrics: allow nvmf_connect_io_queue to poll") # v5.0-rc1 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Bart Van Assche authored
This patch avoids that smatch complains about inconsistent indentation. Fixes: a07b4970 ("nvmet: add a generic NVMe target") # v4.10 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Hannes Reinecke authored
Implement a simple round-robin I/O policy for multipathing. Path selection is done in two rounds, first iterating across all optimized paths, and if that doesn't return any valid paths, iterate over all optimized and non-optimized paths. If no paths are found, use the existing algorithm. Also add a sysfs attribute 'iopolicy' to switch between the current NUMA-aware I/O policy and the 'round-robin' I/O policy. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-