When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Fixes: d180e0a1 ("Drivers: hv: Create debugfs file with hyper-v balloon usage information")
Cc: stable <stable@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230202140918.2289522-1-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-fixes-for-6.2a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:
  "1st set of IIO fixes for the 6.2 cycle.

   The usual mixed bag - with a bunch of issues found by Carlos Song
   in the fxos8700 IMU driver dominating.

   hid-accel,gyro
    - Fix wrong returned value when read succeeds.
   marvell,berlin-adc
    - Missing of_node_put() in an error path.
   nxp,fxos8700 (freescale)
    - Wrong channel type match.
    - Swapped channel read back.
    - Incomplete channel read back (not enough bytes).
    - Missing shift of acceleration data.
    - Range selection didn't work (datasheet bug)
    - Wrong ODR mode read back due to wrong field offset.
    - Drop unused, but wrong define.
    - Fix issue with magnetometer scale an units.
   nxp,imx8qxp
    - Fix an irq flood due to not reading data early enough.
   st,lsm6dsx
    - Add CONFIG_IIO_TRIGGERED_BUFFER select.
   st,stm32-adc
    - Fix missing MODULE_DEVICE_TABLE() needed for module aliases.
   ti,twl6030
    - Fix missing enable of some channels.
    - Fix a typo in previous patch that meant one channel still wasn't enabled.
   xilinx,xadc
    - Carrying on incorrectly after allocation error."

* tag 'iio-fixes-for-6.2a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: imu: fxos8700: fix MAGN sensor scale and unit
  iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
  iio: imu: fxos8700: fix failed initialization ODR mode assignment
  iio: imu: fxos8700: fix incorrect ODR mode readback
  iio: light: cm32181: Fix PM support on system with 2 I2C resources
  iio: hid: fix the retval in gyro_3d_capture_sample
  iio: hid: fix the retval in accel_3d_capture_sample
  iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
  iio:adc:twl6030: Enable measurement of VAC
  iio: imu: fxos8700: fix ACCEL measurement range selection
  iio: imu: fxos8700: fix IMU data bits returned to user space
  iio: imu: fxos8700: fix incomplete ACCEL and MAGN channels readback
  iio: imu: fxos8700: fix swapped ACCEL and MAGN channels readback
  iio: imu: fxos8700: fix map label of channel type to MAGN sensor
  iio:adc:twl6030: Enable measurements of VUSB, VBAT and others
  iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()
  iio: adc: xilinx-ams: fix devm_krealloc() return value check
  iio: adc: berlin2-adc: Add missing of_node_put() in error path
  iio: adc: stm32-dfsdm: fill module aliases

Merge tag 'fpga-for-6.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-linus

Xy writes:
   FPGA Manager changes for 6.2-final
   stratix10-soc:
     - Zheng's change fixes return value check
   Intel m10 bmc secure update:
     - Ilpo's change fixes probe rollback

   All patches have been reviewed on the mailing list, and have been in
   the last linux-next releases (as part of our for-6.2 branch)
Signed-off-by: Xu Yilun <yilun.xu@intel.com>

* tag 'fpga-for-6.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
  fpga: m10bmc-sec: Fix probe rollback
  fpga: stratix10-soc: Fix return value check in s10_ops_write_init()

Add the missing module device table so that the driver can be autoloaded
when built as a module.

Fixes: 40ce9798 ("nvmem: add QTI SDAM driver")
Cc: stable@vger.kernel.org	# 5.6
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-11-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Dan Carpenter points out that the return code was not set in commit
60c8b4aebd8e ("nvmem: core: fix cleanup after dev_set_name()"), but
this is not the only issue - we also need to zero wp_gpio to prevent
gpiod_put() being called on an error value.

Fixes: 560181d3 ("nvmem: core: fix cleanup after dev_set_name()")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-10-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem_add_cells() could return an error after some cells are already
added to the provider. In this case, the added cells are not removed.
Remove any registered cells if nvmem_add_cells() fails.

Fixes: fa72d847 ("nvmem: check the return value of nvmem_add_cells()")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-9-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In of_nvmem_cell_get(), of_get_next_parent() is used on cell_np. This
will decrement the refcount on cell_np, but cell_np is still used later
in the code. Use of_get_parent() instead and of_node_put() in the
appropriate places.

Fixes: 69aba794 ("nvmem: Add a simple NVMEM framework for consumers")
Fixes: 7ae6478b ("nvmem: core: rework nvmem cell instance creation")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-8-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The i.MX6 CPU frequency driver sometimes fails to register at boot time
due to nvmem_cell_read_u32() sporadically returning -ENOENT.

This happens because there is a window where __nvmem_device_get() in
of_nvmem_cell_get() is able to return the nvmem device, but as cells
have been setup, nvmem_find_cell_entry_by_node() returns NULL.

The occurs because the nvmem core registration code violates one of the
fundamental principles of kernel programming: do not publish data
structures before their setup is complete.

Fix this by making nvmem core code conform with this principle.

Fixes: eace75cf ("nvmem: Add a simple NVMEM framework for nvmem providers")
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-7-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If dev_set_name() fails, we leak nvmem->wp_gpio as the cleanup does not
put this. While a minimal fix for this would be to add the gpiod_put()
call, we can do better if we split device_register(), and use the
tested nvmem_release() cleanup code by initialising the device early,
and putting the device.

This results in a slightly larger fix, but results in clear code.

Note: this patch depends on "nvmem: core: initialise nvmem->id early"
and "nvmem: core: remove nvmem_config wp_gpio".

Fixes: 5544e90c ("nvmem: core: add error handling for dev_set_name")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[Srini: Fixed subject line and error code handing with wp_gpio while applying.]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-6-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No one provides wp_gpio, so let's remove it to avoid issues with
the nvmem core putting this gpio.

Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-5-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The error path for wp_gpio attempts to free the IDA nvmem->id, but
this has yet to be assigned, so will always be zero - leaking the
ID allocated by ida_alloc(). Fix this by moving the initialisation
of nvmem->id earlier.

Fixes: f7d8d7dc ("nvmem: fix memory leak in error path")
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-4-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The SID SRAM on at least some SoCs (A64 and D1) returns different values
when read with bus cycles narrower than 32 bits. This is not immediately
obvious, because memcpy_fromio() uses word-size accesses as long as
enough data is being copied.

The vendor driver always uses 32-bit MMIO reads, so do the same here.
This is faster than the register-based method, which is currently used
as a workaround on A64. And it fixes the values returned on D1, where
the SRAM method was being used.

The special case for the last word is needed to maintain .word_size == 1
for sysfs ABI compatibility, as noted previously in commit de2a3eae
("nvmem: sunxi_sid: Optimize register read-out method").

Fixes: 07ae4fde ("nvmem: sunxi_sid: Add support for D1 variant")
Cc: stable@vger.kernel.org
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-3-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the check for the return value of kzalloc in order to avoid
NULL pointer dereference.

Fixes: 6e977eaa ("nvmem: brcm_nvram: parse NVRAM content into NVMEM cells")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-2-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull another io_uring fix from Jens Axboe:
 "Just a single fix for a regression that happened in this release due
  to a poll change. Normally I would've just deferred it to next week,
  but since the original fix got picked up by stable, I think it's
  better to just send this one off separately.

  The issue is around the poll race fix, and how it mistakenly also got
  applied to multishot polling. Those don't need the race fix, and we
  should not be doing any reissues for that case. Exhaustive test cases
  were written and committed to the liburing regression suite for the
  reported issue, and additions for similar issues"

* tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux:
  io_uring/poll: don't reissue in case of poll race on multishot request

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc and other subsystem driver fixes for
  6.2-rc5 to resolve a few reported issues. They include:

   - long time pending fastrpc fixes (should have gone into 6.1, my
     fault)

   - mei driver/bus fixes and new device ids

   - interconnect driver fixes for reported problems

   - vmci bugfix

   - w1 driver bugfixes for reported problems

  Almost all of these have been in linux-next with no reported problems,
  the rest have all passed 0-day bot testing in my tree and on the
  mailing lists where they have sat too long due to me taking a long
  time to catch up on my pending patch queue"

* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  VMCI: Use threaded irqs instead of tasklets
  misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
  gsmi: fix null-deref in gsmi_get_variable
  misc: fastrpc: Fix use-after-free race condition for maps
  misc: fastrpc: Don't remove map on creater_process and device_release
  misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
  misc: fastrpc: fix error code in fastrpc_req_mmap()
  mei: me: add meteor lake point M DID
  mei: bus: fix unlink on bus in error path
  w1: fix WARNING after calling w1_process()
  w1: fix deadloop in __w1_remove_master_device()
  comedi: adv_pci1760: Fix PWM instruction handling
  interconnect: qcom: rpm: Use _optional func for provider clocks
  interconnect: qcom: msm8996: Fix regmap max_register values
  interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
  dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC

Pull driver core fixes from Greg KH:
 "Here are three small driver and kernel core fixes for 6.2-rc5. They
  include:

   - potential gadget fixup in do_prlimit

   - device property refcount leak fix

   - test_async_probe bugfix for reported problem"

* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  prlimit: do_prlimit needs to have a speculation check
  driver core: Fix test_async_probe_init saves device in wrong array
  device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 6.2-rc5. It resolves a build
  issue reported and Fixed by Arnd in the vc04_services driver. It's
  been in linux-next this week with no reported problems"

* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vchiq_arm: fix enum vchiq_status return types

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.2-rc5 that
  resolve a number of tiny reported issues and some new device ids. They
  include:

   - new device id for the exar serial driver

   - speakup tty driver bugfix

   - atmel serial driver baudrate fixup

   - stm32 serial driver bugfix and then revert as the bugfix broke the
     build. That will come back in a later pull request once it is all
     worked out properly.

   - amba-pl011 serial driver rs486 mode bugfix

   - qcom_geni serial driver bugfix

  Most of these have been in linux-next with no reported problems (well,
  other than the build breakage which generated the revert), the new
  device id passed 0-day testing"

* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: exar: Add support for Sealevel 7xxxC serial cards
  Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
  tty: serial: qcom_geni: avoid duplicate struct member init
  serial: atmel: fix incorrect baudrate setup
  tty: fix possible null-ptr-defer in spk_ttyio_release
  serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  serial: amba-pl011: fix high priority character transmission in rs486 mode
  serial: pch_uart: Pass correct sg to dma_unmap_sg()
  tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are a number of small USB and Thunderbolt driver fixes and new
  device id changes for 6.2-rc5. Included in here are:

   - thunderbolt bugfixes for reported problems

   - new usb-serial driver ids added

   - onboard_hub usb driver fixes for much-reported problems

   - xhci bugfixes

   - typec bugfixes

   - ehci-fsl driver module alias fix

   - iowarrior header size fix

   - usb gadget driver fixes

  All of these, except for the iowarrior fix, have been in linux-next
  with no reported issues. The iowarrior fix passed the 0-day testing
  and is a one digit change based on a reported problem in the driver
  (which was written to a spec, not the real device that is now
  available)"

* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
  usb: host: ehci-fsl: Fix module alias
  usb: dwc3: fix extcon dependency
  usb: core: hub: disable autosuspend for TI TUSB8041
  USB: fix misleading usb_set_intfdata() kernel doc
  usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
  USB: gadget: Add ID numbers to configfs-gadget driver names
  usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
  usb: gadget: g_webcam: Send color matching descriptor per frame
  usb: typec: altmodes/displayport: Use proper macro for pin assignment check
  usb: typec: altmodes/displayport: Fix pin assignment calculation
  usb: typec: altmodes/displayport: Add pin assignment helper
  usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
  usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
  usb: misc: onboard_hub: Move 'attach' work to the driver
  usb: misc: onboard_hub: Invert driver registration order
  usb: ucsi: Ensure connector delayed work items are flushed
  usb: musb: fix error return code in omap2430_probe()
  usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
  xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
  ...

Merge tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
   messages when GNU Make 4.4 is used.

 - Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.

 - Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.

 - Support GNU Make 4.4 for scripts/jobserver-exec.

 - Show clearer error message when kernel/gen_kheaders.sh fails due to
   missing cpio.

* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: explicitly validate existence of cpio command
  scripts: support GNU make 4.4 in jobserver-exec
  kconfig: Update all declared targets
  scripts: rpm: make clear that mkspec script contains 4.13 feature
  init/Kconfig: fix LOCALVERSION_AUTO help text
  kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
  kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
  init/version-timestamp.c: remove unneeded #include <linux/version.h>
  docs: kbuild: remove mention to dropped $(objtree) feature

+/-1200uT is a MAGN sensor full measurement range. Magnetometer scale
is the magnetic sensitivity parameter. It is referenced as 0.1uT
according to datasheet and magnetometer channel unit is Gauss in
sysfs-bus-iio documentation. Gauss and uTesla unit conversion
relationship as follows: 0.1uT = 0.001Gs.

Set magnetometer scale and available magnetometer scale as fixed 0.001Gs.

Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20230118074227.1665098-5-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

FXOS8700_CTRL_ODR_MIN is not used but value is probably wrong.

Remove it for a good readability.

Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20230118074227.1665098-4-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The absence of correct offset leads a failed initialization ODR mode
assignment.

Select MAX ODR mode as the initialization ODR mode by field mask and
FIELD_PREP.

Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20230118074227.1665098-3-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The absence of a correct offset leads an incorrect ODR mode
readback after use a hexadecimal number to mark the value from
FXOS8700_CTRL_REG1.

Get ODR mode by field mask and FIELD_GET clearly and conveniently.
And attach other additional fix for keeping the original code logic
and a good readability.

Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20230118074227.1665098-2-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

We potentially have old hashes of the xattr names generated on systems
with signed 'char' types.  Now that everybody uses '-funsigned-char',
those hashes will no longer match.

This only happens if you use xattrs names that have the high bit set,
which probably doesn't happen in practice, but the xfstest generic/454
shows it.

Instead of adding a new "signed xattr hash filesystem" bit and having to
deal with all the possible combinations, just calculate the hash both
ways if the first one fails, and always generate new hashes with the
proper unsigned char version.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212291509.704a11c9-oliver.sang@intel.com
Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/
Exposed-by: 3bc753c0 ("kbuild: treat char as always unsigned")
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit c1e62062 ("iio: light: cm32181: Handle CM3218 ACPI devices
with 2 I2C resources") creates a second client for the actual I2C
address, but the "struct device" passed to PM ops is the first I2C
client that can't talk to the sensor.

That means the I2C transfers in both suspend and resume routines can
fail and blocking the whole suspend process.

Instead of using the first client for I2C transfer, use the I2C client
stored in the cm32181 private struct so the PM ops can get the correct
I2C client to really talk to the sensor device.

Fixes: 68c1b3dd ("iio: light: cm32181: Add PM support")
BugLink: https://bugs.launchpad.net/bugs/1988346
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2152281Tested-by: Wahaj <wahajaved@protonmail.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230118170422.339619-1-kai.heng.feng@canonical.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

do_prlimit() adds the user-controlled resource value to a pointer that
will subsequently be dereferenced.  In order to help prevent this
codepath from being used as a spectre "gadget" a barrier needs to be
added after checking the range.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Tested-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull gpio fixes from Bartosz Golaszewski:

 - fix a potential race condition and always set GPIOs used as interrupt
   source to input in gpio-mxc

 - fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU

* tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU
  gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI
  gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
  gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock

Pull cifs fixes from Steve French:

 - important fix for packet signature calculation error

 - three fixes to correct DFS deadlock, and DFS refresh problem

 - remove an unused DFS function, and duplicate tcon refresh code

 - DFS cache lookup fix

 - uninitialized rc fix

* tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: remove unused function
  cifs: do not include page data when checking signature
  cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()
  cifs: handle cache lookup errors different than -ENOENT
  cifs: remove duplicate code in __refresh_tcon()
  cifs: don't take exclusive lock for updating target hints
  cifs: avoid re-lookups in dfs_cache_find()
  cifs: fix potential deadlock in cache_refresh_path()

Pull pin control fixes from Linus Walleij:

 - Compilation fix for Sunplus sp7021

 - Add some missing headers after a cleanup to the Nomadik driver

 - Fix pull type and mux routes on Rockchip RK3568

* tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: rockchip: fix mux route data for rk3568
  pinctrl: rockchip: fix reading pull type on rk3568
  pinctrl: nomadik: Add missing header(s)
  pinctrl: sp7021: fix unused function warning

Pull rdma fixes from Jason Gunthorpe:

 - Several hfi1 patches fixing some long standing driver bugs

 - Overflow when working with sg lists with elements greater than 4G

 - An rxe regression with object numbering after the mrs reach their
   limit

 - A theoretical problem with the scatterlist merging code

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  lib/scatterlist: Fix to calculate the last_pg properly
  IB/hfi1: Remove user expected buffer invalidate race
  IB/hfi1: Immediately remove invalid memory from hardware
  IB/hfi1: Fix expected receive setup error exit issues
  IB/hfi1: Reserve user expected TIDs
  IB/hfi1: Reject a zero-length user expected buffer
  RDMA/core: Fix ib block iterator counter overflow
  RDMA/rxe: Prevent faulty rkey generation
  RDMA/rxe: Fix inaccurate constants in rxe_type_info

A previous commit fixed a poll race that can occur, but it's only
applicable for multishot requests. For a multishot request, we can safely
ignore a spurious wakeup, as we never leave the waitqueue to begin with.

A blunt reissue of a multishot armed request can cause us to leak a
buffer, if they are ring provided. While this seems like a bug in itself,
it's not really defined behavior to reissue a multishot request directly.
It's less efficient to do so as well, and not required to rearm anything
like it is for singleshot poll requests.

Cc: stable@vger.kernel.org
Fixes: 6e5aedb9 ("io_uring/poll: attempt request issue after racy poll wakeup")
Reported-and-tested-by: Olivier Langlois <olivier@trillion01.com>
Link: https://github.com/axboe/liburing/issues/778Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull block fixes from Jens Axboe:
 "Various little tweaks all over the place:

   - NVMe pull request via Christoph:
       - fix controller shutdown regression in nvme-apple (Janne Grunau)
       - fix a polling on timeout regression in nvme-pci (Keith Busch)

   - Fix a bug in the read request side request allocation caching
     (Pavel)

   - pktcdvd was brought back after we configured a NULL return on bio
     splits, make it consistent with the others (me)

   - BFQ refcount fix (Yu)

   - Block cgroup policy activation fix (Yu)

   - Fix for an md regression introduced in the 6.2 cycle (Adrian)"

* tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux:
  nvme-pci: fix timeout request state check
  nvme-apple: only reset the controller when RTKit is running
  nvme-apple: reset controller during shutdown
  block: fix hctx checks for batch allocation
  block/rnbd-clt: fix wrong max ID in ida_alloc_max
  blk-cgroup: fix missing pd_online_fn() while activating policy
  pktcdvd: check for NULL returna fter calling bio_split_to_limits()
  block, bfq: switch 'bfqg->ref' to use atomic refcount apis
  md: fix incorrect declaration about claim_rdev in md_import_device

Pull io_uring fixes from Jens Axboe:
 "Fixes for the MSG_RING opcode. Nothing really major:

   - Fix an overflow missing serialization around posting CQEs to the
     target ring (me)

   - Disable MSG_RING on a ring that isn't enabled yet. There's nothing
     really wrong with allowing it, but 1) it's somewhat odd as nobody
     can receive them yet, and 2) it means that using the right delivery
     mechanism might change. As nobody should be sending CQEs to a ring
     that isn't enabled yet, let's just disable it (Pavel)

   - Tweak to when we decide to post remotely or not for MSG_RING
     (Pavel)"

* tag 'io_uring-6.2-2023-01-20' of git://git.kernel.dk/linux:
  io_uring/msg_ring: fix remote queue to disabled ring
  io_uring/msg_ring: fix flagging remote execution
  io_uring/msg_ring: fix missing lock on overflow for IOPOLL
  io_uring/msg_ring: move double lock/unlock helpers higher up

Pull btrfs fixes from David Sterba:

 - fix potential out-of-bounds access to leaf data when seeking in an
   inline file

 - fix potential crash in quota when rescan races with disable

 - reimplement super block signature scratching by marking page/folio
   dirty and syncing block device, allow removing write_one_page

* tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix race between quota rescan and disable leading to NULL pointer deref
  btrfs: fix invalid leaf access due to inline extent during lseek
  btrfs: stop using write_one_page in btrfs_scratch_superblock
  btrfs: factor out scratching of one regular super block

Merge tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fix from Shuah Khan:
 "Fix an error seen during unconfigured LLVM builds"

* tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kselftest: Fix error message for unconfigured LLVM builds

Pull thermal control fix from Rafael Wysocki:
 "Modify __thermal_cooling_device_register() to make it call
  put_device() after invoking device_register() and fix up a few error
  paths calling thermal_cooling_device_destroy_sysfs() unnecessarily
  (Viresh Kumar)"

* tag 'thermal-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: call put_device() only after device_register() fails

Pull ACPI fixes from Rafael Wysocki:
 "These update the ACPICA entry in MAINTAINERS, add a backlight handling
  quirk and fix the ACPI PRM (platform runtime) mechanism support.

  Specifics:

   - Update the ACPICA development list address in MAINTAINERS to the
     new one that does not bounce (Rafael Wysocki)

   - Check whether EFI runtime is available when registering the ACPI
     PRM address space handler and when running it (Ard Biesheuvel)

   - Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
     video driver (Hans de Goede)"

* tag 'acpi-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PRM: Check whether EFI runtime is available
  ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
  MAINTAINERS: Update the ACPICA development list address

Pull MMC fixes from Ulf Hansson:

 - sunxi-mmc: Fix clock refcount imbalance during unbind

 - sdhci-esdhc-imx: Fix some tuning settings

* tag 'mmc-v6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sunxi-mmc: Fix clock refcount imbalance during unbind
  mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting