- 22 Jan, 2022 40 commits
-
-
Muchun Song authored
PDE_DATA(inode) is introduced to get user private data and hide the layout of struct proc_dir_entry. The inode->i_private is used to do the same thing as well. Save a copy of user private data to inode-> i_private when proc inode is allocated. This means the user also can get their private data by inode->i_private. Introduce pde_data() to wrap inode->i_private so that we can remove PDE_DATA() from fs/proc/generic.c and make PTE_DATE() as a wrapper of pde_data(). It will be easier if we decide to remove PDE_DATE() in the future. Link: https://lkml.kernel.org/r/20211124081956.87711-1-songmuchun@bytedance.comSigned-off-by:
Muchun Song <songmuchun@bytedance.com> Acked-by:
Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Galbraith authored
The usage of get_cpu_var() in zs_map_object() is problematic because it disables preemption and makes it impossible to acquire any sleeping lock on PREEMPT_RT such as a spinlock_t. Replace the get_cpu_var() usage with a local_lock_t which is embedded struct mapping_area. It ensures that the access the struct is synchronized against all users on the same CPU. [minchan: remove the bit_spin_lock part and change the title] Link: https://lkml.kernel.org/r/20211115185909.3949505-10-minchan@kernel.orgSigned-off-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Minchan Kim <minchan@kernel.org> Tested-by:
-
Minchan Kim authored
The zsmalloc has used a bit for spin_lock in zpage handle to keep zpage object alive during several operations. However, it causes the problem for PREEMPT_RT as well as introducing too complicated. This patch replaces the bit spin_lock with pool->migrate_lock rwlock. It could make the code simple as well as zsmalloc work under PREEMPT_RT. The drawback is the pool->migrate_lock is bigger granuarity than per zpage lock so the contention would be higher than old when both IO-related operations(i.e., zsmalloc, zsfree, zs_[map|unmap]) and compaction(page/zpage migration) are going in parallel(*, the migrate_lock is rwlock and IO related functions are all read side lock so there is no contention). However, the write-side is fast enough(dominant overhead is just page copy) so it wouldn't affect much. If the lock granurity becomes more problem later, we could introduce table locks based on handle as a hash value. Link: https://lkml.kernel.org/r/20211115185909.3949505-9-minchan@kernel.orgSigned-off-by:
-
Minchan Kim authored
In preparation for converting bit_spin_lock to rwlock in zsmalloc so that multiple writers of zspages can run at the same time but those zspages are supposed to be different zspage instance. Thus, it's not deadlock. This patch adds write_lock_nested to support the case for LOCKDEP. [minchan@kernel.org: fix write_lock_nested for RT] Link: https://lkml.kernel.org/r/YZfrMTAXV56HFWJY@google.com [bigeasy@linutronix.de: fixup write_lock_nested() implementation] Link: https://lkml.kernel.org/r/20211123170134.y6xb7pmpgdn4m3bn@linutronix.de Link: https://lkml.kernel.org/r/20211115185909.3949505-8-minchan@kernel.orgSigned-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
-
Minchan Kim authored
zspage isolation for migration introduced additional exceptions to be dealt with since the zspage was isolated from class list. The reason why I isolated zspage from class list was to prevent race between obj_malloc and page migration via allocating zpage from the zspage further. However, it couldn't prevent object freeing from zspage so it needed corner case handling. This patch removes the whole mess. Now, we are fine since class->lock and zspage->lock can prevent the race. Link: https://lkml.kernel.org/r/20211115185909.3949505-7-minchan@kernel.orgSigned-off-by:
-
Minchan Kim authored
The flag aims for zspage, not per page. Let's move it to zspage. Link: https://lkml.kernel.org/r/20211115185909.3949505-6-minchan@kernel.orgSigned-off-by:
-
Minchan Kim authored
The usage pattern for obj_to_head is to check whether the zpage is allocated or not. Thus, introduce obj_allocated. Link: https://lkml.kernel.org/r/20211115185909.3949505-5-minchan@kernel.orgSigned-off-by:
-
Minchan Kim authored
This patch moves class stat update out of obj_malloc since it's not related to zspage operation. This is a preparation to introduce new lock scheme in next patch. Link: https://lkml.kernel.org/r/20211115185909.3949505-4-minchan@kernel.orgSigned-off-by:
-
Minchan Kim authored
The stat aims for class stat, not zspage so rename it. Link: https://lkml.kernel.org/r/20211115185909.3949505-3-minchan@kernel.orgSigned-off-by:
-
Minchan Kim authored
Patch series "zsmalloc: remove bit_spin_lock", v2. zsmalloc uses bit_spin_lock to minimize space overhead since it's zpage granularity lock. However, it causes zsmalloc non-working under PREEMPT_RT as well as adding too much complication. This patchset tries to replace the bit_spin_lock with per-pool rwlock. It also removes unnecessary zspage isolation logic from class, which was the other part too much complication added into zsmalloc. Last patch changes the get_cpu_var to local_lock to make it work in PREEMPT_RT. This patch (of 9): get_zspage_mapping returns fullness as well as class_idx. However, the fullness is usually not used since it could be stale in some contexts. It causes misleading as well as unnecessary instructions so this patch introduces zspage_class. obj_to_location also produces page and index but we don't need always the index, either so this patch introduces obj_to_page. Link: https://lkml.kernel.org/r/20211115185909.3949505-1-minchan@kernel.org Link: https://lkml.kernel.org/r/20211115185909.3949505-2-minchan@kernel.orgSigned-off-by:
-
Baokun Li authored
When we pass a negative value to the proc_doulongvec_minmax() function, the function returns 0, but the corresponding interface value does not change. we can easily reproduce this problem with the following commands: cd /proc/sys/fs/epoll echo -1 > max_user_watches; echo $?; cat max_user_watches This function requires a non-negative number to be passed in, so when a negative number is passed in, -EINVAL is returned. Link: https://lkml.kernel.org/r/20211220092627.3744624-1-libaokun1@huawei.comSigned-off-by:Baokun Li <libaokun1@huawei.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Colin Ian King authored
The const variable ten_thousand is not used, it is redundant and can be removed. Cleans up clang warning: kernel/sysctl.c:99:18: warning: unused variable 'ten_thousand' [-Wunused-const-variable] static const int ten_thousand = 10000; Link: https://lkml.kernel.org/r/20211221184501.574670-1-colin.i.king@gmail.com Fixes: c26da54dc8ca ("printk: move printk sysctl to printk/sysctl.c") Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
-
Xiaoming Ni authored
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. Move sysctl_kprobes_optimization from kernel/sysctl.c to kernel/kprobes.c. Use register_sysctl() to register the sysctl interface. [mcgrof@kernel.org: fix compile issue when CONFIG_OPTPROBES is disabled] Link: https://lkml.kernel.org/r/20211129211943.640266-7-mcgrof@kernel.orgSigned-off-by:
Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by:
-
Xiaoming Ni authored
This moves the fs/coredump.c respective sysctls to its own file. Link: https://lkml.kernel.org/r/20211129211943.640266-6-mcgrof@kernel.orgSigned-off-by:
-
Xiaoming Ni authored
build warning when CONFIG_PRINTK=n kernel/printk/printk.c:175:5: warning: no previous prototype for 'devkmsg_sysctl_set_loglvl' [-Wmissing-prototypes] devkmsg_sysctl_set_loglvl() is only used in sysctl.c when CONFIG_PRINTK=y, but it participates in the build when CONFIG_PRINTK=n. So add compile dependency CONFIG_PRINTK=y && CONFIG_SYSCTL=y to fix the build warning. Link: https://lkml.kernel.org/r/20211129211943.640266-5-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
Rename sysctl_init() to sysctl_init_bases() so to reflect exactly what this is doing. Link: https://lkml.kernel.org/r/20211129211943.640266-4-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
This moves the namespace sysctls to its own file as part of the kernel/sysctl.c spring cleaning Since we have now removed all sysctls for "fs", we now have to declare it on the filesystem code, we do that using the new helper, which reduces boiler plate code. We rename init_fs_shared_sysctls() to init_fs_sysctls() to reflect that now fs/sysctls.c is taking on the burden of being the first to register the base directory as well. Lastly, since init code will load in the order in which we link it we have to move the sysctl code to be linked in early, so that its early init routine runs prior to other fs code. This way, other filesystem code can register their own sysctls using the helpers after this: * register_sysctl_init() * register_sysctl() Link: https://lkml.kernel.org/r/20211129211943.640266-3-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
Patch series "sysctl: add and use base directory declarer and registration helper". In this patch series we start addressing base directories, and so we start with the "fs" sysctls. The end goal is we end up completely moving all "fs" sysctl knobs out from kernel/sysctl. This patch (of 6): Add a set of helpers which can be used to declare and register base directory sysctls on their own. We do this so we can later move each of the base sysctl directories like "fs", "kernel", etc, to their own respective files instead of shoving the declarations and registrations all on kernel/sysctl.c. The lazy approach has caught up and with this, we just end up extending the list of base directories / sysctls on one file and this makes maintenance difficult due to merge conflicts from many developers. The declarations are used first by kernel/sysctl.c for registration its own base which over time we'll try to clean up. It will be used in the next patch to demonstrate how to cleanly deal with base sysctl directories. [mcgrof@kernel.org: null-terminate the ctl_table arrays] Link: https://lkml.kernel.org/r/YafJY3rXDYnjK/gs@bombadil.infradead.org Link: https://lkml.kernel.org/r/20211129211943.640266-1-mcgrof@kernel.org Link: https://lkml.kernel.org/r/20211129211943.640266-2-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the pipe sysctls to its own file. Link: https://lkml.kernel.org/r/20211129205548.605569-10-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the fs/exec.c respective sysctls to its own file. Since checkpatch complains about style issues with the old code, this move also fixes a few of those minor style issues: * Use pr_warn() instead of prink(WARNING * New empty lines are wanted at the beginning of routines Link: https://lkml.kernel.org/r/20211129205548.605569-9-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move namei's own sysctl knobs to its own file. Other than the move we also avoid initializing two static variables to 0 as this is not needed: * sysctl_protected_symlinks * sysctl_protected_hardlinks Link: https://lkml.kernel.org/r/20211129205548.605569-8-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. The locking fs sysctls are only used on fs/locks.c, so move them there. Link: https://lkml.kernel.org/r/20211129205548.605569-7-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move sysctls which are shared between filesystems into a common file outside of kernel/sysctl.c. Link: https://lkml.kernel.org/r/20211129205548.605569-6-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
The maxolduid value is only shared for sysctl purposes for use on a max range. Just stuff this into our shared const array. [akpm@linux-foundation.org: fix sysctl_vals[], per Mickaël] Link: https://lkml.kernel.org/r/20211129205548.605569-5-mcgrof@kernel.orgSigned-off-by:
Mickaël Salaün <mic@digikod.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Stephen Kitt <steve@sk2.org> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by:
-
Luis Chamberlain authored
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the dcache sysctl clutter out of kernel/sysctl.c. This is a small one-off entry, perhaps later we can simplify this representation, but for now we use the helpers we have. We won't know how we can simplify this further untl we're fully done with the cleanup. [arnd@arndb.de: avoid unused-function warning] Link: https://lkml.kernel.org/r/20211203190123.874239-2-arnd@kernel.org Link: https://lkml.kernel.org/r/20211129205548.605569-4-mcgrof@kernel.orgSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Stephen Kitt <steve@sk2.org> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by:
-
Luis Chamberlain authored
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. We can create the sysctl dynamically on early init for fs stat to help with this clutter. This dusts off the fs stat syctls knobs and puts them into where they are declared. Link: https://lkml.kernel.org/r/20211129205548.605569-3-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
Patch series "sysctl: 4th set of kernel/sysctl cleanups". This is slimming down the fs uses of kernel/sysctl.c to the point that the next step is to just get rid of the fs base directory for it and move that elsehwere, so that next patch series starts dealing with that to demo how we can end up cleaning up a full base directory from kernel/sysctl.c, one at a time. This patch (of 9): kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the inode sysctls to its own file. Since we are no longer using this outside of fs/ remove the extern declaration of its respective proc helper. We use early_initcall() as it is the earliest we can use. [arnd@arndb.de: avoid unused-variable warning] Link: https://lkml.kernel.org/r/20211203190123.874239-1-arnd@kernel.org Link: https://lkml.kernel.org/r/20211129205548.605569-1-mcgrof@kernel.org Link: https://lkml.kernel.org/r/20211129205548.605569-2-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
Provide a way to share unsigned long values. This will allow others to not have to re-invent these values. Link: https://lkml.kernel.org/r/20211124231435.1445213-9-mcgrof@kernel.orgSigned-off-by:
-
Xiaoming Ni authored
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the stack_erasing sysctl from kernel/sysctl.c to kernel/stackleak.c and use register_sysctl() to register the sysctl interface. [mcgrof@kernel.org: commit log update] Link: https://lkml.kernel.org/r/20211124231435.1445213-8-mcgrof@kernel.orgSigned-off-by:
-
Xiaoming Ni authored
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the sg-big-buff sysctl from kernel/sysctl.c to drivers/scsi/sg.c and use register_sysctl() to register the sysctl interface. [mcgrof@kernel.org: commit log update] Link: https://lkml.kernel.org/r/20211124231435.1445213-7-mcgrof@kernel.orgSigned-off-by:
-
Xiaoming Ni authored
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move printk sysctl from kernel/sysctl.c to kernel/printk/sysctl.c. Use register_sysctl() to register the sysctl interface. [mcgrof@kernel.org: fixed compile issues when PRINTK is not set, commit log update] Link: https://lkml.kernel.org/r/20211124231435.1445213-6-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. This moves the binfmt_misc sysctl to its own file to help remove clutter from kernel/sysctl.c. Link: https://lkml.kernel.org/r/20211124231435.1445213-5-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
The way to create a subdirectory on top of sysctl_mount_point is a bit obscure, and *why* we do that even so more. Provide a helper which makes it clear why we do this. [akpm@linux-foundation.org: export register_sysctl_mount_point() to modules] Link: https://lkml.kernel.org/r/20211124231435.1445213-4-mcgrof@kernel.orgSigned-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by:
-
Xiaoming Ni authored
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the random sysctls to their own file and use register_sysctl_init(). [mcgrof@kernel.org: commit log update to justify the move] Link: https://lkml.kernel.org/r/20211124231435.1445213-3-mcgrof@kernel.orgSigned-off-by:
-
Xiaoming Ni authored
Patch series "sysctl: 3rd set of kernel/sysctl cleanups", v2. This is the third set of patches to help address cleaning the kitchen seink in kernel/sysctl.c and to move sysctls away to where they are actually implemented / used. This patch (of 8): kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the firmware configuration sysctl table to the only place where it is used, and make it clear that if sysctls are disabled this is not used. [akpm@linux-foundation.org: export register_firmware_config_sysctl and unregister_firmware_config_sysctl to modules] [akpm@linux-foundation.org: use EXPORT_SYMBOL_NS_GPL instead] [sfr@canb.auug.org.au: fix that so it compiles] Link: https://lkml.kernel.org/r/20211201160626.401d828d@canb.auug.org.au [mcgrof@kernel.org: major commit log update to justify the move] Link: https://lkml.kernel.org/r/20211124231435.1445213-1-mcgrof@kernel.org Link: https://lkml.kernel.org/r/20211124231435.1445213-2-mcgrof@kernel.orgSigned-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Stephen Kitt <steve@sk2.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Antti Palosaari <crope@iki.fi> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Mark Fasheh <mark@fasheh.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Xiaoming Ni authored
The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the epoll_table sysctl to fs/eventpoll.c and use register_sysctl(). Link: https://lkml.kernel.org/r/20211123202422.819032-9-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
There is no need to user boiler plate code to specify a set of base directories we're going to stuff sysctls under. Simplify this by using register_sysctl() and specifying the directory path directly. // pycocci sysctl-subdir-register-sysctl-simplify.cocci PATH @c1@ expression E1; identifier subdir, sysctls; @@ static struct ctl_table subdir[] = { { .procname = E1, .maxlen = 0, .mode = 0555, .child = sysctls, }, { } }; @c2@ identifier c1.subdir; expression E2; identifier base; @@ static struct ctl_table base[] = { { .procname = E2, .maxlen = 0, .mode = 0555, .child = subdir, }, { } }; @c3@ identifier c2.base; identifier header; @@ header = register_sysctl_table(base); @r1 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.subdir, c1.sysctls; @@ -static struct ctl_table subdir[] = { - { - .procname = E1, - .maxlen = 0, - .mode = 0555, - .child = sysctls, - }, - { } -}; @r2 depends on c1 && c2 && c3@ identifier c1.subdir; expression c2.E2; identifier c2.base; @@ -static struct ctl_table base[] = { - { - .procname = E2, - .maxlen = 0, - .mode = 0555, - .child = subdir, - }, - { } -}; @initialize:python@ @@ def make_my_fresh_expression(s1, s2): return '"' + s1.strip('"') + "/" + s2.strip('"') + '"' @r3 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.sysctls; expression c2.E2; identifier c2.base; identifier c3.header; fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) }; @@ header = -register_sysctl_table(base); +register_sysctl(E3, sysctls); Generated-by: Coccinelle SmPL Link: https://lkml.kernel.org/r/20211123202422.819032-8-mcgrof@kernel.orgSigned-off-by: -
Xiaoming Ni authored
There is no need to user boiler plate code to specify a set of base directories we're going to stuff sysctls under. Simplify this by using register_sysctl() and specifying the directory path directly. Move inotify_user sysctl to inotify_user.c while at it to remove clutter from kernel/sysctl.c. [mcgrof@kernel.org: remember to register fanotify_table] Link: https://lkml.kernel.org/r/YZ5A6iWLb0h3N3RC@bombadil.infradead.org [mcgrof@kernel.org: update commit log to reflect new path we decided to take] Link: https://lkml.kernel.org/r/20211123202422.819032-7-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
There is no need to user boiler plate code to specify a set of base directories we're going to stuff sysctls under. Simplify this by using register_sysctl() and specifying the directory path directly. // pycocci sysctl-subdir-register-sysctl-simplify.cocci lib/test_sysctl.c @c1@ expression E1; identifier subdir, sysctls; @@ static struct ctl_table subdir[] = { { .procname = E1, .maxlen = 0, .mode = 0555, .child = sysctls, }, { } }; @c2@ identifier c1.subdir; expression E2; identifier base; @@ static struct ctl_table base[] = { { .procname = E2, .maxlen = 0, .mode = 0555, .child = subdir, }, { } }; @c3@ identifier c2.base; identifier header; @@ header = register_sysctl_table(base); @r1 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.subdir, c1.sysctls; @@ -static struct ctl_table subdir[] = { - { - .procname = E1, - .maxlen = 0, - .mode = 0555, - .child = sysctls, - }, - { } -}; @r2 depends on c1 && c2 && c3@ identifier c1.subdir; expression c2.E2; identifier c2.base; @@ -static struct ctl_table base[] = { - { - .procname = E2, - .maxlen = 0, - .mode = 0555, - .child = subdir, - }, - { } -}; @initialize:python@ @@ def make_my_fresh_expression(s1, s2): return '"' + s1.strip('"') + "/" + s2.strip('"') + '"' @r3 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.sysctls; expression c2.E2; identifier c2.base; identifier c3.header; fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) }; @@ header = -register_sysctl_table(base); +register_sysctl(E3, sysctls); Generated-by: Coccinelle SmPL Link: https://lkml.kernel.org/r/20211123202422.819032-6-mcgrof@kernel.orgSigned-off-by: -
Luis Chamberlain authored
There is no need to user boiler plate code to specify a set of base directories we're going to stuff sysctls under. Simplify this by using register_sysctl() and specifying the directory path directly. // pycocci sysctl-subdir-register-sysctl-simplify.cocci PATH @c1@ expression E1; identifier subdir, sysctls; @@ static struct ctl_table subdir[] = { { .procname = E1, .maxlen = 0, .mode = 0555, .child = sysctls, }, { } }; @c2@ identifier c1.subdir; expression E2; identifier base; @@ static struct ctl_table base[] = { { .procname = E2, .maxlen = 0, .mode = 0555, .child = subdir, }, { } }; @c3@ identifier c2.base; identifier header; @@ header = register_sysctl_table(base); @r1 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.subdir, c1.sysctls; @@ -static struct ctl_table subdir[] = { - { - .procname = E1, - .maxlen = 0, - .mode = 0555, - .child = sysctls, - }, - { } -}; @r2 depends on c1 && c2 && c3@ identifier c1.subdir; expression c2.E2; identifier c2.base; @@ -static struct ctl_table base[] = { - { - .procname = E2, - .maxlen = 0, - .mode = 0555, - .child = subdir, - }, - { } -}; @initialize:python@ @@ def make_my_fresh_expression(s1, s2): return '"' + s1.strip('"') + "/" + s2.strip('"') + '"' @r3 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.sysctls; expression c2.E2; identifier c2.base; identifier c3.header; fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) }; @@ header = -register_sysctl_table(base); +register_sysctl(E3, sysctls); Generated-by: Coccinelle SmPL Link: https://lkml.kernel.org/r/20211123202422.819032-5-mcgrof@kernel.orgSigned-off-by:Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
