- 25 Apr, 2019 14 commits
-
-
Stanislaw Gruszka authored
Move rt2800usb_txstatus_pending routine to rt2800lib. It will be reused by rt2800mmio code. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Stanislaw Gruszka authored
Use new flush_queue() callback for SoC devices, what was already done for PCIe devices. Signed-off-by:
-
Stanislaw Gruszka authored
Do not disable txstatus interrupt and add quota of processed tx statuses in one tasklet. Quota is needed to allow to fed device with new frames during processing of tx statuses. Patch fixes about 15% performance degradation on some scenarios caused by 0b0d556e ("rt2800mmio: use txdone/txstatus routines from lib"). Signed-off-by:
-
Aditya Pakki authored
kmalloc can fail in rsi_register_rates_channels but memcpy still attempts to write to channels. The patch replaces these calls with kmemdup and passes the error upstream. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Tomislav Požega authored
Remove space leftovers. Signed-off-by:
Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by:
-
Stanislaw Gruszka authored
For unknown reasons printk() on some context can cause CPU hung on embedded MT7620 AP/router MIPS platforms. What can result on wifi disconnects. This patch move queue full messages to debug level what is consistent with other mac80211 drivers which drop packet silently if tx queue is full. This make MT7620 OpenWRT routers more stable, what was reported by various users. Signed-off-by:
-
Stanislaw Gruszka authored
Some USB host devices/drivers on some conditions can always return EPROTO error on submitted URBs. That can cause infinity loop in the rt2x00 driver. Since we can have single EPROTO errors we can not mark as device as removed to avoid infinity loop. However we can count consecutive EPROTO errors and mark device as removed if get lot of it. I choose number 10 as threshold. Reported-and-tested-by:
Randy Oostdyk <linux-kernel@oostdyk.com> Signed-off-by:
-
Stanislaw Gruszka authored
As reported by Randy we can overwhelm logs on some USB error conditions. To avoid that use dev_warn_ratelimited() and dev_err_ratelimitd(). Reported-and-tested-by:
-
Kangjie Lu authored
In case create_singlethread_workqueue fails, the fix free the hardware and returns NULL to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
YueHaibing authored
Syzkaller report this: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 4492 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:sysfs_remove_file_ns+0x27/0x70 fs/sysfs/file.c:468 Code: 00 00 00 41 54 55 48 89 fd 53 49 89 d4 48 89 f3 e8 ee 76 9c ff 48 8d 7d 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 2d 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 8b 6d RSP: 0018:ffff8881e9d9fc00 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffffffff900367e0 RCX: ffffffff81a95952 RDX: 0000000000000006 RSI: ffffc90001405000 RDI: 0000000000000030 RBP: 0000000000000000 R08: fffffbfff1fa22ed R09: fffffbfff1fa22ed R10: 0000000000000001 R11: fffffbfff1fa22ec R12: 0000000000000000 R13: ffffffffc1abdac0 R14: 1ffff1103d3b3f8b R15: 0000000000000000 FS: 00007fe409dc1700(0000) GS:ffff8881f1200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2d721000 CR3: 00000001e98b6005 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: sysfs_remove_file include/linux/sysfs.h:519 [inline] driver_remove_file+0x40/0x50 drivers/base/driver.c:122 pcmcia_remove_newid_file drivers/pcmcia/ds.c:163 [inline] pcmcia_unregister_driver+0x7d/0x2b0 drivers/pcmcia/ds.c:209 ssb_modexit+0xa/0x1b [ssb] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe409dc0c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe409dc16bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Modules linked in: ssb(-) 3c59x nvme_core macvlan tap pata_hpt3x3 rt2x00pci null_blk tsc40 pm_notifier_error_inject notifier_error_inject mdio cdc_wdm nf_reject_ipv4 ath9k_common ath9k_hw ath pppox ppp_generic slhc ehci_platform wl12xx wlcore tps6507x_ts ioc4 nf_synproxy_core ide_gd_mod ax25 can_dev iwlwifi can_raw atm tm2_touchkey can_gw can sundance adp5588_keys rt2800mmio rt2800lib rt2x00mmio rt2x00lib eeprom_93cx6 pn533 lru_cache elants_i2c ip_set nfnetlink gameport tipc hampshire nhc_ipv6 nhc_hop nhc_udp nhc_fragment nhc_routing nhc_mobility nhc_dest 6lowpan silead brcmutil nfc mt76_usb mt76 mac80211 iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_gre sit hsr veth vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon vcan bridge stp llc ip6_gre ip6_tunnel tunnel6 tun joydev mousedev serio_raw ide_pci_generic piix floppy ide_core sch_fq_codel ip_tables x_tables ipv6 [last unloaded: 3c59x] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 3913cbf8011e1c05 ]--- In ssb_modinit, it does not fail SSB init when ssb_host_pcmcia_init failed, however in ssb_modexit, ssb_host_pcmcia_exit calls pcmcia_unregister_driver unconditionally, which may tigger a NULL pointer dereference issue as above. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 399500da ("ssb: pick PCMCIA host code support from b43 driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Use remove_proc_subtree to remove the whole subtree Signed-off-by:
-
YueHaibing authored
init_ray_cs does not check value of pcmcia_register_driver, if it fails, there maybe cause a NULL pointer dereference in exit_ray_cs. Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace code of the following form: sizeof(*pmkids) + max_pmkids * sizeof(pmkids->bssid_info[0]) with: struct_size(pmkids, bssid_info, num_pmkids) This code was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2019-04-18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Third batch of patches intended for v5.2 * Bump the 20000-series FW API version supported; * Work on the new debugging infra continues; * One clean-up to prevent a bogus warning with clang; * A small cleanup in the PCI ID list; * Work on new hardware continues; * RTT confidence indication support for FTM; * An improvement in HE rate-scaling;
-
- 19 Apr, 2019 24 commits
-
-
Shahar S Matityahu authored
In case the the trigger occurrences is zero or force_restart is set, the driver sets IWL_FWRT_STATUS_DUMPING without actually scheduling trigger collection. At this point no other dump collection can be performed. Solve this by setting IWL_FWRT_STATUS_DUMPING bit only when the driver is surely going to schedule dump collection Signed-off-by:
Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Nathan Chancellor authored
When building with -Wsometimes-uninitialized, Clang warns: drivers/net/wireless/intel/iwlwifi/mvm/sta.c:2114:12: warning: variable 'queue' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] Clang can't evaluate at this point that WARN(1, ...) always returns true because __ret_warn_on is defined as !!(condition), which isn't immediately evaluated as 1. Change this branch to else so that it's clear to Clang that we intend to bail out here. Link: https://github.com/ClangBuiltLinux/linux/issues/399Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> [added a few more braces] Signed-off-by:
-
Luca Coelho authored
This device ID and device type was never released, so we can remove it from the PCI IDs list. Signed-off-by: -
Avraham Stern authored
The range response notification API has changed to add a value that indicates the confidence of the rtt result. Support the new API and print the rtt confidence for debug. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Shahar S Matityahu authored
Signed-off-by:
-
Shahar S Matityahu authored
Allows to dump periphery memory on ax210 devices. Signed-off-by:
-
Gregory Greenman authored
When building TLC configuration command, consider in case of HE, if LDPC support is turned on in our capabilities. Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
-
Shahar S Matityahu authored
Add debug prints to the ini flow and rewrite existing prints to provide more information Signed-off-by:
-
Shahar S Matityahu authored
Add FW_INFO debug level. This level is enabled if INFO or FW debug levels are set. Also, set fw request and callback prints under this debug level. Signed-off-by:
-
Shahar S Matityahu authored
IWL_FW_INI_REGION_CSR and IWL_FW_INI_REGION_NOTIFICATION does not have memory addresses attached to them so the driver should skip them when parsing the region tlv. Also, instead of declearing what region types should skip the addition of the memory addresses, declare what regions have addition of memory addresses. Signed-off-by:
-
Shaul Triebitz authored
TFD_*_SLOTS and IWL_*_QUEUE_SIZE both define the TX queue size (number of TFDs). Get rid of TFD_*_SLOTS and use only IWL_*_QUEUE_SIZE. Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Shaul Triebitz authored
AX210 devices support 256 BA (256 MPDUs in an AMPDU). The firmware requires that the number of TFDs will be minimum twice as big as the BA size (2 * 256 = 512). Signed-off-by:
-
Luca Coelho authored
Start supporting API version 47 for 22000 series. The 9000 series is now frozen on version 46. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for 5.2. No major changes.
-
David S. Miller authored
David Bauer says: ==================== net: add reset-controller driven PHY reset This patchset adds support for a PHY reset driven by a reset-controller. Currently, only GPIO driven resets are supported by the PHY subsystem. It also renames the reset-gpio from 'reset' to 'reset_gpio' to better differentiate between resets wired to a GPIO and resets wired to a reset-controller driven pin. Some systems have the PHY reset-line wired to a pin controlled by a reset-controller (eg. some Atheros AR9132 based boards). In case the bootloader asserts reset before loading the kernel, we currently do not have a clean way of deasserting reset to probe the PHY. v3: - add missing newline in mdio_bus.c v2: - fixed missed rename of "reset" in at803x.c - move initial reset to mdio_device_reset ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
David Bauer authored
This renames the GPIO reset of mdio devices from 'reset' to 'reset_gpio' to better differentiate between GPIO and reset-controller driven reset line. Signed-off-by:
David Bauer <mail@david-bauer.net> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David Bauer authored
This commit adds support for PHY reset pins handled by a reset controller. Signed-off-by:
-
David Bauer authored
Add the documentation for PHY reset lines controlled by a reset controller. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net: some build fixes and other improvements A few unrelated improvements here, mostly trying to make random configs build and W=1 produce a little less warnings under net/ and drivers net/. First two patches fix set but not used warnings with W=1. Next patch fixes 64bit division in sch_taprio.c. Last two patches are getting rid of some (almost) unused asserts in skbuff.h. ==================== Signed-off-by: -
Jakub Kicinski authored
We are discouraging the use of BUG() these days, remove the unused ASSERT macros from skbuff.h. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
The driver does not advertize NETIF_F_FRAGLIST, the stack can't pass skbs with frags lists to the xmit function. Signed-off-by:
-
Jakub Kicinski authored
Recent changes to taprio did not use the correct div64 helpers, leading to: net/sched/sch_taprio.o: In function `taprio_dequeue': sch_taprio.c:(.text+0x34a): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `advance_sched': sch_taprio.c:(.text+0xa0b): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `taprio_init': sch_taprio.c:(.text+0x1450): undefined reference to `__divdi3' /home/jkicinski/devel/linux/Makefile:1032: recipe for target 'vmlinux' failed Use math64 helpers. Fixes: 7b9eba7b ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
-
Jakub Kicinski authored
GCC 8 complains: drivers/net/sb1000.c: In function ‘card_send_command’: drivers/net/sb1000.c:319:14: warning: variable ‘x’ set but not used [-Wunused-but-set-variable] int status, x; ^ drivers/net/sb1000.c: In function ‘sb1000_check_CRC’: drivers/net/sb1000.c:493:6: warning: variable ‘crc’ set but not used [-Wunused-but-set-variable] int crc, status; ^~~ Signed-off-by: -
Jakub Kicinski authored
GCC complains: net/l2tp/l2tp_ppp.c: In function ‘pppol2tp_ioctl’: net/l2tp/l2tp_ppp.c:1073:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] int val; ^~~ Signed-off-by:
-
- 18 Apr, 2019 2 commits
-
-
Stephen Suryaputra authored
To make ICMPv6 closer to ICMPv4, add ratemask parameter. Since the ICMP message types use larger numeric values, a simple bitmask doesn't fit. I use large bitmap. The input and output are the in form of list of ranges. Set the default to rate limit all error messages but Packet Too Big. For Packet Too Big, use ratemask instead of hard-coded. There are functions where icmpv6_xrlim_allow() and icmpv6_global_allow() aren't called. This patch only adds them to icmpv6_echo_reply(). Rate limiting error messages is mandated by RFC 4443 but RFC 4890 says that it is also acceptable to rate limit informational messages. Thus, I removed the current hard-coded behavior of icmpv6_mask_allow() that doesn't rate limit informational messages. v2: Add dummy function proc_do_large_bitmap() if CONFIG_PROC_SYSCTL isn't defined, expand the description in ip-sysctl.txt and remove unnecessary conditional before kfree(). v3: Inline the bitmap instead of dynamically allocated. Still is a pointer to it is needed because of the way proc_do_large_bitmap work. Signed-off-by:Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
phy_sanitize_settings() is called from phy_start_aneg() only, and only if phydev->autoneg isn't set. Therefore the removed code does nothing. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
