* various small cleanups
* ETHTOOL_GDRVINFO support

into mandrakesoft.com:/home/jgarzik/repo/net-drivers-2.5

- switch to yield function as suggested by you, Arjan and Andrew.
- fixed broken logic in the use of time_before/time_after - possible
bug cause in previous design - in most of the places we were going to sleep
and than check if time expires before checking if condition is satisfied.
If, for example, we needed to wait up to 3 jiffies we could do
schedule_timeout(1) and get up after 4 ticks check that time expired and go
away crying about failure without checking that condition is OK.(in fact I
saw it happen on one SMP platform here).

- added pci flushing in the e100_set_intr_mask function (pci posting bug)
- better logic in the prepare_xmit_buff function moving some tx
buffer initialization code to the start of the function.

- remove dummy defines and also ia64 specific [Arjan's notes  [:-)] ]
- fixed problem in e100_check_options function reported by our Q/A

- minor changes to the license from our technical writer [still GPL ;-)]

* Use likely() and unlikely() for better branch prediction
* Various small cleanups
* Much improved interrupt mitigation
* Much improved throughput

RX_MODE was not set for the multicast case.  Set it.  Fixes multicast.

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

1) Fix EBUS register probing
2) Add some missing ioctl32 translations
3) Add sys_futex entries for sparc/sparc64
4) Add platform-specific pcibios_set_mwi implementation
   for sparc64
5) Fix set_brkpkt implementation so it works on UltraSPARC-III

Fixed a panic caused by the line discipline echoing characters. It
also fixes a problem where the echoing messes up ppp chat.

by struct sock cleanups.

  
Here is patch against linuxusb.bkbits.net LINUX_2.4.19-pre2 export, which
adds Emagic EMI 2|6 usb audio interface firmware loader support to linux
kernel.
I also have other kernel patches and emi26 cvs export available at:
http://www.vtoy.fi/~tapio/emi26.html

- CodingStyle cleanups
- Adds MODULE_LICENSE
- Fix missing release_sock calls
- Remove leftovers from sock cleanup patches
- Use skb_queue_purge

Fixed bug that prevented multiple edgeport devices from working at once.

Elcon vendor/device support added.

This is a major update of the bttv core (0.7.x to 0.8.x).  There are way
too many changes to list them all, the complete core code for video
frame capture has been rewritten from scratch.

This patch updates the documentation for the bttv driver.

This patch is a update for the tuner module which controls the tuner
chip on TV cards.  No major changes, lots of small cleanups: make
functions static, switch to name-based initialization for structs, ...

This patch adds a helper module to manage pci dma buffers for video
frames.  I've recently started writing a driver for another frame
grabber / TV card chip and tried to separate out common code to avoid
duplicating code.  The bttv core update (next mail) depends this patch.

This patch updates the i2c audio chip modules.  It improves the support
for tda9874x chips.  There are some bugfixes.  It also has alot of small
cleanups: switch some modules to new initialization, declare lots of
functions static, ...  which make the patch a bit large.

This patch updates the btaudio sound driver.  It fixes a bug in the poll
function, makes the driver a bit more verbose at insmod time, adds a
insmod option for the pci latency timer and does some minor cleanups.

This patch updates the Winbond w9966cf parport webcam driver.

This patch updates the mediavision pms video driver.

This patch adapts the DSB usb radio driver to the videodev changes.

This is the update for the trust radio driver.

This patch updates the vicam usb camera driver.  videodev adaptions are
there, and the unplug race fix.  I also did plenty of other small
cleanups and fixes, lots of forgotten breaks in the big ioctl switch for
example.  I wouldn't be surprised if the driver didn't work at all ...

This patch updates the saa5249 videotext driver.

This patch updates the parallel port quickcam drivers (bw+color).

This patch adapts the se401 driver to the videodev changes and fixes the
unplug race.

This patch adapts the philips webcam driver to the videodev changes.
Also has the unplug race fix.

This patch adapts the ov511 driver to the videodev changes.  As Mark
McClelland already sent in a patch with updates this just deletes the
now obsolete code for the most part.  The unplug-while-in-use race fix
is also there.

This patch adapts the stv usb camera driver to the videodev changes and
fixes the unplug race.

This patch updates the cpia driver.

Additionally to the usual adoptions to the videodev changes done in all
drivers this patch has a few more changes:

 - some cleanups in the drivers open() function.
 - Use file->private_data to keep a pointer to the drivers private
   data.  This allows to unregister the device unconditionally in
   disconnect(), which in turn fixes some small races in case the
   device is unplugged while in use.

This is the update for the typhoon radio driver.

This is the update for the terratec radio driver.