1. 25 Apr, 2020 9 commits
  2. 23 Apr, 2020 1 commit
  3. 21 Apr, 2020 5 commits
    • Luke Nelson's avatar
      bpf, selftests: Add test for BPF_STX BPF_B storing R10 · d2b6c3ab
      Luke Nelson authored
      This patch adds a test to test_verifier that writes the lower 8 bits of
      R10 (aka FP) using BPF_B to an array map and reads the result back. The
      expected behavior is that the result should be the same as first copying
      R10 to R9, and then storing / loading the lower 8 bits of R9.
      
      This test catches a bug that was present in the x86-64 JIT that caused
      an incorrect encoding for BPF_STX BPF_B when the source operand is R10.
      Signed-off-by: default avatarXi Wang <xi.wang@gmail.com>
      Signed-off-by: default avatarLuke Nelson <luke.r.nels@gmail.com>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Link: https://lore.kernel.org/bpf/20200418232655.23870-2-luke.r.nels@gmail.com
      d2b6c3ab
    • Luke Nelson's avatar
      bpf, x86: Fix encoding for lower 8-bit registers in BPF_STX BPF_B · aee194b1
      Luke Nelson authored
      This patch fixes an encoding bug in emit_stx for BPF_B when the source
      register is BPF_REG_FP.
      
      The current implementation for BPF_STX BPF_B in emit_stx saves one REX
      byte when the operands can be encoded using Mod-R/M alone. The lower 8
      bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using
      a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers,
      (e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit
      equivalents (%sil, %dil, %bpl, %spl).
      
      The current code checks if the source for BPF_STX BPF_B is BPF_REG_1
      or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the
      required REX prefix. However, it misses the case when the source is
      BPF_REG_FP (mapped to %rbp).
      
      The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand
      will read from register %ch instead of the correct %bpl. This patch fixes
      the problem by fixing and refactoring the check on which registers need
      the extra REX byte. Since no BPF registers map to %rsp, there is no need
      to handle %spl.
      
      Fixes: 62258278 ("net: filter: x86: internal BPF JIT")
      Signed-off-by: default avatarXi Wang <xi.wang@gmail.com>
      Signed-off-by: default avatarLuke Nelson <luke.r.nels@gmail.com>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Link: https://lore.kernel.org/bpf/20200418232655.23870-1-luke.r.nels@gmail.com
      aee194b1
    • Jann Horn's avatar
      bpf: Fix handling of XADD on BTF memory · 8ff3571f
      Jann Horn authored
      check_xadd() can cause check_ptr_to_btf_access() to be executed with
      atype==BPF_READ and value_regno==-1 (meaning "just check whether the access
      is okay, don't tell me what type it will result in").
      Handle that case properly and skip writing type information, instead of
      indexing into the registers at index -1 and writing into out-of-bounds
      memory.
      
      Note that at least at the moment, you can't actually write through a BTF
      pointer, so check_xadd() will reject the program after calling
      check_ptr_to_btf_access with atype==BPF_WRITE; but that's after the
      verifier has already corrupted memory.
      
      This patch assumes that BTF pointers are not available in unprivileged
      programs.
      
      Fixes: 9e15db66 ("bpf: Implement accurate raw_tp context access via BTF")
      Signed-off-by: default avatarJann Horn <jannh@google.com>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Link: https://lore.kernel.org/bpf/20200417000007.10734-2-jannh@google.com
      8ff3571f
    • Jann Horn's avatar
      bpf: Forbid XADD on spilled pointers for unprivileged users · 6e7e63cb
      Jann Horn authored
      When check_xadd() verifies an XADD operation on a pointer to a stack slot
      containing a spilled pointer, check_stack_read() verifies that the read,
      which is part of XADD, is valid. However, since the placeholder value -1 is
      passed as `value_regno`, check_stack_read() can only return a binary
      decision and can't return the type of the value that was read. The intent
      here is to verify whether the value read from the stack slot may be used as
      a SCALAR_VALUE; but since check_stack_read() doesn't check the type, and
      the type information is lost when check_stack_read() returns, this is not
      enforced, and a malicious user can abuse XADD to leak spilled kernel
      pointers.
      
      Fix it by letting check_stack_read() verify that the value is usable as a
      SCALAR_VALUE if no type information is passed to the caller.
      
      To be able to use __is_pointer_value() in check_stack_read(), move it up.
      
      Fix up the expected unprivileged error message for a BPF selftest that,
      until now, assumed that unprivileged users can use XADD on stack-spilled
      pointers. This also gives us a test for the behavior introduced in this
      patch for free.
      
      In theory, this could also be fixed by forbidding XADD on stack spills
      entirely, since XADD is a locked operation (for operations on memory with
      concurrency) and there can't be any concurrency on the BPF stack; but
      Alexei has said that he wants to keep XADD on stack slots working to avoid
      changes to the test suite [1].
      
      The following BPF program demonstrates how to leak a BPF map pointer as an
      unprivileged user using this bug:
      
          // r7 = map_pointer
          BPF_LD_MAP_FD(BPF_REG_7, small_map),
          // r8 = launder(map_pointer)
          BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_7, -8),
          BPF_MOV64_IMM(BPF_REG_1, 0),
          ((struct bpf_insn) {
            .code  = BPF_STX | BPF_DW | BPF_XADD,
            .dst_reg = BPF_REG_FP,
            .src_reg = BPF_REG_1,
            .off = -8
          }),
          BPF_LDX_MEM(BPF_DW, BPF_REG_8, BPF_REG_FP, -8),
      
          // store r8 into map
          BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_7),
          BPF_MOV64_REG(BPF_REG_ARG2, BPF_REG_FP),
          BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG2, -4),
          BPF_ST_MEM(BPF_W, BPF_REG_ARG2, 0, 0),
          BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
          BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1),
          BPF_EXIT_INSN(),
          BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_8, 0),
      
          BPF_MOV64_IMM(BPF_REG_0, 0),
          BPF_EXIT_INSN()
      
      [1] https://lore.kernel.org/bpf/20200416211116.qxqcza5vo2ddnkdq@ast-mbp.dhcp.thefacebook.com/
      
      Fixes: 17a52670 ("bpf: verifier (add verifier core)")
      Signed-off-by: default avatarJann Horn <jannh@google.com>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Link: https://lore.kernel.org/bpf/20200417000007.10734-1-jannh@google.com
      6e7e63cb
    • Toke Høiland-Jørgensen's avatar
      cpumap: Avoid warning when CONFIG_DEBUG_PER_CPU_MAPS is enabled · bc23d0e3
      Toke Høiland-Jørgensen authored
      When the kernel is built with CONFIG_DEBUG_PER_CPU_MAPS, the cpumap code
      can trigger a spurious warning if CONFIG_CPUMASK_OFFSTACK is also set. This
      happens because in this configuration, NR_CPUS can be larger than
      nr_cpumask_bits, so the initial check in cpu_map_alloc() is not sufficient
      to guard against hitting the warning in cpumask_check().
      
      Fix this by explicitly checking the supplied key against the
      nr_cpumask_bits variable before calling cpu_possible().
      
      Fixes: 6710e112 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
      Reported-by: default avatarXiumei Mu <xmu@redhat.com>
      Signed-off-by: default avatarToke Høiland-Jørgensen <toke@redhat.com>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Tested-by: default avatarXiumei Mu <xmu@redhat.com>
      Acked-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
      Acked-by: default avatarSong Liu <songliubraving@fb.com>
      Link: https://lore.kernel.org/bpf/20200416083120.453718-1-toke@redhat.com
      bc23d0e3
  4. 20 Apr, 2020 16 commits
    • David S. Miller's avatar
    • Zhu Yanjun's avatar
      net/mlx5e: Get the latest values from counters in switchdev mode · dcdf4ce0
      Zhu Yanjun authored
      In the switchdev mode, when running "cat
      /sys/class/net/NIC/statistics/tx_packets", the ppcnt register is
      accessed to get the latest values. But currently this command can
      not get the correct values from ppcnt.
      
      From firmware manual, before getting the 802_3 counters, the 802_3
      data layout should be set to the ppcnt register.
      
      When the command "cat /sys/class/net/NIC/statistics/tx_packets" is
      run, before updating 802_3 data layout with ppcnt register, the
      monitor counters are tested. The test result will decide the
      802_3 data layout is updated or not.
      
      Actually the monitor counters do not support to monitor rx/tx
      stats of 802_3 in switchdev mode. So the rx/tx counters change
      will not trigger monitor counters. So the 802_3 data layout will
      not be updated in ppcnt register. Finally this command can not get
      the latest values from ppcnt register with 802_3 data layout.
      
      Fixes: 5c7e8bbb ("net/mlx5e: Use monitor counters for update stats")
      Signed-off-by: default avatarZhu Yanjun <yanjunz@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      dcdf4ce0
    • Saeed Mahameed's avatar
      net/mlx5: Kconfig: convert imply usage to weak dependency · 96c34151
      Saeed Mahameed authored
      MLX5_CORE uses the 'imply' keyword to depend on VXLAN, PTP_1588_CLOCK,
      MLXFW and PCI_HYPERV_INTERFACE.
      
      This was useful to force vxlan, ptp, etc.. to be reachable to mlx5
      regardless of their config states.
      
      Due to the changes in the cited commit below, the semantics of 'imply'
      was changed to not force any restriction on the implied config.
      
      As a result of this change, the compilation of MLX5_CORE=y and VXLAN=m
      would result in undefined references, as VXLAN now would stay as 'm'.
      
      To fix this we change MLX5_CORE to have a weak dependency on
      these modules/configs and make sure they are reachable, by adding:
      depend on symbol || !symbol.
      
      For example: VXLAN=m MLX5_CORE=y, this will force MLX5_CORE to m
      
      Fixes: def2fbff ("kconfig: allow symbols implied by y to become m")
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Cc: Masahiro Yamada <masahiroy@kernel.org>
      Cc: Nicolas Pitre <nico@fluxnic.net>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Reported-by: default avatarRandy Dunlap <rdunlap@infradead.org>
      96c34151
    • Maxim Mikityanskiy's avatar
      net/mlx5e: Don't trigger IRQ multiple times on XSK wakeup to avoid WQ overruns · e7e0004a
      Maxim Mikityanskiy authored
      XSK wakeup function triggers NAPI by posting a NOP WQE to a special XSK
      ICOSQ. When the application floods the driver with wakeup requests by
      calling sendto() in a certain pattern that ends up in mlx5e_trigger_irq,
      the XSK ICOSQ may overflow.
      
      Multiple NOPs are not required and won't accelerate the process, so
      avoid posting a second NOP if there is one already on the way. This way
      we also avoid increasing the queue size (which might not help anyway).
      
      Fixes: db05815b ("net/mlx5e: Add XSK zero-copy support")
      Signed-off-by: default avatarMaxim Mikityanskiy <maximmi@mellanox.com>
      Reviewed-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      e7e0004a
    • Paul Blakey's avatar
      net/mlx5: CT: Change idr to xarray to protect parallel tuple id allocation · 70840b66
      Paul Blakey authored
      After allowing parallel tuple insertion, we get the following trace:
      
      [ 5505.142249] ------------[ cut here ]------------
      [ 5505.148155] WARNING: CPU: 21 PID: 13313 at lib/radix-tree.c:581 delete_node+0x16c/0x180
      [ 5505.295553] CPU: 21 PID: 13313 Comm: kworker/u50:22 Tainted: G           OE     5.6.0+ #78
      [ 5505.304824] Hardware name: Supermicro Super Server/X10DRT-P, BIOS 2.0b 03/30/2017
      [ 5505.313740] Workqueue: nf_flow_table_offload flow_offload_work_handler [nf_flow_table]
      [ 5505.323257] RIP: 0010:delete_node+0x16c/0x180
      [ 5505.349862] RSP: 0018:ffffb19184eb7b30 EFLAGS: 00010282
      [ 5505.356785] RAX: 0000000000000000 RBX: ffff904ac95b86d8 RCX: ffff904b6f938838
      [ 5505.365190] RDX: 0000000000000000 RSI: ffff904ac954b908 RDI: ffff904ac954b920
      [ 5505.373628] RBP: ffff904b4ac13060 R08: 0000000000000001 R09: 0000000000000000
      [ 5505.382155] R10: 0000000000000000 R11: 0000000000000040 R12: 0000000000000000
      [ 5505.390527] R13: ffffb19184eb7bfc R14: ffff904b6bef5800 R15: ffff90482c1203c0
      [ 5505.399246] FS:  0000000000000000(0000) GS:ffff904c2fc80000(0000) knlGS:0000000000000000
      [ 5505.408621] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [ 5505.415739] CR2: 00007f5d27006010 CR3: 0000000058c10006 CR4: 00000000001626e0
      [ 5505.424547] Call Trace:
      [ 5505.428429]  idr_alloc_u32+0x7b/0xc0
      [ 5505.433803]  mlx5_tc_ct_entry_add_rule+0xbf/0x950 [mlx5_core]
      [ 5505.441354]  ? mlx5_fc_create+0x23c/0x370 [mlx5_core]
      [ 5505.448225]  mlx5_tc_ct_block_flow_offload+0x874/0x10b0 [mlx5_core]
      [ 5505.456278]  ? mlx5_tc_ct_block_flow_offload+0x63d/0x10b0 [mlx5_core]
      [ 5505.464532]  nf_flow_offload_tuple.isra.21+0xc5/0x140 [nf_flow_table]
      [ 5505.472286]  ? __kmalloc+0x217/0x2f0
      [ 5505.477093]  ? flow_rule_alloc+0x1c/0x30
      [ 5505.482117]  flow_offload_work_handler+0x1d0/0x290 [nf_flow_table]
      [ 5505.489674]  ? process_one_work+0x17c/0x580
      [ 5505.494922]  process_one_work+0x202/0x580
      [ 5505.500082]  ? process_one_work+0x17c/0x580
      [ 5505.505696]  worker_thread+0x4c/0x3f0
      [ 5505.510458]  kthread+0x103/0x140
      [ 5505.514989]  ? process_one_work+0x580/0x580
      [ 5505.520616]  ? kthread_bind+0x10/0x10
      [ 5505.525837]  ret_from_fork+0x3a/0x50
      [ 5505.570841] ---[ end trace 07995de9c56d6831 ]---
      
      This happens from parallel deletes/adds to idr, as idr isn't protected.
      Fix that by using xarray as the tuple_ids allocator instead of idr.
      
      Fixes: 7da182a9 ("netfilter: flowtable: Use work entry per offload command")
      Reviewed-by: default avatarRoi Dayan <roid@mellanox.com>
      Signed-off-by: default avatarPaul Blakey <paulb@mellanox.com>
      Reviewed-by: default avatarOz Shlomo <ozsh@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      70840b66
    • Niklas Schnelle's avatar
      net/mlx5: Fix failing fw tracer allocation on s390 · a019b361
      Niklas Schnelle authored
      On s390 FORCE_MAX_ZONEORDER is 9 instead of 11, thus a larger kzalloc()
      allocation as done for the firmware tracer will always fail.
      
      Looking at mlx5_fw_tracer_save_trace(), it is actually the driver itself
      that copies the debug data into the trace array and there is no need for
      the allocation to be contiguous in physical memory. We can therefor use
      kvzalloc() instead of kzalloc() and get rid of the large contiguous
      allcoation.
      
      Fixes: f53aaa31 ("net/mlx5: FW tracer, implement tracer logic")
      Signed-off-by: default avatarNiklas Schnelle <schnelle@linux.ibm.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      a019b361
    • Taehee Yoo's avatar
      team: fix hang in team_mode_get() · 1c30fbc7
      Taehee Yoo authored
      When team mode is changed or set, the team_mode_get() is called to check
      whether the mode module is inserted or not. If the mode module is not
      inserted, it calls the request_module().
      In the request_module(), it creates a child process, which is
      the "modprobe" process and waits for the done of the child process.
      At this point, the following locks were used.
      down_read(&cb_lock()); by genl_rcv()
          genl_lock(); by genl_rcv_msc()
              rtnl_lock(); by team_nl_cmd_options_set()
                  mutex_lock(&team->lock); by team_nl_team_get()
      
      Concurrently, the team module could be removed by rmmod or "modprobe -r"
      The __exit function of team module is team_module_exit(), which calls
      team_nl_fini() and it tries to acquire following locks.
      down_write(&cb_lock);
          genl_lock();
      Because of the genl_lock() and cb_lock, this process can't be finished
      earlier than request_module() routine.
      
      The problem secenario.
      CPU0                                     CPU1
      team_mode_get
          request_module()
                                               modprobe -r team_mode_roundrobin
                                                           team <--(B)
              modprobe team <--(A)
                  team_mode_roundrobin
      
      By request_module(), the "modprobe team_mode_roundrobin" command
      will be executed. At this point, the modprobe process will decide
      that the team module should be inserted before team_mode_roundrobin.
      Because the team module is being removed.
      
      By the module infrastructure, the same module insert/remove operations
      can't be executed concurrently.
      So, (A) waits for (B) but (B) also waits for (A) because of locks.
      So that the hang occurs at this point.
      
      Test commands:
          while :
          do
              teamd -d &
      	killall teamd &
      	modprobe -rv team_mode_roundrobin &
          done
      
      The approach of this patch is to hold the reference count of the team
      module if the team module is compiled as a module. If the reference count
      of the team module is not zero while request_module() is being called,
      the team module will not be removed at that moment.
      So that the above scenario could not occur.
      
      Fixes: 3d249d4c ("net: introduce ethernet teaming device")
      Signed-off-by: default avatarTaehee Yoo <ap420073@gmail.com>
      Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1c30fbc7
    • David S. Miller's avatar
      Merge branch 'mptcp-fix-races-on-accept' · 0b943d90
      David S. Miller authored
      Paolo Abeni says:
      
      ====================
      mptcp: fix races on accept()
      
      This series includes some fixes for accept() races which may cause inconsistent
      MPTCP socket status and oops. Please see the individual patches for the
      technical details.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0b943d90
    • Paolo Abeni's avatar
      mptcp: drop req socket remote_key* fields · fca5c82c
      Paolo Abeni authored
      We don't need them, as we can use the current ingress opt
      data instead. Setting them in syn_recv_sock() may causes
      inconsistent mptcp socket status, as per previous commit.
      
      Fixes: cc7972ea ("mptcp: parse and emit MP_CAPABLE option according to v1 spec")
      Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fca5c82c
    • Paolo Abeni's avatar
      mptcp: avoid flipping mp_capable field in syn_recv_sock() · 4c8941de
      Paolo Abeni authored
      If multiple CPUs races on the same req_sock in syn_recv_sock(),
      flipping such field can cause inconsistent child socket status.
      
      When racing, the CPU losing the req ownership may still change
      the mptcp request socket mp_capable flag while the CPU owning
      the request is cloning the socket, leaving the child socket with
      'is_mptcp' set but no 'mp_capable' flag.
      
      Such socket will stay with 'conn' field cleared, heading to oops
      in later mptcp callback.
      
      Address the issue tracking the fallback status in a local variable.
      
      Fixes: 58b09919 ("mptcp: create msk early")
      Co-developed-by: default avatarFlorian Westphal <fw@strlen.de>
      Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4c8941de
    • Florian Westphal's avatar
      mptcp: handle mptcp listener destruction via rcu · 5e20087d
      Florian Westphal authored
      Following splat can occur during self test:
      
       BUG: KASAN: use-after-free in subflow_data_ready+0x156/0x160
       Read of size 8 at addr ffff888100c35c28 by task mptcp_connect/4808
      
        subflow_data_ready+0x156/0x160
        tcp_child_process+0x6a3/0xb30
        tcp_v4_rcv+0x2231/0x3730
        ip_protocol_deliver_rcu+0x5c/0x860
        ip_local_deliver_finish+0x220/0x360
        ip_local_deliver+0x1c8/0x4e0
        ip_rcv_finish+0x1da/0x2f0
        ip_rcv+0xd0/0x3c0
        __netif_receive_skb_one_core+0xf5/0x160
        __netif_receive_skb+0x27/0x1c0
        process_backlog+0x21e/0x780
        net_rx_action+0x35f/0xe90
        do_softirq+0x4c/0x50
        [..]
      
      This occurs when accessing subflow_ctx->conn.
      
      Problem is that tcp_child_process() calls listen sockets'
      sk_data_ready() notification, but it doesn't hold the listener
      lock.  Another cpu calling close() on the listener will then cause
      transition of refcount to 0.
      
      Fixes: 58b09919 ("mptcp: create msk early")
      Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5e20087d
    • Rahul Lakkireddy's avatar
      cxgb4: fix large delays in PTP synchronization · bd019427
      Rahul Lakkireddy authored
      Fetching PTP sync information from mailbox is slow and can take
      up to 10 milliseconds. Reduce this unnecessary delay by directly
      reading the information from the corresponding registers.
      
      Fixes: 9c33e420 ("cxgb4: Add PTP Hardware Clock (PHC) support")
      Signed-off-by: default avatarManoj Malviya <manojmalviya@chelsio.com>
      Signed-off-by: default avatarRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bd019427
    • Marc Zyngier's avatar
      net: stmmac: dwmac-meson8b: Add missing boundary to RGMII TX clock array · f0212a5e
      Marc Zyngier authored
      Running with KASAN on a VIM3L systems leads to the following splat
      when probing the Ethernet device:
      
      ==================================================================
      BUG: KASAN: global-out-of-bounds in _get_maxdiv+0x74/0xd8
      Read of size 4 at addr ffffa000090615f4 by task systemd-udevd/139
      CPU: 1 PID: 139 Comm: systemd-udevd Tainted: G            E     5.7.0-rc1-00101-g8624b7577b9c #781
      Hardware name: amlogic w400/w400, BIOS 2020.01-rc5 03/12/2020
      Call trace:
       dump_backtrace+0x0/0x2a0
       show_stack+0x20/0x30
       dump_stack+0xec/0x148
       print_address_description.isra.12+0x70/0x35c
       __kasan_report+0xfc/0x1d4
       kasan_report+0x4c/0x68
       __asan_load4+0x9c/0xd8
       _get_maxdiv+0x74/0xd8
       clk_divider_bestdiv+0x74/0x5e0
       clk_divider_round_rate+0x80/0x1a8
       clk_core_determine_round_nolock.part.9+0x9c/0xd0
       clk_core_round_rate_nolock+0xf0/0x108
       clk_hw_round_rate+0xac/0xf0
       clk_factor_round_rate+0xb8/0xd0
       clk_core_determine_round_nolock.part.9+0x9c/0xd0
       clk_core_round_rate_nolock+0xf0/0x108
       clk_core_round_rate_nolock+0xbc/0x108
       clk_core_set_rate_nolock+0xc4/0x2e8
       clk_set_rate+0x58/0xe0
       meson8b_dwmac_probe+0x588/0x72c [dwmac_meson8b]
       platform_drv_probe+0x78/0xd8
       really_probe+0x158/0x610
       driver_probe_device+0x140/0x1b0
       device_driver_attach+0xa4/0xb0
       __driver_attach+0xcc/0x1c8
       bus_for_each_dev+0xf4/0x168
       driver_attach+0x3c/0x50
       bus_add_driver+0x238/0x2e8
       driver_register+0xc8/0x1e8
       __platform_driver_register+0x88/0x98
       meson8b_dwmac_driver_init+0x28/0x1000 [dwmac_meson8b]
       do_one_initcall+0xa8/0x328
       do_init_module+0xe8/0x368
       load_module+0x3300/0x36b0
       __do_sys_finit_module+0x120/0x1a8
       __arm64_sys_finit_module+0x4c/0x60
       el0_svc_common.constprop.2+0xe4/0x268
       do_el0_svc+0x98/0xa8
       el0_svc+0x24/0x68
       el0_sync_handler+0x12c/0x318
       el0_sync+0x158/0x180
      
      The buggy address belongs to the variable:
       div_table.63646+0x34/0xfffffffffffffa40 [dwmac_meson8b]
      
      Memory state around the buggy address:
       ffffa00009061480: fa fa fa fa 00 00 00 01 fa fa fa fa 00 00 00 00
       ffffa00009061500: 05 fa fa fa fa fa fa fa 00 04 fa fa fa fa fa fa
      >ffffa00009061580: 00 03 fa fa fa fa fa fa 00 00 00 00 00 00 fa fa
                                                                   ^
       ffffa00009061600: fa fa fa fa 00 01 fa fa fa fa fa fa 01 fa fa fa
       ffffa00009061680: fa fa fa fa 00 01 fa fa fa fa fa fa 04 fa fa fa
      ==================================================================
      
      Digging into this indeed shows that the clock divider array is
      lacking a final fence, and that the clock subsystems goes in the
      weeds. Oh well.
      
      Let's add the empty structure that indicates the end of the array.
      
      Fixes: bd6f4854 ("net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs")
      Signed-off-by: default avatarMarc Zyngier <maz@kernel.org>
      Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
      Reviewed-by: default avatarMartin Blumenstingl <martin.blumenstingl@googlemail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f0212a5e
    • John Haxby's avatar
      ipv6: fix restrict IPV6_ADDRFORM operation · 82c9ae44
      John Haxby authored
      Commit b6f61189 ("ipv6: restrict IPV6_ADDRFORM operation") fixed a
      problem found by syzbot an unfortunate logic error meant that it
      also broke IPV6_ADDRFORM.
      
      Rearrange the checks so that the earlier test is just one of the series
      of checks made before moving the socket from IPv6 to IPv4.
      
      Fixes: b6f61189 ("ipv6: restrict IPV6_ADDRFORM operation")
      Signed-off-by: default avatarJohn Haxby <john.haxby@oracle.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      82c9ae44
    • Tang Bin's avatar
      net: systemport: Omit superfluous error message in bcm_sysport_probe() · bdbe05b3
      Tang Bin authored
      In the function bcm_sysport_probe(), when get irq failed, the function
      platform_get_irq() logs an error message, so remove redundant message
      here.
      Signed-off-by: default avatarTang Bin <tangbin@cmss.chinamobile.com>
      Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bdbe05b3
    • Tonghao Zhang's avatar
      net: openvswitch: ovs_ct_exit to be done under ovs_lock · 27de77ce
      Tonghao Zhang authored
      syzbot wrote:
      | =============================
      | WARNING: suspicious RCU usage
      | 5.7.0-rc1+ #45 Not tainted
      | -----------------------------
      | net/openvswitch/conntrack.c:1898 RCU-list traversed in non-reader section!!
      |
      | other info that might help us debug this:
      | rcu_scheduler_active = 2, debug_locks = 1
      | ...
      |
      | stack backtrace:
      | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
      | Workqueue: netns cleanup_net
      | Call Trace:
      | ...
      | ovs_ct_exit
      | ovs_exit_net
      | ops_exit_list.isra.7
      | cleanup_net
      | process_one_work
      | worker_thread
      
      To avoid that warning, invoke the ovs_ct_exit under ovs_lock and add
      lockdep_ovsl_is_held as optional lockdep expression.
      
      Link: https://lore.kernel.org/lkml/000000000000e642a905a0cbee6e@google.com
      Fixes: 11efd5cb ("openvswitch: Support conntrack zone limit")
      Cc: Pravin B Shelar <pshelar@ovn.org>
      Cc: Yi-Hung Wei <yihung.wei@gmail.com>
      Reported-by: syzbot+7ef50afd3a211f879112@syzkaller.appspotmail.com
      Signed-off-by: default avatarTonghao Zhang <xiangxia.m.yue@gmail.com>
      Acked-by: default avatarPravin B Shelar <pshelar@ovn.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      27de77ce
  5. 18 Apr, 2020 9 commits
    • Eric Dumazet's avatar
      tcp: cache line align MAX_TCP_HEADER · 9bacd256
      Eric Dumazet authored
      TCP stack is dumb in how it cooks its output packets.
      
      Depending on MAX_HEADER value, we might chose a bad ending point
      for the headers.
      
      If we align the end of TCP headers to cache line boundary, we
      make sure to always use the smallest number of cache lines,
      which always help.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Soheil Hassas Yeganeh <soheil@google.com>
      Acked-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9bacd256
    • David S. Miller's avatar
      Merge branch 'mptcp-fixes' · 56e639e6
      David S. Miller authored
      Florian Westphal says:
      
      ====================
      mptcp: fix 'attempt to release socket in state...' splats
      
      These two patches fix error handling corner-cases where
      inet_sock_destruct gets called for a mptcp_sk that is not in TCP_CLOSE
      state.  This results in unwanted error printks from the network stack.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      56e639e6
    • Florian Westphal's avatar
      mptcp: fix 'Attempt to release TCP socket in state' warnings · 9f5ca6a5
      Florian Westphal authored
      We need to set sk_state to CLOSED, else we will get following:
      
      IPv4: Attempt to release TCP socket in state 3 00000000b95f109e
      IPv4: Attempt to release TCP socket in state 10 00000000b95f109e
      
      First one is from inet_sock_destruct(), second one from
      mptcp_sk_clone failure handling.  Setting sk_state to CLOSED isn't
      enough, we also need to orphan sk so it has DEAD flag set.
      Otherwise, a very similar warning is printed from inet_sock_destruct().
      Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9f5ca6a5
    • Florian Westphal's avatar
      mptcp: fix splat when incoming connection is never accepted before exit/close · df1036da
      Florian Westphal authored
      Following snippet (replicated from syzkaller reproducer) generates
      warning: "IPv4: Attempt to release TCP socket in state 1".
      
      int main(void) {
       struct sockaddr_in sin1 = { .sin_family = 2, .sin_port = 0x4e20,
                                   .sin_addr.s_addr = 0x010000e0, };
       struct sockaddr_in sin2 = { .sin_family = 2,
      	                     .sin_addr.s_addr = 0x0100007f, };
       struct sockaddr_in sin3 = { .sin_family = 2, .sin_port = 0x4e20,
      	                     .sin_addr.s_addr = 0x0100007f, };
       int r0 = socket(0x2, 0x1, 0x106);
       int r1 = socket(0x2, 0x1, 0x106);
      
       bind(r1, (void *)&sin1, sizeof(sin1));
       connect(r1, (void *)&sin2, sizeof(sin2));
       listen(r1, 3);
       return connect(r0, (void *)&sin3, 0x4d);
      }
      
      Reason is that the newly generated mptcp socket is closed via the ulp
      release of the tcp listener socket when its accept backlog gets purged.
      
      To fix this, delay setting the ESTABLISHED state until after userspace
      calls accept and via mptcp specific destructor.
      
      Fixes: 58b09919 ("mptcp: create msk early")
      Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/9Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      df1036da
    • Eric Dumazet's avatar
      net/mlx4_en: avoid indirect call in TX completion · 310660a1
      Eric Dumazet authored
      Commit 9ecc2d86 ("net/mlx4_en: add xdp forwarding and data write support")
      brought another indirect call in fast path.
      
      Use INDIRECT_CALL_2() helper to avoid the cost of the indirect call
      when/if CONFIG_RETPOLINE=y
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Tariq Toukan <tariqt@mellanox.com>
      Cc: Willem de Bruijn <willemb@google.com>
      Reviewed-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      310660a1
    • Alexander Aring's avatar
      ipv6: rpl: fix full address compression · 62e69776
      Alexander Aring authored
      This patch makes it impossible that cmpri or cmpre values are set to the
      value 16 which is not possible, because these are 4 bit values. We
      currently run in an overflow when assigning the value 16 to it.
      
      According to the standard a value of 16 can be interpreted as a full
      elided address which isn't possible to set as compression value. A reason
      why this cannot be set is that the current ipv6 header destination address
      should never show up inside the segments of the rpl header. In this case we
      run in a overflow and the address will have no compression at all. Means
      cmpri or compre is set to 0.
      
      As we handle cmpri and cmpre sometimes as unsigned char or 4 bit value
      inside the rpl header the current behaviour ends in an invalid header
      format. This patch simple use the best compression method if we ever run
      into the case that the destination address is showed up inside the rpl
      segments. We avoid the overflow handling and the rpl header is still valid,
      even when we have the destination address inside the rpl segments.
      Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      62e69776
    • Julien Beraud's avatar
      net: stmmac: Fix sub-second increment · 91a2559c
      Julien Beraud authored
      In fine adjustement mode, which is the current default, the sub-second
          increment register is the number of nanoseconds that will be added to
          the clock when the accumulator overflows. At each clock cycle, the
          value of the addend register is added to the accumulator.
          Currently, we use 20ns = 1e09ns / 50MHz as this value whatever the
          frequency of the ptp clock actually is.
          The adjustment is then done on the addend register, only incrementing
          every X clock cycles X being the ratio between 50MHz and ptp_clock_rate
          (addend = 2^32 * 50MHz/ptp_clock_rate).
          This causes the following issues :
          - In case the frequency of the ptp clock is inferior or equal to 50MHz,
            the addend value calculation will overflow and the default
            addend value will be set to 0, causing the clock to not work at
            all. (For instance, for ptp_clock_rate = 50MHz, addend = 2^32).
          - The resolution of the timestamping clock is limited to 20ns while it
            is not needed, thus limiting the accuracy of the timestamping to
            20ns.
      
          Fix this by setting sub-second increment to 2e09ns / ptp_clock_rate.
          It will allow to reach the minimum possible frequency for
          ptp_clk_ref, which is 5MHz for GMII 1000Mps Full-Duplex by setting the
          sub-second-increment to a higher value. For instance, for 25MHz, it
          gives ssinc = 80ns and default_addend = 2^31.
          It will also allow to use a lower value for sub-second-increment, thus
          improving the timestamping accuracy with frequencies higher than
          100MHz, for instance, for 200MHz, ssinc = 10ns and default_addend =
          2^31.
      
      v1->v2:
       - Remove modifications to the calculation of default addend, which broke
       compatibility with clock frequencies for which 2000000000 / ptp_clk_freq
       is not an integer.
       - Modify description according to discussions.
      Signed-off-by: default avatarJulien Beraud <julien.beraud@orolia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      91a2559c
    • Julien Beraud's avatar
      net: stmmac: fix enabling socfpga's ptp_ref_clock · 15ce3060
      Julien Beraud authored
      There are 2 registers to write to enable a ptp ref clock coming from the
      fpga.
      One that enables the usage of the clock from the fpga for emac0 and emac1
      as a ptp ref clock, and the other to allow signals from the fpga to reach
      emac0 and emac1.
      Currently, if the dwmac-socfpga has phymode set to PHY_INTERFACE_MODE_MII,
      PHY_INTERFACE_MODE_GMII, or PHY_INTERFACE_MODE_SGMII, both registers will
      be written and the ptp ref clock will be set as coming from the fpga.
      Separate the 2 register writes to only enable signals from the fpga to
      reach emac0 or emac1 when ptp ref clock is not coming from the fpga.
      Signed-off-by: default avatarJulien Beraud <julien.beraud@orolia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      15ce3060
    • Xiyu Yang's avatar
      wimax/i2400m: Fix potential urb refcnt leak · 7717cbec
      Xiyu Yang authored
      i2400mu_bus_bm_wait_for_ack() invokes usb_get_urb(), which increases the
      refcount of the "notif_urb".
      
      When i2400mu_bus_bm_wait_for_ack() returns, local variable "notif_urb"
      becomes invalid, so the refcount should be decreased to keep refcount
      balanced.
      
      The issue happens in all paths of i2400mu_bus_bm_wait_for_ack(), which
      forget to decrease the refcnt increased by usb_get_urb(), causing a
      refcnt leak.
      
      Fix this issue by calling usb_put_urb() before the
      i2400mu_bus_bm_wait_for_ack() returns.
      Signed-off-by: default avatarXiyu Yang <xiyuyang19@fudan.edu.cn>
      Signed-off-by: default avatarXin Tan <tanxin.ctf@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7717cbec