Saeed Mahameed says:

====================
mlx5 fixes 2021-12-22

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
  net/mlx5e: Delete forward rule for ct or sample action
  net/mlx5e: Fix ICOSQ recovery flow for XSK
  net/mlx5e: Fix interoperability between XSK and ICOSQ recovery flow
  net/mlx5e: Fix skb memory leak when TC classifier action offloads are disabled
  net/mlx5e: Wrap the tx reporter dump callback to extract the sq
  net/mlx5: Fix tc max supported prio for nic mode
  net/mlx5: Fix SF health recovery flow
  net/mlx5: Fix error print in case of IRQ request failed
  net/mlx5: Use first online CPU instead of hard coded CPU
  net/mlx5: DR, Fix querying eswitch manager vport for ECPF
  net/mlx5: DR, Fix NULL vs IS_ERR checking in dr_domain_init_resources
====================

Link: https://lore.kernel.org/r/20211223190441.153012-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull drm fixes from Dave Airlie:
 "Happy Xmas. Nothing major, one mediatek and a couple of i915 locking
  fixes. There might be a few stragglers over next week or so but I
  don't expect much before next release.

  mediatek:
   - NULL pointer check

  i915:
   - guc submission locking fixes"

* tag 'drm-fixes-2021-12-24' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/guc: Only assign guc_id.id when stealing guc_id
  drm/i915/guc: Use correct context lock when callig clr_context_registered
  drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf

Pull io_uring fix from Jens Axboe:
 "Single fix for not clearing kiocb->ki_pos back to 0 for a stream,
  destined for stable as well"

* tag 'io_uring-5.16-2021-12-23' of git://git.kernel.dk/linux-block:
  io_uring: zero iocb->ki_pos for stream file types

Merge branch 'ucount-rlimit-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ucount fix from Eric Biederman:
 "This fixes a silly logic bug in the ucount rlimits code, where it was
  comparing against the wrong limit"

* 'ucount-rlimit-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Fix rlimit max values check

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - regressions:

   - revert "tipc: use consistent GFP flags"

  Previous releases - regressions:

   - igb: fix deadlock caused by taking RTNL in runtime resume path

   - accept UFOv6 packages in virtio_net_hdr_to_skb

   - netfilter: fix regression in looped (broad|multi)cast's MAC
     handling

   - bridge: fix ioctl old_deviceless bridge argument

   - ice: xsk: do not clear status_error0 for ntu + nb_buffs descriptor,
     avoid stalls when multiple sockets use an interface

  Previous releases - always broken:

   - inet: fully convert sk->sk_rx_dst to RCU rules

   - veth: ensure skb entering GRO are not cloned

   - sched: fix zone matching for invalid conntrack state

   - bonding: fix ad_actor_system option setting to default

   - nf_tables: fix use-after-free in nft_set_catchall_destroy()

   - lantiq_xrx200: increase buffer reservation to avoid mem corruption

   - ice: xsk: avoid leaking app buffers during clean up

   - tun: avoid double free in tun_free_netdev"

* tag 'net-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
  net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M
  r8152: sync ocp base
  r8152: fix the force speed doesn't work for RTL8156
  net: bridge: fix ioctl old_deviceless bridge argument
  net: stmmac: ptp: fix potentially overflowing expression
  net: dsa: tag_ocelot: use traffic class to map priority on injected header
  veth: ensure skb entering GRO are not cloned.
  asix: fix wrong return value in asix_check_host_enable()
  asix: fix uninit-value in asix_mdio_read()
  sfc: falcon: Check null pointer of rx_queue->page_ring
  sfc: Check null pointer of rx_queue->page_ring
  net: ks8851: Check for error irq
  drivers: net: smc911x: Check for error irq
  fjes: Check for error irq
  bonding: fix ad_actor_system option setting to default
  igb: fix deadlock caused by taking RTNL in RPM resume path
  gve: Correct order of processing device options
  net: skip virtio_net_hdr_set_proto if protocol already set
  net: accept UFOv6 packages in virtio_net_hdr_to_skb
  docs: networking: replace skb_hwtstamp_tx with skb_tstamp_tx
  ...

ETHER_CLK_SEL_FREQ_SEL_2P5M is not 0 bit of the register. This is a
value, which is 0. Fix from BIT(0) to 0.
Reported-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Fixes: b38dd98f ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://lore.kernel.org/r/20211223073633.101306-1-nobuhiro1.iwamatsu@toshiba.co.jpSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Hayes Wang says:

====================
r8152: fix bugs

Patch #1 fix the issue of force speed mode for RTL8156.
Patch #2 fix the issue of unexpected ocp_base.
====================

Link: https://lore.kernel.org/r/20211223092702.23841-386-nic_swsd@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There are some chances that the actual base of hardware is different
from the value recorded by driver, so we have to reset the variable
of ocp_base to sync it.

Set ocp_base to -1. Then, it would be updated and the new base would be
set to the hardware next time.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

It needs to set mdio force mode. Otherwise, link off always occurs when
setting force speed.

Fixes: 195aae32 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull sound fixes from Takashi Iwai:
 "Quite a few small fixes, hopefully the last batch for 5.16.

  Most of them are device-specific quirks and/or fixes, and nothing
  looks scary for the late stage"

* tag 'sound-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Fix quirk for Clevo NJ51CU
  ALSA: rawmidi - fix the uninitalized user_pversion
  ALSA: hda: intel-sdw-acpi: go through HDAS ACPI at max depth of 2
  ALSA: hda: intel-sdw-acpi: harden detection of controller
  ALSA: hda/hdmi: Disable silent stream on GLK
  ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
  ASoC: meson: aiu: Move AIU_I2S_MISC hold setting to aiu-fifo-i2s
  ASoC: meson: aiu: fifo: Add missing dma_coerce_mask_and_coherent()
  ASoC: tas2770: Fix setting of high sample rates
  ASoC: rt5682: fix the wrong jack type detected
  ALSA: hda/realtek: Add new alc285-hp-amp-init model
  ALSA: hda/realtek: Amp init fixup for HP ZBook 15 G6
  ASoC: tegra: Restore headphones jack name on Nyan Big
  ASoC: tegra: Add DAPM switches for headphones and mic jack
  ALSA: jack: Check the return value of kstrdup()
  ALSA: drivers: opl3: Fix incorrect use of vp->state
  ASoC: SOF: Intel: pci-tgl: add new ADL-P variant
  ASoC: SOF: Intel: pci-tgl: add ADL-N support

Commit 561d8352 ("bridge: use ndo_siocdevprivate") changed the
source and destination arguments of copy_{to,from}_user in bridge's
old_deviceless() from args[1] to uarg breaking SIOC{G,S}IFBR ioctls.

Commit cbd7ad29 ("net: bridge: fix ioctl old_deviceless bridge
argument") fixed only BRCTL_{ADD,DEL}_BRIDGES commands leaving
BRCTL_GET_BRIDGES one untouched.

The fixes BRCTL_GET_BRIDGES as well and has been tested with busybox's
brctl.

Example of broken brctl:
$ brctl show
bridge name     bridge id               STP enabled     interfaces
brctl: can't get bridge name for index 0: No such device or address

Example of fixed brctl:
$ brctl show
bridge name     bridge id               STP enabled     interfaces
br0             8000.000000000000       no

Fixes: 561d8352 ("bridge: use ndo_siocdevprivate")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/all/20211223153139.7661-2-repk@triplefau.lt/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Convert the u32 variable to type u64 in a context where expression of
type u64 is required to avoid potential overflow.

Fixes: e9e37200 ("net: stmmac: ptp: update tas basetime after ptp adjust")
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Link: https://lore.kernel.org/r/20211223073928.37371-1-xiaoliang.yang_1@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

For Ocelot switches, the CPU injected frames have an injection header
where it can specify the QoS class of the packet and the DSA tag, now it
uses the SKB priority to set that. If a traffic class to priority
mapping is configured on the netdevice (with mqprio for example ...), it
won't be considered for CPU injected headers. This patch make the QoS
class aligned to the priority to traffic class mapping if it exists.

Fixes: 8dce89aa ("net: dsa: ocelot: add tagger for Ocelot/Felix switches")
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Marouen Ghodhbane <marouen.ghodhbane@nxp.com>
Link: https://lore.kernel.org/r/20211223072211.33130-1-xiaoliang.yang_1@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull gpio fixes from Bartosz Golaszewski:

 - fix interrupts when replugging the device in gpio-dln2

 - remove the arbitrary timeout on virtio requests from gpio-virtio

* tag 'gpio-fixes-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: virtio: remove timeout
  gpio: dln2: Fix interrupts when replugging the device

After commit d3256efd ("veth: allow enabling NAPI even without XDP"),
if GRO is enabled on a veth device and TSO is disabled on the peer
device, TCP skbs will go through the NAPI callback. If there is no XDP
program attached, the veth code does not perform any share check, and
shared/cloned skbs could enter the GRO engine.

Ignat reported a BUG triggered later-on due to the above condition:

[   53.970529][    C1] kernel BUG at net/core/skbuff.c:3574!
[   53.981755][    C1] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[   53.982634][    C1] CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc5+ #25
[   53.982634][    C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[   53.982634][    C1] RIP: 0010:skb_shift+0x13ef/0x23b0
[   53.982634][    C1] Code: ea 03 0f b6 04 02 48 89 fa 83 e2 07 38 d0
7f 08 84 c0 0f 85 41 0c 00 00 41 80 7f 02 00 4d 8d b5 d0 00 00 00 0f
85 74 f5 ff ff <0f> 0b 4d 8d 77 20 be 04 00 00 00 4c 89 44 24 78 4c 89
f7 4c 89 8c
[   53.982634][    C1] RSP: 0018:ffff8881008f7008 EFLAGS: 00010246
[   53.982634][    C1] RAX: 0000000000000000 RBX: ffff8881180b4c80 RCX: 0000000000000000
[   53.982634][    C1] RDX: 0000000000000002 RSI: ffff8881180b4d3c RDI: ffff88810bc9cac2
[   53.982634][    C1] RBP: ffff8881008f70b8 R08: ffff8881180b4cf4 R09: ffff8881180b4cf0
[   53.982634][    C1] R10: ffffed1022999e5c R11: 0000000000000002 R12: 0000000000000590
[   53.982634][    C1] R13: ffff88810f940c80 R14: ffff88810f940d50 R15: ffff88810bc9cac0
[   53.982634][    C1] FS:  0000000000000000(0000) GS:ffff888235880000(0000) knlGS:0000000000000000
[   53.982634][    C1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   53.982634][    C1] CR2: 00007ff5f9b86680 CR3: 0000000108ce8004 CR4: 0000000000170ee0
[   53.982634][    C1] Call Trace:
[   53.982634][    C1]  <TASK>
[   53.982634][    C1]  tcp_sacktag_walk+0xaba/0x18e0
[   53.982634][    C1]  tcp_sacktag_write_queue+0xe7b/0x3460
[   53.982634][    C1]  tcp_ack+0x2666/0x54b0
[   53.982634][    C1]  tcp_rcv_established+0x4d9/0x20f0
[   53.982634][    C1]  tcp_v4_do_rcv+0x551/0x810
[   53.982634][    C1]  tcp_v4_rcv+0x22ed/0x2ed0
[   53.982634][    C1]  ip_protocol_deliver_rcu+0x96/0xaf0
[   53.982634][    C1]  ip_local_deliver_finish+0x1e0/0x2f0
[   53.982634][    C1]  ip_sublist_rcv_finish+0x211/0x440
[   53.982634][    C1]  ip_list_rcv_finish.constprop.0+0x424/0x660
[   53.982634][    C1]  ip_list_rcv+0x2c8/0x410
[   53.982634][    C1]  __netif_receive_skb_list_core+0x65c/0x910
[   53.982634][    C1]  netif_receive_skb_list_internal+0x5f9/0xcb0
[   53.982634][    C1]  napi_complete_done+0x188/0x6e0
[   53.982634][    C1]  gro_cell_poll+0x10c/0x1d0
[   53.982634][    C1]  __napi_poll+0xa1/0x530
[   53.982634][    C1]  net_rx_action+0x567/0x1270
[   53.982634][    C1]  __do_softirq+0x28a/0x9ba
[   53.982634][    C1]  run_ksoftirqd+0x32/0x60
[   53.982634][    C1]  smpboot_thread_fn+0x559/0x8c0
[   53.982634][    C1]  kthread+0x3b9/0x490
[   53.982634][    C1]  ret_from_fork+0x22/0x30
[   53.982634][    C1]  </TASK>

Address the issue by skipping the GRO stage for shared or cloned skbs.
To reduce the chance of OoO, try to unclone the skbs before giving up.

v1 -> v2:
 - use avoid skb_copy and fallback to netif_receive_skb  - Eric
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Fixes: d3256efd ("veth: allow enabling NAPI even without XDP")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/b5f61c5602aab01bac8d711d8d1bfab0a4817db7.1640197544.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Disable card detect during shutdown

  MMC host:
   - mmci: Fixup tuning support for stm32_sdmmc
   - meson-mx-sdhc: Fix support for multi-block SDIO commands
   - sdhci-tegra: Fix support for eMMC HS400ES mode"

* tag 'mmc-v5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mmci: stm32: clear DLYB_CR after sending tuning command
  mmc: meson-mx-sdhc: Set MANUAL_STOP for multi-block SDIO commands
  mmc: core: Disable card detect during shutdown
  mmc: sdhci-tegra: Fix switch to HS400ES mode

Pull ARM SoC fixes from Arnd Bergmann:
 "This is my last set of fixes for 5.16, including

   - multiple code fixes for the op-tee firmware driver

   - Two patches for allwinner SoCs, one fixing the phy mode on a board,
     the other one fixing a driver bug in the "RSB" bus driver. This was
     originally targeted for 5.17, but seemed worth moving to 5.16

   - Two small fixes for devicetree files on i.MX platforms, resolving
     problems with ethernet and i2c"

* tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  optee: Suppress false positive kmemleak report in optee_handle_rpc()
  tee: optee: Fix incorrect page free bug
  arm64: dts: lx2160a: fix scl-gpios property name
  tee: handle lookup of shm with reference count 0
  ARM: dts: imx6qdl-wandboard: Fix Ethernet support
  bus: sunxi-rsb: Fix shutdown
  arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode

All the error handling paths of 'mlx5e_tc_add_fdb_flow()' end to 'err_out'
where 'flow_flag_set(flow, FAILED);' is called.

All but the new error handling paths added by the commits given in the
Fixes tag below.

Fix these error handling paths and branch to 'err_out'.

Fixes: 166f431e ("net/mlx5e: Add indirect tc offload of ovs internal port")
Fixes: b16eb3c8 ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
(cherry picked from commit 31108d14)

When there is ct or sample action, the ct or sample rule will be deleted
and return. But if there is an extra mirror action, the forward rule can't
be deleted because of the return.

Fix it by removing the return.

Fixes: 69e2916e ("net/mlx5: CT: Add support for mirroring")
Fixes: f94d6389 ("net/mlx5e: TC, Add support to offload sample action")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

There are two ICOSQs per channel: one is needed for RX, and the other
for async operations (XSK TX, kTLS offload). Currently, the recovery
flow for both is the same, and async ICOSQ is mistakenly treated like
the regular ICOSQ.

This patch prevents running the regular ICOSQ recovery on async ICOSQ.
The purpose of async ICOSQ is to handle XSK wakeup requests and post
kTLS offload RX parameters, it has nothing to do with RQ and XSKRQ UMRs,
so the regular recovery sequence is not applicable here.

Fixes: be5323c8 ("net/mlx5e: Report and recover from CQE error on ICOSQ")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Both regular RQ and XSKRQ use the same ICOSQ for UMRs. When doing
recovery for the ICOSQ, don't forget to deactivate XSKRQ.

XSK can be opened and closed while channels are active, so a new mutex
prevents the ICOSQ recovery from running at the same time. The ICOSQ
recovery deactivates and reactivates XSKRQ, so any parallel change in
XSK state would break consistency. As the regular RQ is running, it's
not enough to just flush the recovery work, because it can be
rescheduled.

Fixes: be5323c8 ("net/mlx5e: Report and recover from CQE error on ICOSQ")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When TC classifier action offloads are disabled (CONFIG_MLX5_CLS_ACT in
Kconfig), the mlx5e_rep_tc_receive() function which is responsible for
passing the skb to the stack (or freeing it) is defined as a nop, and
results in leaking the skb memory. Replace the nop with a call to
napi_gro_receive() to resolve the leak.

Fixes: 28e7606f ("net/mlx5e: Refactor rx handler of represetor device")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Function mlx5e_tx_reporter_dump_sq() casts its void * argument to struct
mlx5e_txqsq *, but in TX-timeout-recovery flow the argument is actually
of type struct mlx5e_tx_timeout_ctx *.

 mlx5_core 0000:08:00.1 enp8s0f1: TX timeout detected
 mlx5_core 0000:08:00.1 enp8s0f1: TX timeout on queue: 1, SQ: 0x11ec, CQ: 0x146d, SQ Cons: 0x0 SQ Prod: 0x1, usecs since last trans: 21565000
 BUG: stack guard page was hit at 0000000093f1a2de (stack is 00000000b66ea0dc..000000004d932dae)
 kernel stack overflow (page fault): 0000 [#1] SMP NOPTI
 CPU: 5 PID: 95 Comm: kworker/u20:1 Tainted: G W OE 5.13.0_mlnx #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
 RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180
 [mlx5_core]
 Call Trace:
 mlx5e_tx_reporter_dump+0x43/0x1c0 [mlx5_core]
 devlink_health_do_dump.part.91+0x71/0xd0
 devlink_health_report+0x157/0x1b0
 mlx5e_reporter_tx_timeout+0xb9/0xf0 [mlx5_core]
 ? mlx5e_tx_reporter_err_cqe_recover+0x1d0/0x1d0
 [mlx5_core]
 ? mlx5e_health_queue_dump+0xd0/0xd0 [mlx5_core]
 ? update_load_avg+0x19b/0x550
 ? set_next_entity+0x72/0x80
 ? pick_next_task_fair+0x227/0x340
 ? finish_task_switch+0xa2/0x280
   mlx5e_tx_timeout_work+0x83/0xb0 [mlx5_core]
   process_one_work+0x1de/0x3a0
   worker_thread+0x2d/0x3c0
 ? process_one_work+0x3a0/0x3a0
   kthread+0x115/0x130
 ? kthread_park+0x90/0x90
   ret_from_fork+0x1f/0x30
 --[ end trace 51ccabea504edaff ]---
 RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180
 PKRU: 55555554
 Kernel panic - not syncing: Fatal exception
 Kernel Offset: disabled
 end Kernel panic - not syncing: Fatal exception

To fix this bug add a wrapper for mlx5e_tx_reporter_dump_sq() which
extracts the sq from struct mlx5e_tx_timeout_ctx and set it as the
TX-timeout-recovery flow dump callback.

Fixes: 5f29458b ("net/mlx5e: Support dump callback in TX reporter")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Only prio 1 is supported if firmware doesn't support ignore flow
level for nic mode. The offending commit removed the check wrongly.
Add it back.

Fixes: 9a99c8f1 ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

SF do not directly control the PCI device. During recovery flow SF
should not be allowed to do pci disable or pci reset, its PF will do it.

It fixes the following kernel trace:
mlx5_core.sf mlx5_core.sf.25: mlx5_health_try_recover:387:(pid 40948): starting health recovery flow
mlx5_core 0000:03:00.0: mlx5_pci_slot_reset was called
mlx5_core 0000:03:00.0: wait vital counter value 0xab175 after 1 iterations
mlx5_core.sf mlx5_core.sf.25: firmware version: 24.32.532
mlx5_core.sf mlx5_core.sf.23: mlx5_health_try_recover:387:(pid 40946): starting health recovery flow
mlx5_core 0000:03:00.0: mlx5_pci_slot_reset was called
mlx5_core 0000:03:00.0: wait vital counter value 0xab193 after 1 iterations
mlx5_core.sf mlx5_core.sf.23: firmware version: 24.32.532
mlx5_core.sf mlx5_core.sf.25: mlx5_cmd_check:813:(pid 40948): ENABLE_HCA(0x104) op_mod(0x0) failed,
status bad resource state(0x9), syndrome (0x658908)
mlx5_core.sf mlx5_core.sf.25: mlx5_function_setup:1292:(pid 40948): enable hca failed
mlx5_core.sf mlx5_core.sf.25: mlx5_health_try_recover:389:(pid 40948): health recovery failed

Fixes: 1958fc2f ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In case IRQ layer failed to find or to request irq, the driver is
printing the first cpu of the provided affinity as part of the error
print. Empty affinity is a valid input for the IRQ layer, and it is
an error to call cpumask_first() on empty affinity.

Remove the first cpu print from the error message.

Fixes: c36326d3 ("net/mlx5: Round-Robin EQs over IRQs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Hard coded CPU (0 in our case) might be offline. Hence, use the first
online CPU instead.

Fixes: f891b7cd ("net/mlx5: Enable single IRQ for PCI Function")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

On BlueField the E-Switch manager is the ECPF (vport 0xFFFE), but when
querying capabilities of ECPF eswitch manager, need to query vport 0
with other_vport = 0.

Fixes: 9091b821 ("net/mlx5: DR, Handle eswitch manager and uplink vports separately")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The mlx5_get_uars_page() function  returns error pointers.
Using IS_ERR() to check the return value to fix this.

Fixes: 4ec9e7b0 ("net/mlx5: DR, Expose steering domain functionality")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

io_uring supports using offset == -1 for using the current file position,
and we read that in as part of read/write command setup. For the non-iter
read/write types we pass in NULL for the position pointer, but for the
iter types we should not be passing any anything but 0 for the position
for a stream.

Clear kiocb->ki_pos if the file is a stream, don't leave it as -1. If we
do, then the request will error with -ESPIPE.

Fixes: ba04291e ("io_uring: allow use of offset == -1 to mean file position")
Link: https://github.com/axboe/liburing/discussions/501Reported-by: Samuel Williams <samuel.williams@oriontransfer.co.nz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'drm-intel-fixes-2021-12-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.16-rc7:
- Fix fallout from guc submission locking rework
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87wnjwydhs.fsf@intel.com

Merge tag 'mediatek-drm-fixes-5.16' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes

Mediatek DRM Fixes for Linux 5.16

1. Perform NULL pointer check for mtk_hdmi_conf.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1639956861-14873-1-git-send-email-chunkuang.hu@kernel.org

If asix_read_cmd() returns 0 on 30th interation, 0 will be returned from
asix_check_host_enable(), which is logically wrong. Fix it by returning
-ETIMEDOUT explicitly if we have exceeded 30 iterations

Also, replaced 30 with #define as suggested by Andrew

Fixes: a786e319 ("net: asix: fix uninit value bugs")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ecd3470ce6c2d5697ac635d0d3b14a47defb4acb.1640117288.git.paskripkin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

asix_read_cmd() may read less than sizeof(smsr) bytes and in this case
smsr will be uninitialized.

Fail log:
BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline]
BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497
BUG: KMSAN: uninit-value in asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497
 asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline]
 asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497
 asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497

Fixes: d9fe64e5 ("net: asix: Add in_pm parameter")
Reported-and-tested-by: syzbot+f44badb06036334e867a@syzkaller.appspotmail.com
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/8966e3b514edf39857dd93603fc79ec02e000a75.1640117288.git.paskripkin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Because of the possible failure of the kcalloc, it should be better to
set rx_queue->page_ptr_mask to 0 when it happens in order to maintain
the consistency.

Fixes: 5a6681e2 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20211220140344.978408-1-jiasheng@iscas.ac.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Because of the possible failure of the kcalloc, it should be better to
set rx_queue->page_ptr_mask to 0 when it happens in order to maintain
the consistency.

Fixes: 5a6681e2 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20211220135603.954944-1-jiasheng@iscas.ac.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull memblock fix from Mike Rapoport:
 "Fix memblock_phys_alloc() section mismatch error

  There are section mismatch errors when compiler refuses to inline
  one-line wrapper memblock_phys_alloc(). Make memblock_phys_alloc()
  __always_inline to avoid these mismatch issues"

* tag 'fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: fix memblock_phys_alloc() section mismatch error

The Clevo NJ51CU comes either with the ALC293 or the ALC256 codec, but uses
the 0x8686 subproduct id in both cases. The ALC256 codec needs a different
quirk for the headset microphone working and and edditional quirk for sound
working after suspend and resume.

When waking up from s3 suspend the Coef 0x10 is set to 0x0220 instead of
0x0020 on  the ALC256 codec. Setting the value manually makes the sound
work again. This patch does this automatically.

[ minor coding style fix by tiwai ]
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: b5acfe15 ("ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220)")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211215191646.844644-1-wse@tuxedocomputers.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The user_pversion was uninitialized for the user space file structure
in the open function, because the file private structure use
kmalloc for the allocation.

The kernel ALSA sequencer code clears the file structure, so no additional
fixes are required.

Cc: stable@kernel.org
Cc: broonie@kernel.org
BugLink: https://github.com/alsa-project/alsa-lib/issues/178
Fixes: 09d23174 ("ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION")
Reported-by: syzbot+88412ee8811832b00dbe@syzkaller.appspotmail.com
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20211218123925.2583847-1-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

In the HDAS ACPI scope, the SoundWire may not be the direct child of HDAS.
It needs to go through the ACPI table at max depth of 2 to find the
SoundWire device from HDAS.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211221010817.23636-3-yung-chuan.liao@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>