Cited patch in the fixes tag missed to free the allocated work.
Fix it by freeing the work after work execution.

Fixes: f3196bb0 ("net/mlx5: Introduce vhca state event notifier")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix vhca context size as defined by device interface specification.

Fixes: f3196bb0 ("net/mlx5: Introduce vhca state event notifier")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

do_div() returns reminder, while cited patch wanted to use
quotient.
Fix it by using quotient.

Fixes: 0e22bfb7 ("net/mlx5e: E-switch, Fix rate calculation for overflow")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

1. Don't set the ts_format bit to default when it reserved - device is
   running in the old mode (free running).
2. XRC doesn't have a CQ therefore the ts format in the QP
   context should be default / free running.
3. Set ts_format to WQ.

Fixes: 2fe8d4b8 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

QPs which don't care from timestamp mode, should set the ts_format
to default, otherwise the QP creation could be failed if the timestamp
mode is not supported.

Fixes: 2fe8d4b8 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Move priv memset from init to cleanup to avoid double priv cleanup
that can happen on profile change if also roolback fails.
Add missing cleanup flow in mlx5e_netdev_attach_profile().

Fixes: c4d7eb57 ("net/mxl5e: Add change profile method")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

VF tunnel TX traffic offload is adding flow which forward to flow
tables with lower level, which isn't support on all FW versions
and may cause firmware to fail with syndrome.

Fixed by enabling VF tunnel TX offload only if flow table capability
ignore_flow_level is enabled.

Fixes: 10742efc ("net/mlx5e: VF tunnel TX traffic offloading")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

flow_attr->ip_version has the matching that should be done inner/outer.
When working with chains, decapsulation is done on chain0 and next chain
match on outer header which is the original inner which could be ipv4.
So in tunnel route resolution we cannot use that to know which ip version
we are at so save tun_ip_version when parsing the tunnel match and use
that.

Fixes: a508728a ("net/mlx5e: VF tunnel RX traffic offloading")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix a bug of uninitialized pin index when trying to turn off PPS out.

Fixes: de19cd6c ("net/mlx5: Move some PPS logic into helper functions")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited change added offload support for Geneve options without verifying
the validity of the options masks, this caused offload of rules with match
on Geneve options with class,type and data masks which are zero to fail.

Fix by ignoring the match on Geneve options in case option masks are
all zero.

Fixes: 9272e3df ("net/mlx5e: Geneve, Add support for encap/decap flows offload")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Port timestamping for PTP can be enabled/disabled while the channels are
closed. In that case mlx5e_safe_switch_channels is skipped, and the
preactivate hook is called directly. However, if that hook returns an
error, the channel parameters must be reverted back to their old values.
This commit adds missing handling on this case.

Fixes: 145e5637 ("net/mlx5e: Add TX PTP port object support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Each RQ (including XSK RQs) takes a reference to the XDP program. When
an XDP program is attached or detached, the channels and queues are
recreated, however, there is a special flow for changing an active XDP
program to another one. In that flow, channels and queues stay alive,
but the refcounts of the old and new XDP programs are adjusted. This
flow didn't increment refcount by the number of active XSK RQs, and this
commit fixes it.

Fixes: db05815b ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When closing the PTP channel, set its pointer explicitly to NULL. PTP
channel is opened on demand, the code verify the pointer validity before
access. Nullify it when closing the PTP channel to avoid unexpected
behavior.

Fixes: 145e5637 ("net/mlx5e: Add TX PTP port object support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In addition to .get_ethtool_stats, add port PTP TX stats to
.ndo_get_stats64.

Fixes: 145e5637 ("net/mlx5e: Add TX PTP port object support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Since cited patch, MLX5E_REQUIRED_WQE_MTTS is not a power of two.
Hence, usage of MLX5E_LOG_ALIGNED_MPWQE_PPW should be replaced,
as it lost some accuracy. Use the designated macro to calculate
the number of required MTTs.

This makes sure the solution in cited patch works properly.

While here, un-inline mlx5e_get_mpwqe_offset(), and remove the
unused RQ parameter.

Fixes: c3c94023 ("net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTU")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The ICOSQ size should not go below MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE.
Enforce this where it's missing.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Pull networking fixes from David Miller:

 1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.

 2) TX skb error handling fix in mt76 driver, also from Felix.

 3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.

 4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
    From Cong Wang.

 5) Use correct printf format for dma_addr_t in ath11k, from Geert
    Uytterhoeven.

 6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
    Hsieh.

 7) Don't report truncated frames to mac80211 in mt76 driver, from
    Lorenzop Bianconi.

 8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.

 9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.

10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
    Arjun Roy.

11) Ignore routes with deleted nexthop object in mlxsw, from Ido
    Schimmel.

12) Need to undo tcp early demux lookup sometimes in nf_nat, from
    Florian Westphal.

13) Fix gro aggregation for udp encaps with zero csum, from Daniel
    Borkmann.

14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
    Donenfeld.

15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.

16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.

17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
    Oltean.

18) Make sure textsearch copntrol block is large enough, from Wilem de
    Bruijn.

19) Revert MAC changes to r8152 leading to instability, from Hates Wang.

20) Advance iov in 9p even for empty reads, from Jissheng Zhang.

21) Double hook unregister in nftables, from PabloNeira Ayuso.

22) Fix memleak in ixgbe, fropm Dinghao Liu.

23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.

24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
    Tang.

25) Fix DOI refcount bugs in cipso, from Paul Moore.

26) One too many irqsave in ibmvnic, from Junlin Yang.

27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
    Balazs Nemeth.

* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
  s390/qeth: fix notification for pending buffers during teardown
  s390/qeth: schedule TX NAPI on QAOB completion
  s390/qeth: improve completion of pending TX buffers
  s390/qeth: fix memory leak after failed TX Buffer allocation
  net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
  net: check if protocol extracted by virtio_net_hdr_set_proto is correct
  net: dsa: xrs700x: check if partner is same as port in hsr join
  net: lapbether: Remove netif_start_queue / netif_stop_queue
  atm: idt77252: fix null-ptr-dereference
  atm: uPD98402: fix incorrect allocation
  atm: fix a typo in the struct description
  net: qrtr: fix error return code of qrtr_sendmsg()
  mptcp: fix length of ADD_ADDR with port sub-option
  net: bonding: fix error return code of bond_neigh_init()
  net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
  net: enetc: set MAC RX FIFO to recommended value
  net: davicom: Use platform_get_irq_optional()
  net: davicom: Fix regulator not turned off on driver removal
  net: davicom: Fix regulator not turned off on failed probe
  net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
  ...

Pull sparc fixes from David Miller:
 "Fix opcode filtering for exceptions, and clean up defconfig"

* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
  sparc: sparc64_defconfig: remove duplicate CONFIGs
  sparc64: Fix opcode filtering in handling of no fault loads

After my patch there is CONFIG_ATA defined twice.
Remove the duplicate one.
Same problem for CONFIG_HAPPYMEAL, except I added as builtin for boot
test with NFS.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: a57cdeb3 ("sparc: sparc64_defconfig: add necessary configs for qemu")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

is_no_fault_exception() has two bugs which were discovered via random
opcode testing with stress-ng. Both are caused by improper filtering
of opcodes.

The first bug can be triggered by a floating point store with a no-fault
ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode C1A01040.

The code first tests op3[5] (0x1000000), which denotes a floating
point instruction, and then tests op3[2] (0x200000), which denotes a
store instruction. But these bits are not mutually exclusive, and the
above mentioned opcode has both bits set. The intent is to filter out
stores, so the test for stores must be done first in order to have
any effect.

The second bug can be triggered by a floating point load with one of
the invalid ASI values 0x8e or 0x8f, which pass this check in
is_no_fault_exception():
     if ((asi & 0xf2) == ASI_PNF)

An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38",
opcode CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal
in handle_ldf_stq(), and is_no_fault_exception() must not allow these
invalid asi values to make it that far.

In both of these cases, handle_ldf_stq() reacts by calling
sun4v_data_access_exception() or spitfire_data_access_exception(),
which call is_no_fault_exception() and results in an infinite
recursion.
Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/qeth: fixes 2021-03-09

please apply the following patch series to netdev's net tree.

This brings one fix for a memleak in an error path of the setup code.
Also several fixes for dealing with pending TX buffers - two for old
bugs in their completion handling, and one recent regression in a
teardown path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The cited commit reworked the state machine for pending TX buffers.
In qeth_iqd_tx_complete() it turned PENDING into a transient state, and
uses NEED_QAOB for buffers that get parked while waiting for their QAOB
completion.

But it missed to adjust the check in qeth_tx_complete_buf(). So if
qeth_tx_complete_pending_bufs() is called during teardown to drain
the parked TX buffers, we no longer raise a notification for af_iucv.

Instead of updating the checked state, just move this code into
qeth_tx_complete_pending_bufs() itself. This also gets rid of the
special-case in the common TX completion path.

Fixes: 8908f36d ("s390/qeth: fix af_iucv notification race")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a QAOB notifies us that a pending TX buffer has been delivered, the
actual TX completion processing by qeth_tx_complete_pending_bufs()
is done within the context of a TX NAPI instance. We shouldn't rely on
this instance being scheduled by some other TX event, but just do it
ourselves.

qeth_qdio_handle_aob() is called from qeth_poll(), ie. our main NAPI
instance. To avoid touching the TX queue's NAPI instance
before/after it is (un-)registered, reorder the code in qeth_open()
and qeth_stop() accordingly.

Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current design attaches a pending TX buffer to a custom
single-linked list, which is anchored at the buffer's slot on the
TX ring. The buffer is then checked for final completion whenever
this slot is processed during a subsequent TX NAPI poll cycle.

But if there's insufficient traffic on the ring, we might never make
enough progress to get back to this ring slot and discover the pending
buffer's final TX completion. In particular if this missing TX
completion blocks the application from sending further traffic.

So convert the custom single-linked list code to a per-queue list_head,
and scan this list on every TX NAPI cycle.

Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When qeth_alloc_qdio_queues() fails to allocate one of the buffers that
back an Output Queue, the 'out_freeoutqbufs' path will free all
previously allocated buffers for this queue. But it misses to free the
half-finished queue struct itself.

Move the buffer allocation into qeth_alloc_output_queue(), and deal with
such errors internally.

Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Balazs Nemeth says:

====================
net: prevent infinite loop caused by incorrect proto from virtio_net_hdr_set_proto

These patches prevent an infinite loop for gso packets with a protocol
from virtio net hdr that doesn't match the protocol in the packet.
Note that packets coming from a device without
header_ops->parse_protocol being implemented will not be caught by
the check in virtio_net_hdr_to_skb, but the infinite loop will still
be prevented by the check in the gso layer.

Changes from v2 to v3:
  - Remove unused *eth.
  - Use MPLS_HLEN to also check if the MPLS header length is a multiple
    of four.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A packet with skb_inner_network_header(skb) == skb_network_header(skb)
and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers
from the packet. Subsequently, the call to skb_mac_gso_segment will
again call mpls_gso_segment with the same packet leading to an infinite
loop. In addition, ensure that the header length is a multiple of four,
which should hold irrespective of the number of stacked labels.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't
set) based on the type in the virtio net hdr, but the skb could contain
anything since it could come from packet_snd through a raw socket. If
there is a mismatch between what virtio_net_hdr_set_proto sets and
the actual protocol, then the skb could be handled incorrectly later
on.

An example where this poses an issue is with the subsequent call to
skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set
correctly. A specially crafted packet could fool
skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned.

Avoid blindly trusting the information provided by the virtio net header
by checking that the protocol in the packet actually matches the
protocol set by virtio_net_hdr_set_proto. Note that since the protocol
is only checked if skb->dev implements header_ops->parse_protocol,
packets from devices without the implementation are not checked at this
stage.

Fixes: 9274124f ("net: stricter validation of untrusted gso packets")
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't assign dp to partner if it's the same port that xrs700x_hsr_join
was called with. The partner port is supposed to be the other port in
the HSR/PRP redundant pair not the same port. This fixes an issue
observed in testing where forwarding between redundant HSR ports on this
switch didn't work depending on the order the ports were added to the
hsr device.

Fixes: bd62e6f5 ("net: dsa: xrs700x: add HSR offloading support")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull gpio fixes from Bartosz Golaszewski:
 "A bunch of fixes for the GPIO subsystem. We have two regressions in
  the core code spotted right after the merge window, a series of fixes
  for ACPI GPIO and a subsequent fix for a related regression in
  gpio-pca953x + a minor tweak in .gitignore and a rework of handling of
  the gpio-line-names to remedy a regression in stm32mp151.

  Summary:

   - fix two regressions in core GPIO subsystem code: one NULL-pointer
     dereference and one list corruption

   - read GPIO line names from fwnode instead of using the generic
     device properties to fix a regression on stm32mp151

   - fixes to ACPI GPIO and gpio-pca953x to handle a regression in IRQ
     handling on Intel Galileo

   - update .gitignore in GPIO selftests"

* tag 'gpio-fixes-for-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: Read "gpio-line-names" from a firmware node
  gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2
  gpiolib: acpi: Allow to find GpioInt() resource by name and index
  gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk
  gpiolib: acpi: Add missing IRQF_ONESHOT
  gpio: fix gpio-device list corruption
  gpio: fix NULL-deref-on-deregistration regression
  selftests: gpio: update .gitignore

Pull MIPS fixes from Thomas Bogendoerfer:

 - fixes for boot breakage because of misaligned FDTs

 - fix for overwritten exception handlers

 - enable MIPS optimized crypto for all MIPS CPUs to improve wireguard
   performance

* tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: kernel: Reserve exception base early to prevent corruption
  MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes
  crypto: mips/poly1305 - enable for all MIPS processors
  MIPS: boot/compressed: Copy DTB to aligned address

For the devices in this driver, the default qdisc is "noqueue",
because their "tx_queue_len" is 0.

In function "__dev_queue_xmit" in "net/core/dev.c", devices with the
"noqueue" qdisc are specially handled. Packets are transmitted without
being queued after a "dev->flags & IFF_UP" check. However, it's possible
that even if this check succeeds, "ops->ndo_stop" may still have already
been called. This is because in "__dev_close_many", "ops->ndo_stop" is
called before clearing the "IFF_UP" flag.

If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in
"__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it
checks "netif_xmit_stopped" and finds that the queue is already stopped.
In this case, it will complain that:
"Virtual device ... asks to queue packet!"

To prevent "__dev_queue_xmit" from generating this complaint, we should
not call "netif_stop_queue" in "ops->ndo_stop".

We also don't need to call "netif_start_queue" in "ops->ndo_open",
because after a netdev is allocated and registered, the
"__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need
to call "netif_start_queue" to clear it.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

BMIPS is one of the few platforms that do change the exception base.
After commit 2dcb3964 ("memblock: do not start bottom-up allocations
with kernel_end") we started seeing BMIPS boards fail to boot with the
built-in FDT being corrupted.

Before the cited commit, early allocations would be in the [kernel_end,
RAM_END] range, but after commit they would be within [RAM_START +
PAGE_SIZE, RAM_END].

The custom exception base handler that is installed by
bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the
memory region allocated by unflatten_and_copy_device_tree() thus
corrupting the FDT used by the kernel.

To fix this, we need to perform an early reservation of the custom
exception space. Additional we reserve the first 4k (1k for R3k) for
either normal exception vector space (legacy CPUs) or special vectors
like cache exceptions.

Huge thanks to Serge for analysing and proposing a solution to this
issue.

Fixes: 2dcb3964 ("memblock: do not start bottom-up allocations with kernel_end")
Reported-by: Kamal Dasu <kdasu.kdev@gmail.com>
Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Pull sparc updates from David Miller:
 "Just some more random bits from Al, including a conversion over to
  generic extables"

* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
  sparc32: take ->thread.flags out
  sparc32: get rid of fake_swapper_regs
  sparc64: get rid of fake_swapper_regs
  sparc32: switch to generic extables
  sparc32: switch copy_user.S away from range exception table entries
  sparc32: get rid of range exception table entries in checksum_32.S
  sparc32: switch __bzero() away from range exception table entries
  sparc32: kill lookup_fault()
  sparc32: don't bother with lookup_fault() in __bzero()

this one is similar to the phy_data allocation fix in uPD98402, the
driver allocate the idt77105_priv and store to dev_data but later
dereference using dev->dev_data, which will cause null-ptr-dereference.

fix this issue by changing dev_data to phy_data so that PRIV(dev) can
work correctly.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this
dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock
(i.e dev->phy_data->lock) will result in a null-ptr-dereference.

I believe this is a typo and what it actually want to do is to allocate
phy_data instead of dev_data.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy_data means private PHY data not date
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When sock_alloc_send_skb() returns NULL to skb, no error return code of
qrtr_sendmsg() is assigned.
To fix this bug, rc is assigned with -ENOMEM in this case.

Fixes: 194ccc88 ("net: qrtr: Support decoding incoming v2 packets")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

in current Linux, MPTCP peers advertising endpoints with port numbers use
a sub-option length that wrongly accounts for the trailing TCP NOP. Also,
receivers will only process incoming ADD_ADDR with port having such wrong
sub-option length. Fix this, making ADD_ADDR compliant to RFC8684 §3.4.1.

this can be verified running tcpdump on the kselftests artifacts:

 unpatched kernel:
 [root@bottarga mptcp]# tcpdump -tnnr unpatched.pcap | grep add-addr
 reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535
 IP 10.0.1.1.10000 > 10.0.1.2.53078: Flags [.], ack 101, win 509, options [nop,nop,TS val 214459678 ecr 521312851,mptcp add-addr v1 id 1 a00:201:2774:2d88:7436:85c3:17fd:101], length 0
 IP 10.0.1.2.53078 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 521312852 ecr 214459678,mptcp add-addr[bad opt]]

 patched kernel:
 [root@bottarga mptcp]# tcpdump -tnnr patched.pcap | grep add-addr
 reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535
 IP 10.0.1.1.10000 > 10.0.1.2.38178: Flags [.], ack 101, win 509, options [nop,nop,TS val 3728873902 ecr 2732713192,mptcp add-addr v1 id 1 10.0.2.1:10100 hmac 0xbccdfcbe59292a1f,nop,nop], length 0
 IP 10.0.1.2.38178 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 2732713195 ecr 3728873902,mptcp add-addr v1-echo id 1 10.0.2.1:10100,nop,nop], length 0

Fixes: 22fb85ff ("mptcp: add port support for ADD_ADDR suboption writing")
CC: stable@vger.kernel.org # 5.11+
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When slave is NULL or slave_ops->ndo_neigh_setup is NULL, no error
return code of bond_neigh_init() is assigned.
To fix this bug, ret is assigned with -EINVAL in these cases.

Fixes: 9e99bfef ("bonding: fix bond_neigh_init()")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>