- 21 Sep, 2015 18 commits
-
-
Marc Kleine-Budde authored
This patch defers the writing of the interrupts bits of the CTRL register order to enables all interrupts atomically at the the of the flexcan_chip_start() function. Suggested-by:
Torsten Lang <torsten.lang@uweschneider.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
This patch gives the member of flexcan_priv holding mailboxes a sensible name, by renaming from "cantxfg" to "mb": struct flexcan_priv::cantxfg -> struct flexcan_priv::mb Signed-off-by: -
Marc Kleine-Budde authored
This patch renames the pointer to the mmio address space from "base" to "regs" and changes the type from "void __iomem *" to "struct flexcan_regs __iomem *". Signed-off-by: -
Marc Kleine-Budde authored
This patch renames the "features" member of struct flexcan_devtype_data to "quirks". The corresponding defines are renamed too, to reflect what they actually do. FLEXCAN_HAS_V10_FEATURES -> FLEXCAN_QUIRK_DISABLE_RXFG FLEXCAN_HAS_BROKEN_ERR_STATE -> FLEXCAN_QUIRK_BROKEN_ERR_STATE FLEXCAN_HAS_MECR_FEATURES -> FLEXCAN_QUIRK_DISABLE_MECR Signed-off-by: -
Marc Kleine-Budde authored
This patch changes the order the individual bits of the mcr register in flexcan_chip_start() are or'ed together to match the datasheet. The inline documentation is adjusted accordingly. Signed-off-by: -
Marc Kleine-Budde authored
This patch removes unused header files from the flexcan driver. Signed-off-by: -
Marc Kleine-Budde authored
This patch adds the missing #include-s to the dev.h and led.h, so that they can be used without including further header files. Signed-off-by: -
Marc Kleine-Budde authored
This patch fixes up the coding style to make checkpatch happier. Some typos are also fixed. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-09-17 This series contains updates to i40e and i40evf. Shannon provides updates to i40e and i40evf to resolve an issue with the nvmupdate utility. First renames a variable name to reduce confusion and to differentiate it from the actual user variable. Then added the ability to save the admin queue write back descriptor if a caller supplies a buffer for it to be saved into. Added a new GetStatus command so that the NVM update tool can query the current status instead of doing fake write requests to probe for readiness. Added wait states to the NVM update state machine to signify when waiting for an update operation to finish, whether we are in the middle of a set of write operations, or we are now idle but waiting. Then added a facility to run admin queue commands through the NVM update utility in order to allow the update tools to interact with the firmware and do special commands needed for updates and configuration changes. Also added a facility to recover the result of a previously run admin queue command. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.4-20150917' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2015-09-17 this is a pull request of two patches for net-next/master. Gerhard Bertelsmann adds support for the CAN controller found on the Allwinner A10/A20 SoC. ==================== Signed-off-by:
-
Ksenija Stanojevic authored
Replace time_t type and get_seconds function which are not y2038 safe on 32-bit systems. Function ktime_get_seconds use monotonic instead of real time and therefore will not cause overflow. Signed-off-by:
Ksenija Stanojevic <ksenija.stanojevic@gmail.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
huangdaode says: ==================== net: Hisilicon Network Subsystem support This is V2 of Hisilicon Network Subsystem(HNS) patchesets taking care about LKML comments. Please find out the changes from the change logs. This patchset is rebased on mainline kernel Linux 4.3-rc1 branch. [PATCH v2 1/5] Device Tree Binding Documentation [PATCH v2 2/5] Merge MDIO Module [PATCH v2 3/5] Hisilicon Network Acceleration Engine Framework [PATCH v2 4/5] Distributed System Area Fabric Module [PATCH v2 5/5] Basic Ethernet Driver Module Changes from V1: 1. Remove "inline" in C file (according to LKML comment, same in below). 2. Fix a bug about class_find_device. 3. Change the DTS pattern on hnae, restruct it to compatible with Hi1610 soc. 4. Unified hip04_mdio and hip05_mdio into hns_mdio, which is more usaul for later SOCs. V1 Patches Reference: https://lkml.org/lkml/2015/8/14/165 ==================== Signed-off-by:
-
huangdaode authored
This is to add basic ethernet support for HNS. It is one of the way to use the HNS acceleration engine. But most of the decoding/encoding capability of the AE cannot be used in this way. This submit contains the basic feature as a ethernet driver. More will be added later. Signed-off-by:
huangdaode <huangdaode@hisilicon.com> Signed-off-by:
Kenneth Lee <liguozhu@huawei.com> Signed-off-by:
Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by:
-
huangdaode authored
DSAF, namely Distributed System Area Fabric, is one of the HNS acceleration engine implementation. This patch add DSAF driver to the system. hns_ae_adapt: the adaptor for registering the driver to HNAE framework hns_dsaf_mac: MAC cover interface for GE and XGE hns_dsaf_gmac: GE (10/100/1000G Ethernet) MAC function hns_dsaf_xgmac: XGE (10000+G Ethernet) MAC function hns_dsaf_main: the platform device driver for the whole hardware hns_dsaf_misc: some misc helper function, such as LED support hns_dsaf_ppe: packet process engine function hns_dsaf_rcb: ring buffer function Signed-off-by:
-
huangdaode authored
HNAE (Hisilicon Network Acceleration Engine) is a framework to provide a unified ring buffer interface for Hisilicon Network Acceleration Engines. With the interface, upper layer can work as ethernet driver, ODP driver or other service driver on purpose. Signed-off-by:
-
huangdaode authored
The MDIO support for Hisilicon Network Subsystem. It is used in Hislicon hip04, hip05 and Hi1610 SoC to control the external PHY Signed-off-by:
-
huangdaode authored
The Hisilicon Network Subsystem is a long term evolution IP which is supposed to be used in Hisilicon ICT SoC. The IP, which is called hns for short, is a TCP/IP acceleration engine, which can directly decode TCP/IP stream and distribute them to different ring buffers. HNS can be configured to work on different mode for different scenario. This patch make use only some of the mode to make it as standard ethernet NIC. The other mode will be added soon. The whole function has 4 kernel sub-modules: hnae: the HNS acceleration engine framework. It provides a abstract interface between the engine and the upper layers which make use of the engine by ring buffer. hns_enet_drv: a standard ethernet driver that base on the ring buffer. hns_dsaf: one of the implementation of HNS acceleration engine, which is applied on Hililicon hip05, Hi1610 and other later-on SoCs hns_mdio: the mdio control to the PHY, used by acceleration engine This submit add basic config and documents Signed-off-by:
-
chas williams authored
If netfront connects with two (or more) queues and then reconnects with only one queue it fails to delete or rewrite the multi-queue-num-queues key and netback will try to use the wrong number of queues. Always write the num-queues field if the backend has multi-queue support. Signed-off-by:
Chas Williams <3chas3@gmail.com> Signed-off-by:
-
- 18 Sep, 2015 22 commits
-
-
Eric Dumazet authored
Memory placement in sch_dsmark is silly : Better place mask/value in the same cache line. Also, we can embed small arrays in the first cache line and remove a potential cache miss. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: bcmgenet: Interrupt coalescing This patch series adds support for interrupt coalescing for GENET adapters. ==================== Signed-off-by: -
Florian Fainelli authored
Add support for the ethtool rx-frames coalescing parameter which allows defining the number of RX interrupts per frames received. The RDMA engine supports a configurable timeout with a resolution of approximately 8.192 us. We can no longer enable the BDONE/PDONE interrupts as those would fire for each packet/buffer received, which would defeat the MBDONE interrupt purpose. The MBDONE interrupt is guaranteed to correspond to a PDONE/BDONE interrupt when the threshold is set to 1. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Configuring the ethtool tx-frames property, which translates into N packets before a TX interrupt is the simplest configuration scheme because it requires no locking neither at the softare nor hardware level, and is completely indepedent from the link speed. Since ethtool does not allow per-tx queue coalescing parameters, we apply the same setting to any transmit queue. We can no longer enable the BDONE/PDONE interrupts as those would fire for each packet/buffer received, which would defeat the MBDONE interrupt purpose. The MBDONE interrupt is guaranteed to correspond to a PDONE/BDONE interrupt when the threshold is set to 1, but offers interrupt coalescing when the value is > 1. Since the HW is configured to generate an interrupt when the ring becomes emtpy, we have to deny any timeout/timer settings coming from user-space to indicate we can only generate an interrupt very <N> packets. While we are at it, fix the DMA_INTR_THRESHOLD_MASK value which was off by one bit (0xff vs. 0x1ff). Signed-off-by:
-
Woojung.Huh@microchip.com authored
Remove not defined MAC_CR_GMII_EN_ bit from MAC_CR. Signed-off-by:
Woojung Huh <woojung.huh@microchip.com> Signed-off-by:
-
Woojung.Huh@microchip.com authored
Create lan78xx_get_mdix_status() and lan78xx_set_mdix_status() for MDIX control. Signed-off-by:
-
Woojung.Huh@microchip.com authored
Remove phy defines in lan78xx.h and use defines in include/linux/microchipphy.h. Signed-off-by:
-
Woojung.Huh@microchip.com authored
Update to use phylib instead of mii_if_info. Signed-off-by:
-
Woojung.Huh@microchip.com authored
Add PHYLIB and MICROCHIP_PHY as default configuration for lan78xx. Signed-off-by:
-
Woojung.Huh@microchip.com authored
Check device ready bit (PMT_CTL_READY_) after reset the PHY. Device may not be ready even if PHY_RST_ is cleared depends on configuration. Signed-off-by:
-
David Ahern authored
Sergey, Richard and Fabio reported an oops in ip_route_input_noref. e.g., from Richard: [ 0.877040] BUG: unable to handle kernel NULL pointer dereference at 0000000000000056 [ 0.877597] IP: [<ffffffff8155b5e2>] ip_route_input_noref+0x1a2/0xb00 [ 0.877597] PGD 3fa14067 PUD 3fa6e067 PMD 0 [ 0.877597] Oops: 0000 [#1] SMP [ 0.877597] Modules linked in: virtio_net virtio_pci virtio_ring virtio [ 0.877597] CPU: 1 PID: 119 Comm: ifconfig Not tainted 4.2.0+ #1 [ 0.877597] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.877597] task: ffff88003fab0bc0 ti: ffff88003faa8000 task.ti: ffff88003faa8000 [ 0.877597] RIP: 0010:[<ffffffff8155b5e2>] [<ffffffff8155b5e2>] ip_route_input_noref+0x1a2/0xb00 [ 0.877597] RSP: 0018:ffff88003ed03ba0 EFLAGS: 00010202 [ 0.877597] RAX: 0000000000000046 RBX: 00000000ffffff8f RCX: 0000000000000020 [ 0.877597] RDX: ffff88003fab50b8 RSI: 0000000000000200 RDI: ffffffff8152b4b8 [ 0.877597] RBP: ffff88003ed03c50 R08: 0000000000000000 R09: 0000000000000000 [ 0.877597] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88003fab6f00 [ 0.877597] R13: ffff88003fab5000 R14: 0000000000000000 R15: ffffffff81cb5600 [ 0.877597] FS: 00007f6de5751700(0000) GS:ffff88003ed00000(0000) knlGS:0000000000000000 [ 0.877597] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.877597] CR2: 0000000000000056 CR3: 000000003fa6d000 CR4: 00000000000006e0 [ 0.877597] Stack: [ 0.877597] 0000000000000000 0000000000000046 ffff88003fffa600 ffff88003ed03be0 [ 0.877597] ffff88003f9e2c00 697da8c0017da8c0 ffff880000000000 000000000007fd00 [ 0.877597] 0000000000000000 0000000000000046 0000000000000000 0000000400000000 [ 0.877597] Call Trace: [ 0.877597] <IRQ> [ 0.877597] [<ffffffff812bfa1f>] ? cpumask_next_and+0x2f/0x40 [ 0.877597] [<ffffffff8158e13c>] arp_process+0x39c/0x690 [ 0.877597] [<ffffffff8158e57e>] arp_rcv+0x13e/0x170 [ 0.877597] [<ffffffff8151feec>] __netif_receive_skb_core+0x60c/0xa00 [ 0.877597] [<ffffffff81515795>] ? __build_skb+0x25/0x100 [ 0.877597] [<ffffffff81515795>] ? __build_skb+0x25/0x100 [ 0.877597] [<ffffffff81521ff6>] __netif_receive_skb+0x16/0x70 [ 0.877597] [<ffffffff81522078>] netif_receive_skb_internal+0x28/0x90 [ 0.877597] [<ffffffff8152288f>] napi_gro_receive+0x7f/0xd0 [ 0.877597] [<ffffffffa0017906>] virtnet_receive+0x256/0x910 [virtio_net] [ 0.877597] [<ffffffffa0017fd8>] virtnet_poll+0x18/0x80 [virtio_net] [ 0.877597] [<ffffffff815234cd>] net_rx_action+0x1dd/0x2f0 [ 0.877597] [<ffffffff81053228>] __do_softirq+0x98/0x260 [ 0.877597] [<ffffffff8164969c>] do_softirq_own_stack+0x1c/0x30 The root cause is use of res.table uninitialized. Thanks to Nikolay for noticing the uninitialized use amongst the maze of gotos. As Nikolay pointed out the second initialization is not required to fix the oops, but rather to fix a related problem where a valid lookup should be invalidated before creating the rth entry. Fixes: b7503e0c ("net: Add FIB table id to rtable") Reported-by:
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Reported-by:
Richard Alpe <richard.alpe@ericsson.com> Reported-by:
Fabio Estevam <festevam@gmail.com> Tested-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== bpf: performance improvements v1->v2: dropped redundant iff_up check in patch 2 At plumbers we discussed different options on how to get rid of skb_clone from bpf_clone_redirect(), the patch 2 implements the best option. Patch 1 adds 'integrated exts' to cls_bpf to improve performance by combining simple actions into bpf classifier. ==================== Signed-off-by: -
Alexei Starovoitov authored
Existing bpf_clone_redirect() helper clones skb before redirecting it to RX or TX of destination netdev. Introduce bpf_redirect() helper that does that without cloning. Benchmarked with two hosts using 10G ixgbe NICs. One host is doing line rate pktgen. Another host is configured as: $ tc qdisc add dev $dev ingress $ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \ action bpf run object-file tcbpf1_kern.o section clone_redirect_xmit drop so it receives the packet on $dev and immediately xmits it on $dev + 1 The section 'clone_redirect_xmit' in tcbpf1_kern.o file has the program that does bpf_clone_redirect() and performance is 2.0 Mpps $ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \ action bpf run object-file tcbpf1_kern.o section redirect_xmit drop which is using bpf_redirect() - 2.4 Mpps and using cls_bpf with integrated actions as: $ tc filter add dev $dev root pref 10 \ bpf run object-file tcbpf1_kern.o section redirect_xmit integ_act classid 1 performance is 2.5 Mpps To summarize: u32+act_bpf using clone_redirect - 2.0 Mpps u32+act_bpf using redirect - 2.4 Mpps cls_bpf using redirect - 2.5 Mpps For comparison linux bridge in this setup is doing 2.1 Mpps and ixgbe rx + drop in ip_rcv - 7.8 Mpps Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
Daniel Borkmann authored
Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: -
Junwei Zhang authored
The permanent protocol nodes are at the head of the list, So only need check all these nodes. No matter the new node is permanent or not, insert the new node after the last permanent protocol node, If the new node conflicts with existing permanent node, return error. Signed-off-by:
Martin Zhang <martinbj2008@gmail.com> Signed-off-by:
-
Eric Dumazet authored
If skb carries a l4 hash, no need to perform a flow dissection. Performance is slightly better : lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100 2.39012e+06 lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100 2.39393e+06 lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100 2.39988e+06 After patch : lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100 2.43579e+06 lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100 2.44304e+06 lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100 2.44312e+06 Signed-off-by:
-
Eric Dumazet authored
In commit b73c3d0e ("net: Save TX flow hash in sock and set in skbuf on xmit"), Tom provided a l4 hash to most outgoing TCP packets. We'd like to provide one as well for SYNACK packets, so that all packets of a given flow share same txhash, to later enable bonding driver to also use skb->hash to perform slave selection. Note that a SYNACK retransmit shuffles the tx hash, as Tom did in commit 265f94ff ("net: Recompute sk_txhash on negative routing advice") for established sockets. This has nice effect making TCP flows resilient to some kind of black holes, even at connection establish phase. Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Catherine Sullivan authored
Bump. Change-ID: If7ce84218361defa209142d1d8c6f69d48c2d7ad Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
Add a facility to recover the result of a previously run AQ command. Change-ID: I21afec2c20c1a5e6ba60c7fbfcbedfff78c10e45 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Shannon Nelson authored
Add a facility to run AQ commands through the nvmupdate utility in order to allow the update tools to interact with the FW and do special commands needed for updates and configuration changes. Change-ID: I5c41523e4055b37f8e4ee479f7a0574368f4a588 Signed-off-by:
-
Shannon Nelson authored
This adds wait states to the NVM update state machine to signify when waiting for an update operation to finish, whether we're in the middle of a set of Write operations, or we're now idle but waiting. Change-ID: Iabe91d6579ef6a2ea560647e374035656211ab43 Signed-off-by:
-
Shannon Nelson authored
This adds a new GetStatus command so that the NVM update tool can query the current status instead of doing fake write requests to probe for readiness. Change-ID: I671ec6ccd4dfc9dbac3a03b964589d693fda5cd8 Signed-off-by:
-
