- 05 Sep, 2024 9 commits
-
-
Arkadiusz Kubalewski authored
Execution of command: ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml / --subscribe "monitor" --sleep 10 fails with: File "/repo/./tools/net/ynl/cli.py", line 109, in main ynl.check_ntf() File "/repo/tools/net/ynl/lib/ynl.py", line 924, in check_ntf op = self.rsp_by_value[nl_msg.cmd()] KeyError: 19 Parsing Generic Netlink notification messages performs lookup for op in the message. The message was not yet decoded, and is not yet considered GenlMsg, thus msg.cmd() returns Generic Netlink family id (19) instead of proper notification command id (i.e.: DPLL_CMD_PIN_CHANGE_NTF=13). Allow the op to be obtained within NetlinkProtocol.decode(..) itself if the op was not passed to the decode function, thus allow parsing of Generic Netlink notifications without causing the failure. Suggested-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/netdev/m2le0n5xpn.fsf@gmail.com/ Fixes: 0a966d60 ("tools/net/ynl: Fix extack decoding for directional ops") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20240904135034.316033-1-arkadiusz.kubalewski@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vadim Fedorenko authored
While checking the latest series for ptp_ocp driver I realised that MAINTAINERS file has wrong item about email on linux.dev domain. Fixes: 795fd934 ("ptp_ocp: adjust MAINTAINERS and mailmap") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240904131855.559078-1-vadim.fedorenko@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jamie Bainbridge authored
bind_wildcard is compiled but not run, bind_timewait is not compiled. These two tests complete in a very short time, use the test harness properly, and seem reasonable to enable. The author of the tests confirmed via email that these were intended to be run. Enable these two tests. Fixes: 13715acf ("selftest: Add test for bind() conflicts.") Fixes: 2c042e8e ("tcp: Add selftest for bind() and TIME_WAIT.") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/5a009b26cf5fb1ad1512d89c61b37e2fac702323.1725430322.git.jamie.bainbridge@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Pawel Dembicki authored
CAPT block (CPU Capture Buffer) have 7 sublocks: 0-3, 4, 6, 7. Function 'vsc73xx_is_addr_valid' allows to use only block 0 at this moment. This patch fix it. Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240903203340.1518789-1-paweldembicki@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Toke Høiland-Jørgensen authored
In sch_cake, we keep track of the count of active bulk flows per host, when running in dst/src host fairness mode, which is used as the round-robin weight when iterating through flows. The count of active bulk flows is updated whenever a flow changes state. This has a peculiar interaction with the hash collision handling: when a hash collision occurs (after the set-associative hashing), the state of the hash bucket is simply updated to match the new packet that collided, and if host fairness is enabled, that also means assigning new per-host state to the flow. For this reason, the bulk flow counters of the host(s) assigned to the flow are decremented, before new state is assigned (and the counters, which may not belong to the same host anymore, are incremented again). Back when this code was introduced, the host fairness mode was always enabled, so the decrement was unconditional. When the configuration flags were introduced the *increment* was made conditional, but the *decrement* was not. Which of course can lead to a spurious decrement (and associated wrap-around to U16_MAX). AFAICT, when host fairness is disabled, the decrement and wrap-around happens as soon as a hash collision occurs (which is not that common in itself, due to the set-associative hashing). However, in most cases this is harmless, as the value is only used when host fairness mode is enabled. So in order to trigger an array overflow, sch_cake has to first be configured with host fairness disabled, and while running in this mode, a hash collision has to occur to cause the overflow. Then, the qdisc has to be reconfigured to enable host fairness, which leads to the array out-of-bounds because the wrapped-around value is retained and used as an array index. It seems that syzbot managed to trigger this, which is quite impressive in its own right. This patch fixes the issue by introducing the same conditional check on decrement as is used on increment. The original bug predates the upstreaming of cake, but the commit listed in the Fixes tag touched that code, meaning that this patch won't apply before that. Fixes: 71263992 ("sch_cake: Make the dual modes fairer") Reported-by: syzbot+7fe7b81d602cc1e6b94d@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20240903160846.20909-1-toke@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Document what was discussed multiple times on list and various virtual / in-person conversations. guard() being okay in functions <= 20 LoC is a bit of my own invention. If the function is trivial it should be fine, but feel free to disagree :) We'll obviously revisit this guidance as time passes and we and other subsystems get more experience. Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240830171443.3532077-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== ice: fix synchronization between .ndo_bpf() and reset Larysa Zaremba says: PF reset can be triggered asynchronously, by tx_timeout or by a user. With some unfortunate timings both ice_vsi_rebuild() and .ndo_bpf will try to access and modify XDP rings at the same time, causing system crash. The first patch factors out rtnl-locked code from VSI rebuild code to avoid deadlock. The following changes lock rebuild and .ndo_bpf() critical sections with an internal mutex as well and provide complementary fixes. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: do not bring the VSI up, if it was down before the XDP setup ice: remove ICE_CFG_BUSY locking from AF_XDP code ice: check ICE_VSI_DOWN under rtnl_lock when preparing for reset ice: check for XDP rings instead of bpf program when unconfiguring ice: protect XDP configuration with a mutex ice: move netif_queue_set_napi to rtnl-protected sections ==================== Link: https://patch.msgid.link/20240903183034.3530411-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.11 Hopefully final fixes for v6.11 and this time only fixes to ath11k driver. We need to revert hibernation support due to reported regressions and we have a fix for kernel crash introduced in v6.11-rc1. * tag 'wireless-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: MAINTAINERS: wifi: cw1200: add net-cw1200.h Revert "wifi: ath11k: support hibernation" Revert "wifi: ath11k: restore country code during resume" wifi: ath11k: fix NULL pointer dereference in ath11k_mac_get_eirp_power() ==================== Link: https://patch.msgid.link/20240904135906.5986EC4CECA@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Sean Anderson authored
axienet_dma_err_handler can race with axienet_stop in the following manner: CPU 1 CPU 2 ====================== ================== axienet_stop() napi_disable() axienet_dma_stop() axienet_dma_err_handler() napi_disable() axienet_dma_stop() axienet_dma_start() napi_enable() cancel_work_sync() free_irq() Fix this by setting a flag in axienet_stop telling axienet_dma_err_handler not to bother doing anything. I chose not to use disable_work_sync to allow for easier backporting. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Link: https://patch.msgid.link/20240903175141.4132898-1-sean.anderson@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 04 Sep, 2024 5 commits
-
-
Jonas Gorski authored
When userspace wants to take over a fdb entry by setting it as EXTERN_LEARNED, we set both flags BR_FDB_ADDED_BY_EXT_LEARN and BR_FDB_ADDED_BY_USER in br_fdb_external_learn_add(). If the bridge updates the entry later because its port changed, we clear the BR_FDB_ADDED_BY_EXT_LEARN flag, but leave the BR_FDB_ADDED_BY_USER flag set. If userspace then wants to take over the entry again, br_fdb_external_learn_add() sees that BR_FDB_ADDED_BY_USER and skips setting the BR_FDB_ADDED_BY_EXT_LEARN flags, thus silently ignores the update. Fix this by always allowing to set BR_FDB_ADDED_BY_EXT_LEARN regardless if this was a user fdb entry or not. Fixes: 710ae728 ("net: bridge: Mark FDB entries that were added by user as such") Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20240903081958.29951-1-jonas.gorski@bisdn.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hayes Wang authored
generic_ocp_write() asks the parameter "size" must be 4 bytes align. Therefore, write the bp would fail, if the mac->bp_num is odd. Align the size to 4 for fixing it. The way may write an extra bp, but the rtl8152_is_fw_mac_ok() makes sure the value must be 0 for the bp whose index is more than mac->bp_num. That is, there is no influence for the firmware. Besides, I check the return value of generic_ocp_write() to make sure everything is correct. Fixes: e5c266a6 ("r8152: set bp in bulk") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Link: https://patch.msgid.link/20240903063333.4502-1-hayeswang@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
We observed a null-ptr-deref in fou_gro_receive() while shutting down a host. [0] The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol in struct fou. When fou_release() is called due to netns dismantle or explicit tunnel teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data. Then, the tunnel socket is destroyed after a single RCU grace period. So, in-flight udp4_gro_receive() could find the socket and execute the FOU GRO handler, where sk->sk_user_data could be NULL. Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL checks in FOU GRO handlers. [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0 SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1 Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017 RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou] Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42 RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010 RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08 RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002 R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400 R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0 FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? no_context (arch/x86/mm/fault.c:752) ? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483) ? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571) ? fou_gro_receive (net/ipv4/fou.c:233) [fou] udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559) udp4_gro_receive (net/ipv4/udp_offload.c:604) inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7)) dev_gro_receive (net/core/dev.c:6035 (discriminator 4)) napi_gro_receive (net/core/dev.c:6170) ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena] ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena] napi_poll (net/core/dev.c:6847) net_rx_action (net/core/dev.c:6917) __do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299) asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809) </IRQ> do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77) irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435) common_interrupt (arch/x86/kernel/irq.c:239) asm_common_interrupt (arch/x86/include/asm/idtentry.h:626) RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575) Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246 RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900 RDX: ffff93daee800000 RSI: ffff93daee87dc00 RDI: ffff93daee87dc64 RBP: 0000000000000001 R08: ffffffffb5e7b6c0 R09: 0000000000000044 R10: ffff93daee831b04 R11: 00000000000001cd R12: 0000000000000001 R13: ffffffffb5e7b740 R14: 0000000000000001 R15: 0000000000000000 ? sched_clock_cpu (kernel/sched/clock.c:371) acpi_idle_enter (drivers/acpi/processor_idle.c:712 (discriminator 3)) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:237) cpuidle_enter (drivers/cpuidle/cpuidle.c:353) cpuidle_idle_call (kernel/sched/idle.c:158 kernel/sched/idle.c:239) do_idle (kernel/sched/idle.c:302) cpu_startup_entry (kernel/sched/idle.c:395 (discriminator 1)) start_kernel (init/main.c:1048) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:310) Modules linked in: udp_diag tcp_diag inet_diag nft_nat ipip tunnel4 dummy fou ip_tunnel nft_masq nft_chain_nat nf_nat wireguard nft_ct curve25519_x86_64 libcurve25519_generic nf_conntrack libchacha20poly1305 nf_defrag_ipv6 nf_defrag_ipv4 nft_objref chacha_x86_64 nft_counter nf_tables nfnetlink poly1305_x86_64 ip6_udp_tunnel udp_tunnel libchacha crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper mousedev psmouse button ena ptp pps_core crc32c_intel CR2: 0000000000000008 Fixes: d92283e3 ("fou: change to use UDP socket GRO") Reported-by: Alphonse Kurian <alkurian@amazon.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20240902173927.62706-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Guillaume Nault authored
Bareudp devices update their stats concurrently. Therefore they need proper atomic increments. Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/04b7b9d0b480158eb3ab4366ec80aa2ab7e41fcb.1725031794.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Souradeep Chakrabarti authored
Currently napi_disable() gets called during rxq and txq cleanup, even before napi is enabled and hrtimer is initialized. It causes kernel panic. ? page_fault_oops+0x136/0x2b0 ? page_counter_cancel+0x2e/0x80 ? do_user_addr_fault+0x2f2/0x640 ? refill_obj_stock+0xc4/0x110 ? exc_page_fault+0x71/0x160 ? asm_exc_page_fault+0x27/0x30 ? __mmdrop+0x10/0x180 ? __mmdrop+0xec/0x180 ? hrtimer_active+0xd/0x50 hrtimer_try_to_cancel+0x2c/0xf0 hrtimer_cancel+0x15/0x30 napi_disable+0x65/0x90 mana_destroy_rxq+0x4c/0x2f0 mana_create_rxq.isra.0+0x56c/0x6d0 ? mana_uncfg_vport+0x50/0x50 mana_alloc_queues+0x21b/0x320 ? skb_dequeue+0x5f/0x80 Cc: stable@vger.kernel.org Fixes: e1b5683f ("net: mana: Move NAPI from EQ to CQ") Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Sep, 2024 23 commits
-
-
Tze-nan Wu authored
There's a potential race when `cgroup_bpf_enabled(CGROUP_GETSOCKOPT)` is false during the execution of `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN`, but becomes true when `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is called. This inconsistency can lead to `BPF_CGROUP_RUN_PROG_GETSOCKOPT` receiving an "-EFAULT" from `__cgroup_bpf_run_filter_getsockopt(max_optlen=0)`. Scenario shown as below: `process A` `process B` ----------- ------------ BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN enable CGROUP_GETSOCKOPT BPF_CGROUP_RUN_PROG_GETSOCKOPT (-EFAULT) To resolve this, remove the `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN` macro and directly uses `copy_from_sockptr` to ensure that `max_optlen` is always set before `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is invoked. Fixes: 0d01da6a ("bpf: implement getsockopt and setsockopt hooks") Co-developed-by: Yanghui Li <yanghui.li@mediatek.com> Signed-off-by: Yanghui Li <yanghui.li@mediatek.com> Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com> Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com> Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Acked-by: Alexei Starovoitov <ast@kernel.org> Link: https://patch.msgid.link/20240830082518.23243-1-Tze-nan.Wu@mediatek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Breno Leitao authored
When CONFIG_DQL is not enabled, dql_group should be treated as a dead declaration. However, its current extern declaration assumes the linker will ignore it, which is generally true across most compiler and architecture combinations. But in certain cases, the linker still attempts to resolve the extern struct, even when the associated code is dead, resulting in a linking error. For instance the following error in loongarch64: >> loongarch64-linux-ld: net-sysfs.c:(.text+0x589c): undefined reference to `dql_group' Modify the declaration of the dead object to be an empty declaration instead of an extern. This change will prevent the linker from attempting to resolve an undefined reference. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409012047.eCaOdfQJ-lkp@intel.com/ Fixes: 74293ea1 ("net: sysfs: Do not create sysfs for non BQL device") Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Link: https://patch.msgid.link/20240902101734.3260455-1-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Stephen Hemminger authored
If netem_dequeue() enqueues packet to inner qdisc and that qdisc returns __NET_XMIT_STOLEN. The packet is dropped but qdisc_tree_reduce_backlog() is not called to update the parent's q.qlen, leading to the similar use-after-free as Commit e04991a48dbaf382 ("netem: fix return value if duplicate enqueue fails") Commands to trigger KASAN UaF: ip link add type dummy ip link set lo up ip link set dummy0 up tc qdisc add dev lo parent root handle 1: drr tc filter add dev lo parent 1: basic classid 1:1 tc class add dev lo classid 1:1 drr tc qdisc add dev lo parent 1:1 handle 2: netem tc qdisc add dev lo parent 2: handle 3: drr tc filter add dev lo parent 3: basic classid 3:1 action mirred egress redirect dev dummy0 tc class add dev lo classid 3:1 drr ping -c1 -W0.01 localhost # Trigger bug tc class del dev lo classid 1:1 tc class add dev lo classid 1:1 drr ping -c1 -W0.01 localhost # UaF Fixes: 50612537 ("netem: fix classful handling") Reported-by: Budimir Markovic <markovicbudimir@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Link: https://patch.msgid.link/20240901182438.4992-1-stephen@networkplumber.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Oliver Neukum authored
The driver generates a random MAC once on load and uses it over and over, including on two devices needing a random MAC at the same time. Jakub suggested revamping the driver to the modern API for setting a random MAC rather than fixing the old stuff. The bug is as old as the driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Simon Horman authored
This is part of an effort [1] to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" in their name. [1] https://lore.kernel.org/netdev/20240821-net-mnt-v2-0-59a5af38e69d@kernel.org/ It seems that net-cw1200.h is part of the CW1200 WLAN driver and this it is appropriate to add it to the section for that driver. Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240902-wifi-mnt-v2-1-f5ad1f36e993@kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/ath/athKalle Valo authored
ath.git patches for v6.11-rc7 We have three patch which address two issues in the ath11k driver which should be addressed for 6.11-rc7: One patch fixes a NULL pointer dereference while parsing transmit power envelope (TPE) information, and the other two patches revert the hibernation support since it is interfering with suspend on some platforms. Note the cause of the suspend wakeups is still being investigated, and it is hoped this can be addressed and hibernation support can be restored in the near future.
-
Larysa Zaremba authored
After XDP configuration is completed, we bring the interface up unconditionally, regardless of its state before the call to .ndo_bpf(). Preserve the information whether the interface had to be brought down and later bring it up only in such case. Fixes: efc2214b ("ice: Add support for XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Larysa Zaremba authored
Locking used in ice_qp_ena() and ice_qp_dis() does pretty much nothing, because ICE_CFG_BUSY is a state flag that is supposed to be set in a PF state, not VSI one. Therefore it does not protect the queue pair from e.g. reset. Remove ICE_CFG_BUSY locking from ice_qp_dis() and ice_qp_ena(). Fixes: 2d4238f5 ("ice: Add support for AF_XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Larysa Zaremba authored
Consider the following scenario: .ndo_bpf() | ice_prepare_for_reset() | ________________________|_______________________________________| rtnl_lock() | | ice_down() | | | test_bit(ICE_VSI_DOWN) - true | | ice_dis_vsi() returns | ice_up() | | | proceeds to rebuild a running VSI | .ndo_bpf() is not the only rtnl-locked callback that toggles the interface to apply new configuration. Another example is .set_channels(). To avoid the race condition above, act only after reading ICE_VSI_DOWN under rtnl_lock. Fixes: 0f9d5027 ("ice: Refactor VSI allocation, deletion and rebuild flow") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Larysa Zaremba authored
If VSI rebuild is pending, .ndo_bpf() can attach/detach the XDP program on VSI without applying new ring configuration. When unconfiguring the VSI, we can encounter the state in which there is an XDP program but no XDP rings to destroy or there will be XDP rings that need to be destroyed, but no XDP program to indicate their presence. When unconfiguring, rely on the presence of XDP rings rather then XDP program, as they better represent the current state that has to be destroyed. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Larysa Zaremba authored
The main threat to data consistency in ice_xdp() is a possible asynchronous PF reset. It can be triggered by a user or by TX timeout handler. XDP setup and PF reset code access the same resources in the following sections: * ice_vsi_close() in ice_prepare_for_reset() - already rtnl-locked * ice_vsi_rebuild() for the PF VSI - not protected * ice_vsi_open() - already rtnl-locked With an unfortunate timing, such accesses can result in a crash such as the one below: [ +1.999878] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 14 [ +2.002992] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 18 [Mar15 18:17] ice 0000:b1:00.0 ens801f0np0: NETDEV WATCHDOG: CPU: 38: transmit queue 14 timed out 80692736 ms [ +0.000093] ice 0000:b1:00.0 ens801f0np0: tx_timeout: VSI_num: 6, Q 14, NTC: 0x0, HW_HEAD: 0x0, NTU: 0x0, INT: 0x4000001 [ +0.000012] ice 0000:b1:00.0 ens801f0np0: tx_timeout recovery level 1, txqueue 14 [ +0.394718] ice 0000:b1:00.0: PTP reset successful [ +0.006184] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ +0.000045] #PF: supervisor read access in kernel mode [ +0.000023] #PF: error_code(0x0000) - not-present page [ +0.000023] PGD 0 P4D 0 [ +0.000018] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000023] CPU: 38 PID: 7540 Comm: kworker/38:1 Not tainted 6.8.0-rc7 #1 [ +0.000031] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000036] Workqueue: ice ice_service_task [ice] [ +0.000183] RIP: 0010:ice_clean_tx_ring+0xa/0xd0 [ice] [...] [ +0.000013] Call Trace: [ +0.000016] <TASK> [ +0.000014] ? __die+0x1f/0x70 [ +0.000029] ? page_fault_oops+0x171/0x4f0 [ +0.000029] ? schedule+0x3b/0xd0 [ +0.000027] ? exc_page_fault+0x7b/0x180 [ +0.000022] ? asm_exc_page_fault+0x22/0x30 [ +0.000031] ? ice_clean_tx_ring+0xa/0xd0 [ice] [ +0.000194] ice_free_tx_ring+0xe/0x60 [ice] [ +0.000186] ice_destroy_xdp_rings+0x157/0x310 [ice] [ +0.000151] ice_vsi_decfg+0x53/0xe0 [ice] [ +0.000180] ice_vsi_rebuild+0x239/0x540 [ice] [ +0.000186] ice_vsi_rebuild_by_type+0x76/0x180 [ice] [ +0.000145] ice_rebuild+0x18c/0x840 [ice] [ +0.000145] ? delay_tsc+0x4a/0xc0 [ +0.000022] ? delay_tsc+0x92/0xc0 [ +0.000020] ice_do_reset+0x140/0x180 [ice] [ +0.000886] ice_service_task+0x404/0x1030 [ice] [ +0.000824] process_one_work+0x171/0x340 [ +0.000685] worker_thread+0x277/0x3a0 [ +0.000675] ? preempt_count_add+0x6a/0xa0 [ +0.000677] ? _raw_spin_lock_irqsave+0x23/0x50 [ +0.000679] ? __pfx_worker_thread+0x10/0x10 [ +0.000653] kthread+0xf0/0x120 [ +0.000635] ? __pfx_kthread+0x10/0x10 [ +0.000616] ret_from_fork+0x2d/0x50 [ +0.000612] ? __pfx_kthread+0x10/0x10 [ +0.000604] ret_from_fork_asm+0x1b/0x30 [ +0.000604] </TASK> The previous way of handling this through returning -EBUSY is not viable, particularly when destroying AF_XDP socket, because the kernel proceeds with removal anyway. There is plenty of code between those calls and there is no need to create a large critical section that covers all of them, same as there is no need to protect ice_vsi_rebuild() with rtnl_lock(). Add xdp_state_lock mutex to protect ice_vsi_rebuild() and ice_xdp(). Leaving unprotected sections in between would result in two states that have to be considered: 1. when the VSI is closed, but not yet rebuild 2. when VSI is already rebuild, but not yet open The latter case is actually already handled through !netif_running() case, we just need to adjust flag checking a little. The former one is not as trivial, because between ice_vsi_close() and ice_vsi_rebuild(), a lot of hardware interaction happens, this can make adding/deleting rings exit with an error. Luckily, VSI rebuild is pending and can apply new configuration for us in a managed fashion. Therefore, add an additional VSI state flag ICE_VSI_REBUILD_PENDING to indicate that ice_xdp() can just hot-swap the program. Also, as ice_vsi_rebuild() flow is touched in this patch, make it more consistent by deconfiguring VSI when coalesce allocation fails. Fixes: 2d4238f5 ("ice: Add support for AF_XDP") Fixes: efc2214b ("ice: Add support for XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Larysa Zaremba authored
Currently, netif_queue_set_napi() is called from ice_vsi_rebuild() that is not rtnl-locked when called from the reset. This creates the need to take the rtnl_lock just for a single function and complicates the synchronization with .ndo_bpf. At the same time, there no actual need to fill napi-to-queue information at this exact point. Fill napi-to-queue information when opening the VSI and clear it when the VSI is being closed. Those routines are already rtnl-locked. Also, rewrite napi-to-queue assignment in a way that prevents inclusion of XDP queues, as this leads to out-of-bounds writes, such as one below. [ +0.000004] BUG: KASAN: slab-out-of-bounds in netif_queue_set_napi+0x1c2/0x1e0 [ +0.000012] Write of size 8 at addr ffff889881727c80 by task bash/7047 [ +0.000006] CPU: 24 PID: 7047 Comm: bash Not tainted 6.10.0-rc2+ #2 [ +0.000004] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000003] Call Trace: [ +0.000003] <TASK> [ +0.000002] dump_stack_lvl+0x60/0x80 [ +0.000007] print_report+0xce/0x630 [ +0.000007] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ +0.000007] ? __virt_addr_valid+0x1c9/0x2c0 [ +0.000005] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000003] kasan_report+0xe9/0x120 [ +0.000004] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000004] netif_queue_set_napi+0x1c2/0x1e0 [ +0.000005] ice_vsi_close+0x161/0x670 [ice] [ +0.000114] ice_dis_vsi+0x22f/0x270 [ice] [ +0.000095] ice_pf_dis_all_vsi.constprop.0+0xae/0x1c0 [ice] [ +0.000086] ice_prepare_for_reset+0x299/0x750 [ice] [ +0.000087] pci_dev_save_and_disable+0x82/0xd0 [ +0.000006] pci_reset_function+0x12d/0x230 [ +0.000004] reset_store+0xa0/0x100 [ +0.000006] ? __pfx_reset_store+0x10/0x10 [ +0.000002] ? __pfx_mutex_lock+0x10/0x10 [ +0.000004] ? __check_object_size+0x4c1/0x640 [ +0.000007] kernfs_fop_write_iter+0x30b/0x4a0 [ +0.000006] vfs_write+0x5d6/0xdf0 [ +0.000005] ? fd_install+0x180/0x350 [ +0.000005] ? __pfx_vfs_write+0x10/0xA10 [ +0.000004] ? do_fcntl+0x52c/0xcd0 [ +0.000004] ? kasan_save_track+0x13/0x60 [ +0.000003] ? kasan_save_free_info+0x37/0x60 [ +0.000006] ksys_write+0xfa/0x1d0 [ +0.000003] ? __pfx_ksys_write+0x10/0x10 [ +0.000002] ? __x64_sys_fcntl+0x121/0x180 [ +0.000004] ? _raw_spin_lock+0x87/0xe0 [ +0.000005] do_syscall_64+0x80/0x170 [ +0.000007] ? _raw_spin_lock+0x87/0xe0 [ +0.000004] ? __pfx__raw_spin_lock+0x10/0x10 [ +0.000003] ? file_close_fd_locked+0x167/0x230 [ +0.000005] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000005] ? do_syscall_64+0x8c/0x170 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? fput+0x1a/0x2c0 [ +0.000004] ? filp_close+0x19/0x30 [ +0.000004] ? do_dup2+0x25a/0x4c0 [ +0.000004] ? __x64_sys_dup2+0x6e/0x2e0 [ +0.000002] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? __count_memcg_events+0x113/0x380 [ +0.000005] ? handle_mm_fault+0x136/0x820 [ +0.000005] ? do_user_addr_fault+0x444/0xa80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000002] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000005] RIP: 0033:0x7f2033593154 Fixes: 080b0c8d ("ice: Fix ASSERT_RTNL() warning during certain scenarios") Fixes: 91fdbce7 ("ice: Add support in the driver for associating queue with napi") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Paolo Abeni authored
Vadim Fedorenko says: ==================== ptp: ocp: fix serial port information export Starting v6.8 the serial port subsystem changed the hierarchy of devices and symlinks are not working anymore. Previous discussion made it clear that the idea of symlinks for tty devices was wrong by design [1]. This series implements additional attributes to expose the information and removes symlinks for tty devices. [1] https://lore.kernel.org/netdev/2024060503-subsonic-pupil-bbee@gregkh/ v6 -> v7: - fix issues with applying patches v5 -> v6: - split conversion to array to separate patch per Jiri's feedback - move changelog to cover letter v4 -> v5: - remove unused variable in ptp_ocp_tty_show v3 -> v4: - re-organize info printing to use ptp_ocp_tty_port_name() - keep uintptr_t to be consistent with other code v2 -> v3: - replace serial ports definitions with array and enum for index - replace pointer math with direct array access - nit in documentation spelling v1 -> v2: - add Documentation/ABI changes ==================== Link: https://patch.msgid.link/20240829183603.1156671-1-vadfed@meta.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Vadim Fedorenko authored
Update documentation according to the changes in the driver. New attributes group tty is exposed and ttyGNSS, ttyGNSS2, ttyMAC and ttyNMEA are moved to this group. Also, these attributes are no more links to the devices but rather simple text files containing names of tty devices. Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Vadim Fedorenko authored
Implement additional attribute group to expose serial port information. Fixes tag points to the commit which introduced the change in serial port subsystem and made it impossible to use symlinks. Fixes: b286f4e8 ("serial: core: Move tty and serdev to be children of serial core port device") Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Vadim Fedorenko authored
Simplify serial port management code by using array of ports and helpers to get the name of the port. This change is needed to make the next patch simplier. Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jinjie Ruan authored
The call of of_get_child_by_name() will cause refcount incremented for leds, if it succeeds, it should call of_node_put() to decrease it, fix it. Fixes: 01e5b728 ("net: phy: Add a binding for PHY LEDs") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240830022025.610844-1-ruanjinjie@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Roger Quadros says: ==================== net: ethernet: ti: am65-cpsw: Fix XDP implementation The XDP implementation on am65-cpsw driver is broken in many ways and this series fixes it. Below are the current issues that are being fixed: 1) The following XDP_DROP test from [1] stalls the interface after 250 packets. ~# xdb-bench drop -m native eth0 This is because new RX requests are never queued. Fix that. 2) The below XDP_TX test from [1] fails with a warning [ 499.947381] XDP_WARN: xdp_update_frame_from_buff(line:277): Driver BUG: missing reserved tailroom ~# xdb-bench tx -m native eth0 Fix that by using PAGE_SIZE during xdp_init_buf(). 3) In XDP_REDIRECT case only 1 packet was processed in rx_poll. Fix it to process up to budget packets. ~# ./xdp-bench redirect -m native eth0 eth0 4) If number of TX queues are set to 1 we get a NULL pointer dereference during XDP_TX. ~# ethtool -L eth0 tx 1 ~# ./xdp-trafficgen udp -A <ipv6-src> -a <ipv6-dst> eth0 -t 2 Transmitting on eth0 (ifindex 2) [ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 5) Net statistics is broken for XDP_TX and XDP_REDIRECT [1] xdp-tools suite https://github.com/xdp-project/xdp-toolsSigned-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Julien Panis <jpanis@baylibre.com> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> --- ==================== Link: https://patch.msgid.link/20240829-am65-cpsw-xdp-v1-0-ff3c81054a5e@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Roger Quadros authored
We are not using ndev->stats for rx_packets and rx_bytes anymore. Instead, we use per CPU stats which are collated in am65_cpsw_nuss_ndo_get_stats(). Fix RX statistics for XDP_TX and XDP_REDIRECT cases. Fixes: 8acacc40 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Julien Panis <jpanis@baylibre.com> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Roger Quadros authored
If number of TX queues are set to 1 we get a NULL pointer dereference during XDP_TX. ~# ethtool -L eth0 tx 1 ~# ./xdp-trafficgen udp -A <ipv6-src> -a <ipv6-dst> eth0 -t 2 Transmitting on eth0 (ifindex 2) [ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 Fix this by using actual TX queues instead of max TX queues when picking the TX channel in am65_cpsw_ndo_xdp_xmit(). Fixes: 8acacc40 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Julien Panis <jpanis@baylibre.com> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Roger Quadros authored
The following XDP_DROP test from [1] stalls the interface after 250 packets. ~# xdb-bench drop -m native eth0 This is because new RX requests are never queued. Fix that. The below XDP_TX test from [1] fails with a warning [ 499.947381] XDP_WARN: xdp_update_frame_from_buff(line:277): Driver BUG: missing reserved tailroom ~# xdb-bench tx -m native eth0 Fix that by using PAGE_SIZE during xdp_init_buf(). In XDP_REDIRECT case only 1 packet was processed in rx_poll. Fix it to process up to budget packets. Fix all XDP error cases to call trace_xdp_exception() and drop the packet in am65_cpsw_run_xdp(). [1] xdp-tools suite https://github.com/xdp-project/xdp-tools Fixes: 8acacc40 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Julien Panis <jpanis@baylibre.com> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - qca: If memdump doesn't work, re-enable IBS - MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT - Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE" - MGMT: Ignore keys being loaded with invalid type * tag 'for-net-2024-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: MGMT: Ignore keys being loaded with invalid type Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE" Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once Bluetooth: qca: If memdump doesn't work, re-enable IBS ==================== Link: https://patch.msgid.link/20240830220300.1316772-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-6.11-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2024-08-30 The first patch is by Kuniyuki Iwashima for the CAN BCM protocol that adds a missing proc entry removal when a device unregistered. Simon Horman fixes the cleanup in the error cleanup path of the m_can driver's open function. Markus Schneider-Pargmann contributes 7 fixes for the m_can driver, all related to the recently added IRQ coalescing support. The next 2 patches are by me, target the mcp251xfd driver and fix ring and coalescing configuration problems when switching from CAN-CC to CAN-FD mode. Simon Arlott's patch fixes a possible deadlock in the mcp251x driver. The last patch is by Martin Jocic for the kvaser_pciefd driver and fixes a problem with lost IRQs, which result in starvation, under high load situations. * tag 'linux-can-fixes-for-6.11-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: kvaser_pciefd: Use a single write when releasing RX buffers can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open can: mcp251xfd: mcp251xfd_ring_init(): check TX-coalescing configuration can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode can: m_can: Limit coalescing to peripheral instances can: m_can: Reset cached active_interrupts on start can: m_can: disable_all_interrupts, not clear active_interrupts can: m_can: Do not cancel timer from within timer can: m_can: Remove m_can_rx_peripheral indirection can: m_can: Remove coalesing disable in isr during suspend can: m_can: Reset coalescing during suspend/resume can: m_can: Release irq on error in m_can_open can: bcm: Remove proc entry when dev is unregistered. ==================== Link: https://patch.msgid.link/20240830215914.1610393-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 02 Sep, 2024 3 commits
-
-
Baochen Qiang authored
This reverts commit 166a490f. There are several reports that this commit breaks system suspend on some specific Lenovo platforms. Since there is no fix available, for now revert this commit to make suspend work again on those platforms. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219196 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2301921 Cc: <stable@vger.kernel.org> # 6.10.x: d3e154d7: Revert "wifi: ath11k: restore country code during resume" Cc: <stable@vger.kernel.org> # 6.10.x Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240830073420.5790-3-quic_bqiang@quicinc.com
-
Baochen Qiang authored
This reverts commit 7f0343b7. We are going to revert commit 166a490f ("wifi: ath11k: support hibernation"), on which this commit depends. With that commit reverted, this one is not needed any more, so revert this commit first. Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240830073420.5790-2-quic_bqiang@quicinc.com
-
Dan Carpenter authored
Call rtnl_unlock() on this error path, before returning. Fixes: bc23aa94 ("igc: Add pcie error handler support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-